For More Cool Gadgets Check Out Here: kzread.info/dash/bejne/nquY3NpwmqSpcc4.html

@TechNetworkUK

3 жыл бұрын

Pretty Cool Huh?

@toastyy112

3 жыл бұрын

Your amazing and An OG And Its Really Cool!

@ideaynojodas

3 жыл бұрын

What if you use uncarbonated drinks in a glass bottle with the first gadget? Will it work fine? A friend is asking 🤭

@dashot8334

3 жыл бұрын

Pretty cool comment huh?

@aelbalteza5895

3 жыл бұрын

How to get pretty cool huh

Thanks so much to all of you who have subscribed and turned on the notifications

@Jxrdy

3 жыл бұрын

hello

@VeryTastySoup87

3 жыл бұрын

Cool

@VeryTastySoup87

3 жыл бұрын

I subscribed

@moresubbickbestuff

3 жыл бұрын

Epic premiere

@sandrotabidze

3 жыл бұрын

♥

I can't believe to this day that this channel is still intact in every way after literal years!

@laurabrown8917

3 жыл бұрын

kzread.info/dash/bejne/naJ_29pwZcevmag.html

@TAREGOZA

3 жыл бұрын

Its not a glass of water that will break in 4 years sooo

@theletteralpha

3 жыл бұрын

Ikr lol

@akarshannirwan2261

3 жыл бұрын

@@TAREGOZA why are you so savage?

@TAREGOZA

3 жыл бұрын

@@akarshannirwan2261 cause i live in savana ? I am a zebra no ?

I think for the bottle tap, simply lowering the spigot to be level with the bottom of the bottle would have made it much better so you wouldn’t have to squeeze or jiggle the bottle to get the last bit of soda out. That I think would also help with having to use a push pin to create air holes, because you wouldn’t have to worry about removing the bottle to pour out the rest of the soda since the spigot is low enough to avoid the physics issue

@blehh_mae

2 жыл бұрын

that would just cause it all to pour out way too fast probably

@tehpurplepills

2 жыл бұрын

but then it would require being on the edge of a table etc, like a boxed wine and then you couldn't set your cup down. but unlike a boxed wine, in a flexible bag that doesnt need air, the coke bottle is rigid so you need air to get in or you're facing a vaccum issue, so youll still need a vent to maxiomize flow. like the old gascans with the vent cap, before the new obama gas cans came out that take 5 mins to drain. i wonder how boxed coke w/ a plastic bag would work... the co2 would probably fill up the bag and the coke would go flat quick

@GrzegorzSobkowicz

Жыл бұрын

Or something to increase the air pressure inside, so it's right enough to push all the liquid out.

@smorris281

Жыл бұрын

@@blehh_mae Not true. Plastic water jugs with spigots at the bottom work very well. The people who invented this soda dispenser had no clue what they were doing.

@TheRockinDonkey

Жыл бұрын

@@smorris281 Exactly

Finally, a helpful gadget that will spare me all the hassle of pouring liquid Into a cup, this is so much easier!

I can never get bored of “Pretty cool huh?”

@didaraksa779

3 жыл бұрын

Me to

@redsdemontoh3438

3 жыл бұрын

True

@kiwifruit5154

3 жыл бұрын

It's iconic at this point.

@luhvicee

3 жыл бұрын

Same, it makes my day

@luhvicee

3 жыл бұрын

@swan YES A PRETTY COOL HUH

A redesign for the first one would be easy, you make the spigot level below where the lowest point of the bottle, than put it on secure stand. That way it is still higher, well still works. Also, I would recommend a special item to not only put a hole in the bottle, but act as a seal when you are done.

@N0remacsketch

7 ай бұрын

A tight mesh would probably do it

I started watching this when i was 8, now im 18. Wow, the authentic feel of this channel still remain

If Dave isn't impressed by your gadget, you know you screwed up big time.

@spookyguy8639

3 жыл бұрын

####ing facts

@michaeljunction4088

3 жыл бұрын

@@spookyguy8639 ah, yes. My favorite hashtag #ing

@selever4539

3 жыл бұрын

@@michaeljunction4088 he was censoring the f word btw (not sure if this is a joke)

@michaeljunction4088

3 жыл бұрын

@@selever4539 😲😱ofc I didn't know thanks Mr. intellectual

@RedTheLava

3 жыл бұрын

@@michaeljunction4088 was that really necessary, mr. big brain?

I love the fact you also point out the weaknesses of those gadgets. Keep up the good work!

@DaveHax

3 жыл бұрын

Thanks, will do!

@alexandratorres8267

2 жыл бұрын

@@DaveHax I think that’s a gadget

The silicone can holder was really nice, it'd be fun to have at an outdoors party (cue someone drunkenly tipping everything over and now all the drinks explode when you open them-- great fun)

Did anyone notice the funny badly-written warning label in the fridge @ 3:43? That thing must have been made in China or Japan and Google-translated to English. 'Do not fill the carbonated beverage such as cola, cider (soda pop) and contained particle beverage/sugar and particles which is contained in these beverage may be reason of fault).' Lol

this guy is cool, his videos are so simplistic that it shows us gadgets for food/beverages and shows if some gadgets shown online actually work properly.

“Stop animals falling in your can” Sorry guys, a fox fell in my can again let me get it out real quick..

@somebody22011

3 жыл бұрын

😂

@Dooperbooperlooper

3 жыл бұрын

*trying to drink* The fox in the can: licc

@oxygen2623

3 жыл бұрын

Yea, i need that. Last time i found an elephant inside my can

@itzblueflamez

3 жыл бұрын

That's strange, I found my pug inside my drink🤔

@lilgooch5596

3 жыл бұрын

I found a blob fish in my sprite

I watched your videos for school a few times in science class, I’m proud of you Dave.

@dineshnagarkoti5916

Жыл бұрын

Yeah.

The first gimmick could easily be corrected by removing the stem completely and allow the spigot to be below the exit of the bottle. How did it ever get past testing by trying to sidestep Pascal's Law?

@stevedixon921

2 жыл бұрын

Would need a good base to make it stable, being top heavy and all (maybe a clamp?). Add a one way vent tube suitable for 2L bottles and it won't deplete the bubbles as fast AND not require putting holes in your bottle. Alternative Idea: a pour spigot with one way air tube to let the air into the bottle and stop the glug-glug effect. Less material/complexity.

Imagine closing your fridge when it’s kind of full and coming back to a puddle of milk when you open it

@2ndlittlekingryan654

3 жыл бұрын

Happend to me

@milkylights2

3 жыл бұрын

@@2ndlittlekingryan654 oop - 🖐️👁️

@user-rq5uy4ye5f

3 жыл бұрын

@@2ndlittlekingryan654 F FOR RESPECT

@Flameiscool

3 жыл бұрын

@@user-rq5uy4ye5f f

@Flameiscool

3 жыл бұрын

@@user-rq5uy4ye5f f

DaveHax: If you're having a party- Covid 19: allow me to introduce myself

@iamwhatyouseeinyournightma708

3 жыл бұрын

The Vaccine: Don’t worry reinforcements have arrived!

@oneforvivi

3 жыл бұрын

@@iamwhatyouseeinyournightma708 BAHA

@RonnieMcNutt_Mindblowing

3 жыл бұрын

@@iamwhatyouseeinyournightma708 Vaccine side effects and the few people that died from it: don't worry! Covid-19 reinforcements are here!

@jvangs5231

3 жыл бұрын

@@RonnieMcNutt_Mindblowing vaccines are still safe dont worry!

@Balls663

3 жыл бұрын

@@RonnieMcNutt_Mindblowing The side effects are there for like 2 days

The bottle tops, I remembered my mother buying some, they are a pretty cool concept to keep your drinks from spilling. Though it can still pop off if you’re not careful

3:49 i thought you said someting else i had to read captions

@RIYANISDUMB

2 жыл бұрын

Same happened to me 😂😂

@Wat3r_Cl0ck

Жыл бұрын

Me too XD

@FranciaDelva

10 ай бұрын

Why not try the hair salon?

@FranciaDelva

10 ай бұрын

*GRUMBLES* I MEAN WHAT TOOK YOU SO LONG? SCRAM!

@unknowable1407

10 ай бұрын

Its been 2 years bruh

I’m happy he still posts and is how I remember with the small change in the text (which isn’t big, but I think it is awesome)

@icando.awb.thatsnotaquesti3377

3 жыл бұрын

I agree too

@TeaTabby

3 жыл бұрын

@Mar sab Baron Bleach: Allow me to introduce myself

I love dave he makes it like a tutorial just in case anybody wants to do it for themselves and my goodness "pretty cool huh?" I love it

I have the electric drink dispenser at home, and I can confirm it is really good at pouring drinks!

I've had those can toppers to keep bugs out and they worked great to take cans on the go or at least attempt to stop going flat though it still did anyways after so long.

Man: litterally dying on the ground DaveHax: Pretty cool huh?

@TotallyCleverNotes

2 жыл бұрын

😂😂

'When I say bottle tops, I mean these top parts of a bottle' -DaveHax

@ademoniccat1284

3 жыл бұрын

say top 1 more time and a diddly dang tip over one of those pretty cool huh glass cups

1:14 That's because there's no air pushing the liquid from above. You need to poke a small hole on top of the bottle, then the liquid will be pushed out whenever you pull the lever.

@futuristicgeb226

Жыл бұрын

Yeah that’s what he did in the video

Thank you Dave Hax! I’ve been looking for a solution to pouring squash for my dyspraxic 7yo. He can’t lift and pour the bottles without making a mess! I was thinking about using optics, but worried about his hand strength. These bottle pumps are ideal and I bought two as soon as I saw your video. Thank you 🙏🏻

I still feel like opening the bottle and pouring would be convenient 😅tho all the things shown are cool

Just found out this channel. So good, that I subscribed to it immediately. Don't wanna miss this. Thanks Dave..

I have the bottle pumper thing I thought I could try it and it worked really really really well!

The first phrases I will all ways remember is " pretty cool huh?"

The bottle adapter for the soda can works great for travel since if you knock it over it doesn't spill everywhere. The issue is that it snaps on too snugly, and can be a real pain trying to get it off the can when the can is empty so it can be washed and used again.

@cptbabyface9804

2 жыл бұрын

I thought it was cool when I bought one but I put it on a can and the carbonation built up so much that it flew of and hit the ceiling shattering and sending sharp pieces of plastic flying everywhere.

@zappyapp

2 жыл бұрын

Or you know, just get plastic bottle beverages

@ginajk8857

Жыл бұрын

@@cptbabyface9804 Ooh thanks ..!

@jack1d1XB

Жыл бұрын

Perhaps a silicon version with a hard plastic collar would improve the overall design, 😊

5:16 drip test 😎😎😎

@zeeneya115

2 жыл бұрын

🥶🥶😎💵💎😎💵🥶💎😎💵😎🥶💎💵😎🥶🥶💎😎

I think I know at least part of how we can fix the design of the first drink dispenser to make it work. You give it a base that raises the bottle above where the drink comes out, so that way Pascal's law that causes the second problem mentioned in the video. Maybe the faucet of the gadget can be altered to let air flow in from outside to fix the other issue outlined for the first gadget?

Pretty cool huh never gets old 😂

@the_spider_7773

3 жыл бұрын

Ye but these comments do

@MrRsanjeevkumar

3 жыл бұрын

Lol😂🤣😅🤣😂🤣🤣😂🤣😂🤣😂

I could only imagine putting mentos into the bottle screwed onto the dispenser

@laurabrown8917

3 жыл бұрын

kzread.info/dash/bejne/naJ_29pwZcevmag.html

Found you just last night, watched two videos and have sworn to none everything you've done

I want to thank the creators of these gadgets because I was beginning to feel my life needed more plastic items.

For some reason you haven’t showed up in my feed for like 3 years but I’ve been subscribed for a long time!

@blck4333

3 жыл бұрын

Lol same

"Pretty cool huh?" will never get old

I'd love to see a video to see which of these apppliances you use every day in your own kitchen

youre my favorite channel. youve provided me entertainment during so many manic and depressive episodes. love your channel bro.

It's been quite awhile since I last watched this channel! I loved seeing the quality of the content always high! *The pretty cool huh never gets old that's for sure!*

@ratikushwaha3578

2 жыл бұрын

😰😰😰😰😰😰😰😰😰😰😰😰😰😰😰😰😰

Me Poking holes at bottom of the bottle for the coke dispenser Me 10 minutes later turn it back up and realize what ai have done ;-;

@user-zx2et9lf8y

3 жыл бұрын

Pokemon gotta fuk em alll🎶🎶🎵 nostalgia'

@laurabrown8917

3 жыл бұрын

kzread.info/dash/bejne/naJ_29pwZcevmag.html

Lol “pretty cool huh” gets me every time

It's nice going back to some of these videos and hear"pretty cool huh"

"How high is that?" "Oh about making a pyramid" "Sorry what?" "Yeah it's about making a pyramid high"

I just love Dave’s content so much! Excellent work!

3:25 that’s a genius idea

I actually would use the bottle can-topper to drink Arizona tea cans. Cans, while cool, are kind of a pain to drink from sometimes, and if I'm drinking from a can, I want it to be soda. But you get more tea in a can than in a bottle, and I haven't seen every flavor in bottle-form, either. Hence the bottle-maker. Plop it on, and right away you've got a big bottle of the stuff. Pretty cool (huh), I must say.

6:29 I swear I see googly eyes in the can

for the first one the solution is simple, all they need to do is raise the area that the soda bottle screws into, and have the spigot be leveled with it or be below it, that way the pressure is sure to force it out that way. there could also be an included air valve that allows air to follow behind the soda but doesn't let the soda come out, kinda like how the olive dressing bottles work where they have that second little tube that functions for air flow.

Whats amazing is the fact that he keeps filling the drinks up to the very top without spilling a drop

Me: Comes here to see some cool summer gadgets (get it, cool?) Also me: gets a whole science lesson on liquid and air flow

0:04 dave made a leek joke

Dave if you dont mind me asking, how long does it take you from having a video idea to posting it? This means ordering the items, waiting for them to arrive, recording, editting and posting?

@salmayeasmensmrity6470

2 жыл бұрын

A long time I think

@Jonathan-A.C.

2 жыл бұрын

I’d figure at least an entire month for the whole process, although I don’t imagine that being a particular filled month of work. I also think that he is likely doing these videos back to back, and so he’s able to do more work within a month’s time frame

I like the 2liter pop dispenser especially for people who have a hard time with the big bottle

I acually have a dispenser like the 1st thing, only it has a tube you would slip into the bottle, along with a pressure cap, I think. No issues on air flow!

That has got to be the absolute healthiest bowl of cereal I’ve ever seen in my life.

Dave: if your having a party Covid-19: am I a joke to you

We got one of those insert bottle fountains, they are very good.

I really liked the second one,it came out so satisfying 😄

Who else watches his videos cuz his voice is satisfying

Finally able to catch up on a premiere

@kampfadler87

3 жыл бұрын

Same 😂

“Pretty cool huh?” It never gets old.

Vaše prezentace je uzastna člověk určitě si něco zakoupit děkuji mějte hezké dny ahoj ❤❤👍🇵🇭

A monument to consumerism. A collection of unnecessary crap what ends up lost in a drawer.

@UncleRussian.

3 жыл бұрын

I mean some of the gadgets seems cool, like the can stacking one. And yeah like I gaster said if you don't want it, don't buy it. If the argument is "well they are still produced and therefore waste our resources" well... Not really? Because nothing really is a waste nowday, most things get recycled one way or the other

@rodintoulouse3054

3 жыл бұрын

@gaster in a nutshell oh! Of course I won’t.

@rodintoulouse3054

3 жыл бұрын

@@UncleRussian. free physics lesson that will last you a lifetime: if you put your can standing on its bottom (as designed), it doesn’t roll over. Moreover, you can stack them and evennread the labels to see what’s in them. Pretty cool, huh?

@UncleRussian.

3 жыл бұрын

@@rodintoulouse3054 free spacial awareness lesson that will last you a lifetime: if you stack them up like you described 1) you can only stack so many until they'll be too high to reach for normal people. 2) if you apply too much force via say a human elbow then your whole stack will fall over. With this gadget shown in the video the rubber prevents them form moving and the chance to knock them over is way less. Pretty cool, huh?

@rodintoulouse3054

3 жыл бұрын

@gaster in a nutshell in English, please?

Pretty cool huh never gets old 🔥

for the screw on tap, I suggest the maker of this gadget make a pump with a checkvalve that we can manually regulate the pressure within the bottle. the checkvalve prevents backflow into the pump, potentially spilling everything

4:41 The color choices for those bottle top things are very... interesting.

4:50 can't you just buy/get a straw

@Martin_____________

Жыл бұрын

Is to keep it carbonated

@mariavictoriaantipolo1994

Жыл бұрын

@@Martin_____________ and resealable

I think you need to shake a little bit the soda on the first clip so it can easily flow.

@onaona.

Жыл бұрын

He did that already...a year ago 🤣 You should watch clip to the very end.

Wow! Talk about fixing a problem that doesn't exist!

This guy is so soothing to watch 😂

My grandma had a ton of those lid things and I’ve never knew what they were.

He doesn’t realize but he makes all of our days better

Glad someone is doing the really important work...

'Pretty cool huh'. It never gets old

Me: can i have some cola? Dave: Yes wait a min Dave: *spends 27 mins trying to put in the dispenser* *after he finishes putting the dispenser in* Dave: pretty cool huh? Me: 🙃

@laurabrown8917

3 жыл бұрын

kzread.info/dash/bejne/naJ_29pwZcevmag.html

@aleksanderpaczoski

3 жыл бұрын

@@laurabrown8917 thanks let’s upgrade my rusty kitchen!

The second drink dispenser id actually have in my milk that looks perfect lol

I have the can bottle tops and they work pretty well

the king of PRETTY COOL HUH? finally uploaded a video...i have waited for so long for your video Dave.

0:18operated by this✨ *L E E V E E R* ✨

@FrogMan-cw2jr

2 жыл бұрын

? Edit: it's lever not leeveer

@starl1ght111

2 жыл бұрын

@@FrogMan-cw2jr you missed the joke i know how lever is spelled

@The_real_paill_neverdies

2 жыл бұрын

@@starl1ght111 pronunciation moment

The tap itself needs to be ‘rotated’ around so it points down; that way the drink doesn’t find its own level. It’s a great idea, it just needs some extra tweaking

I remember watching this channel with my little sister and making carved pumpkins

I wonder where he keeps all the gadgets...

I always have trouble with animals crawling into my drinks.

@xjlegoanimations5666

3 жыл бұрын

@@Harison. yeah, but my one is worst, today a elephant jump into my drink

The one for the bugs is sooo helpful.

I was a bit skeptical of the bottle caps, but they're actually pretty useful

2:19 Me: Looks pretty cool, not going to buy one though 3:31 Me: *ILL TAKE YOUR ENTIRE STOCK*

2:11 i choose the khaby lame method

@wanderingviewer8411

Жыл бұрын

Eh that guy is lame sometimes can't even tell the difference between satire and actual stupidity.

I actually have the second one and it’s the best thing I’ve ever bought

I wonder if a version of this where the bottle is mounted higher than the faucet would work better, although it would probably require supports to keep it stable.

So while crisis come's up .Bitcoin climbs lol 😆 Now i say crypto is better than stock investing in crypto should be in every wise individual to do list .

@ladymiriam6105

3 жыл бұрын

Recently, I invested in both stock and crypto but currently i believe crypto is doing more better !!

@jamesbobby3285

3 жыл бұрын

The best thing to do in this period is to buy silver and crypto

@kabumtips6009

3 жыл бұрын

The Rice become richer by spending like the poor and investing Non stop,While the poor stay poor by spending like the rich yet not making any investment

3:30 teenage boys be like

4:35 I have those and they really works. It can be hard to take them off when can is empty (u might actually crush can little)

I imagine walking into this guys house and he is just cooking with a bunch of kitchen gadgets whilst using some figet toys and his entire house is just a bunch of easier ways of doing things XD

I appreciate the fact that davehax puts the links of the products in the description incase we want it!🙂

Me too I can never get bored from PRETTY COOL HUH?