Arduino CNC Shield Overview
Ғылым және технология
In this video I explain the Arduino CNC Shield in detail. I cover where the motor controllers go, all of the pins, and even an example on how to control the CNC Shield Spindle with GRBL commands M3, M4, and M5.
Link to related blog post:
www.diyengineers.com/2023/01/05/grbl-with-arduino-cnc-shield-complete-guide
Items used in this video (affiliate links):
*As an Amazon & Ebay Associate I earn from qualifying purchases.
Arduino UNO:
amzn.to/3U7xAoT
Arduino CNC Shield:
amzn.to/3JtBsvC
Chapters:
0:00 Intro
1:37 Arduino CNC Shield Pins
4:21 Controlling with GRBL
Пікірлер: 20
OK I am doing it. I have assembled a Dremel Drill Press converted to a 3 axis Mini Mill. All the 3D Printed parts are done and tonight I received the extra Motors, Power Supply, Arduino CNC Shield, Motor Drivers, but I forgot to order the Motor Couplers so Minor Delay. Cutters are due this week, If this works I will be able to machine Model Train Chassis for special trains that were not offered in S Scale the scale i work in. Thank for a great tutorial . D
Thank you very much for making these video. They are really usefull for beginners like me.
@diyengineers
Ай бұрын
Thanks for watching!
Thank you sir❤
@diyengineers
Жыл бұрын
Thanks for watching!
thank you for your informations :) can you maybe help me on how to control the stepper motor speed with a potentiometer knob? how would i implement that?
Nice!
@diyengineers
Ай бұрын
Thanks for watching!
Very informative narration. I have designed and fabricated my CNC Plotter. My project can be accessed on my channel danjunk-DIY on You tube. I am using CNC Shield board. But I forgot to enable the CNC shield by putting a jumper at " Enable header pins" as you explained. Even then, my machine is working fine. I don't understand this "Enable" aspect of the CNC Shield. Please clarify. I am controlling my plotting using Universal Gcode Sender platform.
Will the cnc shield work with pi 3
hi, what i need to do to mount 2 motors on x and 2 on y?
Please make a video. How to uplode grbl on arduino nano.
Hello sir I made cnc machine Arduino uno grbl z and y only one direction run pls
Great timing! If only this setup could read SD cards, it would be perfect bc of the price and size
@flyingmonkey3822
Жыл бұрын
Maybe I2C connect to a separate 382p that reads SD cards and communicates via a small LCD and have some manual jogging buttons?
@flyingmonkey3822
Жыл бұрын
Oh look! A rabbit hole
@diyengineers
Жыл бұрын
I thought about doing this, but ended up not doing so as I haven't built something specific yet. You can buy a low cost SD card reader that connects to an Arduino and have the Arduino send the g-code commands to the Arduino running GRBL.
@diyengineers
Жыл бұрын
Thanks for watching!
Where do you buy a TRUSTWORTHY shield. I've read that some are FAKE and will DESTROY your Arduino! Their pins are soldered incorrectly and seem to be a Chinese fake.
@eraldylli
3 ай бұрын
Dont worry about that, it's not a thing.