*Small Correction* - The bottom additional fan supports are for 140mm fans, not 120mm.

@hippowafflesify

3 ай бұрын

It can fit 120mm too :)

@beanis87

2 ай бұрын

@@hippowafflesifyit has space for it but no holes to connect them

Enjoyed hearing your take on this, informative and great style buddy! ✌️

@jordanash

8 ай бұрын

Thanks dude!

Thank you for doing a airflow build! Ive been searching for one. Subbed atm! I was gonna buy the Phantek NV-5 if it was easily available here locally but couldnt find one. I saw this one selling for around 120 usd so I'd probably go for this with a black out theme. THANK YOU SO MUCH!

@jordanash

8 ай бұрын

You're welcome, thank you for subscribing. Sounds good to me!

The only KZreadr who explained the fans thank you so much man, I was struggling

@jordanash

6 ай бұрын

You're welcome.

Thanks man! You got a new sub

@jordanash

8 ай бұрын

Happy to help! Thank you

Finally, some one its doing a review with the black version!. :)

@jordanash

8 ай бұрын

Glad to be of service

Beautiful build. How silent are the 3 fans that came pre installed please?

@jordanash

7 ай бұрын

Thanks, came out well for a test build. Pretty quiet yeah, I had them set to 1600 RPM as I mentioned, but even that they were still not overly loud.

Heyyyy quality build was thinking of switching over to this case but currently got a matx mobo in my build any opinions on how this would look in this case with dead space etc thanks

@jordanash

8 ай бұрын

Personally I don't like using smaller boards than cases can accommodate, but you could always get a vertical riser for your GPU, then the gap will be covered.

like this one nice case 👍

@jordanash

8 ай бұрын

Nice, isn't it!

@anthonypra8899

8 ай бұрын

@@jordanash still not a fan of NZXT controller only having three plugs unless I'm thinking of something else

@jordanash

8 ай бұрын

​@@anthonypra8899This case has an adapter I showed in the video, but the hubs have three connectors yeah.

@anthonypra8899

8 ай бұрын

They have a multiple different videos I'm sure somebody caught that I saw this video of multiple different times different ways love the case I didn't see all of it though I had to go somewhere like the White Version a lot

pc cases are getting bigger and bigger, wonder how big will they be in 20 years

@jordanash

8 ай бұрын

This is pretty compact tbh, check out my video on the Phanteks Enthoo II Pro if you want to see something *BIG.* kzread.info/dash/bejne/rJqoo5Z6hs7Rhaw.html

I'm doing my first self build in this case soon. I was looking at RGB fans originally but I haven't turned the lights on my 4 year old pre-built PC since the day I got it lol, so now I'm going down the road of performance fans. I cant decide between Noctua chromax, Silent Wings 4 pro or Phanteks t30 (all non RGB).

@jordanash

28 күн бұрын

Noctua are the best (and most silent) fans I've used, but they're $25 a pop. Certainly a case of "you get what you pay for" though

@modwolves_live

28 күн бұрын

@@jordanash Cheers, that's what I'm leaning towards.

@jordanash

28 күн бұрын

My first PC I used a Noctua cooler on, ran it for eight years without a single issue.

I like how it looks, but hate the lack of dust filters

@jordanash

8 ай бұрын

Potentially one dusty boi

@jimodell99

8 ай бұрын

Surely dust filter material can be purchased. Wouldn't be a problem unless you like to watch the RGB fan lights, which I don't.... and won't. I'm about to build a new rig with the non-RGB version of this. Contemplating getting a washable electrostatic filter from Home Depot, cut, and fit under the bottom for the two fans that will mount there. Should be easy to build something to hold it. Maybe add to the feet a little to raise it up off the desk. I do need to make one correction. Unless the British version is different, all the other videos I've watched show the 2 in the bottom of the case are 140mm fans, not 120's.@@jordanash

@jordanash

8 ай бұрын

NZXT focus on Airflow, but to be honest just giving it a clean more regularly to get better temps is worth it. I've already put a pinned comment correcting the fan size on the bottom.

great case but having proprietary connector on the base fan and not having the header included with the case is a shame, if you dont pay attention you cannot plug them, other than that the case is amazing it looks amazing the cable managment is great

@jordanash

8 ай бұрын

They have adapters though, I mention that in the video.

did you need an NZXT controller for the core fan in the back?

@jordanash

7 ай бұрын

Yes, unfortunately

👀

@jordanash

8 ай бұрын

Oh hai

Hello, I'm considering purchasing this case to optimize the cooling performance of my components. Yet, I'm uncertain about the ideal number of PC case fans required to achieve maximum airflow. The configuration I'm contemplating involves three 120mm fans on the top and one 120mm fan at the rear for exhaust, supplemented by two 140mm fans at the bottom for increased intake, in addition to the three stock 120mm intake fans provided. Would this setup be the most effective configuration for maximizing airflow? BTW, I am also using the DeepCool Assassin IV Air Cooler.

@jordanash

7 ай бұрын

I mean as you can see in the video even just the fans I'm using in the case work well. It's more down to the CPU and GPU you're using to how many fans you need. Guessing as you're using an air cooler you're not using a CPU that's too high in the SKU stack, so you might not even *need* the extra fans in the bottom and top. I usually don't add extra fans on the bottom or in the roof unless I'm using a higher SKU that needs an AIO.

@Draken0912

7 ай бұрын

@@jordanash Thanks man, I made a mistake by getting a 4070, a 7800x3d and housing it in the h710 :(

@jordanash

7 ай бұрын

No worries. Ah the solid front panel one, ouch

@jade6548

6 ай бұрын

can you fit Assassin IV on h6 flow? because from the specs i don't think it will fit

@Draken0912

6 ай бұрын

@@jade6548 Sad to say based on the specs it will not fit.

Hey, what cpu cooler is that you’re using?

@jordanash

6 ай бұрын

It's in the video, 7:44

I think they should name it as H8, in between H7 and H9 kind of case. Making much more sense. Rather than H9 lookalike yet, in between H5 and H7.

@jordanash

8 ай бұрын

H16, both combined haha

Sir H6 flow or H9 Flow which one is better. Please reply sir.

@jordanash

8 ай бұрын

H9 is a *lot* bigger than this. Personally I love the H6, great form factor and good price too.

Won't this case get very dusty considering it has no dust filters? Or will positive pressure be enough to keep it away? I really dig this case but am too hesistant because of that, might just get an h7 flow instead

@jordanash

7 ай бұрын

NZXT seem to be all about airflow now, just might need more regular cleaning. Don't be hesitate because oy might need to clean it a couple more times in a year, the performance gain is well worth it.

@vincevicente6606

7 ай бұрын

@@jordanash Thanks for the insight mate! One more thing, if you were to choose between this or the H7 Flow, which would you prefer? The H7 Flow seems more efficient but the aesthetics on this are so good, having a hard time deciding.

@jordanash

7 ай бұрын

No problem. Oh I'd go for this, even though the airflow isn't directly straight on, as you can see with the results in the video it's still keeping the system nice and cool. The H7 is nice and easy to build in, but this is something unique and I love it.

@vincevicente6606

7 ай бұрын

@@jordanash Thank you again mate! Already ordered mine online 🫡

@jordanash

7 ай бұрын

Most welcome. Awesome, enjoy!

Nice case!!! Does the nh d15s fit in this case?

@jordanash

8 ай бұрын

I covered that exact point in the video

@cloudivan1718

8 ай бұрын

@@jordanash the nhd15 is 165 mm with the fan. Nhd15s is 160 mm with or with out the fan. That why im asking if it will fit on actual senario. Im planning to buy the case.

@jordanash

8 ай бұрын

I meant that in the video I give the exact clearance dimensions. It's at 4:03. It has a clearance of 163mm, so NH-D15S if it's 160mm then yes, NH-D15 at 165mm no

@cloudivan1718

8 ай бұрын

@@jordanash oh i see thanks.

@jordanash

8 ай бұрын

I try to put as much information in the videos as I can so people's questions get answered.

Are the 3 fans that come with it enough?

@jordanash

2 ай бұрын

I'd add a rear 120, but otherwise yeah

Does the case come with the GPU holder ? the cylindrical "foot" ?

@jordanash

6 ай бұрын

Like an anti sag bracket? No

@Ibanezdany

6 ай бұрын

@@jordanashThank you so much for the reply

@jordanash

6 ай бұрын

No problem

I just got my case today and I never built a pc and I never got a power cord do I have to buy one?

@jordanash

6 ай бұрын

It comes with your power supply.

@GodSavedJJ

6 ай бұрын

@@jordanash what’s a power supply?

@GodSavedJJ

6 ай бұрын

@@jordanash nvm found it thanks!

@jordanash

6 ай бұрын

Great

Can i fit 2 140 mm in the bottom of this case?

@jordanash

7 ай бұрын

Yes, my pinned comment says they take 140mm not 120mm

Is it future proof to fit a rtx 5090 or 6090?

@jordanash

7 ай бұрын

No idea as those don't exist haha

Do I need a radiator for this

@jordanash

7 ай бұрын

No mate, in the video I'm just using an air cooler

Does it come with stickers?

@jordanash

6 ай бұрын

Not if I didn't show any. Stickers for what?

@CheeseyDo

6 ай бұрын

@@jordanash Like small circular stickers, i was hoping that came with the case, so i can stick it on corsair case fans to look like nzxt fans, since there mad expensive

@jordanash

6 ай бұрын

Ahhh, I don't think so no. Corsair fans are good anyway though.

@CheeseyDo

6 ай бұрын

@@jordanash Alr but do you think it will match my build? and not stand out?

@jordanash

6 ай бұрын

Depends on the models you have and the version of the case really

Got the black non-RGB for £79.99 which I think is a bargain

@jordanash

3 ай бұрын

That's a great price, enjoy

@jeremypike5553

2 ай бұрын

Wow good price, where was that from ?

esploldi

@jordanash

6 ай бұрын

Ma kellhiex bżonn tkun taf dan

First

@jordanash

8 ай бұрын

Unlucky, first comments get held for review 😂