Tim talks about the template design process, shows you how to do the trace the test the cut and the Final Cut to finish off the part.
Жүктеу.....
Пікірлер: 22
@bobm2033 ай бұрын
Just ordered one as well… awesome video, quick and to the point…oh yes and it works…😀
@TRCa51
3 ай бұрын
I actually sold this unit complete for more than I had in it. Took me about three weeks to figure out that was a mistake so I ordered another one and just now getting that up and running! Actually the best piece of equipment I have in the shop right now!I’m sure you’ll love yours! Thank you for taking the time to comment!
@bobm203
3 ай бұрын
@@TRCa51 Thanks…..Also ordered that X2 table attachment….looks like another real winner…..downside is the sitting & waiting
@TRCa51
3 ай бұрын
@bobm203 I did the X2 as well. When I ordered both of mine, my shipment was here in three days. Hopefully you have a quick wait also!
@Gabe_Herdz6 ай бұрын
This is my first time watching a video with you. I was looking for reviews to buy one and your video is hands down the best one (not affiliated). Just subscribed and following you. Keep it going! Cheers 🍻
@TRCa51
6 ай бұрын
Thank you so much for the kind words and taking the time to let me know! You’re exactly the reason why I do my KZread reviews! Great people networking together to share good information! Cheers brother and have a happy holidays!
@joell439 Жыл бұрын
Plasma Time ....... 👍👍😎👍👍 Thanks Tim for the one-take, real-life demonstration.
@TRCa51
Жыл бұрын
Nice to hear from you again, Joe! With such a new product, I don’t usually do things in a one take, but this one is so simple that you saw it all in real time action! Maybe not my best video but it’s definitely real! Always great to hear from you, buddy!
@deeguenveur9987 Жыл бұрын
Thanks for sharing this video Tim Always enjoy seeing how things are made stay cool!!!
@TRCa51
Жыл бұрын
Thank you D and Lee! Always so nice to hear from you! I hope your Vegas trip is going well!
@captainraypaul491910 ай бұрын
I just ordered my machine. Thanks for the video video 👍🏻👍🏻
@TRCa51
10 ай бұрын
You’re welcome! It sure is a handy piece of equipment to have in the shop to make cool and precise brackets! I hope you love yours, as much as I love mine!
@davidellison65714 ай бұрын
Did you fabricate the arm for routing the plasma cable? I need to find or make something and it's proving to be a bit elusive.
@TRCa51
4 ай бұрын
I you look and the beginning of the video you can see a loose clip on the garage door. All I did was hang it there and make sure there was enough slick for total table travel. Works great! I have recently sold this setup and have bough the Arkdroid x2 but have roughed the same way. Works great! Hope this helps! If not I'm here to help! cheers!
@MrGottaGo Жыл бұрын
🤘
@TRCa51
Жыл бұрын
Thank you for taking the time to comment! I believe it really helps! Have a wonderful day!
@bradjohnson190810 ай бұрын
How are you finding the machine now after you have had it for a while? use it often? Cheers
@TRCa51
10 ай бұрын
We left on a 2 Month Rd. trip in the beginning of August and will be back around one October. So far I really like it and it’s my third CNC plasma that I’ve owned. I find myself the things I do the most of our a set of one off tabs which it works really well for another just a little design details. I do load up a 2’ x 4’ sheet on the table and it’s nice to be able to index exactly where you want things to cut. It’s so easy to use. I find I use it more often than my other machines just because of the simplicity of drawing the part. I hope this helps, and you have any other questions. I’m here to help! I will definitely buy the machine again for just who I am. If you were looking to do production on complicated parts, probably not the correct machine for you. But if you’re looking to draw the part out on fusion and upload it that works also! Thank you for taking the time to comment! Cheers!
@ravenhhca7 ай бұрын
Heads up for Alibre users . Their CAD does not support plasma.
@TRCa51
7 ай бұрын
Good to know! Thank you for letting us know!
@OVOMOTO8 ай бұрын
"Stylus", not "stylist". A "stylist" does your hair. "Rocker switch", not rocker "panel" switch. A "rocker panel" is a car part. And that's only two minutes into the video. Very helpful instructional video otherwise. Thank you
@TRCa51
8 ай бұрын
Thank you for taking the time to comment as there is times I miss speak.
Пікірлер: 22
Just ordered one as well… awesome video, quick and to the point…oh yes and it works…😀
@TRCa51
3 ай бұрын
I actually sold this unit complete for more than I had in it. Took me about three weeks to figure out that was a mistake so I ordered another one and just now getting that up and running! Actually the best piece of equipment I have in the shop right now!I’m sure you’ll love yours! Thank you for taking the time to comment!
@bobm203
3 ай бұрын
@@TRCa51 Thanks…..Also ordered that X2 table attachment….looks like another real winner…..downside is the sitting & waiting
@TRCa51
3 ай бұрын
@bobm203 I did the X2 as well. When I ordered both of mine, my shipment was here in three days. Hopefully you have a quick wait also!
This is my first time watching a video with you. I was looking for reviews to buy one and your video is hands down the best one (not affiliated). Just subscribed and following you. Keep it going! Cheers 🍻
@TRCa51
6 ай бұрын
Thank you so much for the kind words and taking the time to let me know! You’re exactly the reason why I do my KZread reviews! Great people networking together to share good information! Cheers brother and have a happy holidays!
Plasma Time ....... 👍👍😎👍👍 Thanks Tim for the one-take, real-life demonstration.
@TRCa51
Жыл бұрын
Nice to hear from you again, Joe! With such a new product, I don’t usually do things in a one take, but this one is so simple that you saw it all in real time action! Maybe not my best video but it’s definitely real! Always great to hear from you, buddy!
Thanks for sharing this video Tim Always enjoy seeing how things are made stay cool!!!
@TRCa51
Жыл бұрын
Thank you D and Lee! Always so nice to hear from you! I hope your Vegas trip is going well!
I just ordered my machine. Thanks for the video video 👍🏻👍🏻
@TRCa51
10 ай бұрын
You’re welcome! It sure is a handy piece of equipment to have in the shop to make cool and precise brackets! I hope you love yours, as much as I love mine!
Did you fabricate the arm for routing the plasma cable? I need to find or make something and it's proving to be a bit elusive.
@TRCa51
4 ай бұрын
I you look and the beginning of the video you can see a loose clip on the garage door. All I did was hang it there and make sure there was enough slick for total table travel. Works great! I have recently sold this setup and have bough the Arkdroid x2 but have roughed the same way. Works great! Hope this helps! If not I'm here to help! cheers!
🤘
@TRCa51
Жыл бұрын
Thank you for taking the time to comment! I believe it really helps! Have a wonderful day!
How are you finding the machine now after you have had it for a while? use it often? Cheers
@TRCa51
10 ай бұрын
We left on a 2 Month Rd. trip in the beginning of August and will be back around one October. So far I really like it and it’s my third CNC plasma that I’ve owned. I find myself the things I do the most of our a set of one off tabs which it works really well for another just a little design details. I do load up a 2’ x 4’ sheet on the table and it’s nice to be able to index exactly where you want things to cut. It’s so easy to use. I find I use it more often than my other machines just because of the simplicity of drawing the part. I hope this helps, and you have any other questions. I’m here to help! I will definitely buy the machine again for just who I am. If you were looking to do production on complicated parts, probably not the correct machine for you. But if you’re looking to draw the part out on fusion and upload it that works also! Thank you for taking the time to comment! Cheers!
Heads up for Alibre users . Their CAD does not support plasma.
@TRCa51
7 ай бұрын
Good to know! Thank you for letting us know!
"Stylus", not "stylist". A "stylist" does your hair. "Rocker switch", not rocker "panel" switch. A "rocker panel" is a car part. And that's only two minutes into the video. Very helpful instructional video otherwise. Thank you
@TRCa51
8 ай бұрын
Thank you for taking the time to comment as there is times I miss speak.