Hi bro, if we soldered pins to analog of l293d should it connected to analogs of the Arduino?

Superb video thanks for my own tesla👍

@MrProjectsoPedia

2 жыл бұрын

I glad you like it 💚💚

Sir, i have a doubt because all the video that i saw they were using l298 driver. But you are using a driver. Is it ok if i use the driver that you have shown in this video?. Please i need this for tomorrow , so i can buy now. Please sir

❤️ awesome my friend, ai also love these Robotics and electronic..❤️❤️

@MrProjectsoPedia

3 жыл бұрын

Thanks bro💙💙 #DoSubscribe!

@PhysicsWallahMotivation

3 жыл бұрын

@@MrProjectsoPedia done, my robotics channel - #smartcreativity

@MrProjectsoPedia

3 жыл бұрын

@@PhysicsWallahMotivation done

Hey dude I was going to buy pieces but on the web page each of the comments say the motor doesn't spin and that the code doesn't work, so could you check what might be wrong?

Very nice project Sir if you can please tell what type of jumper wires you have used in this project it would be nice

@MrProjectsoPedia

2 жыл бұрын

Thank you! Its a normal jumper wire. You can easily find it online.

I have made this but I'm my model the bo motor with wheels are not working even I have connect the wires to motor driver

Is there a way I can contact you bro? Just to discuss my project and how to make it successful. Thanks!

Thanks for sharing such a nice project 😍

@MrProjectsoPedia

Жыл бұрын

I'm glad to hear that 😊♥️.

sir cAN YOU MAKE A TUTORIAL FOR THIS CODE ? thanks sirrrrr i subscribed to you

Awesome projects 🔥🔥🔥🔥🔥

Hi bro nice project but i dont have motor drive shield i only have a normal motor driver can you please tell what i should do pls

What to change in coding to change its speed and its distance limit?

Newping and afmotor How do I download it then?

What battery did you use? mine is also 9V but it doesnt seem to work motor wont move a bit, but the other parts work

@MrProjectsoPedia

2 жыл бұрын

Use 2 li-ion battery (18560)

@gulrahana9158

Жыл бұрын

Was it solved? What was the problem? How much time did you need to make this project? Please tell me.

@nourintasnim8236

Жыл бұрын

Is your problem solved?

Hi we followed the video, and we tried the code, but the bot is doing the opposite of what its supposed to. We have tried everything and we now don't know what to do. Is there any other code that you recommend?

@RPI_Arduinotronics

Жыл бұрын

Try interchanging the wires of the motor

Thank you 🎉❤

Bro i have 12v lithium ion battery set, it has three wires, how to connect those wires in motor driver

Can I use 6 AA batteries

Nice Bro, just like to know where I can get the mounting frame (Blue plastic as shown in 0:31) which I can install the HC-SR04 and fixed it to the chassis

@MrProjectsoPedia

3 жыл бұрын

I bought from it from amazon.

I have an assignement for my I.T. class in school, that requires to create a prototype of an autonomic robot that displays advertisements. So I found this video and decided to build my prototype based on this guide. The only thing that bothers me are the people in the comments, who say that the motors are not working. My suspicion is that they simply forgot to install the AdaFruit Motor Driver library, because I don't feel like the problem is in the assemblage. Please share any of your thoughts about this problem, thanks!

@MrProjectsoPedia

5 ай бұрын

It's not perfect, I know, but it's working. It depends on several factors, such as the battery you are using, motor speed, and the need for a perfect wheel. The IR sensor needs to be properly calibrated. If you are familiar with Arduino, you can make it work. For newbies, it's a good project for learning and debugging.

hey your robot is amazing but i have a question , when the robot finishes following the line does the power turn off or it continues wasting battery ?

@amartechs9267

2 жыл бұрын

It continues to waste the battery's power

@MrProjectsoPedia

2 жыл бұрын

If the robot reaches the stopping point, then the motor turns off, so little power will be used.

Hey can you tell me is it RELIABLE to follow your video instructions???

Just amazing project 🥰😍😍. Thanks for share code😍❤️✌️

@MrProjectsoPedia

3 жыл бұрын

Welcome 💖💖 #do subscribe😊💙

@tanvirhossen5473

3 жыл бұрын

@@MrProjectsoPedia done😊

Wow thanks

Arduino is not powering while stacking the motor driver. I have connected the motor driver to a 9v battery. Could you pls support.

@MrProjectsoPedia

11 ай бұрын

It will not work with 9v battery. Try to use 18056 lithium ion battery

hi sir, is it okay if I replace the 9v and i use 2pc 18650 3.7 battery 2200mAh in total of 7.4v and jumper it to the 9v on the motor shield arduino base on the video?

@mohuyasaha3275

Жыл бұрын

Yes

What kind of jumper wires you are using sir? Male to male.. Male to female or female to female.

@Narendra...2556

10 ай бұрын

Yes??

New subscriber🤚🤗

@MrProjectsoPedia

2 жыл бұрын

Thank you ❤❤

Bro you do coding but u only see uplod in coding pls see what we can do in coding and this idea can work pls say me

🛑🛑🛑*CODE NOT WORKING*🛑🛑🛑All good I started before 10 days to Science day, all is completed but now code is not worinkg day after tomorrow is science day 😢

@SylvanDias

3 ай бұрын

😅

@naeemahmad6685

3 ай бұрын

Real moye moye

@user-pl2ne3dq3x

2 ай бұрын

Same 😢

Sir Motors are not working...

for the code (else if(analogRead(Lefts)

@MrProjectsoPedia

Жыл бұрын

It's for detecting light brightness. For example, if the IR sensor is on the black track, then less light will be visible for the IR sensor. So 350 is a threshold value for the IR sensor to make an action.

احسنت well done 👍 🇰🇼

We uploaded the code in to arduino succesfully, but we can't understand if it's working or not. How can we understand the motors are working?

@MrProjectsoPedia

3 жыл бұрын

What I said you on instagram if it's not work. We need to test the motor driver with different code.

@infernitecallofduty1827

2 жыл бұрын

Bro pls give me proper code because in my condition the code is showing many errors.pls help

kalo sensor nya pake tc 5000 bisa bang?

How to connect with L298N motor driver please share

Can you tell me which battery are you using in this video?

@MrProjectsoPedia

Жыл бұрын

In the video Im using lithium ion battery 18650.

bro i have made this without servo but there is no power supply to the ir sensor instead of 5v there is only 2v is supplied please tell a solution for it

@MrProjectsoPedia

Жыл бұрын

hey, The voltage required for IR sensor is around 3.3v to 5 v . Tip: Use lithium Ion battery for motor driver.

Sir is me motor ki positive or negative wire kon se hi hi ye issue araha hi kindly ye bta de ❤

@anipparmar1429

4 ай бұрын

Same

Thanks for the video, one error in the code tho, the library newPing.h is not found where can I find it?

@MrProjectsoPedia

Жыл бұрын

You need to install the newPing library. Watch the video again.

can we use l298n motor driver??

@MrProjectsoPedia

11 ай бұрын

No, I have created the same project by using l298n motor driver on my second channel.

If I want to make the car follow white line , what I should do?

@MrProjectsoPedia

5 ай бұрын

You can do that but make sure the surface need to be black and you can add white line on it. In the code where if statement defines, you need to change the 0 into 1 and 1 into 0. It will work.

hola me a botado este error #include y no levanta el codigo alguno de uds tiene la funcion o lo que falta

@MrProjectsoPedia

Жыл бұрын

¡Hola! ¿Has instalado la biblioteca?

What is the AFMotor library? I can't find it in the library manager.

@MrProjectsoPedia

3 жыл бұрын

You can download from this website. github.com/adafruit/Adafruit-Motor-Shield-library

@Connor-lv9wt

3 жыл бұрын

@@MrProjectsoPedia thanks! great project by the way :D

@MrProjectsoPedia

3 жыл бұрын

@@Connor-lv9wt 💙💙

THANK YOU

@MrProjectsoPedia

2 жыл бұрын

Anytime ❤️❤️

Nice project Sir, if you can please send ppt of this project.

@MrProjectsoPedia

2 жыл бұрын

Thanks for watcing❤🧡 But i don't have PPT ) :

Bro I need code for the robot which should just stop when it detects object but not avoiding the object and moves

@MrProjectsoPedia

Жыл бұрын

Ok send me your email address.

@sumeetpal5232

Жыл бұрын

I also want the same code for stopping

Sir in my laptop the coding is not compiling please answer

@MrProjectsoPedia

Жыл бұрын

Could you contact me on instagram.

Can we use power Bank of10000mah battery

@MrProjectsoPedia

3 жыл бұрын

Yes, you can

In 3:38 where we attach that echo and trig bin you only said about 5v and gnd

@MrProjectsoPedia

7 ай бұрын

Check out my website, i have returned a blog on it

It was not working with 9v battery. What is the solution? How much powerful battery should I use?

@MrProjectsoPedia

3 жыл бұрын

Use can use two 3.7 v lithium ion battery.

@gulrahana9158

Жыл бұрын

Was it solved? What was the problem? How much time did you need to make this project? Please tell me.

I did the project.the motor working but wheel r not rolling so what can I do now?

@MrProjectsoPedia

Жыл бұрын

what types of battery are you using?

@gulrahana9158

Жыл бұрын

Was it solved? What was the problem? How much time did you need to make this project? Please tell me.

Hey kindly upload the link 🔗 for Arduino shield library

@MrProjectsoPedia

3 жыл бұрын

Check the description now I added a link of arduino motor driver library. Thanks for guidance😊

NewPng.h. It is showing no such file detected..how to fix that?

@MrProjectsoPedia

Жыл бұрын

Hii, have you install the newping library?

sir motors are not working sir !! im using 20,000 mah power bank !! what should i do

@adwaitsworld2361

3 ай бұрын

it might not be working because of the wheight

I have used two li-ion battery of 3.7v each and a total of 7.4 v but the ultrasonic sensor are not detecting any object in front of it and the servo motor are also not moving

@noobplayz2003

7 ай бұрын

He used a 9v battery pack

@MrProjectsoPedia

7 ай бұрын

Power is enough. Please check the connection

@nehajalan5837

7 ай бұрын

@@MrProjectsoPedia all the connections are correct.

Very nice project sir but i have a quary in my project.wheels of robot is not running while ultrasonic sensor or ir sensor run and servo motor are running ...........and some time wheels one of the wheel move very slowly .so what can i do for that ...

@su_dady3218

2 жыл бұрын

I have same issue

@MrProjectsoPedia

2 жыл бұрын

Contact me on instagram: _mr_electrouino_ I will tell you the secret of its working. 😅😅

@alialahmad3396

2 жыл бұрын

bro please ihave the same issue ..tell me what i can do for that!!!!

@bharathigovindaraju5287

Жыл бұрын

No secrets behind this problem. actually this is the principle on which it works

@yousefali652

Жыл бұрын

@@su_dady3218 I have same issue Did you fix it ????? Please help me

Wow

@MrProjectsoPedia

3 жыл бұрын

Thanks😊💖

Hey...I built this robot and all the parts are on but the robot doesn't move..I even uploaded the code Help pls... (i used a 9v battery)

@MrProjectsoPedia

2 жыл бұрын

Contact Me on instagram: _mr_electrouino

@gulrahana9158

Жыл бұрын

Was it solved? What was the problem? How much time did you need to make this project? Please tell me.

sir error is( newPing.h: No such file or directory ) plz solve my problem sir. sir i want to make some more modifcations to it can you help me sir please.

@MrProjectsoPedia

2 жыл бұрын

bro you need to install newPing library. you can download it from this website. bitbucket.org/teckel12/arduino-new-ping/downloads/

My robot is not running but the code is correct. What should I do? I just follow the circuit diagram and I already uploaded the needed files in the arduino library. 🥺

@MrProjectsoPedia

3 жыл бұрын

What is happening Does robot moving or not?

@gelayvelasco6601

3 жыл бұрын

The robot is not moving and the wheels is only running when the arduino cable is connected to the pc and arduino uno.

@MrProjectsoPedia

3 жыл бұрын

Contact me on instagram. _mr_electrouino_

@gelayvelasco6601

3 жыл бұрын

DM sent, kindly check. Thank you

@bharathigovindaraju5287

Жыл бұрын

@@gelayvelasco6601 it means ur suppling low current increase ur power supply it should be 7v to 12v for the best performance

Motors are not working

@ekambro9017

4 ай бұрын

Bro then use good quality brushless motors and they will work 👍🏻👍🏻

Can i connect 12v 2.5 amp lithium ion battery pack directly to the motor driver,and replace the gear motor with 775dc motor

@MrProjectsoPedia

2 жыл бұрын

I don't think so it can handle that much current. The motor driver started heating and shut down automatically or damage after some time. I'm not sure about that, Let me know if you tried it.

@nelvingeorge2722

2 жыл бұрын

@@MrProjectsoPedia please Tell me that how much current and voltage that can we supply to the motor driver

@MrProjectsoPedia

2 жыл бұрын

@@nelvingeorge2722 voltage :4.5 V to 36 V current : 500 mA to 1.5mA. I'm not sure about current because in datasheet I'm not able to find current max values.

@nelvingeorge2722

2 жыл бұрын

@@MrProjectsoPedia if its possible can you please make an video (or article that includes circuit diagram and arduino codes) about same robot by replacing the motor driver with l298n motor driver. Because as far as my knowledge this L298n motor driver is more efficient than l293d. And also l298 motor driver can be used for large power efficient robotic projects

I have different type of Arduino uno , will it work

@MrProjectsoPedia

6 ай бұрын

Which one?

for the motor driver ,can i use L298N MOTOR DRIVER MODULE?

@MrProjectsoPedia

Жыл бұрын

Check out this video. I have used L298N motor driver for the same task. kzread.info/dash/bejne/l6CNtNJ7gbG5hso.html

❤️❤️❤️❤️

arduino obstacle avoidance line follower robot code invild why

Hello, I watched your video. Then I made the robot as you showed. But the robot does not move. Could you help me how to move the robot please?

@MrProjectsoPedia

2 жыл бұрын

What type of battery are using?

@c-4a3sharmilabogadhi62

2 жыл бұрын

Yes sir... Mine also the same problem

@c-4a3sharmilabogadhi62

2 жыл бұрын

Could you please help me out this

Bro need your help ... I made the same circuit but it not following the line

@MrProjectsoPedia

2 жыл бұрын

Contact me on instagram: _mr_electrouino

@gulrahana9158

Жыл бұрын

Was it solved? What was the problem? How much time did you need to make this project? Please tell me.

I want to do this with two gear motor.plz give me the code

@MrProjectsoPedia

5 ай бұрын

Can you please check out my second channel video.

Nice project but my car is not detecting black line and not moving according to the black line it is going straight

@MrProjectsoPedia

2 жыл бұрын

Have you calibrated the ir sensor as I showed in the video?

@adityasoni2030

2 жыл бұрын

@@MrProjectsoPedia yes

@adityasoni2030

2 жыл бұрын

@@MrProjectsoPedia i think I don't have a good quality ir sensor and the ir sensor shown in the video is different

Arduino idle says that newping.h no such a file or director

@MrProjectsoPedia

Жыл бұрын

Hey, have you install the newping library?

sir how can i add bluetooth module to this project \

@MrProjectsoPedia

Жыл бұрын

I going to make a video on this topic.

@danieljavier7012

Жыл бұрын

@@MrProjectsoPedia i hope you will use l293d motor driver

Hello, please give me the code of this program, I really need it 🙏🙏 please🙏🙏

@MrProjectsoPedia

2 жыл бұрын

Code link is in description.

Sir, I need your help, my motors are running too slow. I have used 3.4v battery but it's running too slow😢😢

@noobplayz2003

7 ай бұрын

He used a 9v battery pack

@MrProjectsoPedia

7 ай бұрын

There is a option to increase the speed via code.

@MrProjectsoPedia

7 ай бұрын

I have used homemade 9v battery which made of lithium ion cell.

It say that newping did not find pls help

@MrProjectsoPedia

Жыл бұрын

Hey, have you install the newping library?

What is the type of battery that you used in the video ???

@MrProjectsoPedia

Жыл бұрын

It's a lithium ion battery and the voltage is 7.4v.

Sir, can you make a video about a robotic arm car.

@MrProjectsoPedia

2 жыл бұрын

Ok I will, Note it 📝 Thank for watching ❤️❤️

@fouzanjaved5441

2 жыл бұрын

@@MrProjectsoPedia, make an Arduino 6 dof robotic arm car.

@MrProjectsoPedia

2 жыл бұрын

@@fouzanjaved5441 will see 👍

@fouzanjaved5441

2 жыл бұрын

@@MrProjectsoPedia, Sir, what courses do you learn to get into the robotics field? Sir, tell me, are you a mechanical engineer or electrical engineer, or mechatronics engineer? Sir, I want to become a robotics engineer like you, sir, what do I study to get into robotic engineering?

Bro I can use 18650 battery right?

@MrProjectsoPedia

2 жыл бұрын

Yes you can use that.

@amartechs9267

2 жыл бұрын

@@MrProjectsoPedia okay thanks

It mentioned that ultrasonic sensor connection is wrong in ur description Need the right connection

@thehitmanshow4528

3 жыл бұрын

ya i am also getting same issue...

@mumukshuhg474

3 жыл бұрын

Yah need proper connections based on the program they have given !

@MrProjectsoPedia

3 жыл бұрын

I did Thanks

Hello sir , can I get a updated code for this project

@MrProjectsoPedia

Жыл бұрын

I have updated the code. Check out my website for the code.

Can you program the code using scratch or pictoblox please

@MrProjectsoPedia

2 жыл бұрын

Yes I written the code from scratch .

Hello, when I am connecting the wires of the battery all the sensors and Arduino are getting power but the motor is not working and the robot is not moving

@MrProjectsoPedia

7 ай бұрын

Hii, What type of battery are you using

@nehajalan5837

7 ай бұрын

@@MrProjectsoPedia 2X3.7v lithium ion battery

@MrProjectsoPedia

7 ай бұрын

The Voltage is sufficient. Can you please check the connection of motor driver

@nehajalan5837

7 ай бұрын

@@MrProjectsoPedia all the connections are correct

@MrProjectsoPedia

7 ай бұрын

Have you tested the motor Driver?

Beli kitnya dimana ini, dan beh nggak share codingnya?

@MrProjectsoPedia

2 жыл бұрын

Lihat deskripsi untuk kode.

where to update the newping.h file?

@MrProjectsoPedia

2 жыл бұрын

You download it from arduino ide. Go to tool -> click on manage library -> Search the library and install it.

should I use 9v battery

@MrProjectsoPedia

Жыл бұрын

No, use lithium ion battery.

@nivedSayooj

11 ай бұрын

thanks

Bro we can use hc o5 blutooth module

@MrProjectsoPedia

3 жыл бұрын

Yes you can

@technicalmd975

3 жыл бұрын

@@MrProjectsoPedia it can be work for your given code ... Like backward, forward etc... And I am using 60rpm geared motor plz iam requesting 🙏 plz reply Karo 😫😭😭😭

@technicalmd975

3 жыл бұрын

Halo plz reply

@MrProjectsoPedia

3 жыл бұрын

Yes possible but I don't have code right now. I WILL be doing it in upcoming video.

Bro can I use a line of any colour?

@MrProjectsoPedia

2 жыл бұрын

It will work but not Perfectly because Black is said to be perfect absorber and white is to be said perfect reflector. The reflection will be different for other colors.

@amartechs9267

2 жыл бұрын

@@MrProjectsoPedia got it👍👍 Thanks

Not working help

Why my robot is not moving even my ir sensors are working perfectly

@MrProjectsoPedia

Жыл бұрын

What type battery are you using?

@DZHoPZ

Жыл бұрын

@@MrProjectsoPedia Li - ion 2600mh 3.7v cell 2×

Can I connect 20V charger 🤔

@MrProjectsoPedia

2 жыл бұрын

Yes, you can connect 20v charger to motor driver, but make sure that you have supply 5v to arduino.

@mdtechguru5503

2 жыл бұрын

@@MrProjectsoPedia but how it is possible to providing 20V to motor driver and 5V to Arduino 🤔 circuit Diagram please 🙏

@mdtechguru5503

2 жыл бұрын

If I connect 20V to motor driver then Motor driver send voltage automatically to Arduino Then how it is possible 🤠 to send only 5V to Arduino ?

@MrProjectsoPedia

2 жыл бұрын

@@mdtechguru5503 you can connect 9v batttery to arduino DC jack

@mdtechguru5503

2 жыл бұрын

@@MrProjectsoPedia if I connect separate current to Arduino and Motor driver then what about jumper pin and jumper wire ?

can you tell me the board dimensions please

@gaddekushiram6318

Жыл бұрын

what is the board name

Please give me the link of all materials

@MrProjectsoPedia

2 жыл бұрын

Check the decription for product link.

Gan kalo ada projek RLN yang bisa nyiram tanaman otomatis ane kasih tutorialnya gan

@MrProjectsoPedia

Жыл бұрын

Saya tidak mengerti. mengapa Anda ingin mengirimi saya tutorial.

@GTS191

Жыл бұрын

@@MrProjectsoPedia tidak jadi

Anyone did this and did it work???

Hello bro I have made it without servo motor but the ir sensor are not working

@MrProjectsoPedia

Жыл бұрын

hii, You might be connected it wrong. check the circuit diagram.

@MrProjectsoPedia

Жыл бұрын

hii, You might be connected it wrong. check the circuit diagram.

@gamingblueforce390

Жыл бұрын

No it is in correct connection but the power supply is not correct instead of 5v there is less than 2v is supplied to the ir sensor

@MrProjectsoPedia

Жыл бұрын

@@gamingblueforce390 The voltage required for IR sensor is around 3.3v to 5 v . Tip: Use lithium Ion battery for motor driver.

@gulrahana9158

Жыл бұрын

Was it solved? What was the problem? How much time did you need to make this project? Please tell me.

Can u please reply with the code

@MrProjectsoPedia

2 жыл бұрын

You will find the code link is in description

hii,a question, at which email address can I write to you?

@MrProjectsoPedia

2 жыл бұрын

Hello, You can contact me on this Email address: mr.electrouino786@gmail.com

motors are not spinning, please help

@MrProjectsoPedia

6 ай бұрын

What type of battery are you using?

@MorshedulHoque

6 ай бұрын

@@MrProjectsoPedia lithium battery