it is nice and great explanation video and useful for petroleum engineering

for reverse intake pump with hi GOR you said the separated gas travel up and exit at the wellhead, but we have the ESP PKR set, how will it happen?

Well done boss, please can you make a video on the difference between wellhead PCP and wellhead ESP

Morning . Please Can you give us the mechanical characteristics of the Esp pump??

Can you Explain about how we can control the fluid in subsurface, and what Will we know about the Gas enter to submersible.

Excelente

Its great video for Petroleum Engineer , could you make video about Selection of Artificial Lift : Advantages and Disadvantages (Limitation of every Artificial Lift), thank you

@Eng4555

Жыл бұрын

ESP is quite more efficient

@VICKYK-mk1il

11 ай бұрын

mainly we consider the few factors to choose the lifts are production rate crude charaterstics well depth economic viable

Great explanation. Could you do a video about well completion next if its possible?

@KimrayInc

2 жыл бұрын

Thanks for the request! We can definitely add it to our list of content ideas for future projects and always appreciate suggestions!

Hello, thanks for Great Explanation. I just saw in some field that use Step Up Trafo before going to Junction Box for ESP. Why they increasing the voltage? isn't make it over volatge for the motor?

@austriangroyper9308

4 ай бұрын

You only get typically 480volts in but the motor needs between 2,000 to 4,000 volts typically. Thats what the step up transformer is for.

can i run ESP without check valve? i have sandy wells .is it good idea?

@bryceredman7143

6 ай бұрын

No back spin can cause twisted pump shafts if you attempt to restart the ESP shortly after a shutdown

Good video. Normally, what is the height of this pump? How much deep it can go? Also, how does it suit to horizontal drilled wells? Thanks.

@KimrayInc

2 жыл бұрын

An ESP can work well in deep horizontal wells. The number of pump stages, as well as the motor size/power will determine the exact depth that it can operate at and still deliver the desired wellhead pressure.

@cck1496

2 жыл бұрын

@@KimrayInc Thanks for your prompt reply.

@bryceredman7143

6 ай бұрын

I worked for a major ESP service company for 5 years we ran them as deep as 10-12,000 feet on really deep well the deeper you go the more feet of head you are required to lift so more stages

need traduction in french too please ☺, little subtitles

Hi is it cost effective to reuse the ESP on another well after the first well dry?

@KimrayInc

3 ай бұрын

Sorry, you'd need to refer to the manufacturer to answer that question. We're not properly able to speak to that exactly!

Which lubricant do we use here? Hydraulic 32?

@KimrayInc

4 ай бұрын

Hi, thanks for the question, but we would have to refer you to a plunger lift system manufacture to answer that question. Flowco would be a great go-to for those questions.

How reliable are usually these pump!

@austriangroyper9308

4 ай бұрын

Depends a lot on well conditions. Sometimes they can run for 5-10 years, but a lot of time it is only around 1or 2 years.

Hello sir, can the sumersible pump install horizontal?

@KimrayInc

2 ай бұрын

ESPs can be used in both vertical and horizontal wells.

@charloskarlos6797

2 ай бұрын

@@KimrayInc noted, thanks a lot sir

I would like to communicate with you guys, I prefer F2F meeting.

@KimrayInc

11 ай бұрын

Excellent! Please contact either our US or International Customer Service and we can connect you with your closest, most relevant contact for what you need to talk about. US Customer Service: (405) 525-4298 or service@kimray.com International Customer Service: intlservice@kimray.com; kimray.com/international

this piece of cable on the ground is ugly

Ergo. Minds get helped again. With telekko isis