AndyCine Lunchbox II Installation & Review
AndyCine Lunchbox II Red: jerad.link/andycinelunchboxiired
AndyCine Lunchbox II Black: jerad.link/andycinelunchboxiiblk
Samsung 870 EVO 2TB: jerad.link/samsung870evo2tb
AndyCine Lunchbox III Case: jerad.link/andycinelunchboxii...
AndyCine Lunchbox USB-C Reader: jerad.link/andycinelunchboxre...
SATA to USB-C Adapter: jerad.link/satausbcadapter
Timestamps:
0:00 - Intro
0:39 - Lunchbox III Case
1:00 - Samsung 870 EVO SSD
1:21 - Unboxing
2:38 - Taking apart the SSD
5:28 - Assembling the Lunchbox II
9:36 - Initial Thoughts
10:31 - Speed Test Results
11:09 - Benefits
11:33 - Comparing Lunchbox II & III
12:38 - Closing Thoughts
📬📬
Get New Video Updates: jerad.link/gearandlightupdates
📷📸🎥
Gear I Use to Make Videos: jerad.link/videoproductionkit
👋👋
Ditch Auto Free Course ► jerad.link/ditchautocourse
Jerad's Weekly Newsletter ► jerad.email
Twitter ► / gearandlight
Instagram ► / gearandlight
Website ► gearandlight.com
Jerad on Instagram ► / jeradhill
Jerad's Photography on IG: / bigsky_visuals
Also Checkout:
State of Tech ► / stateoftech
Jerad's KZread Channel ► / jeradhill
⚠️⚠️ Disclaimer:
The content of this video is intended for viewers ages 13+.
Gear & Light (Jerad Hill) is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com and affiliated sites, which means I may earn a commission if you make a purchase, at no extra cost to you.
Пікірлер: 60
I'm looking to pick up a Atomos Ninja V and I stumbled upon the Lunchbox II. Thanks for the breakdown! This video sold me on it.
Thanks for this fantastic video, Jared. I just oredered 3 of these kits with 1 & 2 TB Samsung drives. I wanted to let folks know that they have GREATLY improved the included screwdriver. It also has a magnetic tip. Speaking of tips, if you are using these Samsung drives, repurpose the tray it came in as a mini work area, this way, you won't lose those tiny screws.
Funny enough, I am watching this video haven stripped the supplied torx driver. I wish I watched this in more detail before ordering the Lunchbox as I would have ordered the T5 Torx driver at the same time. All good, got one a day later and now putting this all together. Thanks for making the video.
Hey, just a little tips, if you don't want to buy an other tool, just grind the one they gave with, until its wide enough to fit in the screw, works fine for me :)!
@ragnarokgzlr8522
Жыл бұрын
Did the same. Works great. 👍🏻
@tom_quinlan
Жыл бұрын
I love you. Thanks a million. Also this comment should be pinned!
@widewatching338
Жыл бұрын
how do u grind it
@ragnarokgzlr8522
Жыл бұрын
@@widewatching338 with a sanding machine, or maybe also just sanding paper works. 0.5-1 mm grinding away should help.
Excellent, it work like a charm with my Ninja Ultra. Thanks!
WOW, Jerad! Great Video. Thank you! Is the 870 EVO working properly with the NINJA V? Please share your experience
Useful, thanks :)
Worked for me!
Hi! Are You not afraid of not using any kind of static protection during procedure? As it was safe inside of the drive's box, then outside it's quite fragile and vulnerable to any short circuit for those low voltage components on the board. Going further with this point of view - is it safe to use it direct to the metal plates? How about it conduction? From the side of thermopad it looks secured, but from the other one? Thanks in advance for a reply ;)
Thx just bought it!!!both!!! Question Evo prores raw HQ doable or kangourou sign will appear(drop frame) Hard to find sustained write speed info Thx for answering Fil
The andycine doesn't connect to the ninja sata connector flush like the atomx ssd mini does. It leaves something like a 5mm gap, when the ssd mini leaves a 1mm gap
Am I the only person who's wondering, if Andycine know the dimensions of the Samsung SSD board and can machine a unit for it to fit perfectly, why on earth can't the thermal pads be pre-cut to fit?? I don't understand why they supply rectangular pads that have to be cut down to size... 🤷🏾♂️
@hiawrj
Жыл бұрын
Haha, yea 🤣
@Samiam-mu5ln
Жыл бұрын
Easier to mass produce a fixed size versus have a machine precision cut to be the exact size of the ssd size. If you cut it down the middle, you literally have about 1mm of extra length on the long end that does not effect the mounting inside the Lunchbox
Great info! I have a Ninja V on the way, getting prepped. Also was that a Spyder Co blade I spotted? 😮
@ditchauto
Жыл бұрын
Yes it is. I love Spyderco knives. Hope all is well with you!!
Dear friend I have a Samsung portable SSD T7 touch would that work? But not sure how to open the SSD card!
Did you figure out the correct tool to open the SSD?
Great video. For other 860 EVO 2TB users, it's bigger than the 870 and won't fit.
what screw drive would you use? I've just got some of these now and the driver you get is awful. But i don't see a link to the driver you used.
Hi, thank you for the great video. I installed a 1TB SSD, and it's working perfectly. However, I bought a second one, a 2TB Samsung, and it doesn't fit in. It's larger. Has anyone else had the same problem?
Didn’t have any problems using the Andycine tool, U just have to keep constant pressure in the screw head. Additionally using the screws from the V or Connect caddies let the Lunchbox and Connect work together…
I had the same issue. The supply driver is one size too small and just straps. Fortunately I had the appropriate size from replacing an iPhone screen. Otherwise the lunchbox series is fantastic!
@sabenza360
Жыл бұрын
The one which came with the kit does not work. Would you mind sharing the size of the screw driver?
@BrianSFischer
Жыл бұрын
@@sabenza360 unfortunately it is a generic that doesn't have the size listed. I think your best chance is to own an iFixit kit.
@ragnarokgzlr8522
Жыл бұрын
@@sabenza360 you can grind the tool that comes with the lunch box.
All 3 screws are stripped!? Any suggestions? Even if I get them out they won't be reusable in the Lunchbox
@simonnew2272
9 ай бұрын
lmfaoo me too what did you end up doing
What type of screwdriver are you using for opening up the EVO back please? Was hoping deets would be in the notes!
@TheSkwrl
Жыл бұрын
P6 Pentalobe
@lightninginabottleuk
Жыл бұрын
@@TheSkwrl I've just ordered this so thanks!
My understanding is that the ninja only supports 2 TB. I'd love to find out if the 4 TB option functions.
@mdoering
Жыл бұрын
The product description says only the 1TB and 2TB models are supported, I have a stack of 4TB drives so was wondering the same. I found some photos online that show the reason, the board is a different shape. On the part that sticks out towards the bottom right on the one shown here, it is about twice the size to accommodate 2 more of the square black storage chips (which makes sense assuming each IC is 1TB on a dual sided PCB, 1TB and 2TB would occupy the same footprint, while 3TB and 4TB would be roughly twice the physical size) all that being said, I would love andycine to make a model compatible with the 4TB drives!
@powerflex500
Жыл бұрын
@@mdoering I have 3 Atomos Ninja V's and all of them, I have installed 4tb WD Blue SSD's. They do work eventhough on the Atomos site states "tested with 1tb and 2tb".
@powerflex500
Жыл бұрын
I'm using them with the Atomos Master Caddy II.
I just bought the Andycine II unit (EDC) but it's too big for my EVO 870. What have I bought/done wrong?
@ditchauto
Жыл бұрын
I’m not sure. That drive should fit just fine. The EDC is made for 2.5” SSD drives.
@joshuatekle
Жыл бұрын
What is the storage space on your EVO 870? @lightninginabottleuk
Jerad, you mentioned the Lunchbox version two supports higher write/read speeds, how so? the Lunchbox is purely a case for the drive, and in no way affects speed of the drive?
@ditchauto
Жыл бұрын
USB protocol effects the read and write speeds.
@Eradicism
Жыл бұрын
@@ditchauto but again, the lunchbox itself is purely a chassis and has no effect on usb protocol?
The drive is not listed as a supported drive on their website
You didn't list the Screwdriver you used.
What is the better screwdriver option you mentioned? I don't see it in your description.
@TheSkwrl
Жыл бұрын
P6 Pentalobe
@Filmspirevideo
Жыл бұрын
@@TheSkwrl Thank you!
Bro please. Model Milwaukee
After hearing you say AndyCine I want to hear you say cine as in cinema
will the fit a Samsung 512GB 860 PRO?
@frankmunoz8876
Жыл бұрын
answered my own question, it does!
These are great, but until they fix the screws sticking up and not being flush with the top, this is not compatible with the Atomos CONNECT module for the Ninja V.
@jarvismorrison9328
Жыл бұрын
Crappers, I wondered about that. Oh well, I got this the connect and Ninja V coming Wed. I got the 870 drive already…
@kanerifilms
Жыл бұрын
@@jarvismorrison9328 wondering how using the 3 together ended up working out for you. I have the V and connect and am considering the lunchbox too. Even if the screws clear, are you able to get the drive in and out of the ninja v / connect since it's so small / tucked in?
@jarvismorrison9328
Жыл бұрын
@@kanerifilms, I tried the screws from the Connect and Ninja V caddies on the lunchbox tops and they work great. No clearance issue with the connect sliding into place…👍🏾
@kanerifilms
Жыл бұрын
@@jarvismorrison9328 thanks for reply. Are you able to take the drive off while the connect is attached or do you have to remove the connect first?
Had to drill the damn screws out……twice smh. If I ever need another drive I’m grabbing an Angel Bird lol