Visit M2C Racing for tons of Killer 7075 T6 upgrade options. Use the "m2ccoupon" code for some savings. 🍻

@DJayFreeDoo

4 жыл бұрын

Looks like you lose half the speed on that ramp. a bit too steep considering its length perhaps?

@richduperbash2966

4 жыл бұрын

@@DJayFreeDoo it's a mellow transition but about 6" taller than ideal 🤔. It needs another top sheet and more surface screws, just ran out of time to get out and test it before the sun would start getting low. 🍻😎💪👊👊

@Crewchief227

4 жыл бұрын

Figures as today Mitch sent the Shipped email.

@JSTIVISON64

3 жыл бұрын

How do I find the m2c rear shock tower/bulk head brace man where I don't gotta use round center brace on my EXB RICH CAN U SEND ME A LINK BRO??

Another good dose of RC bashing. 😊 😎 👍 I keep my eyes wide open every time I watch your videos. 😎 I like this. 👍 Hi my friend and thank you very much. 👍 Yvan 😊

@richduperbash2966

4 жыл бұрын

Thanks so much Yvan 😊!!!! Always appreciate your comments Brother. Happy bashing 🍻👍👍😎💪👊👊

@yvandesgagne4967

4 жыл бұрын

@@richduperbash2966 You are the PRO of jumps and whatever the truck you drive. 👍 Yvan 😊

You are the Best when it comes to this r/c hobby! Keep'em fly bro!!

@richduperbash2966

4 жыл бұрын

Thanks so much Jay 🤗!!!! Happy bashing Brother. 🍻🤘🤘😎💪👊👊

Kick azz run with the Kraton you have that thing dialed in crazy well. Yeah the body looks rough. Sweet rip!! 👊🏻👊🏻👍👍 Bash on 😎😎

@richduperbash2966

4 жыл бұрын

Thanks so much Brother 😜!!!! This Kraton is feeling dialed 👌. The M2C shock caps/Delrin piston upgrade completely changed the handling and forgiveness 👀. Notice how planted it was off the bigger ramp hits 🙀. Normally there'd be a big slap and bounce. The testing and upgrades have really payed off. 🤘🤘😎💪👊👊

Im building a super kraton with my v4 and im following all your tips on upgrades and learned alot about my talion and kraton just watching your videos thanks your the arrma king

@richduperbash2966

4 жыл бұрын

Thanks so much Eric 😜!!!! Building a super Kraton is a worthwhile venture that definitely pays off 👍. We're super fortunate to have these upgrade options 🤗. Big thanks to all the aftermarket suppliers. 🍻🤘🤘😎💪👊👊

Love that yellow body awesome send my brother

@richduperbash2966

4 жыл бұрын

Thanks Brother 😊!!!! This body is one of my favorites 😍. Happy bashing. 🍻🤘🤘😎💪👊👊

@TruSwagTv2

4 жыл бұрын

@@richduperbash2966 your welcome big bro tru one of a kind happy bashing 🤘🏾💪🏾👊🏾✊🏾🤝💯💥🤜🏾🤛🏾

Damn Rich, hucking those arrmas

Great video Rich!!!! 😎🤟 Love that black & yellow body!!! With all those upgrades and your dedication that Kraton has become a real piece of art!!! 😍👏

@richduperbash2966

4 жыл бұрын

Thanks so much Brother 😜!!!! The black and yellow makes visibility so easy for me while bashing 👀. Really is easy to track even at max distances. The V4 has definitely taken on a new life in it's current form 😍👌👌😎💪👊👊

Nice orbital ramp 🛸

Another killer bash Rich. More M2C killer upgrade parts. Love your test out bashing vids Bro. No holds bar and full on blast launch. Getting a pair of those braces to try out soon. Killer Sends off that monster ramps!! Definitely getting tons of elevation straight to the sun🌞 LOL 😂. How are the LP backflip tires on the Kraton rich? I'm thinking of mounting them for my next Kraton bash. Awesome bash as always Rich. Bash Bro

@richduperbash2966

4 жыл бұрын

Thanks so much Chris 😜!!!! This ramp should work better with another top sheet and more screws 🤔. Did the same with my smaller ramp and it made a Huge difference. The LPs have worked Killer on the Kraton 😱. That's all I've really been running the last several bashes. 🍻👍👍😎💪👊👊

Awesome bash Rich! This video was completely satisfying, thank you for the upload. Your Kraton V4 looks sick as hell, love the detailed explanations man and that yellow is poppin ever so beautiful! I'm sure many bashers will appreciate this video to the core, not just for the bashing but for the great upgrade information as well! Have an awesome weekend brother! Much love always!...those mid catch slow motion jumpshots tho....DAAAYM GINA HAHAHA!!! Straight flossin! LEGIT!!! #RCFAM4LIFE. PS. Great work on the jump you made too....BEST RC video made on YT this weekend HANDS DOWN! ❤✊🍻☝😎💯🔥🔥💪

@richduperbash2966

4 жыл бұрын

Thanks so much Tom 😊!!!! You always leave the best comments Brother 👊. Mitch is absolutely Killin it with his AWESOME upgrades 😱. No bling about it. All his parts are made for a purpose and do exactly as designed. Such a pleasure to test and suggest with this stuff. The ramp is a tad big 👀 but it's good for high speed sends. Just worked the past 4 days, hope you had a great weekend Bro. Bash on!!! 🍻🤘🤘😎💪👊👊

Killer video dear brother, sometimes flying less is fun to 😊. That ramp 👀, i need to build one before summers end here. Shock caps with pistons seems to work out VERY good ❤❤❤❤❤❤

@richduperbash2966

4 жыл бұрын

Thanks so much dear Brother 😍!!!! I'm looking forward to using the leftover wood cuts to make a smaller speed ramp 😱😱😜. This one is kinda big 👀 but it's easy to hit too 👍. I honestly like smaller ramps that have more instant kick, but this one will definitely get used 😍. Can't wait to see what you build my friend 🤗. It's fun putting them together 🍻🤘🤘😎💪👊👊

@TpPartsRcXtreme

4 жыл бұрын

@@richduperbash2966 dear brother, first teet in 11h ❤

Wow rich the development is insane and much thanks to your devotion so we get quality for the 💰!!!

@richduperbash2966

4 жыл бұрын

Thanks so much Matt😊!!!! This V4 is feeling solid for sure 💪. I really enjoy helping test and develop these parts 🤗. Mitch is Killin it with these designs. 🍻👍👍😎💪👊👊

Great info brother..Always good to learn from you..Delrin is good stuff..I just put some delrin 3 valve pistons in the cheap ebay big bore's for my Red Senton..Super smooth now.

@richduperbash2966

4 жыл бұрын

Thanks so much Brother 👊!!!! Awesome to hear about your shocks 👍. It's incredible the difference material makes in reducing friction and resistance. These inserts glide on the pillow balls 👀. Mitch swears they get even smoother with time. 👍👍😎💪👊👊

@philthyco1

4 жыл бұрын

@@richduperbash2966 The eBay big bore shocks were surprisingly bladder less and billet aluminum for $35-$40 but I had to drill out the upper eyelet in order to fit the Arrma pivot balls and the stock one valve pistons were no bueno..The valve was drilled to close to the shaft hole so the E clips would cover the valve..Easy fix with new pistons..Headed out hopefully tomorrow to try them out

AWESOME vid my good friend!😎👊Finally back in town here and back to the grind! An amazing bash at the urban site bro! The Kraton took a beating and kept on ticking! The upgrade wizard Mitch is just plain KILLIN it!! I adore the pillow ball nuts! I plan on getting a set for all the 6s'ers! Sucks on that hub break! That was a brutal hit!😳The ramp is looking sweet man! Pretty aggressive angle too!😱 Definitely moon shots her! Pretty stoked about Thomas P's ramp build! Can't wait to see what he does with it! Hate to see the ole Yellar bod go! My V4 Bod is done! I ended up fitting the V3 Bod I reinforced to go through a World War!😂Amazing vid once again brother Rich!! Peace!😎💪💪🤘👊👊🍻

@richduperbash2966

4 жыл бұрын

Thanks so much Brother Eric 😜!!!! Hope your trip went smooth 👊. Felt great to hit the urban spot up again 😍. Those concrete chunks are just plain NASTY 😱😱💩. I knew instantly I was screwed 👀. Should've zoomed in on the chunk cuz it was black from my A arm, hub, and tire maybe 🙀🤣🤣. I've moved some pieces, but others are buried treasures stuck in the ground. I definitely want to fit up all my 6s rigs with the pillow ball caps 👌. What a breakthrough. Ole Yellow may have some life left 🤗. I'm quite attached to her😋. The ramp felt good overall but is a bit steep 👀. It'll work good at the gravel pit for gaps and transfers. Can't wait to see Thomas totally send it 🚀🚀. His looks friggin gnarly 🤪. Appreciate the kind words Brother 👊!!!! 🍻🤘🤘😎💪👊👊

Love seeing these Arrmas get thrashed. And that they just keep going on for flight after flight. 👍👍

Nice bash Rich.

@richduperbash2966

4 жыл бұрын

Thanks so much Brother 👊!!!! Happy bashing 🍻😎💪👊👊

I remember when I was watching your vids thinking about getting a Arrma kraton. Good thing I didn't seems like they break to much. I went with Revo 2.0 instead! Soo much stronger only weak points on the Revo is the Rod ends . The self righting works like a charm also.

@richduperbash2966

4 жыл бұрын

I'd buy a Revo too if I found it at all appealing. Every friend I know that got one ended up sold 👀. Different strokes for different folks I guess. 😎💪👊👊

@DeRock401

2 жыл бұрын

Lol this is funny because the e revo is probably the most fragile rc I ever owned whereas my kraton exb hardly ever has any issues

Always a pleasure bro. 👊😀 Love the yellow.

Man u built a beast of a ramp, I bet she's heavy, another awesome bash session broski

@richduperbash2966

4 жыл бұрын

Thanks so much Stevo 🤗!!!! The ramp isn't that heavy, just bulky to load and carry 😋. I used 2"x 3" studs and lighter 3/8" plywood. 🍻👍👍😎💪👊👊

Gnarly bashing! Sick ramp! Love the upgrades for sure! Always awesome bro!

Mega gut Rich👌😁👍

I'm amazed at what you don't break. Fantastic skills!

@richduperbash2966

4 жыл бұрын

Thanks so much Robert😉!!!! I'm still amazed by what these rigs can handle with the right upgrades. Much appreciated. 🍻👍👍😎💪👊👊

Nice work building a ramp based on maximum size that fits in your van! Great bash as always sir! Thanks for the tape tip too, brilliant!

@richduperbash2966

4 жыл бұрын

Thanks so much Rich 😊!!!! The ramp is almost too big but I can load and move it safely 👌. It does need another top sheet to hit at higher speeds and going to add swivel casters to push around easily. Happy bashing Brother!!!! 🍻👍👍😎💪👊👊

Rad video Rich! Great tip with the electrical tape. I popped a ball out 5 min after I bought my truck and did the same thing. Only way I could thread it back in. Epic air!!!!

Way 2 go Rich! Nice repair & go homey! luv the yellow! kinda looks like a lt450r stay lifted!

@richduperbash2966

4 жыл бұрын

Thanks Brother 👊!!!! I don't sweat breakages one bit 👍. Just fix it and keep going till my Lipo is done 🤗. The yellow is one of my favorites. Easy to see and reminds me of fast sports cars, quads, you name it. 🍻👍👍😎💪👊👊

That’s freaking sick brother. Definitely some fun right their. Another awesome video 👊👊😀😀👍👍

@richduperbash2966

4 жыл бұрын

Thanks so much Kenny 😊!!!! The Kraton is such a dependable Beast with these upgrades 👀. Much appreciated Brother 🍻🤘🤘😎💪👊👊

Hey Rich, love all your vids. Your driving skills are crazy good, I’ve been in RC for 25 years and still nowhere as good as you. Love that Angie D joins you sometimes, how did you get her interested, I have 2 daughters and can’t get them into it.

@richduperbash2966

4 жыл бұрын

Thanks so much Mark 🤗!!!! I first bought Angie an ECX Ruckus which we worked on and upgraded together 😍. I built a smaller ramp and let her go at it with some basic coaching of course. Her interest has always been moderate, but I just try to keep in Fun 😜. Changing locations has helped and letting her try 4 and 6s. She's currently on a dry spell 😱 but her interests are quite numerous as well. 🍻👍👍😎💪👊👊

@markhalton2584

4 жыл бұрын

Rich Duperbash thanks for taking the time to reply Rich. I’m going to try getting my girls to help me work on my rigs, maybe that will spark their interest. Thanks for the idea. Keep up the great work mate 👍👍🙏🙏

Great bash as always man! Keep it up!

Thanks for the ramp information brother ! I can’t say enough good things about you and the other guys in the RC bashing community that are so willing to help the new guy 👊🏻

I will definitely be starting my search for a decent Arrma slider so I can put my own goodies on it. Your videos have inspired me. 😂 great video.

@richduperbash2966

4 жыл бұрын

Thanks so much my friend 👊!!!! Getting a slider is a great idea especially if upgrading anyways. 🍻😎💪👊👊

Awesome job. Perfect video to watch before bed

Awesome vid rich!! I have my kraton v4 roller torn down and waiting for mitch to ship my chassis i ordered friday. Hope my kraton is as awesome as yours one day.

@richduperbash2966

4 жыл бұрын

Thanks so much Brother 😜!!!! Congrats on the Goliath Series chassis 😱. Probably the single best upgrade available 💪. It's a serious gamechanger no doubt. 🍻👌👌😎💪👊👊

Did you paint the body yourself? Very nice 👌

That ramp is perfect Rich ! are there specs available on how to build it ? materials etc. , thanks for your time .

@richduperbash2966

4 жыл бұрын

Thanks Brother 👊!!!! I sized it specifically to fit in my van using 3/8" plywood sides (templates), 3/16" tempered hardboard surface, and 2"x 3" studs for the cross members spaced 8" apart up the transition. It's 30" tall, 40" wide", and 60" long (+3 inches of top sheet over run at the base). I don't use blue prints or plans, just know how to make them from experience. This is a good reference to go by. Skating construction uses the same principals just with beefier material. You don't want too steep of a curve 👀. Beyond 45° is overkill. 2 feet high is actually about perfect IMO. www.diyskate.com/

Hey Rich, I love how you showcase the M2C stuff on your channel. I now have a lot of M2C stuff on my rigs and it’s top quality and good upgrades that really do improve the rig. Can you talk Mitch into making a hardened pinion and ring gear for the diffs. On 6s, I see these wear/fail much more quickly than I like, especially with the upgrades adding a little bit of wait. TONS of baskets would buy it I have no doubt!

@richduperbash2966

4 жыл бұрын

Thanks so much Peter👊!!!! Think I've brought this up with Mitch before 🤔 but I'll check again. Definitely would be an awesome upgrade option. 🍻😎💪👊👊

Sweet i was lookin forward to a video from someone been waiting here lol the Kraton is lookin bad ass. Rite now my V4 is completely stock im thinking of doing everything M2C carries for it wondering if he's gonna make shock towers that would be awesome great video as always my friend happy bashing bud👍👍🤙😎🤪😜😝🙈🙉🙊👊✌

@richduperbash2966

4 жыл бұрын

Thanks so much Chris 😜!!!! Loved your new Talion V3 upload 😍. 7 months is too long to leave her on the shelf though 😱. Hopefully have mine out again soon. Mitch is Killin it with the new upgrades Brother 💪. Let you be the first to hear that towers are in the works 😱. He's in the draft and design stage. Voltage is Killer no doubt, but the more available options the better as I see it. Happy bashing Brother 🍻🤘🤘😎💪👊👊

One of my favorite bashes with some parts breakdown. A little of everything That ramp...is it more than 45 degrees? Looks pretty steep. I’m gonna build one similar and I’m rocking the minivan also so I gotta fit it. I’m thinking for me no more than 26 inches tall based on your size. You build that out of one sheet?

Haha sick ramp brother i can only imagine the truck being so high in person. Excellent control of le throttle.. Sweet bash brother.

@richduperbash2966

4 жыл бұрын

Thanks so much Brother 😊!!!! This ramp does have some good vertical 😱. The upgrades are coming together nicely 👌. Much appreciated. 🍻👍👍😎💪👊👊

Sweet bash bro,,I was going to build a ramp too..the pillowball caps seembadass..🤙🤙👊

@richduperbash2966

4 жыл бұрын

Thanks so much Brother 👊!!!! I'd been wanting to build a new ramp for over a year. Just kept putting it off. The pillow ball caps are friggin Sweet 👀. This is the ultimate solution I think. They completely lock down on the hub and are silky smooth 👌👌😎💪👊👊

Nice!

Great bash as always brother 😎. can you send me the link for them m2c pillow ball nuts please .

@richduperbash2966

4 жыл бұрын

Thanks Brother 👊!!!! I'm not sure they're released just yet 🤔. I'll update with a pinned comment and link ASAP. 🍻👍👍😎💪👊👊

@AdrenalineAshRC

4 жыл бұрын

Rich Duperbash really appreciate the help bro. ☺️

I just laugh and shake my head. Love your work !!

@richduperbash2966

4 жыл бұрын

Thanks Brother 😜!!!! Love bashing these rigs🤗. Such a good outlet. 🍻😎💪👊👊

Sic bash 💪👌 Love bash spots like that 👍

@richduperbash2966

4 жыл бұрын

Thanks so much Trent 🤗!!!! I love open raw spots like this too 😍. Just have to watch for boulders and broken concrete chunks 👀👍👍😎💪👊👊

Your videos just keep getting better love it an the new upgrades. P.s be awesome to see you an Rc dude81 bash together 🤘🤘🤘

@richduperbash2966

4 жыл бұрын

Thanks so much Dean🤗!!!! The new upgrades are the real deal 👀. I'd love to bash with Eric 😜 but we're on opposite sides of the country 😱🤘🤘😎💪👊👊

I need those pillow ball nuts asap! I cant for the life of me thread them in straight! Love the kraton v4 so far! Cant wait until mines all goliathed up

@richduperbash2966

4 жыл бұрын

I put the link to the nuts in my pinned comment 😱. Just hit the website. These thread WAY easier and completely lock down allowing you to set them Perfectly and just bash 😍. Mitch truly knows his stuff. 🍻😎💪👊👊

Nice ramp rich , how did you come up with measurements, i wanted ask carpenter at work build me one or even do myself i dint know where to start lol we need that nice angle up towards the face like a quarter pipe and not 45 degree straight ramp right idk

@richduperbash2966

4 жыл бұрын

Thanks Brother 👊!!!! I measured my van carefully first 👀. Portability is very important. This ramp is almost too big to be honest, but it's easy to hit too. Drawing the radius.....ie curve or "transition" is the trickiest part. I traced this one from my halfpipe I built 6 years ago in my backyard. I recommend going to DIY skate ramps for building ideas. You don't need the beefiest materials for RC, but construction principles are the same. Don't go too steep 😱. Anything past 45° will be harsh. Forward momentum is key to a nice ramp IMO. 😎💪👊👊 www.diyskate.com/

@rcplayer7581

4 жыл бұрын

@@richduperbash2966 🙏👊thanku

Whats the secret to the skid flip lol it was pretty bad ass .love the ramp serious air. Im trting to figure out a ramp i can fit into a car.something i can make that folds up maybe bolt together quick.i always wanna bash and wrench my cars after your videos man. Thats a great tip with the electrical tap on the alan wrench.definitly genius for keeping straight.thanks rich 💪💪💪🏋🏋🏋

Rich , do you recommend the use of lock-tite on the little screw that holds the pinion gear in place ? i have some robinson racing pinions on order for my 6s v4’s . Thanks for your time brother ! i believe you call it the grub screw ....

@richduperbash2966

4 жыл бұрын

Most definitely want to use a quality thread locker on all grub screws 👊. I've had my best luck with Loctite 242 blue medium locker. Just remember to clean the grub and pinion threads with isopropyl alcohol or other agent to remove manufacturing oils first. Many don't, but that's the trick for a solid bond. 🍻😎💪👊👊

@Twentyfoursilver

4 жыл бұрын

Thanks Rich !!!!👊🏻

Awesome as always!!! I was literally just thinking about making a ramp then saw this! Maybe 1/10 scale sized, compared to that rc killer u made tho lol

@richduperbash2966

4 жыл бұрын

Thanks Brother 😊!!!! 18-24" tall is plenty with a good transition 👌. This ramp was built with the gravel pit in mind 👀. Hoping to set it with a natural downramp in mind. 🤘🤘😎💪👊👊

Awesome brother. Do you think that hub broke super easy due to the pillow ball nuts being tighter stressing/stretching the threaded area?

@richduperbash2966

4 жыл бұрын

Thanks Brother 👊!!!! It broke cuz I absolutely tagged a jagged edge of broken concrete block jetting out of the ground 👀. It didn't look as bad as it really was. The sound was Nasty in person too. It took a chunk out of my RPM A arm too. This pillow ball setup is a keeper 100%. 👌👌😎💪👊👊

@slicktmi

4 жыл бұрын

@@richduperbash2966 awesome bro yeah it was a nasty hit bash on brother

Sup rich...i have another question for you if that alright 😄 have you ever ran the hexfly 6, 6s version? I know you run the 8s version sometimes but I was wondering if i should get the hex6 over the max8 being that its 160 amp as opposed to 150 amp max 8. ill be paring the esc with a 1730 kv motor...As always,, I really appreciate your input. Thanx bro🙂🤙

@richduperbash Do you think your hub cracking had anything to do with the outward pressure the m2c nuts are exerting on the hub?🤔

@richduperbash2966

4 жыл бұрын

No I don't 👍. It was a freak direct hit with a jagged chunk of busted concrete 😱. Much nastier than it appeared on camera 👀. Just glad it didn't rip my tire too. The impact also punched a chunk out of my RPM A arm. Landing anywhere near that area is sorta asking for trouble. 🍻😎💪👊👊

hey there rich, what are the dimensions of your new ramp?

@richduperbash2966

3 жыл бұрын

I've been using this one for about a year. It's 30" tall, 40" wide, and 60" long. 😎💪👊👊

Nice raw bashing my friend 👍👌 Your right those new M2C goddies are sweet 😍 I have a video to upload soon as well. Really like your new ramp!! Gotta make it portable and big 💪 Gives you some nice lift off 🚀🤯

@richduperbash2966

4 жыл бұрын

Thanks so much Aaron 😜!!!! These new parts are Epic 😱. The achievable tension with these new pillow ball retainers is so precise 👌. No more unwanted slop and crappy steering from the nuts backing out mid run 😍. The Delrin is silky smooth too. Almost couldn't fit the ramp in the van 👀. Like they always say, measure twice and cut once 🤣🤣. Can't wait to see your upload Brother!!!! 👍👍😎💪👊👊

Do you have a ramp build video? Would love one

@richduperbash2966

4 жыл бұрын

Hey Bryce 👍. I might do one using leftover pieces from this ramp build 👀. Really enjoy wood working anyways. Just have to find the time. Things are hectic at the moment. 😎💪👊👊

@powerwam024

4 жыл бұрын

@@richduperbash2966 hell yea ive been saving leftover wood from work. just need to know the best way to build a kicker

@richduperbash2966

4 жыл бұрын

@@powerwam024 you don't want it overly steep 👀. Straight down landings get harsh. I'd say 45° max really. Here's a link you may find helpful. I use the same principles from my skating days just with lighter materials. Deciding on dimensions and the curve is generally the biggest challenge. Be safe using power tools 👀. diyskate.com/

Rich can you do a vid how to build a ramp

@richduperbash2966

4 жыл бұрын

I've thought quite a bit about it the past 2 years 🤔. Definitely still on my radar. Here's a link that you may find helpful. The principals are all the same. www.diyskate.com/

Does your max 8 overheat or get hot on the kraton? Would it be better with the 4092 or stock motor

Hey bro I have a v4 notorious with m2c outcast 6s 3005 v5 chassis m2c rear. Brace also m2c 9MM shocktower m2c rear shocktower to rear brace. Double brace . Hot racing complete diff cases front and rear. HR front chassis brace. Front m2c 9MM shocktower. Can I take the stock tower to tower brace off.?! Please give me a little help with this . I see that you and Eric rc dude 81 hardly ever run one when you've got it m2ced and HR out

👍🤪Yeah Rich and while we are on the highway that we go to a rc race there is nothing better than watching your video😁 very good m2cracing upgrade, we have to buy them too💪. The yellow body and spectacular compliments👍👍🤘I put the video with the new notorious that I do a bit of extreme bashing at the skatepark😁 if you wish to watch it as soon as you have time, I would be happy to receive your evaluation, good bashing bro🍻🍻🤘👍💪

👍😁

Wow Rich another great video! I’m curious why you like the smaller backflips as a posed to the bigger ones? Is it because it’s easier on the drive train? I’d love to know more of your thoughts on how to choose the right tier wheel combo 🙏🤙🏽

@richduperbash2966

4 жыл бұрын

Thanks so much Mark😊!!!! These smaller Backflips are way faster, handle better, and are far more planted overall 👌. I'm not knocking the bigger originals, just truly love speed bashing and these are far superior for that 👍. They are easier on the drivetrain also. 🍻🤘🤘😎💪👊👊

You may have covered this in another video, I'm sorry if it's a repetitive question. What radio are you using in this truck?

@rcplayer7581

4 жыл бұрын

I can tell you which one him and anyone else knows how drive are not using 😥

@SeventyRS

4 жыл бұрын

@@rcplayer7581 oh yeah? Which one is that?

@Shortsircut1

4 жыл бұрын

@@SeventyRS Haven't you heard, everyone hates the Spektrum radio that comes with it from the factory. I have no problem with mine, but then I don't bash like Rich does either.

@rcplayer7581

4 жыл бұрын

@@SeventyRS the rtr spktrum comes with has delay for me not enjoyable

@SeventyRS

4 жыл бұрын

@@rcplayer7581 I have heard that about the rtr Spektrum being slow. I know that some used to come with the tactic radio so that's why I asked. I just got my Typhon 3s with the Spektrum system and it has been fine for my limited use so far. I did already order another radio that is supposed to have a much better range and response time. It also includes a built in gyro that works like the AVC/TSM feature. I am really curious to see how it does. That can also be shut off if I don't like it. I have AVC and TSM in a couple other models and because I suck as a high speed driver it helps me keep things under control. However I do not have much experience with the serious jumping and air time like Rich does. So I'm looking forward to getting more of that experience with the Typhon. I'll put the stock radio in a crawler where slow is a good thing. Lol. Thanks for the info guys!

Hey Rich! How much difference in gearing would I need to run those smaller backflips? I have the regular backflips on my v4 Kraton. Wonder what size pinion I need to balance out speed wise. I have the regular voltage braces on my Kraton. Those new ones are sweet! That system looks good. And those pillow ball retainers... my first run and even with the o rings, my one kept backing out. I didn't know what to to at the time so there is a drop of super glue in there on the threads. It hasn't moved since. I don't want to keep it that way though. I'm gonna pick those retainers up and I already have spare steering blocks in case the glue messed it up. Great video bro! 😁🤘👊✌

@richduperbash2966

4 жыл бұрын

Thanks so much Cole 👍!!! You could go up 1-2 teeth on the pinion most likely and you'll move much faster 👀. These wheels get the power down much better than the bigger Backflips. Much more planted and responsive. 🍻🤘🤘😎💪👊👊

@colebowman2833

4 жыл бұрын

@@richduperbash2966 Thanks Rich! I worried when I first seen them that they may not hold up against 6s which is all I run in my Kraton as of now. Man though! They must not come unglued if you're using them. That's awesome because they're cheaper than the MT's and I like the look of them a lot. I've wanted something just a tad smaller and these look awesome. Thanks bro! 😁🍻💪👊✌

@richduperbash2966

4 жыл бұрын

@@colebowman2833 you bet Brother 👊. I've yet to have any issues after several Hard bashes 😱. Very impressed. I did vent them of course with sharpened 3/16" brass tubing in a drill just like my other bash wheels. 👍

@colebowman2833

4 жыл бұрын

@@richduperbash2966 Ya. I have all mine vented too. I got the 3/16" brass tubing tip from you I'm pretty sure! I'll be sure to vent them. I'm still on the stock pinion. Running off road of course with kraton. Idk how far I can go up really. I have a 13 and a 15. Maybe I'll need a 14? Idk man! Thanks for everything!👊🤘✌

@richduperbash2966

4 жыл бұрын

@@colebowman2833 with the stock electronics you can do a 16-17T pinion especially with the Backflip LP's no problem👌. Just check temps to get a baseline. 👍👍

where do you find the bladderless? also what kind of batteries you running?

@richduperbash2966

4 жыл бұрын

The bladderless system is on the M2C Racing website 👍. I'll attach the link. I generally run Hobbystar 6s 4800mah 50c 6s hard case single packs. 😎💪👊👊 www.m2cracing.com/product.sc?productId=981&categoryId=123

Hey question for you, I picked up a 20 tooth Robinson racing pinion gear and no matter how hard I try, the mesh is jacked up. It sounds like garbage, and I ended up breaking 4 teeth of my spur gear. Had to pick up a new one. Are there certain types of gears that just don’t fit with the 50 tooth spur gear. I dropped back to my 16 tooth and it meshe’s just fine. Did I pick up in incompatible 20 tooth pinion gear? What size gear do you run for your pinion? And if you wouldn’t mind sharing the exact name/model number that would be great. Thanks 1 million. FYI that ramp is sick as hell!

@richduperbash2966

4 жыл бұрын

Thanks so much Brother 👊. I've since added a second top sheet and extra cross brace and the ramp is sending even better now 🤗. That totally sucks on the pinion 👀. I'm running a Robinson Racing Extra Hard 20T pinion #1220 . My best guess is you got a 0.8 mod by mistake 🤔. Any size mod 1 gear should achieve proper mesh with the stock 50T spur gear. Sorry that happened 😬. Here's a link to my pinion. www.activepowersports.com/robinson-racing-products-extra-hard-steel-5mm-bore-1mod-pinion-20t-1220/?gclid=CjwKCAjwzdLrBRBiEiwAEHrAYqSKtrSDkyJ6qrerXCO0H70CbNE1zc5M1d958k7HTPCxKU2TkP9yYRoCeH0QAvD_BwE

@EastTactics

4 жыл бұрын

Thx Rich! Your right, I ordered the wrong pitch. I’m picking up the right one now. Your a life saver!

Imo I think that u would get more subscribers if u started to do Thumbnails, channel art, and customize ur home page. That's my advice, take it or leave. You will definitely get me to sub

Hay Rich r the backflips lp bigger then 3.8 badlands!?

@richduperbash2966

4 жыл бұрын

Yes indeed 👊. They are just slightly taller and wider and add roughly 50 grams of wheel mass per corner 👌. The foams and tire compound are firmer and there's way less ballooning on 6s power due to the thicker tire carcass and internal ribbing. I find them a better value and overall superior to the Badlands 3.8's. 😎💪👊👊

Hey rich, would you be willing to share the dimensions of the ramp you built?

@richduperbash2966

4 жыл бұрын

You bet Brother 👊. She's 40"' wide, 30" tall, and about 60" long. You honestly don't need more than 24" tall for a Killer launch ramp IMO. The curve is more important. Too steep is usually harsh. Too much up and not enough out. I aim for a decent balance of both. 😎💪👊👊

Nice 😎👍

What is the best (super) cheap 6s Lipo that I can get max run time out of

@richduperbash2966

4 жыл бұрын

That's a tough question Matthew 🤔. I only run hard case Lipos for durability and they often cost slightly more. I'd recommend a 50-100c discharge rated pack for good performance and probably around 6000-6500mAh capacity for longer run times. The 7000-8000mAh packs are extremely heavy 👀. Hobbystar from RCJuice has some sales going on. They're my favorite value/quality brand. 😎💪👊👊

@matthewfojtik994

4 жыл бұрын

Rich Duperbash thank you Mr.duperbash I will try to order one 😎😎👍

@matthewfojtik994

4 жыл бұрын

Rich Duperbash how much run time were you getting out of a 6500 Vs something like a 5000⏱, and is the ant benefit to running 2 3s lipos👍😎😎

@richduperbash2966

4 жыл бұрын

@@matthewfojtik994 I'd say around 30 minutes with the 6500mah and 20-25 with the 5000mah. That depends largely on bashing style, wheels, and terrain of course. I see no advantage to running 2 3s packs in the 6s rigs. It's much simpler to run single packs and usually saves weight. 🍻

@matthewfojtik994

4 жыл бұрын

Rich Duperbash thanks for the help 🙏. I will ask my mom if I can get one😎👍

How do you control it in the air? I'm new and I just got a Kraton 6s

@richduperbash2966

4 жыл бұрын

Honestly it takes some practice. Throttle will bring the nose up midair. Heavy throttle off jumps leads to backflips. Brake will drop the nose and/or help level you off. Try not to ever land on heavy throttle. That's very hard on diff gears and drivetrain parts. Ideally the trucks wheel spin is about equal to it's speed when landing off jumps. Be patient and start small. Best to be progressive with your learning and expect some rough hits here and there 😱👍👍😎💪👊👊

What weight diff fluid are you running if you don't mind me asking? Front,center,rear

@richduperbash2966

4 жыл бұрын

I'm running 50/500/20k front to rear. 🍻🚀🚀😎💪👊👊

Time to upgrade your GoPro rich! A Hero7 with HyperSmooth will definitely fine tune the quality of your videos! I believe gropro might even be announcing a newly updated camera in September as well!

@richduperbash2966

4 жыл бұрын

Thanks Dave 🤗!!!! I think you're right Bro 👍. I'll keep my eyes peeled for the next update and go from there. I'd really like some stabilization.🍻🤘🤘😎💪👊👊

what highest you run your temps up too

@richduperbash2966

4 жыл бұрын

Usually 150-160F motor and 140 ESC. 🍻😎💪👊👊

What bumper are you running in the front?

@richduperbash2966

4 жыл бұрын

I run Tbone Typhon Basher bumpers on all my 6s rigs. They're not the most protective perhaps, but work fine for me 👍. I like that they don't shovel the ground. Depending on which rig you have, may need to purchase the mini Arrma bumper that comes with the Arrma composite ball cup baggie. It locks in your hinge pins up front. 😎💪👊👊

@bigbeartn

4 жыл бұрын

@@richduperbash2966 Ty Sir for quick reply

Hey rich nice air!I just got a v4 and upgraded a lot of things before ever running.i put a monster x 1515 2200kv combo in it.had a 12 tooth supposedly could handle 6s.it didn't make it full batt run before locking up tight.so now I'm putting the stock 2050kv motor back on it(Never even used).somthing tells me its gonna fry too.2050kv in my opinion is a 4s motor.i bought the kraton after watching your vids and have noticed you hobbystar 1730kv.you beat the snot out of it.have you ever locked one up?would you recommend for kraton.im trying to find one I can beat the he'll out of and not worry about frying.do you no of a better one than the hobbystar.your the kraton master so your opinion is in demand.thanks😃

@richduperbash2966

4 жыл бұрын

Thanks Brother 👊!!!! The stock BLX4074 2050kv is actually a very strong motor 👍. I just enjoy the bigger Hobbystar 4092 mostly for the torque gains. It's most helpful with blasting off jump faces. I can't explain why your Castle combo lit up like that, but the 2200kv is probably better suited on the Typhon or another lighter platform. 😎💪👊👊

Love the ramp design. Did you make it that deep (front to rear) to keep it planted? Or was it to prevent tipping? Just curious because I’ve never seen a ramp that deep before.

@richduperbash2966

4 жыл бұрын

Thanks Jon👊!!!! I made it like this to stay planted with high speed hits and to have framing to grab during loading and unloading. 🍻😎💪👊👊

What's the total weight of your kraton without a battery with all your upgrades ?

@richduperbash2966

4 жыл бұрын

I'll need to reweigh it but think around 11+ pounds 🤔. At work now but I'll update you later. 🍻😎💪👊👊 11 pounds 4oz . That's fully dressed minus a lipo. The long can motor adds around 100gm plus ESC a bit too. 🤗

@jcocanour

4 жыл бұрын

@@richduperbash2966 thanks for the reply

Wait, did you say 20T pinion? Hows the temps while running a 20T?

@richduperbash2966

4 жыл бұрын

The temps are around 150F motor and 130-140 ESC running 20T with this 4092 1730kv. 🍻😎💪👊👊

Man you can jump

How much did you have to spend before you even drove it the vary first time? Can't understand why so many people are willing to buy something that is so inadequate. Iv watched so many videos about arrma and everyone all say the same thing you need different Chasse different shock tower's different hing pin braces different Chasse braces different diff gears you must have close to 900 bucks into the thing and it must waigh 3 pounds more than stock

@PLAT515

4 жыл бұрын

Yeah, sounds about right. RC hobby isnt exactly cheap but im still doing it just step by step as something fails on me. All i've done to my kraton v4 is aluminum servo mount, heatsink on motor, 16t pinion, tekno shock rod ends, and 500k center diff fluid. Runs amazing so far but i can tell i need bearing kit now, and maybe the shock tower hinge pins. I am launching this thing full throttle off one of those plastic skateboard ramps. No chassis bends yet, or original plastic center brace breaks yet either. Its an amazing rig, and i can't wait until i put more money in to it. (Like the servo, would really like that, steering is kinda iffy)

@PLAT515

4 жыл бұрын

Another thing to add, is me and my buddy decided to get opposite trucks. Competitors, the Traxxas revo 2.0 and the arrma kraton are pretty close to match. He has already replaced numerous shock rod ends until finally getting aluminum ones, and then the toe rod ends countless aswell sometimes immediately after putting them on, so then was the upgraded toelinks which wasnt cheap and added the center brace and limiter straps. After all that his pillow balls started popping out of the knuckles, easy fix there but then his servos stripped and traxxas replaced the gears under warranty only for them to fry completely the next week. And that is currently where his revo 2.0 stands. In his garage on the shelf until he buys the upgraded 70$ savox 1231sg servo. All im getting at is if you wanna play with big boy toys you end up paying the big boy price. Goes either way, traxxas or arrma. The arrma kraton v4 is my very first arrma and besides some flaws its a great rig and im happy with my choice. Especially how much easier it is to work on. Currently money spent the traxxas revo 2.0 is over the kraton. But im sure ill soar past that shortly

@richduperbash2966

4 жыл бұрын

I tend not to add up costs when upgrading my rigs, just shop wisely 👍. I ran bone stock initially and upgraded and modded as I saw fit. There isn't an RC in existence that will take regular extreme punishment without some upgrades or modification that I'm aware of anyway. The highly touted Tekno MT410 same thing. I'm very weight conscious when adding stuff to my rigs and everything hits the scale. Only upgrade what I've personally busted or twisted up and deam highly beneficial. These rigs are still durable bone stock, just depends on your use and perspective I think. 🍻😎💪👊👊

@richduperbash2966

4 жыл бұрын

@@PLAT515 well said Brother 👊. No one is forced to upgrade anything 👍. This hobby is all about choice and options. People that don't want to spend 💲 should do something else IMO. 😎💪👊👊

SECOND!

Why don't you buy a Russian Unbreakable body for that thing my guy? Seems like your body is the only weak-point left.

@richduperbash2966

4 жыл бұрын

I've definitely thought about it 👀. Part of it is wanting bright colors for visibility at distance and in low light situations. 🍻😎💪👊👊

@brianmahutga3350

4 жыл бұрын

You said the only weak stop left but when new there are 80 present of the 6s arrmas is a weak spot why would anyone want to buy anything just to have to replace so much of it before you can even drive it much less bash it. If you are willing to throw your money away just buy a traxxas and send me the money that you would have had to spend on upgrading an arrma

@daveleonhart837

4 жыл бұрын

@@richduperbash2966 For the Xmaxx they make Blue ones and Silver, hopefully those Russian dudes will come out with more colors.

@richduperbash2966

4 жыл бұрын

@@brianmahutga3350 to answer your earlier question, I'd recommend atleast aluminum chassis supports, servo mount, and a decent front bumper and rear skid plate. 👍