I don't even have an RG35XX but I'll like this video anyway because you deserve some of that sweet algorithm love.

@otggaming3180

Жыл бұрын

😂 Thanks my friend, I will take all of the sweet algorithm love you can send my way!

Very helpful thank you very much. Do you still use garlic or do you like another os more?

When i put my 1st sd card into my laptop (sytem files) it automatically tells me to format it, which i obviously do not want to do..please help me?

Hey it works! Making it FAT32 is very crucial. The default windows exFAT will not work.

Thanks soo much!!!

@otggaming3180

Жыл бұрын

You bet, glad it was helpful!

Hello bro, thank you for the guide, it's very helpful, I want to ask if I install the first USB slot port of 64 GB and the second port of 128 GB, for the game ROMs file, can I put it in both memories? The goal is to increase the game ROM storage capacity

Do I need to do that or can I just put the old as card in & it would load my games I previously played on

i just to clarify this question. what if i have a 2nd sd card which is new, i formatted it to fat32, do i still need the other folders from the first sd card? or could i just create a new ROMS folder on the newly formatted sd card?

@nateadams3606

3 ай бұрын

Solo crea carpetas con los nombres de cada consola y mete los roms dentro.

It works, thanks

@otggaming3180

Жыл бұрын

You bet! Thanks for leaving a comment :)

Cool! BUT i have NO 'Saves' folder near ROMS and BIOS. Where i need to look this folder and how connect it with games?

I will try to set up my RG35XX since it came without any SD CARDS

@otggaming3180

7 ай бұрын

Hope the video will help. We have another one on our channel for setting up GarlicOS. If you want to check it out, it also may help: kzread.info/dash/bejne/eZmuls-ooLK7aLQ.htmlsi=W6hgG8wtLx_Rupkj

Can it hold a 1TB sd card ?

hi friend i have an ambernic rg353v and i want to change the second sd card which contains the ROMS, to a more big sd, but when i copy all the staff the ambernic doesnt read them all, can you help me?

my 1st TF card is garlic OS 128 gb with partition of 60gb and the 2nd tf card is stock OS with games.. can i copy past my stock os games to my 1st SD card garlic os?

@otggaming3180

Жыл бұрын

Most definitely you can copy the roms over to Garlic. Just be sure that you get them into the correct folders on the GarlicOS card. It uses the same folder structure as OnionOS so you can use this reference to identify which roms should go where: github.com/OnionUI/Onion/wiki/Emulators#rom-folders---quick-reference Also, be aware that many of the arcade roms from the stock OS won't work on Garlic. This is because Garlic uses MAME2003 instead of MAME2000. So you would need to get a romset that works with the newer version.

You can pretty much use a 512gb to fill up with full rom sets with aĺl the emulators on garlic minus the mame. Those are a bit harder because some work some don't.

@otggaming3180

8 ай бұрын

Even though I like to keep my collection on the smaller side I still like to contemplate how my 10 year old brain would have exploded with excitement at the thought that one day you would be able to play every game for the Super Nintendo and Sega Genesis on a device that would fit in your pocket.

@allen0088

8 ай бұрын

@otggaming3180 i just decided to take off my tempered glass protector, it kept bubbling up on the side.

@allen0088

7 ай бұрын

@@otggaming3180 my adult brain still struggles with the idea you can have library arcade in your pocket

@otggaming3180

7 ай бұрын

@@allen0088 It truly is wild to contemplate.

is there a way to check if my 2nd sd slot working or not? coz i did everything correct (i think i did) but still nothing is showing upppp but when i put back all the file in the 1st card all working properly

@matthewrowland9683

5 ай бұрын

I was able to see basically copies of the consoles in my console tab. I didn't want to combine them just yet since I am not 100% comfortable on it, but I am seeing duplicate consoles not side by side, but when you scroll. hope that helped.

Do I need to empty the ROM or SAVE folder on SD card 1 to ensure things are saving to SD CARD 2? How do I specify where saves should go?

@otggaming3180

6 ай бұрын

Yes, that would be ideal. Both the ROM and save folders should be on card 2. If card 2 is set up correctly that is where GarlicOS will look for and store saves. You can store ROMs on both cards, but if they are just copies of each other you will get duplicate game entries in the consoles menu.

Is it possible to have roms on both card? If yes can you make a tutorial?

@otggaming3180

9 ай бұрын

It is. And I will make a tutorial if I get time. Thanks for the suggestion! :)

@iAZME

8 ай бұрын

@@otggaming3180 so you got the time? been looking forward to this. great video btw

Can I have games on two cards? 1(+ os) is light games, and 2 are heavy games?

@otggaming3180

8 ай бұрын

Yes you can. GarlicOS will look for a ROMs folder on both cards and will display the games on both. If you have the same games on both cards you'll see duplicate entries, so if you set it up the way you described you should be good 👍

@romanukhach40

8 ай бұрын

@@otggaming3180 Thank you!

@otggaming3180

8 ай бұрын

@@romanukhach40 No problem. Hope all goes well and happy gaming :)

When I connect my sd card to my computer it only shows USB Drive E instead of showing the partitions such as ROMS etc. Can anyone help me why is this happening?

hey man i need help so basically i have garlic os installd on sd1 and the sd1 doesnt have any roms installed. while i followed your tutorial and copied all the roms to sdcard 2 and none of the roms shows up on my rg35xx after booting the console. halp

@123Wasdalos

Жыл бұрын

same here. Did you already managed it?

@Nellis00

Жыл бұрын

@@123Wasdalos i gave up vro im just gonna buy a 128gb sdcard since its only $9 usd here in my country haha

@otggaming3180

Жыл бұрын

Hi There, Just to verify... SD2 is formatted to FAT32? And also you copied your roms directory exactly as it is from SD1 to SD2? If yes to both, maybe trying a different SD card as your planning will fix the issue. Hope all goes well and that gets it working for you :)

what happens if you format sd 1

Please help. The problem is that , I have copied all the roms from the stock card to the second card , but the garlic os can't see all the consoles , but the stock os can ? Please could you explain . Thanks

@otggaming3180

Жыл бұрын

I would double check that the roms made it into the correct folders on the card. GarlicOS uses the same folder structure as OnionOS so you can use this webpage to verify which folders your roms should go in: github.com/OnionUI/Onion/wiki/Emulators#rom-folders---quick-reference

@adrianbudnik6413

Жыл бұрын

@@otggaming3180 Thank you , but if you can provide me with the names of these systems in garlic os I would appreciate it greatly - thank you Vertical Arcade CPS Neogeo FBHACK MAME SMS PCE Thank you again .

@adrianbudnik6413

Жыл бұрын

@@otggaming3180 and also , did you experience a situation when either on garlic os or stock when you switch off the console , the only way to switch it back on is to connect it to the charger ? What can you suggest for that ? Regards

@otggaming3180

Жыл бұрын

@@adrianbudnik6413 Sure Vertical Arcade>Arcade folder (There isn't a separate folder for vertical arcade in GarlicOS, so they just go in the Arcade folder) CPS>CPS1 or CPS2 or CPS3 folder FBHack>FBNEO (Again, there is no folder on GarlicOS for FB hacks, so they just go in the regular FBNEO folder) MAME>Arcade or MAME2000 (depending on your romset) SMS>MS folder PCE>PCE folder

@otggaming3180

Жыл бұрын

@@adrianbudnik6413 I've only had that happen once. I was able to fix it by holding down the power button for about 30 seconds and then the system finally rebooted.

What do I do if I deleted the Rome folder

So basically, u just need to format the sd card 2 and Copy -paste roms folder and i ready to go? I dont need to install another garlic os to my sd card 2 ?

@saufimuhammad8147

Жыл бұрын

And one question more, what if i have roms on my Sd 1 but also have roms on my sd2. does the console can read it ??

Just format the card to 32 fat n put it back in to the rg35xx n it puts the rom file on it for you

I came looking for a solution but havent figured it out yet, i got a rg35xx with 2 sds, all roms on the 2nd, i removed the first sd card and put in a new one with garlic os on it, now garlic os works but i only have 7 consoles, wheres the rest? the original os had more like ps1 etc.

@otggaming3180

Жыл бұрын

It could be that the ROM folder names are different from the ones GarlicOS is looking for. You can use the OnionOS wiki to double check the folder names as it uses the same folder naming convention as GarlicOS: github.com/OnionUI/Onion/wiki/Emulators#rom-folders---quick-reference If any of your folders are named incorrectly you can try renaming them to see if the missing consoles show back up.

@carlh2007

Жыл бұрын

@@otggaming3180 yup your spot on, im not if many people order the version with the 128gb card and then reuse that same card of roms for garlic os so wasnt able to find any info on this. Thanks!

@carlh2007

Жыл бұрын

@@otggaming3180 i know your vid is a complete install method. It would be great to see one on how to use garlic os, each vid only touches it on it a little. some things i havent been able to figure out yet is how to delete saves, if i have multiple saves how do i access each one

@otggaming3180

Жыл бұрын

@@carlh2007 No problem, glad that worked for you! Yes that is a challenge. There's not much documentation on all the features of GarlicOS, so learning much of it is just poking around to see what happens. Since the backend is RetroArch, some knowledge of how it works can be helpful as well. I also check out the RG35XX subreddit fairly regularly as there's tons of good info shared there: www.reddit.com/r/RG35XX/ As far as I know the only way to delete saves is to do so manually from the Roms SD card. There is a "Saves" folder on the card with a separate area for sram saves and savestates. You can drill down into each emulator folder and find that the saves will match the name of the game they were created for. Changing the save state slot is done from the RetroArch menu which you can reach in-game by holding menu and pressing X. The 4th option down is the state slot. Another feature that some aren't aware of is that if you want to start a game without using the most recent savestate, press start instead of A when selecting a game and it will launch as normal instead of loading the last savestate.

@carlh2007

Жыл бұрын

@@otggaming3180 thank you for such a detailed response. I have found the sub reddit and ive already got a post ill put up there later around dos games. the RG35XX has been great so far my most played game is tetris on gameboy my wife and i are battling out the high score haha.

Can i use a 64gb for my OS and 128gn for ym games?

@otggaming3180

Жыл бұрын

Yep, sure can :)

@pirateking7122

Жыл бұрын

@@otggaming3180 do you have a tutorial on how to transfer my files from the stock SD card that comes with the anbernic to a new dual sd card setup?

@otggaming3180

Жыл бұрын

@@pirateking7122 I don't, but it shouldn't require too many extra steps. You would set up the 2nd card as I describe in this video, then copy the roms from the stock SD card to the correct ROM folders on SD2. You can use the OnionOS wiki to determine the correct folder for each console, it uses the same folder structure as GarlicOS: github.com/OnionUI/Onion/wiki/Emulators#rom-folders---quick-reference

what is folder name for PS1?

@otggaming3180

Жыл бұрын

The folder name for PS1 is just "PS".

Tried this on my new RG35xx but can't pass Garlic OS loading screen :(

@otggaming3180

Жыл бұрын

Bummer! Does it only happen when you try to use the 2nd sd card?

@keithmargarico485

Жыл бұрын

Solved it! I downloaded the 3.1.4 instead of the newest garlic os! Now my problem is I can't see my other games that I transferred from the stock sd card to my NEW SD card

@keithmargarico485

Жыл бұрын

And can I get my saves from the stock sd card to my new sd card?

@otggaming3180

Жыл бұрын

@@keithmargarico485 I would double check that the games were moved to the correct folders and that those folders have the correct names. You can use the OnionOS wiki to verify the folder names as GarlicOS uses the same Rom folder structure: github.com/OnionUI/Onion/wiki/Emulators#rom-folders---quick-reference And I haven't attempted to transfer saves from the stock SD yet but I've heard from other users that it can be done. There's some info in this Reddit post: www.reddit.com/r/SBCGaming/comments/10n4dfx/save_data_transfer/ I think I'll try it out soon and make a video if I can get it to work.

@wilmarkballaran1734

Жыл бұрын

@@keithmargarico485Hello I having the same issue in garlic os loading screen, how can i set the download that you said here? thanks

Isn't playing a musics and videos!!

please help im a total beginner .my rg35xx just goes blank and doesnt work . i bought a new sd card and just want to put what was on the stock card on my new sandisk 64gb card . ive watched your video but when i fat32 the usb(d drive) its says " Failed to open device GetLastError()=32 The process cannot access the file because it is being used by another process." i dont know what im doing , i just want my anbernic to work . this sucks ass