Пікірлер

• 
  @wilhelm002222 сағат бұрын

  I just love shell ejecting airsoft guns!

• 
  @KarciJeKralSvetaКүн бұрын

  Ok so which one is the best ?

• 
  @AirsoftinBangladesh4 күн бұрын

  What's the name of small screw I can't find it

• 
  @wilhelm00224 күн бұрын

  Thanks, you helped me so much!

• 
  @DataLog4 күн бұрын

  WE tec in Umarex is a no no. It's much weaker. The valve is stiffer.

• 
  @ryanandandreagrendus31697 күн бұрын

  At the 13:40 mark on the video you talked about what single and double action is, you are right as to the description of what’s happening with single and double action BUT you said there’s no difference using the gun or any gun for that matter single or double action. There is a big reason why one is different in its use, with double action you are cocking the hammer and firing the gun therefore it takes far more pull strength on the trigger compared to single where you cock the hammer first anda when taking the shot you are only releasing the hammer, much lighter trigger pull and so your accuracy goes up, there’s a little piece of info.

• 
  @michaelphipps48357 күн бұрын

  One of my favorite ammo boxes….. can hold over 300 shotgun shells.

• 
  @williand.52911 күн бұрын

  Do you know any web site where i can buy this airsoft gun? Do you have any suggestions for buying it? Thanks

• 
  @Renjoka14 күн бұрын

  where did you get the strike device thats on the KJW glock? been looking for one forever

• 
  @ShefwEli300A14 күн бұрын

  Link to the Extended Magazine

• 
  @ShefwEli300A14 күн бұрын

  Link to the mag pls

• 
  @tudor959025 күн бұрын

  What is the name of the silencer?

• 
  @matt800m626 күн бұрын

  Can you do a video on your We Tech G27 6mm airsoft gun I’m trying to find a good over seas site I’m also In Chicago hope it will get through. Thanks

• 
  @AB-by9tp27 күн бұрын

  U r a life saver.. people are still benefiting from the video.

• 
  @suhedakural7306Ай бұрын

  Would Wd-40 silicone work?

• 
  @younglordfattmaccАй бұрын

  Just a heads up on the sr25, the mosfet shuts the gun off after 30 mins of not shooting. It's not a big deal, but in between games it could shut off. Just unplug the battery and plug your battery back in. My buddy and I thought his was broken until we was informed of this.

• 
  @user-vd5rx3mz1kАй бұрын

  Is the we tech m16a3 bad or good, i have heard the internals are very weak and they don't last long, what do you say? Im looking into a we tech or a vfc but the thing i don't like about the vfc is that the full auto is slow asf.

• 
  @GpRrAiNnTdleАй бұрын

  Would love to know which replacement mags to buy for this. I’ve had this gun for years but the mag has always been leaky

• 
  @kanewilson3591Ай бұрын

  So many real steel shooters getting hella confused in these comments

• 
  @bornjamerican52Ай бұрын

  The color is 🔥🔥🔥🔥🔥

• 
  @TheBoulKashАй бұрын

  Will it work on a Glock made Glock?!? 😂

• 
  @pedrotome9119Ай бұрын

  It is a very realistic toy. Marushin also makes this model, with the shells ejecting system, they got other models too. This model has the trade marks and serial numbers like the real steel one.

• 
  @jrmfacts6646Ай бұрын

  Sick🔥👍🏽

• 
  @codywiloiams5119Ай бұрын

  What mm is it

• 
  @kmkcopkillerАй бұрын

  I hate airsoft guns....90% are built like crap and green gas absolutely sucks compared to co2 yet they still use it so much...the metal .177 bb guns are much better quality ive found but obviously you cant shoot other people with the metal bbs like you can with the plastic airsoft ones. I think theyre starting to make plastic .177 though. And electric air guns just sound stupid af and the batteries suck.

• 
  @Krystal_Hakymei2 ай бұрын

  *doom music intensifies*

• 
  @Sippinlean4902 ай бұрын

  She looks good

• 
  @MaxCherepeninАй бұрын

  Thanks bro!

• 
  @Sippinlean4902 ай бұрын

  Such a good review dude 💯

• 
  @Rattlehead-gy9ct2 ай бұрын

  nice shirt

• 
  @ZamireHouston2 ай бұрын

  Can u use c02 for it

• 
  @MaxCherepeninАй бұрын

  Green gas or propane only.

• 
  @Thesonic3372 ай бұрын

  You are a life saver! Thank you! it works!

• 
  @ericatkinson54332 ай бұрын

  You HAVE to remove the tip if you want to add a tracer. There's just no other way. I suppose you could always paint the tracer orange if you really wanted to...

• 
  @noelcarillo77942 ай бұрын

  How to order and how much?tanx gud pm

• 
  @steen2752 ай бұрын

  The few WE guns i actually like

• 
  @masonLong-eo2sg2 ай бұрын

  where did you get the mag ?

• 
  @DapDapMemes2 ай бұрын

  Not vevery Professional to close one eye just wanna say ;) would be more serious with both eyes open

• 
  @sogerc12 ай бұрын

  I would argue that these trishot shotguns have their own charm, it's not just a beginner gun, I just bought one and it was my 32nd purchase (incl. stuff that broke, I sold, everything)

• 
  @EditorKalandr__2 ай бұрын

  3:31 how has that gun treated you over the years?

• 
  @EditorKalandr__2 ай бұрын

  Nothing was boring about this video, buddy. Don’t even worry about it.

• 
  @randomness60102 ай бұрын

  Ive been considering on buying the A&K M60 and adding the polarstar m60 fusion drop in kit. Any thoughts on this?

• 
  @Subscribeorelse...2 ай бұрын

  Can you put a suppressor on it

• 
  @MaxCherepenin2 ай бұрын

  Yes, it comes with factory threaded tip.

• 
  @TheRealDRS2172 ай бұрын

  I know it's a airsoft pellet/bb gun

• 
  @theripper16932 ай бұрын

  Theoretically what if you put a 5.56 upper on it😂

• 
  @pedrotome91192 ай бұрын

  Hello and thanks for the video. Quite interesting and well made comparison. I am in Europe and I did never see a Stark Arms replica of any kind. I am convinced that most of the (deeply confusing, by the way) replicas brands are all made in 2 or 3 facilities... With maybe the exception of the Japanese brands, but I do not know for sure, as Japanese airsoft replicas do not get here with the exception of Tokyo Marui, and once in 5 years, KSC... Model guns are forbidden here as are blank guns, with very fews exceptions too. So, brands, when visible on the model, does not proof to me, that the brand is only that brand's maker... I may be wrong, but if someone knows better, please let me know!!! Meanwhile I wish you the best!!!

• 
  @drehill3172 ай бұрын

  What state are you in

• 
  @danielhendley98782 ай бұрын

  Have you tried the shells by matrix?

• 
  @habibisniping3 ай бұрын

  Where did you buy it from:

• 
  @MaxCherepenin3 ай бұрын

  Airsplat.com when they existed like 10-12 years ago lol. Now you have to order from evike or overseas. We tech will be overseas.

• 
  @JuanGomez-mz5fs3 ай бұрын

  My Remington 1911 RAC stops shooting after 1 BB. Is there something wrong with Mag you think?

• 
  @MaxCherepenin3 ай бұрын

  Could be, I have the exact issue with this one now, it’s a bad valve in the mag, it does not charge the gas correctly and only takes in enough to fire one or two shots. You can try getting a new mag to test that theory, if its not that, check that everything else engages like the trigger, hammer, etc, then check the blow back housing unit, make sure none of the piston springs are missing or bent.

• 
  @anthonyestrada13833 ай бұрын

  Want to sell

• 
  @thatonesnake8102Ай бұрын

  I got one, how much are you paying?

• 
  @Chris_hansen_official3 ай бұрын

  On yours mate does both firing pins come out at equal lengths or does the right pin sit back in the receiver a tiny bit

• 
  @MaxCherepenin3 ай бұрын

  Hmm, good question. I’ll have to check when I get home today. If you don’t hear back, just shoot me another comment so I see the notification. I can check.

• 
  @Chris_hansen_official3 ай бұрын

  @@MaxCherepenin too easy

• 
  @Chris_hansen_official3 ай бұрын

  @@MaxCherepenin how'd ya go