Hey Makers Cave I want to personally thank you for making this video. It helped me tremendously and it’s people like you who help push the 3d printing community into existence. Videos like these are so awesome to help us noobs and are greatly appreciated. I pray much success to you for giving back on these basic type videos. Thank you again 👍

@TheMakersCave

Жыл бұрын

Thank you very much for such kind words. I am by far a 3D printer expert, I just love 3D printing. As a Maker it has to be the most significant tool developed in the last 10 years. I enjoy taking people along on my journey in learning 3D printing. Thanks so much for watching!

Thanks for your time and help, I think that I would have been lost if I had used their directions. I'm new to 3d printing, and I jumped into the deep end to swim. Your videos helped tremendously, kind of like using a cheat code. 👍

@TheMakersCave

5 ай бұрын

Glad you liked it, and thanks so much for watching :)

I'm new to 3D printing and bought mine on 1 Dec and I love it! I skipped the obligatory test print Benchies and went straight to printing out an Agent Carter figure from VX labs. Doing another one right now and sized it up to 1/4 scale, looking good. Having no issues whatsoever. Have changed out a couple of filament spools and that's easy to do. The KZread videos on this printer are also helpful. Now, the Creality Ender 3 V3 SE I bought before this one is another story. It made about 5 prints and became a paper weight. Mechanically it's working, but it just stopped printing any files period. Creality support is no help at all and I'm sending it back.

@TheMakersCave

6 ай бұрын

I think you made the right call by sending it back. The fact that the print out five then stop definitely an indicator that somethings wrong with the printer.

Im new to this channel, brought here becuase ive just bought one of these printers. Im so impressed by the quality of your production Steve, I wish you 1000's more subs like you deserve.

@TheMakersCave

Жыл бұрын

Can't thank you enough for the kind words and for watching. I have a review coming out soon on a Prusa Mini+.

@traviswavis1212

Жыл бұрын

I am with you on that ! Thank God this world has amazing dudes like this to share basic knowledge with us who are starting. It’s only because guys like this make tutorials that I would ever feel comfortable getting in to a complex hobby like this and I truly am so great full for bros like this 💪🏼

Hello... thank you for the video. I would add tie wrap removal, especially the ones under the bed, overall screw check for tightening and a more detailed check on hot end assembly adjustment to the rail. And links to the other Kobra Max videos.

you are a 100% chad for these instructions, thanks for the hard work!

@TheMakersCave

Жыл бұрын

My pleasure and thanks for watching!

Holy cow that is huge and didn't seem to bad to put together.

@TheMakersCave

Жыл бұрын

I find Anycubic stuff easy to assemble. now I can really print some robot parts!!!

Thanks for the vid very helpful

@TheMakersCave

Жыл бұрын

Glad it helped :)

@17:10 the "wire ties" you reference from the assembly manual are the clips hanging around the bowden tube on top of the printhead, not the zip ties. No harm no foul, it works fine the way you did it, but Anycubic intended for you to use the three plastic clips on that length, and use a zip tie near the base around the support strut and the two harnesses.

@TheMakersCave

Жыл бұрын

I basically was winging it. From what I’ve seen they have updated their instruction manual. Mine was very vague and sometimes the pictures matched with nothing on the printer. But like you said, it works

i disagree with z being used for height for a couple reasons, mainly when you look at a 2D plane its only x and y axis but then you add z and that becomes another horizontal axis for 3D. so Y axis will always be height to me. ofc feel free to do as you please

how do you set the Z offset on the Kobra Max?

Be careful with the wires that go to the LCD Display. I ended up pinching them when I was installing the framing posts.

@TheMakersCave

Жыл бұрын

When assembling any printer I'm always cautious of the wiring. I'm building a Prusa Mini+ and the wiring is something you have to be conscious of.

Someone who actually bought that printer joined that chat😂

Hi, I have bought this 3d printer in November 2022 and I was happy with it but in January 2023 Y belt axis was suddenly brocken. Anycubic SAT have sent a new belt but they said they have not instructions to replace. Can someone help me?

@TheMakersCave

Жыл бұрын

Unfortunately I haven't had to replace my belt so I've never done it. Let me take a look at my printer and maybe I can give you some pointers.

@tobajasjtobajas5890

Жыл бұрын

@@TheMakersCave thanks !

Did the printer squeak while printing for any one else?

@TheMakersCave

Жыл бұрын

Hi! Nope, I had no squeaking. Where exactly is it squeaking from?'

@ryangolditch949

Жыл бұрын

@@TheMakersCave Thank you for responding! I figured the issue out… apparently my nozzle was making the noise.

a mi me se a quemado la placa base por poner los clips en laterales

@TheMakersCave

Жыл бұрын

Lo lamento. Es por eso que advertí a los espectadores que no hicieran esto.

Where is part 3?

@TheMakersCave

Жыл бұрын

It should be out this evening. I wanted to do several print tests and a fun print and that took some time. Ran across a unitque setting that you have to use in Cura.

the assembly instructions in the box are the worst assembly instructions i have ever seen... shame on you anycube...

@GeeDeeONE

10 ай бұрын

+ auto leveling doesnt work... print bed goes all the way up and the printhead goes completely out of the print area and is stuck doing this ugly compressor like sound because it is stuck. tried to fix it with the software you use, interrestingly the printbed jumps to the exact good homepoint BUT when i start the auto leveling on the printer itself... printhead goes completely off the printbed... any ideas on that?

@TheMakersCave

10 ай бұрын

I would recheck all the limit switches and their associated wiring. If it keeps happening you may want to reach out to Anycubic and have them send you a new main board.

@GeeDeeONE

10 ай бұрын

if that printer would have made a single print i would do so... but because this thing has never printed anything... no no no... i will not accept any repair... money back and never ever Anypubic again+