So I just seen this title and CAN NOT wait to watch it! I’m at work so it will have to wait, but I assure you I will be so happy to see this when I get home! 😂

And your channel has grown and gotten quite bigger in last few years. I subbed years ago when I got my v1 granite and had won your first giveaway. Lol. Good job on the improvements as well. The quality has improved for sure. 👌

@RazorRC

Жыл бұрын

Thanks and good to hear from you again! You are the winner of the only giveaway on the channel! 🙂

I have a MT410 still to build but loving my Arrma and Team Corally so much I've just forgotten about it! Was planning to take the electrics out of my Typhon 3s or even my Jambo 6s and fit it to the build.......eventually, one year lol Great video 🇬🇧🇬🇧

Thanks for the video. I bought the MT410 a few months back and am still gathering parts for it before I start the build. I have an SCT410.3 which is just awesome and I really enjoy running it. Now the Outcast is out and I'm thinking maybe I should have waited on the MT410. But what is done is done and I am still looking forward to the Tekno build and some stunt truck fun.

@jeffsilva3648

Жыл бұрын

Tekno is far superior

Great video man

Fantastic comparison 👏

Nice video mate great info. I think the arrma outcast 4s is my best truck more power bud

I own both, and the Tekno is in it's own league!! I've beat the snot out of both, and though I broke both, the Teknos breakage has cost me far less! Love both when the right electronics are installed, and if you're not into building a kit the Outcast is your truck!

@tonytravers5122

Жыл бұрын

I have a TEKNO mt410 box stock it is not a heavy basher ..medium at best I'm talking sending it and bashing hard I bent stock chassis both shock towers plastic shock caps blew top and bottom etc however after putting on M2C chassis 9mm shock towers with arrma body posts ......rear brace centre brace top plate brace and the M2C driveshafts as the TEKNO ones are noodles ..I also added TEKNO aluminium shock caps top and bottom the delrin pistons orange shock springs aluminium centre diff mount ...steel spur aluminium diff cases .....then you have a basher the stock mt410 is a lightweight great handling small monster truck ...add all the goodies which cost a bomb you got a bulletproof truck within reason

@idjc2621

Жыл бұрын

@@tonytravers5122 Thank You for this. I don’t own either, and you hear soo much good about Tekno. I appreciate your honesty. Helps with making informed decisions. I knew it would be a great handling rig, but questioned the Stock Bashability👍🏾

@zaik04

Жыл бұрын

​@@tonytravers5122 sounds expensive af. I wanted one so bad. But after all that I think I'm going notorious. Or another route people say the 6s arrma line is a pita to work on.

@tonytravers5122

Жыл бұрын

@@idjc2621 I love tekno and their build quality is second to none but just want to inform people the truth of your going to HEAVY bash this truck ...m2c is the way to go with heavy bashing .....if your going around a track and light bashing the stock will hold up ok ...I've rebuilt this truck from scratch with m2c parts it's expensive and to be honest would I do it again ? Answer is NO .....I've just bought a arrma typhon rolling chassis ....added M2c parts in the right areas and going to truggify it .....more fun more handling and more speed

@tonytravers5122

Жыл бұрын

@@zaik04 mate I've gone the arrma route cheaper ......I cannot fault the tekno quality for racing but bashing hardcore nope m2c is the way to go ....I'm in the process of truggify a Typhon 6s with m2c parts in the right areas still cheaper than a tekno

I would like to see an updated video comparing the new versions of these trucks. Thanks!

Yes! Great video. Love the honesty. I have the mt410 and it’s amazing no doubt. You are correct about the tune ability differences. I knew I wanted a Tekno when I first saw it, but as for the new v2 Arrma, I honestly just want to test drive it. I still just don’t feel the urge to own it. 🤷🏻‍♂️ Thanks again for taking the time and making this!

Thanks for thee comparison. I so want a kraton. I have built and upgraded my Granite pretty much to where I am happy. So 4s with many extras and just want something bigger. I am torn between the kreqton 4s and 6s. I am also considering the kraton 6s EXB since I would likely not leave the 6s stock anyways. Lol

@RazorRC

Жыл бұрын

I’d go with the 6S, your granite is already pretty similar to the Kraton 4S.

Thanks for another great comparison.👏I was wondering if you attribute some of your MT410s durability(especially when you launch it high) to keeping the stock plastic chassis bracing and having some flex that is absent when full aluminum aftermarket center bracing is used. I'm trying to make mine more resilient to bad landings and was wondering what your experience has taught you about flex vs bracing.

@RazorRC

Жыл бұрын

I think weight has a bigger impact (no pun intended) than flex. I’d keep all plastic parts unless they break before considering buying aluminum replacements.

I recently just purchased an Arrma Outcast 4S BLX knowing about the chassis issue and the plan is to out of the box swapping an aftermarket or upgraded factory Arrma chassis. So my question is, do you have any suggestions to which chassis to swap to. I thank you in advance and value your opinion.

In Australia I'm still waiting for the Arrma Outcast, i don't think we can get much tekno stuff

Yes the tekno is worth the price. I have both, The tekno just seems to drive better. I also always break stuff on my arrma and rarely break stuff on my tekno during the same bash

oh hai! will this comparison get a redux with the v2.5.9.3.45.3.235 ARRMA Outcast 4S And MT410 2.0? happy holidays!

Will the outcast body fit on the tekno?

Got a v1 outcast 4s very durable never broken a chassis maybe just a v2 thing idk but its had ither nightmares diff after diff and all linda slipper issues till they made that piece to spot them from loosening up now with the new diffs its good no issues my notorious v4 6s has been crazy tough besides diffs shimmed still does it just weak pot metal arrmas diffs suck and are quite expensive for such junk mt410 is my new order hopefully the diffs will be stronger

Other than the m2c chassis brace does the new 4s need any other upgrades? Are the v2 shocks good enough or does it need 6s shocks?

@RazorRC

Жыл бұрын

just the brace, rest of the truck is solid

@williamperri3437

Жыл бұрын

@@RazorRC solid! I knew the shocks were way better than the horrible 3s/4s v1 shocks but weren’t sure if they were good enough. Good to know!

Nice one Razor, thanks! One thing though... All in $720 for MT410 RTR seems bit low to me, I think $800-900 is more realistic unless buying 2nd hand (used) parts...

@philthyco1

Жыл бұрын

The mt410 kit is only $369

So what diff oil would you recommend for the Outcast 4S's centre diff? Oh, wait...

@codenamethecleaner7519

Жыл бұрын

Build your own Rc company and you can do you want. Oh, wait…

When I built my tekno I used a old set of of ofna monster rims and a old set of imexx jumbo chevrons

@philthyco1

Жыл бұрын

IMEX makes the best tires people have forgotten

Tekno all day.

Chassis and shock towers are from an eb48. The sct towers are smaller. Chassis is pretty much the same

All I will need is a body and a motor and esc I'm going to Rob the tires and servo out my granite I already have a gt5 and a rx so I'm hoping to get in the tekno for 550 . I actually already have a hobbywing xerun xr8 esc so that save me 150.

Wanted to build a teckno rc MT 410 and build it with all m2c racing parts but I would of have to take out a loan to do so. Rediclous amount of money to build. I settled for the outcast v2 . Love the truck haven't broke a chassis yet and I bash hard. The one thing l cannot stand about Arma trucks is the plastic junk ball ends they put on their trucks they are sloppy in no time. I always swap them out to Traxxas toe links. I used Traxxas e Revo 2.0 toe links on my outcast of course spacers are needed you need to cut down the turnbuckle a little bit on the ends so the Traxxas toe links don't bottom out but Traxxas toe links are super durable. Arma toe links have slop in them after one bash session for me total junk.

@stokedGSXR

11 ай бұрын

Bad decision you made! The mt410 doesn't need M2C parts at all. I have multiple mt410s and one is stock the other is M2C. Honestly, the M2C looks awesome with the bling, but it's heavy af, and the stock one apples to apples destroys the upgraded one. I find the less mass the truck has the better it performs for bashing...the shocks just function better with less weight on them. The lifetime warranty on parts if you do manage to break something on the tekno also makes cost of ownership much less than the arrma. Speaking of shocks, they are 8 scale shocks from their eb48 line, which are massive on a small 10 scale MT. (I consider it small in comparison to my outcast 8s and hpi Baja)

@Schmidt3850

11 ай бұрын

@@stokedGSXR Really don't care what you think to be honest. All of my trucks are fully equipped with m2c racing parts. Why? Because I am a hardcore basher. My trucks look like dots in the sky when I jump them . I bent that skimpy teckno 410 chassis into a pretzel in a day. Been beating the hell out of the m2c wide body game changer chassis for months and it is straight as an arrow. You justifying an OEM truck says your nothing but a mild basher. I am on a level that requires 7075 tough. I bash like Rich duperbash. Take a look at his trucks they are all fully equipped with m2c racing parts. Then take a look at the jumps he does. See how long your OEM truck lasts doing jumps like he does. If you think m2c racing parts are nothing but bling. Then you are nothing but an amateur in this hobby. They make the toughest and best after market parts money can buy.

Hard to say the teckno is only $720+ as assembly of the rc cost arrma has the labor in the cost but I feel the bigger issue is most can’t assemble a kit I like the tekno mine been great 👍 but the Rtr outcast brings the 4s line to market for everyone 👍just my thoughts 👍👍

@philthyco1

Жыл бұрын

The kit is $369 ..$350 more to complete it sounds about right

@earlmoorhead5555

Жыл бұрын

@@philthyco1 how much is your time worth to build it ?

@Fpsnut

Жыл бұрын

@@earlmoorhead5555 My local hobby store charges $40/h for labor. I would guess it takes around 2 hours to build this? I don't solder so it would cost me at least another $100 for them to build it. At $820+ we're approaching the cost of 5th scale RTR vehicles.

@philthyco1

Жыл бұрын

@@earlmoorhead5555 Building is FUN bud! One of the best parts of the hobby

@philthyco1

Жыл бұрын

@@Fpsnut Learn how to build and solder lol..Big part of the hobby my friend..Very rewarding as well

Tekno is epic if you like tinkering with em. Arma if you just like sending it.

Cheap simple solution re the chassis on the Outcast / Kraton for around $30-40 is to fit a bash bar, thats what I will be doing to my Kraton 4s v2.

Tekno mt410 🙌

pffth. i WISH Spektrum hardware was just rebranded ARRMA. that isn't the case, however.

You can read my thoughts... to compare these cars

✌

That’s outcast exb money for the tekno my man haha.

Come on man the Arrma is a toy compared to the MT410..Put it against the Sketer

@philthyco1

Жыл бұрын

Having a chassis that breaks all the time is almost upsetting the tekno? lol.. having a bad chassis is the biggest deal breaker there could be..the chassis is the most important component on RC vehicle

@rcaddictgarage

Жыл бұрын

Were you been at PhilthyCo???

@philthyco1

Жыл бұрын

@@rcaddictgarage Yooooo ive been busy remodeling my house..No videos for awhile ..How you been bro?

@rcaddictgarage

Жыл бұрын

@@philthyco1 Oh yeah thats cool remodeling the house is not easy, but its worth it once its done. Yeah ive been slacking on my vidz the last couple weeks myself.

@dennyweststeijn7155

Жыл бұрын

Toy????

Clicked on this to watch the outcast get destroyed