Thank you pilot.

The Eflite Apprentice is in my opinion the perfect plane to learn on. I helped a young fella learn on one like you have and it was beat up pretty bad. Even though it had scars from learning he was still able to fly it. These are well built planes from Eflite. I also recommend the use of a simulator for a beginner like Realflight 9.5. A simulator and this Apprentice is a perfect combination to learn on, especially if you are going it alone like I did. However, if you can learn at a flying field with an experienced Pilot you will progress more rapidly. Wesley, excellent tutorial. Well done my friend. 👍👍😊

@horsth9566

Жыл бұрын

Very nicely presented. Clear and concise, which is a great help to understand how it works and what to do. Thank you!!

Thanks Wes, for a very well informative video on setting this plane up with a DX transmitter. Well Done!

Good work Wes. That is a very good starter plane.

I bought this model , its on its way, but I did not realize the STS was bigger, now I feel stupid, and wonder if I would have been better off with the STS 1.5 meter? This will be my first plane

Thank you for this nice and useful video! I would like to ask your opinion about an issue. When I put standard alcaline AA batteries in the DXS receiver the capacity is half consumed after 1 long flight. Is it normal or might it be a problem with the transmitter ?

It's called a vernier caliper

I got the apprentice sts for my first plane,is it just as good?

I'm having an issue with my mini apprentice; bnf out of the box, assembled as per the instructions, bound using my own dx8 1st gen transmitter, proceeded to check control throws; throttle(fine) elevator (fine) rudder((fine) aileron( it move but not by itself, it drags the rudder along with it( like they are mixed or something. Tried different things like swapping the servo wires on the receiver(nothing) checked the mixes on the transmitter, they are in INH, and still nothing, aileron stick input still moving the ailerons and rudder together, ran out of options. What can I do? Is that the way the controls on this airplane suppose to move straight out of the box? Is it a factory defect? Did I do something wrong? Been using my First gen dx8 for the longest with no issues so far, got over a dozen planes saved on it and they all work fine.

@danflom1271

Жыл бұрын

Aileron has rudder mixing in SAFE mode. It is done in the receiver. It should only be active in safe. AeroScout does the same thing.

Hi bro ...i've been following your channel for a long time and thanks to this video i bought apprentice 1.2 rtf. I have a problem that I do not understand and I cannot solve: even when I deactivate the SAFE and fly only in AS3X, if I push the engine to the maximum the plane starts to gain altitude and rears totally upwards, not allowing me a normal trajectory of the vehicle. I then bought a UMX timber x and associated it with the DXS that I had supplied with the apprentice and it does the same thing. I am desperate

@RedFuryIII

Жыл бұрын

As I recall, some RTF planes have a mix that when you head toward the higher end of throttle there some elevator input.

@skyeyes5053

Жыл бұрын

@@RedFuryIII I solved it by buying an NX8 😂😂😂 everything has changed for 2 months now ... I was reborn!thank you 😉!

Which is better for a first time beginner, apprentice 1.5 or 1.2 ?

@oliveranghaolongnyps6087

2 жыл бұрын

i think 1.2 cuz its smaller?

@MerryBoozerRC

Жыл бұрын

1.2 it’s honestly easier all around for a beginner

I BOUGH APPRENTICE S2 1.2 M COST $2081.44 GOT HOME NO BATTERY NO AC CHARGER NODC CHARGER . WHATS UP

Not really a RTF. It does not include the battery.

BIGGEST PIECE OF CRAP AND I PAID $281