If you want to buy an Anycubic photon m3 plus resin 3d printer : amzn.to/3FgXij7 please use my link from Amazon to give a small kickback to the channel at no extra cost to you.

@mrhj626

2 жыл бұрын

I just stumbled across this video by chance and I've a sonic mighty 4k as well. I've got it 11 months and it just died as well. 2 weeks before the warranty expires. the led screen I have 2 months packed in and the led array has a dead area on it or a square area isn't lighting up. I'm currently onto the manufacturer about this issue to see what if anything can be done. i mean a 600 euro machine should last longer than one year in fairness. one thing about resin machines is they last so long then its a door stop and almost as much to repair or buy a new one. the m3 screens are abit cheaper also. only thing is the fep modules need to have the frames replaced so its a straight buy from the anycubic shop or anywhere that has them.

Please keep posting about this machine, you have helped me so much in just two videos.

I’m so glad you made this video. I already have an anycubic Chiron 3D printer, and I was thinking of getting this resin printer. I think I’m gonna try it now!

@Groundeffected

2 жыл бұрын

So far so good dude. And prints look great too. I’ll update if I ever have any issues.

Glad to see you got an Anycubic printer as well! Got my Photon Mono X 6K a few weeks ago and i'm still in the process of finding the best settings. Happy printing (and painting of course)!

@HomemadeJam3D

2 жыл бұрын

When you get the settings figured out can you share them with me?? Omg that printer is driving me nuts!! I have 9 resin printers and the mono X6k is the only one that has given me trouble. 🤣

@Groundeffected

2 жыл бұрын

I’m still working out some kinks but mostly it’s been a decent experience so far.

New follower here! love your videos your very funny and a awesome artist! keep on keeping on.

@Groundeffected

2 жыл бұрын

Thank you dude. Glad you like the videos man!! And hope to see you in the comments again in future!!

Great video! Keep up the good work

@Groundeffected

2 жыл бұрын

Thank you dude. Update video goes up today.

Great video can't wait to get one

@Groundeffected

2 жыл бұрын

Haha thanks my dude.

awesome! congrats!!!

@Groundeffected

2 жыл бұрын

Thanks dude.

I just ordered an m3 plus to go beside my mono 4k. I can't wait to see how it differs from the other!

@Groundeffected

Жыл бұрын

It’s a pretty decent machine.

Nice machine dude! Hope it serves you well

@Groundeffected

2 жыл бұрын

Thanks dude o hope it does too!!

I found you on TikTok and loved your work! Coming from someone that has been doing airbrush for years, your work is on point! Question, have you found a sweet spot for your printings? I keep getting fails left and right!

@Groundeffected

2 жыл бұрын

Hey you got to do the exposure setting then find support settings that work for you. I do everything manually and usually don’t trust pre supported files I have a few videos on this on the channel.

Good review. I'm considering buying the m3 but other videos are coming off more like advertisements/infomercials. One guy even threw in at the end "yeah by the way this isnt actually a review, anycibic sent me this printer so I could make this video." I realize the M3 and M3 plus aren't exactly the same thing, but certain features are the same, such as the textured build plate, which this video is the first I've come across to speak on the extra wasted resin, and is something I hadn't even considered. Great video.

@Groundeffected

2 жыл бұрын

The m3 and plus are two different machines. The plus has 6k screen the m3 is only 4k also size wise the plus is twice the size. And yea they didn’t give me anything. They won’t even reply to my emails and messages.

@TheLostFireWithin

2 жыл бұрын

I ended up getting an M3 since it was cheap $270 with free shipping from Amazon. Great build plate size and very quiet machine. I ended up having to mod mine a bit for my needs (seals around lid and hook handle on top), but genuinely surprised of what it prints out despite its advertised micron size. Only downfalls were the need for seals on the lid and the FEP on frame design. The FEP that Anycubic uses though appears to be decent and I don't really hear any of pops from FEP release. Get the M3 plus if you want a better machine, but M3 is a great budget option.

As someone who doesn't have a printer that's not in England , this is a great video and it makes me want one now.

@Groundeffected

2 жыл бұрын

Great just use link in the description 🫣

@hicontrast

2 жыл бұрын

@@Groundeffected what is a description? Oh you mean the descripsh

Nice! My screen protector saved my screen from a pinprick hole in my FEP. Totally worth it.

@Groundeffected

2 жыл бұрын

If you look at the printed model in the video the one that’s a larger one when I talk about the misty fep you can see the dust either blocked light on that pixel or I have a dead pixel but the dust man. I hate that dust.

your dust comment made laugh so hard. i probably replayed that point at least 20 times the specific part that had me was your Comment "I HATE DUST"after describing how it magically appeared. And therefore because I have watched a bunch of your other videos at this point. I truly know how why you really have a gripe with "dust"and well I couldn't agree with you more my room seems to be a dust factory it's a bit nutty. Honestly though with the kind painting you do and the resins work with your hatred of it is in my book absolutely dignified!.. I support your hatred my friend. I love you cause you are very talented, you are wealth of knowledge, and prob my favorite you have a great way of slipping in your phenomenally timed dry and just downright weird humor. I myself have a similar taste and talent for weird humor presented with dignity haha. you are good at being you and comfortable with your weirdness and I respect that unconditionally Sir! KEEP IT UP BRO!

@Groundeffected

2 жыл бұрын

Thank you so much dude. I appreciate these kinds of comments so much I was worried about putting myself on the internet. And especially since I’m painting little dollies essentially, but it’s been accepted fairly well so far. I can’t be more thankful!!

@Groundeffected

2 жыл бұрын

Ps dust can frik off I hate that stuff

Hi Brent, I also now have 2 Anycubic photon printers :) Mono X 4k and they are amazing, hope you enjoy your printer :)

@Groundeffected

2 жыл бұрын

Thank you. I’m sure I will, thanks for watching!!

Great video, Brent! Lol, I cracked up when you talked about the dust because it is absolutely a thing! 😆🤣 I also have the magic dust hahaha.

@Groundeffected

2 жыл бұрын

Lol I hate that dust. Where tf does it come from?

@HomemadeJam3D

2 жыл бұрын

@@Groundeffected hahaha I have no idea!! There has to be tiny little goblins that run around sprinkling this magic dust on everything we're working with 🤣

It already has a screen protector installed! That's why the black tape is there! It comes with one installed and another one to use for later.

@Groundeffected

Жыл бұрын

It’s been so long I’ve forgotten now haha

Love the videos man keep it up. I was wondering do you have any videos on printing hollows? Maybe I haven't been paying enough attention but I don't recall you filling any holes in your models. Do you print solid?

@Groundeffected

2 жыл бұрын

I am sure I have. There should be one in the printing playlist have a look or at least I’ve briefly gone over it.

@jjbeast102699

2 жыл бұрын

@@Groundeffected thanks for the reply. Also if you made a video on how to price your pieces that would be extremely helpful

Please post videos of prints with this machine,I want to know if this is what I'm looking for, I wanna be able to make figures like you do. But was also considering the m3 max but if this could get what I want done it would save me tons of money, Thanks in advance for any tips or advice.

@Groundeffected

2 жыл бұрын

This machine is the same size as my previous machine and all the stuff I’ve done has come off that machine so it’s capable of anything I’ve done in the past. But with higher resolution. I think the pixel density is better on the plus but the max is much bigger build size.

I’m glad you’re practicing safe printing. Always use protection(screen protector)

@Groundeffected

2 жыл бұрын

Hahaha damn that protector.

@Eduardo.Cordova

2 жыл бұрын

Isn't it supposed to already have a screen protector pre-installed? My Photo Mono X 6K did.

@daarionaharis3675

2 жыл бұрын

@@Eduardo.Cordova as seen in this video at 2:16, there is a "protective film" on the screen. This is just to protect the screen from scratches during shipping/unboxing. But some people leave it and use it as a screen protector. The actual screen protector doesn't come pre-installed.

@jimmyjames1807

Жыл бұрын

ive had a saturn nearly a year and ahalf, never needed a screen protector, use a little bit of water when puting that screen protector on

Are the lychee support settings the same with this new printer?

@Groundeffected

2 жыл бұрын

Didn’t change a thing about my support settings. And the supports are great.

Did you change the lcd screen on your Sonic Mighty? The screen is a consumable intended to be changed. I just got mine so I'm glad to know yours lasted a year. I had to change the one on my small printer every 4 to 6 months.

@Groundeffected

2 жыл бұрын

I didn’t yet. Sounds weird but I can’t afford to after buying the new machine but it was time to upgrade anyways as new machines are coming out with 6 and 8k resolutions with better pixel density. I will replace the screen as soon as I can and put her back into production line again!

Why didn’t you get the M3 Max? Mine arrives on Monday can’t wait coming from a saturn

@Groundeffected

2 жыл бұрын

I can’t afford it unfortunately

i would go with Anycubic photon as well . .and its 150ml tenacious to 1 litre of resin

@Groundeffected

2 жыл бұрын

Ye i just fill the bottle it’s close to 100-150 ml

I wonder what the difference makes in the prints between the clear fep and the frosted fep

@Groundeffected

2 жыл бұрын

It’s supposed to make the prints stick less to the fep

@NerdyCraftsmith

2 жыл бұрын

@@Groundeffected weird, I've never had a problem with that lol

@Groundeffected

2 жыл бұрын

@@NerdyCraftsmith neither have I but the entire community has a load of newbs who are struggling this makes it easier for them I guess

Hey man I just saw your vid on lychee and noticed that you're using the pro version. Is it worth it over the free version? The main thing that I wanna be able to do is to change the base of the supports to a tapered one for easier removal (I don't really use rafts). Another thing is to keep the holes I made as an object so I can just stick it back in after printing. This can be done in chitubox but I like the interface of lychee much much better. And also what's the main difference with the hollowing modes in the pro version?

@Groundeffected

2 жыл бұрын

Nah lychee doesn’t offer to keep the holes. And I’m not sure about the bases of supports but you do have a lot of control over them in the pro version. I just got pro because it’s my preferred slicer and it don’t cost much

@monzter221

2 жыл бұрын

@@Groundeffected Thanks for replying! I kinda found a way to "keep" the holes. In the library option on lychee, there's a cylinder/cube and I made it so that it's the same size as the hole. Printed it with supports and voila it fits perfectly haha

Dust and cat hair is my issue, and the cats don't go in the garage..lol Also, my FEP has major static cling. I use blue tape to collect the dust.

@Groundeffected

2 жыл бұрын

Man that dust is honestly the worst thing ever!!

Não está usando o reservatório de resina?

@Groundeffected

11 ай бұрын

It doesn’t work

dry fit the screen protector with masking tape it well all ways line up then just guide it

@Groundeffected

2 жыл бұрын

Yea but the magic dust appears out of no where.

Could you make a video of any DC statue from B3dserk Studios please? The way you explain step by step how did you paint, it really helps newbies like me 🤣.

@Groundeffected

2 жыл бұрын

I’ve done Jessica Cruz before. She’s dc. But I make videos based on what I am commission painting or what I want in my own collection. You could sponsor a video and commission a model if you wanted?!

What is the smell like from the resin? I have heard people need to use respiratory because the fumes are toxic. Have 2 FDM printers and want to jump to resin.

@multiversosdeleo3864

2 жыл бұрын

Is like ammonia but not that strong.

@Groundeffected

2 жыл бұрын

It’s really not that bad. Maybe the first day or so you’ll notice it but now I only notice it when it’s open.

I have been looking at these printers . But by the time I made my mind up they had sold out 🤣

@Groundeffected

2 жыл бұрын

Damn. Yea this was one of like 2 or 3 left

Idk about this New machine, but i have the mono x and It is recommended to lower the uv light strenght to 70~80%...

@Groundeffected

2 жыл бұрын

Yea I don’t see where to lower uv strength in lychee so I just use low exposure times.

@leandrokhnychaladacunha6003

2 жыл бұрын

@@Groundeffected the setup is on the machine itself, the HUD looks different from the mono x so I can't tell where it is in this new machine

@leandrokhnychaladacunha6003

2 жыл бұрын

I saw some people theorizing about heat generation, I haven't researched more about this topic but might be good to learn about it and maybe it's a good video topic... Less heat means your LCD lasts longer... I guess stronger light draws more energy Wich generates more heat? I saw an KZreadr theorizing that lower uv power and longer exposure timers gave him better prints... Also I had problems with cured resin on the fep sheet due to the heat, longer light delays solved but I might try lowering the uv power...

@leandrokhnychaladacunha6003

2 жыл бұрын

Oh and also I gave up on that fcking screen protector... Couldn't get rid of the magic dust got pissed and threw it away lol

Space to write words

I dont think much of that dust it has to be said

@Groundeffected

2 жыл бұрын

Man. I can’t say the words I have for that dust.

She's a beaut

@Groundeffected

2 жыл бұрын

Yea I’m happy with her.

First

Magic dust on screen protectors, for phones, tablets, yep,. totally a thing.

@Groundeffected

2 жыл бұрын

It’s magic for real.

Nossa, esse video é tão bom. Só queria que fosse em meu idiota. Curti e me inscrevi!

First