Tengo 70 años y cuando tenia unos 9 o 10 años me habian regalado un barquito a vapor como este u nos pasabamos horas en los charcos de agua del barrio jugando con ellos, una infancia creativa que teniamos en aquellos tiempos !!!!

Nice job. I’ve seen a small steam boat as a kid which moves using this engine. So basically this same engine is mounted inside a ship “body “ which is designed to go in a circle as long as the fire is on. Was a fun toy! 😁

@MrGamb

Жыл бұрын

Nice! thanks for the comment!

@arsenijearsen3041

Жыл бұрын

​@@MrGamb did you put water in pipes and if you do how much water "half or more or less". Sorry for my english.

Now I can make the cute boat from Ponyo!!!

@ahmadmubasyir5853

Жыл бұрын

❤❤ pencetnya berapaan mesinnya❤❤

I've seen several videos of hand made pop pop boats and yours si the most beatiful one 👍🏻

@MrGamb

Жыл бұрын

Thank you very much!

I like your ideas Mr. Gamb.

Good job! Congratulations on your dedication and commitment!

@MrGamb

3 жыл бұрын

Thank you very much!

Parabéns 👏👏👏isso fez lembrar quando eu era criança , tinha um barquinho desse era vendidos em lojas, usava algodão humedecido em álcool quando aquecia a água criava vapor e começava a andar muito bacana esse vídeo, vou fazer um para p meu neto.

Increíble. Lo felicito. Saludos desde la Patagonia Argentina.

Uma engenharia Simples mais altamente criativa . Até o barulhinho lembra um motor a diesel de um barquinho 😅 cheguei aqui pelo outro vídeo do barquinho de sardinha 😊 Congratulations keep up the good work .👌🇧🇷

@MrGamb

11 ай бұрын

valeu irmão!

The paint can bottom for the dome is a good idea.

The vice pipe bender was a veryh clever idea and one will use.

I thought we put water through copper pipes into that round container, which we heat with candle to produce steam, which runs the boat.

Simplesmente…, fascinante, nem sei mais o que falar 😮 Abraço aqui do Brasil 🇧🇷

@eduardo7-7-7

Жыл бұрын

O mano do vídeo é brasa

@MrGamb

Жыл бұрын

Obrigado Amigo! abraço...rs idem

Good Job my dear friend!!!!! Awesome!!!!

@MrGamb

3 жыл бұрын

Thank you very much!

Todas crianças dos anos 60 já tinham estes bar os vendidos pela Estrela,isto só é uma lembrança não é novidade .somente que na época usava algodão em álcool.vela é mais seguro.

NOS ANOS 1958, NOS MEUS 13 ANOS, CONSTRUI DESSES BARQUINHOS DE BRINQUEDO, NA EPOCA, TUDO FIXADO POR DOBRAS E REBITAGEM, NÃO TINHA A FACILIDADE DAS SOLDAS, DIA DESTES, MEU MANO NASCIDO EM 19951, LEMBRAVA DESSES MEUS BRINQUEDOS FUNCIONANDO A FOGO, COM RUIDO DE MOTOR DE POPA, MUITO BONS TEMPOS, CONSTRUI MUITOS BRINQUEDOS.

@JoseAugusto-bj1sf

Жыл бұрын

MANO NASCIDO EM 1951.

Mr.Gamb. I hope you might reply. I think of all the videos on pop pop boilers, this is the best. I've watched many but no one is talking about the angle of the boiler. How did you arrive at the tipped up design rather than flat. One other thing no one mentions is metal prep to remove varnish. I've encountered this and takes awhile. I also thought of soldering the disc inside the boiler as yours, but am going to attempt to solder it on the flat edge of the can first. Sorry for length of post. It looks like you're using 5/16" tubing, does diameter matter ?

@MrGamb

Жыл бұрын

the inclination of the boiler has to do with the accumulation of steam in the highest part! and also to facilitate the release of excess heat from the flame, which in my case could melt the solder on the tube, tin is not a good option for this! but if you don't leave a very strong flame it works! I used 5/16"! For the size of the boiler, I think it's the most appropriate measure! I don't have much knowledge on the subject... I hope I helped! Thanks for the comment! Hugs...

@williamokrasinski9840

Жыл бұрын

@@MrGamb Thanks for the reply. My experiment only worked briefly until the solder blew out near the flame. Plus the .006" (.1524 mm) thick lid wasn't flexible enough to pop. I'm trying to figure some way to lock in a soda can Aluminum top inside the ring of the boiler. It's becoming somewhat harder to construct this design than many videos show. I haven't tried Silver solder, but heat required may deform everything. Still trying. Thanks again.

@rogerlemagnifique7415

Жыл бұрын

@@MrGamb I built it many years ago, but now I realize why mine didn't sound, I'll try one more time, thank you Mr.

@rasvan55

Жыл бұрын

@@MrGamb - ”the inclination of the boiler has to do with the accumulation of steam in the highest part”, but the protruding ends of the pipes should be there too, otherwise the water would be thrown out also, hence the inclination of the boiler should be the opposite way. Nice idea, anyway! What about using lighter pipes and with nozzles, to increase the speed of the steam, the inner pressure, the temperature of the steam and the energy of the jet?

@rasvan55

Жыл бұрын

You can hammer the outer ends of pipes around a needle to get nozzles, then you can load water with a syringe.

Agora sim ficou bem mais top com o motor feito

Thank you!

Ponyo and Sosuke joined the chat...

Great idea !!!👍

Absolutamente Genijal 😃

Give this guy a freaking oscar

well done!

Nice. How about if we use 2 set of motor? Does it sound like a harley davidson?

@MrGamb

2 жыл бұрын

Great idea! I will think about it. 😉

@kenzmatt221

2 жыл бұрын

@@MrGamb Thanks. I should subscribe for your next videos 👍

@robatlarge3478

2 жыл бұрын

Yeah with no exhaust. Seriously a Harley with no exhaust is loud and almost bubbly sounding.

spectacular...

@MrGamb

3 жыл бұрын

Thank you very much!

Excelente.

Шедеврально!!!

Incredible 🙀

@MrGamb

2 жыл бұрын

Thank you very much!!

Дуже креативно, вітаю! 👏👏👏👏🤩🤩🤩🤩

@MrGamb

2 жыл бұрын

Велике спасибі!

Nice Sir 😁👍🏻

Super engine!

Pregunta. Cuando se suelda con estaño no se derrite la soldadura con el calor de la llama de la vela.

@MrGamb

11 ай бұрын

¡Hola amigo! si el calor es muy intenso se derrite si!

What glue do your recommend using? I don’t have a metal welding machine.

@MrGamb

2 жыл бұрын

epoxy glue

@diegosilang4823

2 жыл бұрын

There is no machine involved. You can buy a cheap soldering iron for $30 or a better model from Hakko for $75. You need flux and soldering tin and they are fairly cheap to buy.

@Cheez-Itz_Christ

2 жыл бұрын

@@diegosilang4823 I made one out of a pencil once, and it worked surprisingly well

@senatorjosephmccarthy2720

Жыл бұрын

@@MrGamb , heat releases most types of glue. Epoxy might or might not hold during heating from the candle. Thank you for the instructions.

What is the the flat circle made of?

@MrGamb

2 жыл бұрын

I used a piece of lubricant spray can

You can kill time with that great.

I thought about making one out of the bottom of a propane tank and the top of a 55 gallon drum and put it on a small fishing boat and ride it around.

@MrGamb

2 жыл бұрын

dude...try it, I hope it works!👍

@boomstick4054

Жыл бұрын

Maybe add a sound damper to the top. Definitely will be loud.

The fire might be hot enough to melt the solder. What is your experience with that?

@MrGamb

2 жыл бұрын

Hi! The water vapor doesn't get too hot! But if the fire is excessive this can be a problem! I had this problem!

@rogerlemagnifique7415

Жыл бұрын

@@MrGamb No if you use the solder that plumbers use 50 or 90, it is easier to weld with the torch.

Nah , Amazing work .

Can this method actually work if one is trying to build a realistic pop pop boat that can fit 2 people?

@MrGamb

2 жыл бұрын

Hi! I don't know if this can be replicated on a larger scale! Would have to try!

@arnoldtm31

Жыл бұрын

you can't. The thermal efficiency is very low. The heat on a larger scale will have to be extreme for it to work. Even if you manage the heat somehow, the cost of fuel will be prohibitive.

@kaeiid3852

Жыл бұрын

@@arnoldtm31 oh, alright. Thank you for the info.

great video, but what material did you use to weld? Is it just tin??

@MrGamb

6 ай бұрын

Yes!

Amazing steam engine for put put boat

Amazin....

Supper sir ur video

Czy to robi się z puszki z materiału fe czy Al?

@MrGamb

Жыл бұрын

fe

Spectacular Thanks a lot 👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️

@MrGamb

11 ай бұрын

👍

Muito bons teus vídeos. Vi que os rótulos são brasileiros. De onde você é, amigo?

@MrGamb

Жыл бұрын

Obrigado! sou do PR

👏👏👏🔝

Can blades be installed in the holes for thrust after that explanation?

@MrGamb

6 ай бұрын

I don't understand friend!

Amazing gonna do this. What is the Diameter of the copper pipe?

Такой двигатель в старом журнале юный техник видел

@our_Petersburg

Жыл бұрын

Как он работает ? Ведь система замкнутая, откуда двигатель берет воздух?

@Endrus_

Жыл бұрын

@@our_Petersburg Там нет воздуха, он работает на воде - сначала в установку заливается вода, потом её нагревают.. Вода при нагреве расширяется, - и выходит через край трубки, а с другой трубки соответственно засасывается холодная вода, объём уменьшается и так по кругу...

Sound like a honda

Will the lead melt when we heat for long time??

@Yash-yd3wm

2 жыл бұрын

Yes bro because of it is soldering wire it will be melted if used for long time

@MrGamb

2 жыл бұрын

if the flame is strong it can happen!

Uma calderinha ou alguma coisa parecida com o motores stirlings ? Pequena no meu ver ! poderia dar mais detalhes do funcionamento não é ?

@MrGamb

Жыл бұрын

não tenho muitos conhecimentos em fisíca, mas creio que quando a água aquece forma vapor, empurrando um pequeno fluxo pra fora, nesse momento forma - se uma pequena pressão negativa, puxando água para seu interior que vai aquecer gerar pressão positiva! Isso vai se alternado onde o fluxo de expulsão é um pouco maior que o de admissão, o empurrando para frente. Espero ter ajudado!

That's how the USS Enterprise was made.

@MrGamb

Жыл бұрын

🤣🤣🤣

@mrBDeye

6 ай бұрын

Captain Kirk: Engines at full speed. Scotty: We can’t go any faster. Spock: Interesting indeed.

what kind of tin did you use???

@MrGamb

Жыл бұрын

regular spray can

Bro has a whole engine dyno for a steam engine lol

Mr. Game ? I like to see if a human can ride a larger size steam pop pop engine boat using the bottom part of a 42 gallon barrel, big copper pipes, automotive sheet metal with a small fishing boat for 2-4 people.

@MrGamb

2 жыл бұрын

I imagine it would be pretty cool!👍

@stclairstclair

2 жыл бұрын

LQQK up a propane powered Pulse-jet, It is the progression of this idea.

Hola. disculpe, ¿cuál es el diámtro del tubo de cobre que utilizas? saludos

@MrGamb

Жыл бұрын

¡Hola! ¡lo siento por el retraso en la respuesta! usé el de 6mm

@MrGamb

Жыл бұрын

1/4 de pulgada!

@sergiomp95

Жыл бұрын

@@MrGamb gracias amigo, las latas son de acero verdad ?

indonesia 1992 here :V i calling boat klotok klotok

Alguien sabe por que la soldadura de estaño no se funde con la mecha de parafina?

@rogerlemagnifique7415

Жыл бұрын

Por el agua y porque el calor no es suficiente, aparte aun sin agua necesitaria un poco de pasta para soldar, intenta soldar sin pasta y veras.

@guillermocortes7854

Жыл бұрын

@@rogerlemagnifique7415 gracias por tu aportación, bendiciones

@carlosalbertodalbem2755

Жыл бұрын

Por estar em contato com a agua

@guillermocortes7854

Жыл бұрын

@@carlosalbertodalbem2755 bien gracias y bendiciones

Is it necessary to use copper pipe only ?

@stclairstclair

2 жыл бұрын

It's cheap and easy to solder, but you can use brass(hard to bend) or aluminum (hard to solder) or steel brake line(too heavy)

@MrGamb

2 жыл бұрын

Hi! As the friend said, it is the best material to use!

@jzjzjzj

2 жыл бұрын

No but copper is soft and pliable and easy to bend you can use other pipe if you can bend itt

Класс.

I'm trying to build on of these, and for the life of me I cannot get the aluminum and copper to solder. The solder just floats on top and never sticks, no matter how hot I get the metal. Can anyone offer any advice?

@MrGamb

6 ай бұрын

You need to use a soldering flux and the correct materials.

Que es lo que pone en el pincel antes de soldar con estaño?

@MrGamb

2 жыл бұрын

pasta de soldadura de estaño

👍👍👍

But the heat of the candle will melt down the solderings & the steam leaks😅

Claro que si..🚤

👌

🙏👌👍👍

which metal for welding

@MrGamb

2 жыл бұрын

I used tin!

@senatorjosephmccarthy2720

Жыл бұрын

That is not welding. It is soldering.

@pratikbhagat1731

Жыл бұрын

@@senatorjosephmccarthy2720 ok.

Anda terlalu niat bambang

You really need to put an explosion warning over the part where you cut open a can with propellant with a grinding wheel cutter!

@stclairstclair

2 жыл бұрын

Ha Ha, @ 0:35 you can see the explosion warning label on the can!!!!!!!

@Mark017m

Жыл бұрын

Yeah, I noticed that too.

👍👍

funciona com lata de coca cola?

@MrGamb

6 ай бұрын

Sim! Mas teria que usar algum tipo de cola! O estanho não adere no alumínio!

you better hope those are not your mom's sewing scissors

@MrGamb

Жыл бұрын

😁

Ponyoooooo!!!

Yu call that a weld ?!

Song at end plz

Indonesians:OTOK OTOK. ASHIAPP

Perahu otok otok versi luar negeri

sanjay

Yang mesinnya berapaan

🙂

Q pegamento le hechas

@MrGamb

Жыл бұрын

estaño

By the way this is NOT proper solder technique

Нима у узи

🚤

DON'T FORCE VIEWERS TO WATCH YOUR SLOW MOTION @ 2X SPEED

Como siempre: es imposible de hacer en la realidad y además no funciona.