I've watched about 6 or 7 how-to-set-nocking-point videos. While the others are very good videos, this one is by far the most comprehensive and useful, especially for a beginner like me. I will be referring to this a few more times in the future. Great instruction, guys!

@benhawkes9050

4 жыл бұрын

Agreed, great video, being a clueless beginner I was just going to use a square and adjust elevation on sights. Really nice to learn how to do it properly 👌

Well done on winning the GOLD Steve. Checking up every time to see how you doing. You had me at the end... Nervs of steel. What a beautiful bow you have. Absolutely gorgeous. Acting very professional and keeping calm is halve the job done.

very good video, very informative. Much better than any of the other nocking point videos I've watched.

Again, very helpful and well presented video! Excellent work lads 👍🏼

great video - looking forward to seeing more tuning vids:)

Thanks Buddies For Taking The Time To Pass The Information On.✌🇺🇸

I wish you a lot of success in all the contests !!!! maximum concentration !!!

Thanks! Great video. I love the tshirt!

Great video guys

Glorious tutorial. GL in Tokyo guys!

Wow, superb video, good lesson for me.

Damn, that is a beautiful recurve.

i like the qay you do your nocking point it is simple and it realy works thankx so mutch for showing us

Zap a gap is my favorite super glue. The stuff is amazing and is used on high-speed remote-controlled airplanes. Costs a bit extra but well worth it.

Excellent. Danke!

Please do the plunger tuning with bareshaft, i would really love to see how pro players tuning their plunger

Nice video !

Great series of tuning videos guys. You can tell Beiter that you’re responsible for the sale of at least one bow vice (great piece of kit) and I also bought a Formula X riser based on the ease of alignment tuning your video demonstrates (the Faktor is a bitch to tune with those fiddly shims). Bit of a shoutout for Hoyt, the bow was in perfect alignment (using MK Mach X limbs) straight out of the box.

Nice and helpful Thanks

Very useful ITS a cool video 😌

Great clip, very helpful :) btw can you tell me what is this mounting bracket you use on the table?

Very useful

Echo some of the comments below - a reall good video! Thanks guys.

Great explanation, thank you. So if you can make a bare shaft arrow hit the same as flighted arrow, why do we have arrows with flights?

Lo que más me admira, es el enorme desperdicio de hilo‼️

"Please stay tuned" Maybe keep that for the last one of the series ?

muito bom, parabéns pela aula

Are there more tuning videos? I can only find #1 & #2 :-(

I've found using a very tight "walking" nock point helps when bare shaft tuning for nock height. I'm able to fire an end, adjust my nock point by screwing it down or up the serving and shoot another end until it is in line with my fletched arrows. Once I have my walking nock point in the right location, I'll tie in a permanent nock point underneath, cut the walking nock off, load an arrow and tie the top nocking point.

@bltefft

4 жыл бұрын

Me, too. I don't remove my tied in nocking points, I just "screw" them up or down the string. When I get it where I want it, I make my last knot a square knot and burn it off. I do it to both nocking points.

Best bow tuning video ever! Can't wait for the next one! (Why don't you just move the original knocking point to the right position directly?? Then you don't need to tie a new one......)

Have you used the beiter nocking point before? Any thoughts if so?

Damn guys de kwaliteit video's gaat omhoog! Ben stiekem wel een beetje trots op jullie

Steve, did you modify the grip that came with the bow, or something else?

Hi... Does the nocking point shifted once the string being broken? Or it doesn't matter? Once the glue harden, there's no way to make any changes... How often do you change the string?

Can you explain the bare shafts part and why they are used to calibrate it. Is this as important for bare bow archery?

Trying to stay tuned but its tough without "how to tuning" vids ;)

Can the knock point be moved up or down to help w bow tuning, i have a tail high tear, shooting thru a whisker so no upwards adjustment on biscuit..any advice? Besides ditching biscuit?

Super fabbo guys ..😁

If you tie those on right, you can twist them up and down your serving. Been doing it that way for over 30 years. Never had to cut one off and redo it. This is the whole deal about a tied on nocking point, is the sustainability of the tied on nock up or down the bow string serving. Just screws up or down. Makes it super nice to dial in super precise. Also, no need for a lower nocking point. Just an upper. Wrap it 6-8 times and you have plenty to grab on to to twist it up and down the serving. With split finger, you have 2 fingers pushing up on the arrow nock, so no need for that lower nocking point.

If it's possible can u guys make a string with how to put on servings to plz???

Great video. I just use an upper knocking point. What do you think. Love watching you two shoot btw.

@acvarthered

4 жыл бұрын

Yeah I really don't understand the point of nocking points both above and below. How do you hit that little gap when not looking? I just use a top nock also. Put the arrow anywhere on the string below the nocking point and slide it up into position. I guess these guys are not doing combat archery.

nice

So your arrows are not square with arrows rest slightly higher? Only just got a bow I have just been sighting 90 degrees so far from arrow sitting on rest point but that’s quite anoyying because I have to turn the bow sideways to sight it. Might do this so I can be more consistent

There’s a lot of people doing videos on tying knock points but nobody discusses what size serving they use.

Please can you tell me where i can buy the bow stand?

That was a great video apart from the use of super-glue which I believe eats into some string materials.

Nice one! Are you planning to talk about the relation between the tiller/finger pressure or bow center of gravity and nock travel?

@TripleTroubleArchery

5 жыл бұрын

There’s a tiller video coming up!

@sjankarcher

5 жыл бұрын

@@TripleTroubleArchery Hasn't tiller settings affect where the nocking point should be?

@TripleTroubleArchery

5 жыл бұрын

Only a tiny bit, nothing to worry about too much

Can you do a video showcasing Steve's grip? The carbon fiber looks very cool.

@TripleTroubleArchery

5 жыл бұрын

Yup! Will do that!

❤❤❤❤

Where can I get that, Dutchtarget tshirt?

Hi, The hardest thing I find when setting up a new bow, is getting the arrow rest to stick on straight and level. Any tips or thoughts on doing a video on how to make sure the arrow rest is stuck on correctly? Thanks Daniel

@TripleTroubleArchery

5 жыл бұрын

Make sure you clean the surface you’re gonna stick the rest to. Then put the button in the hole so you’re sure that the rest will be aligned with the button. It doesn’t matter if you stick the rest on perfectly straight or tilted a little backwards. Tilting the rest a bit backwards will give the supporting arm a bit of a slope and your arrow will stay in its place easier. Does this help you? Cheers!

@ArcheryblogUk

5 жыл бұрын

@@TripleTroubleArchery thanks. Another question now, if you reverse your sight, and slide it on backwards (behind the riser) should the sight pin always line up with the string?

@TripleTroubleArchery

5 жыл бұрын

In an ideal world, yes. In Sjefs case it's about a cm left of the string. This tells us it doesn't have to be a disaster if it isn't completely in the middle

Mantap keren

Quick question, doing nocking point with some extra space within it when an arrow is nocked is what I am taught to do. Which makes sense to me because when you pull the string back the nocking points kinda squeeze together(resulting in the nock sitting perfectly in between the nocking point). Seeing you do the nocking point with absolutely no spaces in between when an arrow is nocked makes me wonder why you would do that, since then the nock will be squeezed tightly by the nocking points when it is strung?

@TripleTroubleArchery

5 жыл бұрын

If you use Beiter nocks, they are made to not have that problem, they have two cavities for the nocking point to go into

@windyblower1211

5 жыл бұрын

@@TripleTroubleArchery ooh, that is something i did not know about. Are the cavities found on the big beiter G-nocks or is it on every nock they make?

@monicarestrepoleon1481

5 жыл бұрын

@@windyblower1211I think its every nock, you can also check your own for the cavity

What serving material are you using for your nocking point? (The yellow serving material)

@TripleTroubleArchery

4 жыл бұрын

BCY 350 Nylon

Hi Steve. What is the stand called you put your bow into please? Thank you

if you squeeze all your rhomboids together will you push the plunger into the arrow and how do you guys think about using the trapezius ?wont that flick and inch the nock or press it against the nock points ?

@TripleTroubleArchery

5 жыл бұрын

We have thought about it, and have no idea 🤷🏼‍♂️🤷🏼‍♂️🤷🏼‍♂️🤷🏼‍♂️

@mortenjacobsen5673

5 жыл бұрын

@@TripleTroubleArchery maybe you could do a video on it ...? perfect excuse to mess around with some high speed slow motion footage . stiff plunger vs hard , squeezing both (all rhomboids )vs just the draw arm ones

How did ya know those arrows were well-tuned to the bow?

Wat is de reden dat je 15x rond gaat i.p.v. de standaard 4x? Is dit een persoonlijke keuze, of zit hier een technische reden achter? Duidelijke video verder, top!

@TripleTroubleArchery

5 жыл бұрын

Behalve dat het steviger is, heeft Steve hier geen technische reden voor.

Is that a standard Hoyt Formula X grip or something custom?

@TripleTroubleArchery

5 жыл бұрын

Steve is using his own grip, and puts it on the bow he is shooting at that moment. Will make a video about it

what string material do you guys use for your nocking points?

@TripleTroubleArchery

5 жыл бұрын

BCY 350 Nylon

@windyblower1211

5 жыл бұрын

@@TripleTroubleArchery dental floss works right?

@TripleTroubleArchery

5 жыл бұрын

@@windyblower1211 If it works for you it works for us!

@windyblower1211

5 жыл бұрын

@@TripleTroubleArchery haha ok

@dottorfoggy

5 жыл бұрын

@@TripleTroubleArchery do you use the same string for the serving?

People are using "nocking point" and "nocking height" interchangeably. I believe this is where confusion begins.. The nocking height is the measurement to the bottom of the top nock. The nocking point it where the center of the shaft meets the string. This would be the distance downward equal to 1/2 the diameter of the arrow nock itself.

After you set the first nocking point your arrows shot low. How did you know it wasn't just the site causing the issue?

@benandsylvia

2 жыл бұрын

Because he's very accurate, he only needs to shoot a few arrows to recognize that the grouping was low. He keeps moving the nock until he's satisfied with the grouping.

😮😮😮😮😮😮

Hi archer What is the target's black color? I want to know the material

@TripleTroubleArchery

4 жыл бұрын

It's a Danage target

@user-nl1gd4xd8u

4 жыл бұрын

@@TripleTroubleArchery Thank you ^^

Hi

What type of thread was used in this video?

@TripleTroubleArchery

3 жыл бұрын

BCY 350 Nylon

Try pulling your nock thread through a glue stick first, wrap the thread around the glue stick and pull quickly, when the nocking points are in place use a lighter to burn off tags and melt the glue on the thread.

@LukePighetti

2 жыл бұрын

Great idea

@celticminstrel8252

2 жыл бұрын

@@LukePighetti I can't lay claim to it, I read it somewhere a few years ago, simple over hand knots, one on top of the string the other under, if you know what I mean, they work really well and are very secure.

What size thread do you use?

@TripleTroubleArchery

4 жыл бұрын

350 nylon

Thanks for teaching me And I am from India 🙏💐🫡👍

What dampers does Steve use?

@TripleTroubleArchery

5 жыл бұрын

Fivics VZ 2200

@filipposarv3440

5 жыл бұрын

Triple Trouble thank you! Great videos! ❤️🎯

How long is your string?

@TripleTroubleArchery

5 жыл бұрын

170cm

HAHAA... my 3 yard group looks like this dudes 30 meter group🤣, after my second day of shooting a traditional bow lol!

Grear

@sorensasse5109

4 жыл бұрын

Great

😎👍🏹🥇🇲🇾

Why not just make an adjustable nocking point? You can turn it around on the string and there is no need to cut the nocks off every time

I dont have a bow square...

I'm archery player in my school at the phillppines but I didn't have personal bow

can you get any more precise than this guy?

Ты настроил прицел для средней обмотки а стреляешь с завышенным намоткой . Не надо ли было перестроить прицел ? Видео не актуально.

Интересно. Но блин. Из-за австралийского акцента, некоторые слова не понятны. Нужны субтитры.

The first knot should be at lower 4 and the second knot at the upper 4 ....

@dumitracheadriansabin5594

5 жыл бұрын

i will ignore the olimpic shooter and will trust u

@ornatusvaranid

5 жыл бұрын

Me too, what would one of the world`s top archers know???

@gradimirmitrovic5676

4 жыл бұрын

😂 😂 😂 me too!

i smell dutch

Give away a bow sir

So why put the super glue on before you burn the extra pieces rather than after you burn the extra pieces? Also subscribe to my channel! Lol

@TripleTroubleArchery

5 жыл бұрын

Good question! Will ask Steve why he does this!

I’m going to get flamed for this comment but why do you need a square dedicated to establish a “starting point”. Why not use anything with a right angle if it’s going to be raised a quarter inch as a place to start testing. Everyone is so equipment dependent these days...

@TripleTroubleArchery

3 жыл бұрын

Because this clips onto the string so you have your hands free, has easy engravings and is designed exactly for this particular case :)

@yinshah3303

3 жыл бұрын

@@TripleTroubleArchery yes it’s another single use tool that exactly accomplished nothing but establish what? A more precise “starting” point at which you start the very much old fashioned trial and error method of fine tuning. I get that every “hobby” has its specialty tools but this one is very “special” indeed.

@TripleTroubleArchery

3 жыл бұрын

Except I have one in my quiver at all times since it's easy to check my tiller, brace height and nocking point. If I wouldn't have one of these I'd have to get a ruler but rulers don't have clips to attach it to the string. I get your point of there being a lot of single use products but I think the bow square is simply not a good example

@yinshah3303

3 жыл бұрын

@@TripleTroubleArchery thanks for your input. I’ll see if i change my mind as i get into archery more.

15 knots.....really? 6 should be fine

@TripleTroubleArchery

5 жыл бұрын

It should, but in this case, Steve chooses for some extra security.

@ornatusvaranid

5 жыл бұрын

You question why one of the world`s top archers uses more knots as if he wouldn`t know what suits him best and what would work just as well for others!?

Everyone is using nocking clambs, this stupid metal things - the string is much more classy and looks much better (y)

Never and i mean never use super glue. Just learn how to tie a proper knot.

@MrScathgadai

4 жыл бұрын

most pros do it. there are multiple videos, with multiple pros doing it.

@vincentik7179

4 жыл бұрын

@@MrScathgadai i have been making strings for over 30 years now en have seen many broken strings because of idiots aplying superglue on their strings. Just learn how to tie a proper nok point. Its real easy just google it.

It would look a lot nicer if you just use a brass Nock point

nice