"silently copies brake set up" lol Thanks for the info very informative.

@phelpsgarage4202

6 ай бұрын

Thank you for watching

Look forward to your track feedback! 💪

I have AP Racing brakes on my Mustang and love them. You will enjoy swapping your pads way less and rotors every other year. Your channel is making a GR86 super tempting

@phelpsgarage4202

5 ай бұрын

Thank you for watching!! I love the AP racing brakes! They perform too good

I just started watching your videos but I appreciate how thorough you are. Good work!!!

@phelpsgarage4202

6 ай бұрын

Thanks for watching!

Ill say it again. Best racer/enthusiast gr86 channel period. You need sponsors man. Inofrmative vid per usual. Im looking to uograde to a bbk kit mid summer. What model of Ryobi impact is that? It had torque settings on it?

@phelpsgarage4202

6 ай бұрын

Thank you!! A sponsor or a ton of KZread money 🤣😅 it’s the big brushless ONE+ HP 18v one. It’s has 3 different settings or an auto mode. It’s pretty powerful

@PBrooksSawyer

6 ай бұрын

@@phelpsgarage4202 ha ha well fair. KZread money works be best. You'll get there

@phelpsgarage4202

6 ай бұрын

@@PBrooksSawyer I hope so!!! 🙏🏻

@876yuugt

6 ай бұрын

100%

@PBrooksSawyer

3 ай бұрын

Ok revisiting. There is a good deal for a FRONT kit on FB marketplace. He's bundling in front and rear ferodo pads. How is this setup holding up? I'm about to pull the trigger.

Very informative video thanks

@phelpsgarage4202

6 ай бұрын

Thank you!

Looks awesome man! Can’t wait to hear your track impressions on it!!

@phelpsgarage4202

6 ай бұрын

I’ll keep you posted next time I go!

Good stuff man! Keep it up 😎

@phelpsgarage4202

6 ай бұрын

Thank you!

Them brakes are so 🔥🔥🔥. With these new brakes you going to have to hit them at the last cone lol

@phelpsgarage4202

6 ай бұрын

I’m gonna hit them at the Apex now

It will be a nice improvement for sure 🚗💥💨🔥

@phelpsgarage4202

6 ай бұрын

I’m excited

Bleed the brakes as soon as you install the new parts as air can creep up into the ABS module if it sits for a long time. Its a pain in the ass to get the air out of the ABS as the ports inside the module are only able to be bled when the ABS pump is active. You need a scan tool to activate the ABS with the car sitting still.

@phelpsgarage4202

6 ай бұрын

Got it! Thanks for the input!

That’s sweet! They really do fill out the wheel. Have you decided if you’re going turbo or supercharger yet? I’m leaning towards the Sprintex kit.

@phelpsgarage4202

6 ай бұрын

Turbo

5.1k. You gotta be shitting me. I wish I was rich enough to afford that lol.

@phelpsgarage4202

6 ай бұрын

4.5k but prices are going up so now’s the best time to buy

@L86END

6 ай бұрын

@@phelpsgarage4202 I just got new rotors cuz I got heat cracks along with some decent brake pads. I'm gonna have to stay stock til I can track more. I get my FA 510s today! I'm excited to finally do something big to the car

Hey Man, thanks for all the great contents. I enjoy watching you track your car. I recently bought a GR86, in your opinion what is the best wheel spec and tire to run if i do not want to use spacers or roll the fenders. Current camber level around -2, -2

@phelpsgarage4202

6 ай бұрын

Probably 18x9 et42

@patrickhingston

6 ай бұрын

@@phelpsgarage4202 thanks for the reply. I was leaning towards 17×9 before your advice. In your opinion, why 18×9 instead of 17×9. I plan on doing SCCA time trials running sport 4.

@phelpsgarage4202

6 ай бұрын

@@patrickhingston I few things but tires and sizes along with looks and feel when on track. 17 will be lighter and cost less.

Are you planning to upgrade rears accordingly or installing a brake pressure regulator between fronts and rears calipers, also?

@phelpsgarage4202

6 ай бұрын

Nope, just matching the rear pads correctly with the front for now.

Great set-up. I know Essex had their stuff with $1000 off. I have been using the Hawks DTC-60 with the Castro fluid and stock lines, it works great for me, I don't glow the rotors at all. Then I go home after each race and switch back to the stock pads. I have been tempted with the Essex kit but I also use wildwood on other platform and it is appealing for their price. I haven't checked if Wildwood has a kit for our cars yet(GR86). I can't wait to get some feedback from you regarding the AP kit, I think you are the first one to review them. I wanted to ask you, what is the plan for power? I have seen some turbokits out there and also superchargers like the HKS but again, not many reviews. Only shorts videos from the people that made the turbokits but not a lot from the actual owners.

@phelpsgarage4202

6 ай бұрын

I’ll keep you posted. I have the turbo kit being made and I’ll start tracking it with on low boost. Looking for another 100 whp for now.

@rs3tuber425

6 ай бұрын

@@phelpsgarage4202 I love your channel brother but I like the fact that you actually answer people. Any recommendations on 200TW tires? I am currently on Potenza RE-71RS but they are pricey and I need to replace them. I tried the Falkens R/T 615s which I think they are great for the price. I also tried the Federals 595s and I am trying to decide now between the Falkens RT 660 or the Kumho V730s. What do you recommend? My local road course has very tight turns.

@phelpsgarage4202

6 ай бұрын

@@rs3tuber425 I love the RE71RS but if I wasn’t using them I would have RT660 for overall track time. The RT660 likes a lot more camber over the RE71RS. The RT615 are slow compared to the other ones.

Good video bro, we produce LEDs for auto? Any plan to do LED upgrade with one of your collection vehicle?We would love to collaborate with you.

@phelpsgarage4202

6 ай бұрын

Message me on IG

Once the brakes have fluid and are bedded in, won’t the loaded pistons keep the pads from rattling? Talking about the “anti rattle” in specific

@phelpsgarage4202

6 ай бұрын

You would like to believe so, but no

The moment you go off into gravel or get a rogue obstacle like a rock stuck in between the caliper and barrel, it could be less than ideal of a result.

@phelpsgarage4202

6 ай бұрын

That would suck if it happened

@nodrogkam

6 ай бұрын

@@phelpsgarage4202 seen it a lot on the west coast. Scored rims (sometimes to a point where it’s dangerous). My personal minimum would be 10mm of clearance.

Very very intrigued on how to bed in the pads/rotors with everything outside the car. How did you do that?

@phelpsgarage4202

2 ай бұрын

It was done on a brake dyno at Essex

@alejandrocolon6513

2 ай бұрын

@@phelpsgarage4202 It was too good to be diy haha. Loving the build!

For science can you see if your 17in APEX wheels clears with or without your 7mm spacer? I have a set of 17in VS-5RS and APEX claims their barrels are extra big

@phelpsgarage4202

6 ай бұрын

Of course I’ll probably do a video with all of my wheels

Faster? Boosting?

@phelpsgarage4202

6 ай бұрын

😎

you think this fits 17 inch wheels like gramlights

@phelpsgarage4202

2 ай бұрын

I’m not sure because it doesn’t fit my Apex wheels that are in a 17

Could you tell me the model number for this BBK setup

@phelpsgarage4202

2 ай бұрын

CP9660