Amazing Pen Blank You Can Make
Тәжірибелік нұсқаулар және стиль
This is a fun blank that's been in the back of my mind for quite some time. It was a great time getting out into the shop and bringing it to life.
Regards,
Bob
Facebook: / 992853487406788
E-Mail: RJBWoodturner@yahoo.com
Be sure to check out my second channel, WhatchaDoinBob, it’s a VLOG about what I’m doing at any given time. / whatchadoinbob
Пікірлер: 274
Wow Rob! Those are gorgeous! Thanks for what you do and for sharing it with us!
@RJBWoodTurner
7 жыл бұрын
+Steve Brown Thank you Steve. Regards, Bob
Fantastic work! Thank you for sharing! Really appreciate the time you've put into this!
@RJBWoodTurner
6 жыл бұрын
+Nathan Haynie Thank you Nathan, This was a fun Blank and I’ve made several more since. Regards, Bob
Great job. Like those wacky cutting boards.
@RJBWoodTurner
3 жыл бұрын
Thank you Ross. Regards, Bob
I appreciate the time you took to share your work, thank you Bob for your work, it was great, nice work to show off thanks to your inspiration !!!
@RJBWoodTurner
3 жыл бұрын
Thank you Cesar. Regards, Bob
They look great, very funky. Thanks for showing Bob
@RJBWoodTurner
7 жыл бұрын
+Willmore's World Of Wood Thank you. Regards, Bob
Bob, you continue to amaze me! I'm just getting back into pen making and now I have yet another of your techniques to try. Thanks for the inspiration to get in the shop again!
@RJBWoodTurner
7 жыл бұрын
+John Shaffner Thank you John, Regards, Bob
Wow.... It turned out amazing. Great looking pen. All the light - OUTSTANDING!!!
@RJBWoodTurner
7 жыл бұрын
+Bob Stembridge Thank you, I can't believe how I worked in the shop before the lights. It's like an operating room now. Regards, Bob
Wow that is stunning Bob, I love it.
@RJBWoodTurner
7 жыл бұрын
+John Whitlock Thank you John. Regards, Bob
I so love your videos! I learn so much and am very grateful to you!
@RJBWoodTurner
6 жыл бұрын
Thank you Madeline, I appreciate the comment. Regards, Bob
Wow! Thats really nice. Im so in the shop today to make this. Thanks Bob.
@RJBWoodTurner
7 жыл бұрын
+Erick L Thank you, Regards, Bob
Thanks Bob for another good and great job!!
@RJBWoodTurner
7 жыл бұрын
+Kwstas Antwniou Thank you Kwstas, Regards, Bob
You are the king of innovation ... and one of the most patient guys I've seen. Love it.
@RJBWoodTurner
7 жыл бұрын
+Russ Hughes Thank you Russ, Regards, Bob
Good recovery with the click pen or pencil, nice looking blank.
@RJBWoodTurner
3 жыл бұрын
Thank you Steven. Regards, Bob
Thanks for sharing Bob, that looked really great
@RJBWoodTurner
7 жыл бұрын
+Val Borchardt Thank you Val. Regards, Bob
I've recently gotten excited about pen turning, and actually ordered a lathe and some other tools yesterday. Lemme just say, I am even MORR excited about turning pens, now that I've seen your videos! You have really gotten my creative juices flowing about how to make unique stock to turn into beautiful pens! Thanks for that, and please keep those videos coming.
@RJBWoodTurner
4 жыл бұрын
Thank you Andrew, I really appreciate your kind words. Regards, Bob
A lot of work with a great result - thanks Bob
@RJBWoodTurner
7 жыл бұрын
+Lynn Lacey Thank you Lynn. Regards, Bob
Wow Bob, that looks great. Nice job.
@RJBWoodTurner
7 жыл бұрын
+Scott L Thank you Scott. Regards, Bob
As I was watching you make these blanks I was think that this was a lot of fooling around . But now that I see it finished . It was definitely worth it . Really cool looking blank Bob . Great job .
@RJBWoodTurner
7 жыл бұрын
+Glen mckelvey Thank you Glen, It really wasn't that difficult, just a lot of drying time. Regards, Bob
Bob that was beautiful thank you.
@RJBWoodTurner
6 жыл бұрын
+Fernando Contreras Thank you Fernando. Regards, Bob
Let there be light!! 😊
@RJBWoodTurner
3 жыл бұрын
Thank you. This was a really fun blank to make. Regards, Bob
Very cool, thanks for sharing.
@RJBWoodTurner
5 жыл бұрын
Thank you. Regards, Bob
Really GORGEOUS Bob! Another "Keeper" Video.
@RJBWoodTurner
5 жыл бұрын
Thank you Don. Regards, Bob
COOL . Lotas work Bob. Great Lighting
@RJBWoodTurner
7 жыл бұрын
+John horsfall Thank you John. Regards, Bob
BIG thank you for this. As a You Tube video maker myself I know exactly what effort goes into making these video's and I appreciate the time taken to bring us this. I am not a pen turner but I the technique you so clearly demonstrate here will come in very handy in a future projects I have planned. Inspiring video's such as yours are the reason why my TV never gets switched on any more!
@RJBWoodTurner
7 жыл бұрын
+Stephen's 8x6 Workshop Thank you Stephen. Regards, Bob
oh great thanks! 😱 . now there is another one I must try and do. great video. thanks for the inspiration. love it.
@RJBWoodTurner
7 жыл бұрын
+B Lenane Thank you, Sorry for growing your to do list. LOL. Regards, Bob
Tons of work!! great result!!
@RJBWoodTurner
7 жыл бұрын
+Minyong Kim Thank you, Thinking back, it wasn't that bad. Mostly I was waiting for glue to dry. Bob
More and more ideas from watching your videos. Thank you very much.
@RJBWoodTurner
4 жыл бұрын
Thank you Lee. Regards, Bob
Gorgeous! I work with polymer clay and this woodworking is really inspiring!
@RJBWoodTurner
7 жыл бұрын
+Katy Rogers Thank you Katy, I recently purchased a toaster oven and some polymer clay. I'm hoping to give it a try this coming year. Regards, Bob
Its a very nice pen blank and its going to be a great pen and will make somebody very happy. Well worth the time consuming effort. Thanks James
@RJBWoodTurner
5 жыл бұрын
Thank you James. Regards, Bob
Looks good and sounds good to me
@RJBWoodTurner
7 жыл бұрын
+Tom Rowbotham Thank you. Regards, Bob
Great technique, I’d like to try this on some larger pieces too, like rolling pins and Christmas ornaments. Thanks for the video!
@RJBWoodTurner
5 жыл бұрын
That would make a cool rolling pin. If You attempt it, I’d love to see a photo. Regards, Bob
Love it that's a cool technique for segmenting man! Thank you for sharing, hope to try it out some time!!
@RJBWoodTurner
7 жыл бұрын
+Zebrano Wood Craft Thank you. Regards, Bob
Greetings from the old world. your videos are all very good and I've also learned a lot from them. Thank you for everything
@RJBWoodTurner
3 жыл бұрын
Thank you Claus. Regards, Bob
Great idea. I am going to make one.
@RJBWoodTurner
3 жыл бұрын
Thank you Chuck, Please end a photo of you do. Regards, Bob
nice work. I had some cut offs from my acrylics I always save I glued them together all different colors, turned a fun line pen and my wife loves it. she went to the super market all the employees now want one. these types are fun to do and are so unique people go crazy. I've only been turning less than a year. thanks for your channel it helps out alot. 😊😉
@RJBWoodTurner
7 жыл бұрын
+Tim V. Thank you Tim, Anything that looks different and catches the eye people go crazy for. Plus there really fun to make. Regards, Bob
Fantastic looking blank
@RJBWoodTurner
5 жыл бұрын
Thank you Douglass. Regards, Bob
Love this! Nice work!
@RJBWoodTurner
6 жыл бұрын
+Erik Anderson Thank you Erik. Regards, Bob
Great blank, I really like this one
@RJBWoodTurner
7 жыл бұрын
+Mike Fulton Thank you Mike, I'm glad to see your feeling better. Regards, Bob
Looks beautiful
@RJBWoodTurner
Жыл бұрын
Thank you. Regards, Bob
amazing blank Bob, need to try this
@RJBWoodTurner
7 жыл бұрын
+KK Make Thank you Karol. Regards, Bob
Awesome work Bob!
@RJBWoodTurner
5 жыл бұрын
Thank you. Regards, Bob
This one came out fantastic
@RJBWoodTurner
2 жыл бұрын
Thank you, I just made some more of these blanks. There a blast to make.
Bob complimenti...hai sempre delle magnifiche idee...bravo!
@RJBWoodTurner
2 жыл бұрын
Thank you.
Thanks for the inspiration Bob, because of you I been trying all kinds of crazy glue-ups. -Steven
@RJBWoodTurner
7 жыл бұрын
+WigWagWorkshop Thank you Steven, I love experimenting, plus when you do this, you end up with unique pens that no one else has. Regards, Bob
wow, that is amazing a lot of hard work but amazing!
@RJBWoodTurner
7 жыл бұрын
+Amanda Barker Thank you Amanda, It's really not that hard, just a lot of time waiting for glue to dry. Regards, Bob
Great job. I liked the clamping tips and the way you used the tape. I don't use my scroll saw for pen blanks but will have a go at a variant of this next weekend.
@RJBWoodTurner
7 жыл бұрын
+david croft Thank you David, Next to my chisels, my scroll saw is one of my most important lathe tools. Regards, Bob
Well done. I'll have to attempt one of these blanks.
@RJBWoodTurner
7 жыл бұрын
+Charles Massey (Woodchucks1) Thank You. Regards, Bob
Cool! Thanks.
@RJBWoodTurner
4 жыл бұрын
Thank you Thomas. Regards, Bob
love it
@RJBWoodTurner
7 жыл бұрын
+Marcy Cooper Thank you Marcy, Regards, Bob
Very cool. A bit time intensive, but what an interesting blank. Thanks!
@RJBWoodTurner
Жыл бұрын
Thank you Derek. Regards, Bob
Man I love these how to videos. I've never made a pen but I'm getting some really great ideas for knife handle scales. One day I'll have to try turning a pen. I have too many hobbies and not enough time
@RJBWoodTurner
5 жыл бұрын
LOL, I know that feeling. Regards, Bob
Neat! I am glad you decided to turn one so we could see it. Don't be disappointed, using a click kit is a brilliant fix. It will make a very cool pen.
@RJBWoodTurner
7 жыл бұрын
+Tenspeed TheBikeHanger Thank you, That was a bone headed mistake on my part. Regards, Bob
Nice! Reminds me of the Animal Kingdom Lodge at Disney World!
@RJBWoodTurner
7 жыл бұрын
+Todd Taylor LOL, Thank you. Regards, Bob
Thanks mate. My brain hurts after watching all the swapping and changing and gluing. Bloomin' well done though Bob. Take care. Dave Winch (Buddha) Beachmere, Queensland Australia
@RJBWoodTurner
4 жыл бұрын
Thank you David. Regards, Bob
great great love it
@RJBWoodTurner
Жыл бұрын
Thank you. Regards, Bob
Amazing
@RJBWoodTurner
6 жыл бұрын
Thank you Jimmy. Regards, Bob
the extra effort on the glue up made a great looking blank.
@RJBWoodTurner
7 жыл бұрын
+Holly Fry Thank you Holly. Regards, Bob
Wow, Bob, you have taken pen blank making to a whole new level! Awesome design. Too bad about the mishap but looks like you got that covered and congrats on the new lights.
@RJBWoodTurner
7 жыл бұрын
+Ordinary Woodworker Thank you, I'm loving the lights, it's almost like an operating room in the shop. Regards, Bob
Lookin' good!! JimE
@RJBWoodTurner
7 жыл бұрын
+blackemmons Tank you. Regards, Bob
That is super! What a unique look. :) - Heidi
@RJBWoodTurner
7 жыл бұрын
+BlackCat2 Thank you Heidi. This was a fun one. Regards, Bob
Those turned out really awesome. I want to try some of my own segmenting, maybe less complicated for my first time haha
@RJBWoodTurner
7 жыл бұрын
+Kaged Creations Thank you, These weren't all that complicated, just really time consuming because of the glue dry time. Bob
thumbs up thanks for sharing.
@RJBWoodTurner
7 жыл бұрын
+THE CREATOR Thank you. Bob
That was a good experiment and it looks great!
@RJBWoodTurner
7 жыл бұрын
+Bent Tree Thank you. Regards, Bob
@RJBWoodTurner
7 жыл бұрын
+Bent Tree Thank you. Regards, Bob
good lighting makes a big difference. that is one of the coolest looking blanks! stinks about the blow out. hence" trial and error " im sure youll perfect it next go. have a good one bob!!🍻💥
@RJBWoodTurner
7 жыл бұрын
+Joe basementwoodworking Thank you Joe. Regards, Bob
Very cool
@RJBWoodTurner
7 жыл бұрын
+Wayne Brown Thank you Wayne. Regards, Bob
Hey, amazing. I never would have thought of that in a million years. BTW, I made a mistake once, I thought I was wrong and I wasn't. At least you have a fix for it. Keep on Turnin.
@RJBWoodTurner
7 жыл бұрын
+Christian Jensen Thank you Christian, I make lots of mistakes, luckily I'm not to bad at turning them into design changes. LOL. Bob
If that's the only area that has glue on it, you can try knocking out the tube with a 1/4" knockout from the pen dis-assembly kit. I've had some poorly glued tubes come out that way.
@RJBWoodTurner
7 жыл бұрын
+Michael DeLawter Nice idea, I have a set of punches and may give that a try. Regards, Bob
that looks amazing, Bob. With your permission, I may try something similar. ~Scott
@RJBWoodTurner
7 жыл бұрын
+Hoosierchef70 Thank you Scott, That sounds great to me, send me a photo if you do. Regards, Bob
@Hoosierchef70
7 жыл бұрын
RJBWoodTurner I sure will. Thank you!!!
This will be one 4 me 2 try :>) Brilliant idea , Bob :>)
@RJBWoodTurner
7 жыл бұрын
+Neil Raymond Thank you Neil. Regards, Bob
Very interesting, quite a bit of prep time. I don't have all the tools you have so some of the stuff you do I have to be creative - I have yet to make the segmented blanks yet, because I don't have a band saw it has proved more challenging. I've made quite a few of the modified slim lines (I think they are my favorite pen to make and I've done quite a few glue-ups with veneer as well another option on the modified slim lines is to use the stylus conversion kit for the 7mm pens makes a nice light stylus w/pen.
@RJBWoodTurner
7 жыл бұрын
+Dave Roush Thank you Dave, I know you can get creative and find alternative ways to make these blanks. Let me know what you come up with because I get questions all the time about alternatives and I can share your findings. Regards, Bob
hi Bob nice blanks as always cool process! I always liked your videos you do great work. I'm not positive but I think you're cherry veneer is actually quarter-sawn sapele mahogany.
@RJBWoodTurner
7 жыл бұрын
+James Lewis Hello James, Thank you and I think your right on the Sapele. I believe I made that mistake on a past video where I also called it cherry. LOL. Regards, Bob
brillient pen bob. amazing blank. i think aluminium can instead of veneer would look cool
@RJBWoodTurner
7 жыл бұрын
+MelbourneAlan Ooh, great idea. Thank you. Regards, Bob
good job
@RJBWoodTurner
7 жыл бұрын
+Yobany Rodriguez Thank you, Regards, Bob
When I made my modified pen, it was very difficult to remove the mechanism. So I very lightly filed the ridges on the transmission until it stayed in, but was relatively easy to grip the slippery nib and pull it out. While testing the removability, don't insert all the way. You really don't have to worry about it staying together, because during use, the pen is being pressed together. I do like your new blank construction :>) Cheers
@RJBWoodTurner
7 жыл бұрын
+Steve Overton I've also found a small spacer the width of the center band helps. Otherwise you're putting another 1/4" of transmission in the upper tube. Regards, Bob
Hi bob, I don't usually leave comments on videos but I have one piece of advice.you can choose weather or not to take it 😃. When I started making pens very regularly I decided to take the plunge and buy a blank drilling chuck and a mandrel saver, is the best use of money I've found so far other than my carbide tools and my lathe of course. Keep up the good work! -Oliver
@RJBWoodTurner
7 жыл бұрын
+Oliver Andrews Hello Oliver, I have those items but choose not to use them. When drilling on the lathe, the holes are sloppier. Plus with many of the blanks I make, their not square and don't lend themselves very well the the chuck application. Your idea is a good one it just doesn't work for me. Thank you very much for your comment I do appreciate it. Regards, Bob
@oliverandrewsracing
7 жыл бұрын
RJBWoodTurner at first when I started issuing the church I couldn't get any of the holes to drill straight, but then I tried drilling with a 1/4" split point drill bit then finishing up with the brad point 7mm and it is much easier to get rid of a good chunk of the material before Sui the brad point drillbit. Hope this can clear up what I was trying to say -oliver
@oliverandrewsracing
7 жыл бұрын
Using* chuck*
@RJBWoodTurner
7 жыл бұрын
+Oliver Andrews Thank you for this follow up note Oliver, I appreciate the additional information. I will give this method a try and see how it works for me. I hope my previous reply wasn't too preachy, my wife say sometimes I don't answer with enough tact. It's tough to have a discussion with just words, you lose all the inflection and body language that tells the rest of the story. Regards, Bob
@oliverandrewsracing
7 жыл бұрын
RJBWoodTurner I don't want to push my ideas on you either! Everyone has their own way of getting to the end of the maze.im only 16 i make mistakes but I try my best not to. For a future video you should buy some polyester resin and some mica powder and cast some of your own acrylic blanks.i lived in the states for 6.5 years and took for granted the selection of resins and wood, now I've moved back to the uk it's pretty hart to find resin blanks for anything under £7
I don't know why but the jump cut at 5:20 made me laugh so hard
@RJBWoodTurner
6 жыл бұрын
+Leroy_jenkenz Thank you for watching Leroy. Regards, Bob
very cool. that made me think of making something very cool. i think im going to try to make that but not as a pen but a knife. great video.
@RJBWoodTurner
7 жыл бұрын
+Elias Skibstad A knife handle would be amazing. Pictures when finished please. Bob
@eliasskibstad2294
7 жыл бұрын
Ok but it may take a while
@eliasskibstad2294
7 жыл бұрын
almost done with the glue up
@RJBWoodTurner
7 жыл бұрын
+Elias Skibstad Sounds good, keep me posted. Bob
@eliasskibstad2294
7 жыл бұрын
Ok
Bad ass. I am going to do this shit.
@RJBWoodTurner
4 жыл бұрын
Thank you. Regards, Bob
MASHAALLAH khub valo video......
@RJBWoodTurner
2 жыл бұрын
Thank you.
Careful Bob- Steve Good is liable to go out and buy a lathe. Hey. the veneer (4:40) I don't think that is cherry. Mahogany maybe? I like the Cap't Eddie sorta finger point you have been using at the end. Good job! Hope to see you Sat. night at Twin Peaks.
@RJBWoodTurner
7 жыл бұрын
+Dan Valleskey Thank you Dan, I look forward to meeting you Saturday too. Regards, Bob
@Nabaati336
6 жыл бұрын
Definitely looks like rift mahogany to me, not at all like rift cherry
Bob, have you tried to soak your veneers? May be beneficial in assembly and the water will just evaporate and the glue should hold tight and strong as equal as if done dry. I would like to try this out in the spring time (unheated shop up here), I will try just straight cuts vice your sine wave, to see if the pieces match up better. It is a wonderful abstract look. Thanks for taking your time making your video for us to view! Michael
@RJBWoodTurner
7 жыл бұрын
+Michael David Hiltner I've never tried soaking them, never even thought about that. I may have to give it a try. Thank you for the suggestion. Regards, Bob
Bob, if you sprinkle a little salt on the glue the parts won't move when clamping & everything will line up perfectly.
@RJBWoodTurner
7 жыл бұрын
+Fierceflyer55 I've heard that before but I've never tried it. Maybe it's time. Regards, Bob
@melechhaarayot9273
7 жыл бұрын
Fierceflyer55 question... I always wondered, will that deteriorate the pen eventually, especially if it gets on the metal?
I attempted this once, ran into an insurmountable problem and have not gone back to it. The problem the two contrasting colored blanks I started with two radical different densities thus I was breaking blades left and right trying to saw through them. After 3 blades on the 2nd cut I gave up. When I get done playing with your other fantastic ideas I'll come back to this one. Dave.
@RJBWoodTurner
7 жыл бұрын
+Dave Roush I never thought about that Dave, wood densities could play a big role in the success of this blank. This was one of my favorites and I plan to make more, they just look so cool. Regards, Bob
You are well on your way to making inlay banding.
@RJBWoodTurner
7 жыл бұрын
+Big Fat Tony's Thank you. Regards, Bob
Hi there, love this pen so much I may actually attempt something like this... Do you have a picture of a completely finished pen/pencil in this design?
@RJBWoodTurner
Жыл бұрын
Thank you. I turned this blank but never assembled it into a kit. So sorry but I don’t have an example. Regards, Bob
Bob the pen turned out beautifully! Can you explain what a modified pen is and the various modifications you can do to a pen/pen kit? Maybe make all of that a video topic? I watched one of your videos last night which I think was a modified pen as you pulled the tube out after it was finished. What is the purpose or benefit of a modified pen? Thanks Bob. Ron
@RJBWoodTurner
5 жыл бұрын
There really is no benefit, it’s just fun to mix it up and not make the same ole thing all the time. I have a play list of all the modified pens I’ve made. When you’re on one of my videos, click my name and it will take you to my home page. There is a playlist selection on there. Regards, Bob
Nice pen. I haven't gotten around to trying out a modified slim line yet. You have so much time into that pen it's going to be hard to get your money back from it. Segmented are still a good seller for me though. BTW your "cherry" veneer is mahogany. Still waiting for you to make a trip up to Indy...
@RJBWoodTurner
7 жыл бұрын
+Mike Bratcher Thank you Mike, I have called that veneer cherry before and was told what it is, I keep forgetting, old age I guess, LOL. I am coming to Indy, here's the video announcement with all the info. kzread.info/dash/bejne/f41m1riSddLSndo.html Hope to see you at the meet up. Regards, Bob
@MikeBratcher
7 жыл бұрын
RJBWoodTurner that twin peaks is about 3 miles from our shop. We were planning on coming to the woodworking event. Not sure what day. I will definitely consider the meet up you propose though.
@RJBWoodTurner
7 жыл бұрын
+Mike Bratcher Thank you Mike, I hope to see you there. Regards, Bob
a lot of work but it looks great.well done
@RJBWoodTurner
7 жыл бұрын
+Barry Parks Thank you Barry. Regards, Bob
This is like the chaos pattern cutting boards I've seen done I was going to ask if you had ever seen them and if you thought that idea would make a good pen blank I guess now I know
@RJBWoodTurner
7 жыл бұрын
+Barry Fields This was a blast to make. Glue ups were interesting but the blanks hold together well and look amazing. Regards, Bob
@barryfields2964
7 жыл бұрын
RJBWoodTurner after I posted that comment I was thanking it might be easier if instead of gluing up each individual blank maybe it would be easier to make it like a big cutting board and then cut it into blanks on the table saw. Just an idea
@RJBWoodTurner
7 жыл бұрын
+Barry Fields That's an interesting idea. I don't see why it wouldn't work. It would probably be easier too. Regards, Bob
Very nice. Unfortunately at my age I would not live long enough to finish it. :>)
@RJBWoodTurner
6 жыл бұрын
LOL.
Just a thought! IF you were able to start with HDPE tubes, then CA glue wouldn't stick to them. However I strongly suspect that they'll need their centres drilled out. From I've seen locally, they may be available in the right outside diameter.
@RJBWoodTurner
7 жыл бұрын
+DMCwoodworx That my friend is an interesting idea. My thinking cap is on. Regards, Bob
@MelbourneAlan
7 жыл бұрын
brilliant idea
@ronh9384
5 жыл бұрын
RJBWoodTurner Bob there is a company that does sell HDPE and I believe UHMW rods here in the U.S. but I can’t remember the name of them.
Bob was wondering what you call this blank? My first thought was crazy blanks, kinda like dizzy bowl or drunken cutting board pattern. Very cool, the veneer ties it all together. Thanks for sharing.
@RJBWoodTurner
7 жыл бұрын
+John Fisher That's funny John, The directory on the computer and the original video file was called Crazy Blank. I wasn't really sure how to title it. Regards, Bob
You are a great instructor. What sort of daily work do you do?
@RJBWoodTurner
6 жыл бұрын
+Steve Jackson I write computer applications. Regards, Bob
Great process. If someone, me, doesn't have a planner am I 'sol' in terms of making this style of pen? I'm new to pen turning.
@RJBWoodTurner
6 жыл бұрын
I think you could still make the blank work. You really only need some way to cut it. Scroll saw, band saw, coping saw, anything will work. Regards, Bob
it's beautiful. I'm going to have to try this. I just got some leopard wood, some red heart and some other contrasting woods. I will just need to get some nice veneer. I will say though I had the volume all the way up and could barely hear you. do you use a mic or any audio recording device?
@RJBWoodTurner
7 жыл бұрын
+John Biggs Hello John, Now that I have lighting covered, I really need to move my attention to either a mic or voiceover. Regards, Bob
*Dons sunglasses* WHAT SORRY I CAN'T LIP READ! Nice. Use a dowel or chopped up pencils to clamp in the middle of concaved parts at the end, then you aren't putting pressure on one (or both) of the points and can apply more pressure as a whole. You could also use some strips of thick leather or compressible foam (old mouse mats / neoprene) on the convexed side to account for the bow. 12:30 as reference to what I'm talking about.
@RJBWoodTurner
7 жыл бұрын
+Neffers I don't understand, the video has sound when I play it. Is there an issue? Bob
@RJBWoodTurner
7 жыл бұрын
+Neffers Thank you for the info. Regards, Bob
@Neffers_UK
7 жыл бұрын
No no, no faults with the video at all, I was having a lil joke about the brightness of your new lighting (it's great, nice job). The second part was advice about clamping concaves and convexes with regard to small parts and small clamps etc. Apologies, I'm tired.
@RJBWoodTurner
7 жыл бұрын
+Neffers No harm, no foul, I understand, and I always appreciate constructive criticism as well as new ideas to improve my process. Thank you very much. Regards, Bob
Hi Bob, did you build the loft in the background? Did you happen to do a video about it? Looking at doing something similar in our garage. Enjoyed this video...thanks for sharing! Steve
@RJBWoodTurner
7 жыл бұрын
+Steve and Brenda Ball Hello Steve, I did, here's the video link: kzread.info/dash/bejne/kYuZttSIZLHFhrg.html Regards, Bob
A lot of work, but that looks really cool!
@RJBWoodTurner
2 жыл бұрын
Thank you David. Regards, Bob
Those blanks are awesome! I've done some segmented blanks, but nothing that was quite so cool looking at the end. How much do you think those pens would sell for? New lights are probably the most underrated shop upgrade, especially for a youtuber, good call.
@RJBWoodTurner
7 жыл бұрын
+Andrew Helgeland Thank you Andrew, A Slimline with this blank $30.00. The price goes up with the kit choice. Regards, Bob
👍👍👍
@RJBWoodTurner
7 жыл бұрын
+Robert Evans Thank you Robert. Regards, Bob