Apply Stencils To Nike AF1s- Applying Stencils to Leather Shoes
Тәжірибелік нұсқаулар және стиль
CHECK OUT THE NEW VIDEO FOR HAND PAINTING WITH STENCILS: • Stencils on Nikes- Han...
Scroll down to see the Materials and Links I used
How to apply stencils to your Nike AF1s
Questions about Transfer Paper? Check out this video for more information on Transfer Paper: • Stencils and Transfer ...
Links below are affiliate links. Thanks for helping to keep me in business!
Disclaimer: I am not a sponsored artist, but I do have links that are made available to everyone to make a small commission if you click them.
Angelus Paint: www.angelusdirect.com/HJ
BEST PAINT IN MY OPINION- Check out the video I did to see why I think it's the best!
Liquid Kicks Topcoat: rb.gy/g6e1fw
BEST TOPCOAT IN MY OPINION- Check out the video I did to see why I think it's the best!
Disclaimer: I am not a sponsored artist, but I do have links that are made available to everyone to make a small commission if you click them.
CUSTOMS/CLEANING SUPPLIES:
TRANSFER PAPER (my fav, yes this brand works!): amzn.to/3rXArWR
TRANSFER TAPE: amzn.to/3QlMPKr
VINYL SMALLER ROLL: amzn.to/3rZaVAy
VINYL LARGE ROLL (this roll should last around 1+ years if you are doing stencils for yourself): amzn.to/44RL24q
PAINT: Angelus Paint: www.angelusdirect.com/HJ
TOPCOAT: Liquid Kicks Topcoat: rb.gy/g6e1fw
SHOE CLEANER: Reshoevn8r- USE CODE " FF10" for 10% off- bit.ly/3WEiaIi
LACES: LitLaces- USE CODE "FF" www.litlaces.com/?ref=FF
VIDEOS TO CONSIDER WATCHING NEXT:
BEST TOPCOAT VIDEO: • Best Topcoat for Custo...
BEST TOPCOAT VIDEO-EXTENDED 25+ MINUTES: • Angelus Vs Alphaflex V...
BEST PAINT BRAND: • Most Durable Paints fo...
HOW TO PUT STENCILS ON SHOES: • Apply Stencils To Nike...
Custom Footwear/Apparel/Stencils: www.etsy.com/shop/HJartistry
Stencils: www.etsy.com/shop/HJartistry
Etsy Shop: www.etsy.com/shop/HJartistry
Supplies for Customs: www.amazon.com/shop/footwearf...
T-Shirts Etc: www.teepublic.com/user/hjarti...
Social Media:
Instagram: / hjartistrydesigns
Facebook: / hjartistry
Twitter: / hjartistry
#Customshoes #Paintedshoes #angelusdirect
Пікірлер: 252
Your amazing, and thank you for all your help your stencils I purchased are awesome I followed this exact video for my first time and thanks to you my sneakers came out amazing
@HJartistry
7 ай бұрын
Thanks so much for the kind words! Great job on the customs! Appreciate you sharing the photos and thankful for your support! 💯💯💯
Another great video. Keep up the great work HJ!!!
@HJartistry
4 жыл бұрын
Thanks Dragon! 💯 💯 Appreciate the support!
i must say u impressed me lil note u wrote just shows u care about ur customers u have a customer for life thank you and i will refer to everyone
@HJartistry
2 жыл бұрын
Awww thank you so much! Awesome clients like you help me so much. Thanks a ton for your support! Feel free to tag me on IG etc with your work. Love to see!
Thanks just ordered. Thank you for the tips!
@HJartistry
Жыл бұрын
Thanks so much! I’ll ship it out shortly 💯💯
Love your work is master lovely
@HJartistry
Жыл бұрын
Thanks for the support! Really appreciate it
Great, helpful, and informative video!
@HJartistry
4 жыл бұрын
Thanks Gabriel! Feel free to let me know what you'd like to see next! Always glad to help out other people.
1 of the better videos, thanks
@HJartistry
3 жыл бұрын
Appreciate it greatly 😊
Just ordered some stencils! Most informative video! Thank you!
@HJartistry
2 жыл бұрын
Awesome! Thanks for the support! I’ll ship out your order shortly!
@natashamcdaniel2281
Жыл бұрын
Where do I order
Awesome tutorial!!!!!
@HJartistry
3 жыл бұрын
Thanks so much! Appreciate the support.
This was so dope!!!!!
@HJartistry
3 жыл бұрын
Thank you! Glad to hear it :)
those came out awesome !!
@HJartistry
3 жыл бұрын
Thanks so much! I hope to do a new tutorial video of how to customize AF1s using just stencils and a paintbrush (instead of an airbrush) soon.
New to customising and love your videos, they've been really helpful :)
@HJartistry
3 жыл бұрын
Awww Thanks so much! Glad to hear it! And I hope you keep on customizing and have much success! 💯
Is amazing
@HJartistry
Жыл бұрын
Appreciate it
right to the point with useful info without any bullsht fluff!
@HJartistry
3 жыл бұрын
Thanks! Trying to do more videos that are straight to the point. Totally hate it when people beat around the bush just to get more watch hours 😂🤦🏻♀️
@geekbro6265
3 жыл бұрын
@@HJartistry absolutely it’s hella annoying when you need some info and you got to sit through 10 minutes of saying a lot of nothing for 30 seconds of useful info, you definitely deserve more views than them sneaker head bros that waste time on nonsense
@HJartistry
3 жыл бұрын
@@geekbro6265 aww thanks! Really appreciate it! I'll Def have to do more straight to the point videos soo. Thanks for the support 🙏 💯
Great video!
@HJartistry
2 жыл бұрын
Thanks so much!
THIS IS SO COOL OMG
@HJartistry
3 жыл бұрын
Haha thanks! 💜
This looks amazing
@HJartistry
10 ай бұрын
Thanks so much! Really appreciate it! 😊 🙏
I'm new to this just wanted to do this. U make it look Eazy
@HJartistry
Жыл бұрын
Aww thanks! Just practice a bit on older shoes first. It isn’t always as easy as it looks. But it is fun 😊
I’ve never thought about using masking tape to take the fuzz off I just tried it on a pair and they came out way cleaner thank youu
@HJartistry
3 жыл бұрын
Yayyy! Glad it helped. I usually try to do a damp paper towel, then a microfiber Towel, and then the masking tape cause cotton fuzz on shoes is lousy. Feel free to tag me on the shoes you did on youtube... Or if you have Instagram or Facebook. I would love to see! My ig is @hjartistrydesigns or fb is @hjartistry
Cool looking Shoes!
@HJartistry
2 жыл бұрын
Thanks so much! Appreciate it!!!
okay, now I'm motivated enough to pick up my paints, keep the good work up
@HJartistry
Жыл бұрын
Yesss! Do it! Thanks for the encouragement as well!
@WILFRIED_STUDUO
9 ай бұрын
bb
Looks dope
@HJartistry
3 жыл бұрын
Thanks so much! Appreciate it 🙏
I bought stensles and they are very good I recommend
@HJartistry
3 жыл бұрын
Thanks so much! Glad they were helpful 🙏 😊
Thank you so much.
@HJartistry
2 жыл бұрын
No problem! Happy Creating!
Woow 🫶🏻 new follower from Mexico 🫶🏻✌🏻
@HJartistry
Жыл бұрын
Appreciate you! Greetings from Pennsylvania! 🇺🇸💙🇲🇽
Would you be able to show how you did the transfer tape part as its hard to see when its sped up? Thank you!
@HJartistry
4 жыл бұрын
Check out this video. kzread.info/dash/bejne/c2xntLildtTIdJs.html it goes in more detail with transfer paper
This needs way more likes and views, Can you please make a video on applying off white stencils to a Jordan one
@HJartistry
3 жыл бұрын
Thanks for the support. I personally don't do off white stencils (my stencil cutter has a heart attack when I try) but it would be the same way as applying any type of stencil.
Nice thank you 🙏
@HJartistry
2 жыл бұрын
No problem! Thanks for the support!
Can you do a video on how to sponge paint
Thank you, my paint kept going under the stencil and sticking to my stencil while removing it. I just ordered an air brush. Also a few more questions 1. How long do you wait to paint between layers? 2. Do you need to thin out Angelus paints to use on airbrush? Thanks
@HJartistry
3 жыл бұрын
1. You need to wait until it dries---so it could be just 15-30 seconds if you use a hair dryer/heat gun/embosser to speed up the drying time. Just remember to use very light layers too. 2. I only use a little bit of 2-thin when using angelus paints. My paasche vl seems to do really well---sometimes I don't even thin it out. In general though, you should use 2 thin to thin out the paints. Another suggestion is to actually strain your paints. Sometimes paints get globs in them and clog your airbrush. Hopefully that helps, sorry for the late reply
I like to now
Those are hot!
@HJartistry
27 күн бұрын
Thanks so much! Let me know if you try this on your pair!! 🙏
Omggg Pleaseeee Show Me I Would Love Too Get Into This PLEASEEEE
Ma per finire non dai un prodotto per coprire la tinta dalle intemperie e abrasioni ?? Grazie
I would really love to do this kind of design as my work how can you help me ❤❤❤
Can you do an air brush set up or tutorial on how to air brush properly?
@HJartistry
3 жыл бұрын
Sure!! I have done some other videos using an airbrush but I can do one specifically on airbrushing in the future.
Heyy wanted to ask what air brush you use to colour it? Also Love the work keep it up❤️
@HJartistry
3 жыл бұрын
Thanks so much. Here is list of the items (including the airbrush that I use): www.hjartistry.com/supplies-for-customizing I really like my paasche vl airbrush. But if you check out Amazon, most airbrushes, like paasche, iwata, badger, grex etc are good options. And if you don't like the airbrush you get on Amazon, sometimes you can return it. Good luck and thanks for your support 🙌
How can I buy that lv sticker
how much i need to order the complet materials please
I need a idea for Alweather in graftti
Subbed! You did your thing here. Very straight forward and to the point. The shoes look great . I’m into customizing and htv and haven’t done shoes yet with HTV or HTP so if I lay the stenciled paper to the shoe it will stick it won’t move ?
@HJartistry
3 жыл бұрын
Appreciate the support. The vinyl stencils should not move when applied correctly. Just remember that unlike HTV, vinyl stencils are meant to be removed after painting. But as long as the surface is clean and doesn't have too many ridges it wont move. If you are going over the nike sign and side panels with a stencil it will be more difficult to have the stencil stick and not have overspray...so normally I recommend if you use stencils make sure the shoe you are working on doesn't have too many ridges/stitches etc. Hopefully that helps :) Let me know if you have any other questions. Thanks!
@bronxnative2087
3 жыл бұрын
No problem . thank you for the swift reply ! Ah I get it now .👌🏾 thanks HJ much appreciated and definitely will
@HJartistry
3 жыл бұрын
@@bronxnative2087 sure thing! Happy creating! 🎨 🖌
@haleybby23
2 жыл бұрын
@@HJartistry I have a follow up question. If the stencil is coming up kinda, can I use like the top coat as a base coat to get the stencils to lay down & be sealed?
@HJartistry
2 жыл бұрын
@@haleybby23 I would never recommend leaving the stencil on the shoe permanently. I only recommend using the stencil as a guide, then painting, and then removing the stencil.
Hello, I was trying to order the stencils off your site. I read that you ship to Canada but I couldn't proceed with the order because it kept on asking me to enter a state. I live in Ontario. Please let me know how I can proceed with the order. Thanks.
great video! just wondering where did you get your custom hang tags made? i’m looking to get some done for my custom shoe page also :)
@HJartistry
3 жыл бұрын
Thanks! I got them from @dnicecustoms and I also got stickers from Sticker Mule... But @dnicecustoms does sticker too (I believe 🤔)
@jrmk2000
3 жыл бұрын
@@HJartistry thank you so much!😁
@HJartistry
3 жыл бұрын
@@jrmk2000 no problem! Enjoy your Thanksgiving 🦃 🎉
Do you have a video showing how to apply sealer
@HJartistry
3 жыл бұрын
I might have one on one of my Nikes/Jordans/Vans videos. But normally I use Angelus matte finished and hand paint it on (make sure the paintbrush is brand new). Or I use LK finisher in Matte or Factory Finish and airbrush it on. I'll have to do a full video tutorial in the future with it. Thanks for asking. Let me know if you have any other questions 👍
Waooow
@HJartistry
Жыл бұрын
Thanks for the support!
lovely, whats the name of the finisher used
@HJartistry
Жыл бұрын
Sorry for the late reply. I use LK finisher- I actually just did a comparison video on the different topcoats. Here is the link to LK: rb.gy/g6e1fw
Do you also do customer shoes? If so what is the pricing and information!! Your work is 😊
@HJartistry
3 жыл бұрын
At this time I am not able to do customer shoes. But I am doing a collab video with @kicksbyemma and she should have some openings. Feel free to check her out on IG 👍
Did you add Duller to the 2-soft and paint when airbrushing? Thanks
@HJartistry
3 жыл бұрын
Nope, I don't add duller or 2-soft to the paint. I only add a small amount of 2-thin when airbrushing. 2 soft (Also known as gac 900) is for fabrics/canvas so I didn't use any. Also, Instead of the duller I use a matte finisher at the end when I am finished (since sometimes too much Duller makes the paint too chalky) Hope that helps! Let me know if you have any other questions.
What vinyl is she using?
Hello, I am a girl who is starting in the world of sneakers. Please, would you be so kind as to tell me what kind of vinyl do I have to buy to make painting stencils?
Great video! 🎨 What type of vinyl do you use? I'm looking for a place to have this type of stencil made for me in my country, but I can't find anything because they don't know what type of vinyl it is, a copy shop recommended textile vinyl to me but I don't think that it will work with the heat of the dryer 😅 thanks ♥️
@andreagamar2387
3 жыл бұрын
@@HJartistry thank you so much! 🥰
@HJartistry
3 жыл бұрын
@@andreagamar2387 no problem. I hope you can find some good vinyl. I usually just get mine off of Amazon. Best of luck! 🤞🏼 😊
I have a question if you use an air brush how do you set it up like is there another machine that u connect the air brush cause when ppl use it I see a black wire and the air brush I want comes with no wire just the brush and few other things pls respond
@HJartistry
3 жыл бұрын
Hi, so I use a badger air compressor and then I have a hose with a moisture trap that connects to my airbrush (a paasche vl airbrush). I will have to make a video to show you what I use. Stay tuned... Hopefully in the next few weeks I'll do the video. I purchased my air compressor at Michaels (with a 50% off coupon 😉).
Hey I was just wondering how you the stencils would stick on without transfer paper is that possible
@HJartistry
3 жыл бұрын
Hi yes it is possible to not use transfer paper. You would just carefully remove the stencil with a weeder or exacto knife or possibly even your fingernails and place the stencil on your shoe. Personally I find that using transfer paper makes it much easier but it is possible to apply your stencils without transfer paper
Do you know what kind of machine I would need to buy, to make full color heat transfers for my AF1
@HJartistry
3 жыл бұрын
I am not too sure what you would need to make full heat color transfers but I personally have a cameo 3 for stencils
the masking tape to remove excess cotton is genius why the heck didn’t i think of that??
@HJartistry
4 жыл бұрын
Thanks chica! It took me a while to do it too 😂 😂 I used a vacuum cleaner attachment at first... But the masking tape is much easier 👍
after placing the stickers on the shoe, do you go over it with a hair dryer or heat gun?
@HJartistry
3 жыл бұрын
Yes I go over the stencil with a heat gun(to help it adhere better to the shoe) then I use paint and use the heat again to make sure the paint is dry. Once the paint is dry the you can remove the stencils 👍
Hey how do you make the stencil stay still and flush against the swoosh if doing a bleeding swoosh reusable stencil with a brush
@HJartistry
Жыл бұрын
Well I personally have not done a reusable stencils before but I would think that maybe if you would get some good masking tape and tape the stencils up against the shoe it could help.
Hi I want to buy a stencils with my sneakers the ones that you just did the LV I like the way you get them sneakers I want to do math like that
@HJartistry
3 жыл бұрын
Sure thing. I am taking a bit of a break for my orders right now for the holidays but if you'd like to shoot me a message on my website HJartistry.com or DM me on Instagram @hjartistrydesigns I can help you out.
Can you just put the lv stencils on the shoe like that without putting the transfer tape on the stencil ?
@HJartistry
3 жыл бұрын
Yes. For some stencil designs you would not need transfer paper. Transfer paper makes it easier, but for some designs it isn't necessary.
hey do u customise air jordan ones? i have a black one but I need this red supreme logo design? how much is it if.u do
@HJartistry
3 жыл бұрын
Hi, thanks for reaching out. Right now I am not doing new orders for custom shoes. I can do stencils with the Supreme wording of you'd like. Feel free to contact me thru my website at HJartistry.com if you'd like
Really cool. What type of stencil material are you using?
@HJartistry
Жыл бұрын
Oracal 651 but some people like 631 or I think Dillon dejesus uses 811 and says that one is the best. Prob try out a few to see which one works best for you and the material you are using it on
@natashamcdaniel2281
Жыл бұрын
Just ordered thanks so much for the tips
How can I get custom stencils other than the ones on your website?
@HJartistry
3 жыл бұрын
If you'd like to email me with a high resolution photo of what you'd like, I can see if I can do it. Click the contact button on my website and I'll send you my email... Or click on my email on my IG @hjartistrydesigns
What kind of air brush and paint do you use ?
@HJartistry
3 жыл бұрын
I use a Paasche VL. I have used iwatas before, but I find the needle to be too delicate and bends too easily. So the Paasche VL seems to do the trick (and I have a badger compressor.)
How do u get the stencils to stick before u tape up the parts your not painting ?
@HJartistry
3 жыл бұрын
The stencils are a vinyl adhesive stencil... So they stick. As long as you prep properly. They are not a mylar (not sticky) reusable stencil. They are just a one time use stencil. Hope That makes sense. Let me know if you have any other questions
Where do you order your fabric from
@HJartistry
Жыл бұрын
Hi, not sure I understand. I don’t use fabrics. I paint the shoes.
Hi, what type of paasche VL airbrush and compressor do you recommend?
@HJartistry
3 жыл бұрын
Here is a link with the paasche vl I recommend... Totally up to you tho. www.hjartistry.com/supplies-for-customizing And I bought a badger compressor at Michaels using my 50% off coupon 😊 sometimes you can use coupons at Michaels on iwata neo airbrushes and compressors. I did have to purchase an adapter for the hose to the paasche gun.
@cayknows
3 жыл бұрын
Thank you soo much!
do you do custom stencils? im looking for a specific logo stencil
@HJartistry
2 жыл бұрын
I can do most. Feel free to check out my website. Thanks
You’re demo is beter than most of the shoes I’ve seen. Can I send you a shoe to customize ?
@HJartistry
Жыл бұрын
Aww thanks for the support. Unfortunately at this time I am not able to do any customs, but check out my other page on Instagram @footwearfashionista. I feature a lot of other incredible artists who might be able to help you out.
@gaatjeniksaan915
Жыл бұрын
@@HJartistry thank you ! I definitely will
Does the paint cracked when the shoe chreases
@HJartistry
2 жыл бұрын
It should not crack when prepped and sealed properly with leather paints/sealers. But over time the paint can fade on the toe box areas (or where the shoes naturally crease). I personally recommend to my clients to only have the nike swooshes painted, for more durable customs since the nike swooshes on the sides should be safe from the natural creases of the af1s.
Where do u get ur paint or what paint fit leather shoe and what is the name of your paint call by the way
@HJartistry
2 жыл бұрын
Hi, sure I have the paints linked in the caption. Angelus and Alphaflex are good options. Good luck! Let me know if you have any other questions.
@hmoobtsihlubhmoobvwj1807
2 жыл бұрын
Can u share me link thank
Is acetone for shoes? or the nail acetone we know?
@HJartistry
3 жыл бұрын
Either one will work. Just make sure if you use nail polish remover, it does include acetone... So the acetone will remove the factory finish on leather shoes and make it so they can then be painted 👍
How bout infusible ink on af1
@HJartistry
3 жыл бұрын
Not sure if you mean invisible ink? There is heat changing paints, but I haven't used them before :(
Where to buy purchase your stencils
@HJartistry
Жыл бұрын
Hi they are linked in the caption or at HJartistry.com
what size stencils are you using?
@HJartistry
3 жыл бұрын
The exact measurements are on my website. And Hope you can find a good shop in Australia to help you out 👍
What kind of red?
@HJartistry
Жыл бұрын
The color of paint? I used Angelus fire red I believe. But Angelus red is dope too. Fire red paint is brighter and their red is a little more dull.
What kind of paint do you use? I'm not familiar with paint names,you may have said it Thank you
@HJartistry
2 жыл бұрын
Hi, sure I have the paints linked in the caption. Angelus and Alphaflex are good options. Good luck! Let me know if you have any other questions.
Can't find your stencils...can u help me out
@HJartistry
7 ай бұрын
Hey sure thing! You can check out my Etsy shop at HJartistry.Etsy.com and you are welcome to message me thru their and I can help you out. Thanks!
a gucci stencil on air force 1s
@HJartistry
3 жыл бұрын
Good idea! If you provide the shoes, I'll do it 👍
What’s the website to purchase stencils
@HJartistry
2 жыл бұрын
It is Hjartistry.com
Can you share the sizes of your stencil
@HJartistry
3 жыл бұрын
Sure! They are listed on my shop HJartistry.com.
What type of stencil is this
@HJartistry
Жыл бұрын
I use oracal 651 but I hear 831 or cricut brand is good too. Just test out to see what works best for your needs.
When will stencils be back in stock?
@HJartistry
2 жыл бұрын
Prob near the end of the month or if you would like you can request a back in stock notification on my website to get an email automatically sent when they are back in stock. Thanks for your patience. Feel free to let me know if you have any other questions
where do i buy
@HJartistry
Жыл бұрын
For the stencils they are on HJartistry.Com/stencils
Where do I find lv stencils
@HJartistry
3 жыл бұрын
I have been on vacation for the holidays but they will be on my website this Thursday or before. You are welcome to subscribe to my website to be notified when they are up... Or if you want to DM me on my Instagram @hjartistrydesigns we can chat. Thanks. Let me know if you have any other questions
Love the video, but you skipped the part on how to put it on the transfer paper.
@HJartistry
10 ай бұрын
Yeah should have went into more details on the video but hopefully this video here: kzread.info/dash/bejne/c2xntLildtTIdJs.html Can explain it a bit better! Let me know what you think. Always glad to hear honest feedback!
I've a question. Is it washable?
@HJartistry
Жыл бұрын
Great question! Short answer is yes you can wash them! Long answer is you can watch my video on cleaning custom shoes. Cleaning Custom Nike Shoes- Cleaning Nike Air Force 1 Customs kzread.info/dash/bejne/qZaqz9xtabnUl9o.html As long as the shoes were prepped, painted, and sealed properly, you can clean them. Using a scrub brush and cleaner is recommended but not putting them in a washing machine.
What size is the stencil that you used?
@HJartistry
2 жыл бұрын
The dimensions are on my website. I can't remember of hand. Unfortunately I am not selling stencils right now since I am on maternity leave. But if you have any other questions feel free to contact me on my website or my ig at @hjartistrydesigns
Where you get the stencil from
@HJartistry
3 жыл бұрын
On my website at HJartistry.com 👍
I don’t like red but her skills are On point
@HJartistry
3 жыл бұрын
Thanks so much! Really appreciate the support! Gotta get the client red tho... I am more of a blue fan myself 😂 💙💙💙
What did u say about the finisher ? Which one did u use
@HJartistry
Жыл бұрын
I am using Liquid Kicks finisher (LK finisher) and the factory finisher is my fav since it’s a similar sheen to af1s already. Liquid Kicks Topcoat: rb.gy/g6e1fw I did a video a few months back comparing different finishers and was super surprised how good the Lk holds up. It’s more expensive but the scratch resistance is crazy!! I usually wait until they have sales tho since it’s a bit pricey…4th of July they’ll prob have one if you don’t mind waiting
@urgentemail8690
Жыл бұрын
@HJartistry thank u. How do u do the laces gold and silver like you have in your link pls.your works insane man
@HJartistry
Жыл бұрын
Oh those are prob from www.litlaces.com/?ref=HaVBPVkFAHWQq And if you use the coupon code FF you can get 10% off. But you’d have to order 1 gold and 1 silver. Some other brands sell them too but most are pretty similar. Personally I don’t like wearing the leather laces tho…not as comfortable, but they do look nice. Thanks for the support!!
@urgentemail8690
Жыл бұрын
@@HJartistry thank u. U should do a video on how to make them laces
what is your website to order stencils
@HJartistry
2 жыл бұрын
Sure it is linked in the caption or at Hjartistry.com
can u use acetone thats used on nails?
@HJartistry
3 жыл бұрын
Yes. You can use nail polish remover as long as it says acetone in the ingredients. I personally use Angelus Deglazer... Or if I run out I use acetone from Sally beauty supplies (beauty store) or I use acetone from Lowes/home depot. When you use acetone (in any form) I do recommend going outside or having your window open and a fan blowing the air outside... Since it isn't very healthy to be around the fumes.
@caitlynhocson6166
3 жыл бұрын
HJartistry great thank you! Also for your stencils how big are each design? And how long till I get it if I order because I’m planning on ordering some from you.
@HJartistry
3 жыл бұрын
@@caitlynhocson6166 no problem. Happy to help. The current ones I have are on a 6 inch by 6 inch sheets. It's a standard size (compared to the Normal LV design). Other designs are on a 6x10" sheet. Currently I am limited on designs but current designs are available at HJartistry.com/stencils. It takes about 7-10 business days from the date you ordered. Possibly sooner but it depends on what state/country you are in. Shipping closest to Pennsylvania takes less time. West coast is a bit longer and shipping to Canada takes the longest... About 10-15 business days.
How long do you leave the stencils before removing them?
@HJartistry
3 жыл бұрын
I personally wait until the paint is fully dried. So it depends...Using a hair drying or heat gun/Embosser speeds the drying process and helps the stencils peel up a bit easier. Normally it is about 30 seconds to 3 minutes when using a hair dryer... Or 1-6+ hrs if you let it air dry before removing the stencils.
Im from europe,can i order these stickers?
@HJartistry
Жыл бұрын
Unfortunately I don’t ship to Europe. But check out shopone15.com or maybe see if Etsy has any stencil artists in your country. Just double check the reviews to make sure the seller is reputable. Hope that helps! Thanks for reaching out and hope this video was helpful!
@sfkgnk2289
Жыл бұрын
@@HJartistry aha ok thanks
Is it acrylic paint?
@HJartistry
3 жыл бұрын
It's a leather paint. My website has a link to what supplies I use if you are interested. I personally like angelus or Jacquard the best... But there are other brands
do you ship your stencils overseas?
@HJartistry
2 жыл бұрын
Unfortunately due to shipping issues and higher taxes/tariffs, I do not at this time. But I would recommend going to Etsy and seeing if There is any stencil artists closer to you. Also check out their reviews on Etsy to ensure you get good quality stencils. Hope that helps, thanks for your interest. And happy creating!!
huh but i didn't see you remove the transfer paper from the stencils before painting it?
@HJartistry
4 жыл бұрын
Check out this video. kzread.info/dash/bejne/c2xntLildtTIdJs.html it goes in more detail with transfer paper
@HJartistry
4 жыл бұрын
It's sped up but from 1:30-2:20 I am removing the transfer paper from the stencils, after that stencils are on the shoes. Transfer paper is usually clear so it is harder to see. Ideally check out the link kzread.info/dash/bejne/c2xntLildtTIdJs.html for more details on transfer paper
Where is the website
@HJartistry
Жыл бұрын
Links in the description or on my website at : www.hjartistry.com/stencils
Where are the stencils from?
@HJartistry
3 жыл бұрын
From my Website. Linked in the caption 👍
What name of website
@HJartistry
2 жыл бұрын
HJartistry.com it’s linked in the caption too 👍😊