rs660 aliexpress update and shifter stabilzer review... and some sound clips
Жүктеу.....
Пікірлер: 21
@irf888 Жыл бұрын
Hi. My pinch bolt is tight and yours should be too. The link should have no sideways movement what so ever. Aprilia use a soft aluminium, if you shear the thread don't worry, I would then suggest getting a stainless steel longer bolt and a lock tight nut so you can clamp that link properly. Regards.
@montiz333 Жыл бұрын
Yooo that RX7 looks clean AF! Thanks for the update tho I think im going to go this route save the cash. That shift stabilizer is interesting to me. I was one of the unfortunate buyers that got an RS660 with the linkage that falls off due to missing teeth so I've already replaced the bolt twice. Maybe that will cut down on vibration and keep mine from sliding down and falling off.
@densetsu_vegas
Жыл бұрын
Funny you mention that! I never had an issue, since I installed the stabilizer now mine keeps popping off! I am going to try to tighten the crap out of that bolt to see if it helps... if not I will look into aftermarket options. I know about a year ago people posted up in the facebook group that an aftermarket "fix" is out there. If I need it..a video will come haha
@montiz333
Жыл бұрын
@@densetsu_vegas sorry to hear that lol it was a major pain in the ass when it kept falling off on me. But Id be careful bro on tightening it to much, that stock bolt strips really easily, I think its aluminum. I replaced mine with a slightly longer bolt and it mostly did the trick. It still slides down but i was able to get like 2k miles out of it before it got to the edge and I just moved it up and tightened it again. Good luck tho ill be on the lookout for the next video.
@densetsu_vegas
Жыл бұрын
@@montiz333 I was on the freeway cruising in 6th when mine popped off the first time luckily...so when I finally had to get off on my exit I just pulled over and popped her on. I will look into a replacement now. Thank for the tip
@MadWilli
11 ай бұрын
@@densetsu_vegasit’s a faulty linkage go to the dealership and get the updated one under warranty
@mahanghorbani5237 ай бұрын
Suggestion: If you plan to make a video of the sound while riding, wrap your phone in two socks and put it in your pocket. It will eliminate the wind noise and we could only hear the exhaust. Thanks a lot.
@densetsu_vegas
7 ай бұрын
good to know, thank you!
@UpsideDownFork3 ай бұрын
Did you flash the ECU when you changed the exhaust?
@kieranbrown322310 ай бұрын
Great videos thanks. Is the noise from this exaust worth the money? How much louder roughly is it, 25%? Is it louder without annoying the neighbours, or getting pulled by the cops? Does it give a beefier sound? Many thanks 👍
@densetsu_vegas
10 ай бұрын
Yes to all. It's quite louder, espically in higher rpm. I am wanting a louder system now, that will annoy the neighbors, but I have not switched, because I feel this system sounds better than others. I really wanted a mivv, but that makes it sound like a Harley to me, while this system just sounds better. While on the bike it is pretty loud, but off the bike its not bad at all. For sure worth the money.
Пікірлер: 21
Hi. My pinch bolt is tight and yours should be too. The link should have no sideways movement what so ever. Aprilia use a soft aluminium, if you shear the thread don't worry, I would then suggest getting a stainless steel longer bolt and a lock tight nut so you can clamp that link properly. Regards.
Yooo that RX7 looks clean AF! Thanks for the update tho I think im going to go this route save the cash. That shift stabilizer is interesting to me. I was one of the unfortunate buyers that got an RS660 with the linkage that falls off due to missing teeth so I've already replaced the bolt twice. Maybe that will cut down on vibration and keep mine from sliding down and falling off.
@densetsu_vegas
Жыл бұрын
Funny you mention that! I never had an issue, since I installed the stabilizer now mine keeps popping off! I am going to try to tighten the crap out of that bolt to see if it helps... if not I will look into aftermarket options. I know about a year ago people posted up in the facebook group that an aftermarket "fix" is out there. If I need it..a video will come haha
@montiz333
Жыл бұрын
@@densetsu_vegas sorry to hear that lol it was a major pain in the ass when it kept falling off on me. But Id be careful bro on tightening it to much, that stock bolt strips really easily, I think its aluminum. I replaced mine with a slightly longer bolt and it mostly did the trick. It still slides down but i was able to get like 2k miles out of it before it got to the edge and I just moved it up and tightened it again. Good luck tho ill be on the lookout for the next video.
@densetsu_vegas
Жыл бұрын
@@montiz333 I was on the freeway cruising in 6th when mine popped off the first time luckily...so when I finally had to get off on my exit I just pulled over and popped her on. I will look into a replacement now. Thank for the tip
@MadWilli
11 ай бұрын
@@densetsu_vegasit’s a faulty linkage go to the dealership and get the updated one under warranty
Suggestion: If you plan to make a video of the sound while riding, wrap your phone in two socks and put it in your pocket. It will eliminate the wind noise and we could only hear the exhaust. Thanks a lot.
@densetsu_vegas
7 ай бұрын
good to know, thank you!
Did you flash the ECU when you changed the exhaust?
Great videos thanks. Is the noise from this exaust worth the money? How much louder roughly is it, 25%? Is it louder without annoying the neighbours, or getting pulled by the cops? Does it give a beefier sound? Many thanks 👍
@densetsu_vegas
10 ай бұрын
Yes to all. It's quite louder, espically in higher rpm. I am wanting a louder system now, that will annoy the neighbors, but I have not switched, because I feel this system sounds better than others. I really wanted a mivv, but that makes it sound like a Harley to me, while this system just sounds better. While on the bike it is pretty loud, but off the bike its not bad at all. For sure worth the money.
Is everything still going good with the setup?
@densetsu_vegas
Жыл бұрын
Yep, 7k miles now
Is that a rx7
Link exhaust please 🙏🙏🙏
@densetsu_vegas
Жыл бұрын
Just look up rs 660 exhaust on Ali express.
CHILLING?!?!
@densetsu_vegas
11 ай бұрын
It's my table
@HandolHani
11 ай бұрын
Absolute goat. Response
JUST