Altroz/Nexon/Tiago how to operate lights| Altroz lights explained in detail
Light Control function of Tata Nexon/Tiago/Altorz
Tata Altroz RHS Stalk Features
A headlamp is a lamp attached to the front of a vehicle to illuminate the road ahead. Headlamps are also often called headlights, but in the most precise usage, headlamp is the term for the device itself and headlight is the term for the beam of light produced and distributed by the device.
Modern headlamps are electrically operated, positioned in pairs, one or two on each side of the front of a vehicle. A headlamp system is required to produce a low and a high beam, which may be produced by multiple pairs of single-beam lamps or by a pair of dual-beam lamps, or a mix of single-beam and dual-beam lamps. High beams cast most of their light straight ahead, maximizing seeing distance but producing too much glare for safe use when other vehicles are present on the road. Because there is no special control of upward light, high beams also cause backdazzle from fog, rain and snow due to the retroreflection of the water droplets. Low beams have stricter control of upward light, and direct most of their light downward and either rightward (in right-traffic countries) or leftward (in left-traffic countries), to provide forward visibility without excessive glare or backdazzle.
Low beam
Asymmetrical low beam illumination of road surface - right-traffic beam shown
Low beam (dipped beam, passing beam, meeting beam) headlamps provide a distribution of light designed to provide forward and lateral illumination, with limits on light directed towards the eyes of other road users to control glare. This beam is intended for use whenever other vehicles are present ahead, whether oncoming or being overtaken.
The international ECE Regulations for filament headlamps[27] and for high-intensity discharge headlamps[28] specify a beam with a sharp, asymmetric cutoff preventing significant amounts of light from being cast into the eyes of drivers of preceding or oncoming cars. Control of glare is less strict in the North American SAE beam standard contained in FMVSS / CMVSS
High beam (main beam, driving beam, full beam) headlamps provide a bright, center-weighted distribution of light with no particular control of light directed towards other road users' eyes. As such, they are only suitable for use when alone on the road, as the glare they produce will dazzle other drivers.
The headlight switch, also known as the dimmer switch, controls the operation of your vehicle's lighting system. This electrical component activates the headlights and tail lights. It may also control the fog lights and other lighting systems on your vehicle.
Altroz RHS Stalk Features,
altroz Indicator,
altroz Turn Signal,
altroz Automatic Headlamp,
Headlight Issue of TATA ALTROZ,
How To Adjust High And Low Beam In Altroz,
nexon RHS Stalk Features,
nexon how to operate lights,
nexon RHS Stalk Features,
nexon Lane Change Indicator,
nexon Turn Signal,
nexon Automatic Headlamp,
tiago RHS Stalk Features,
tiago Turn Signal,
How To Operate tata Car Headlights
How To Operate Car Headlights malayalam
How To Use nexon Lights,
How To Use Your Car Lights EASILY,
How To Use nexon Lights,
How To Use tiago Lights,
how to use altroz lights,
Headlight, tail light, fog lamps, drl in altroz, nexon and tiago
Tata Altroz RHS Stalk Features | Lane Change Indicator | Turn Signal | Automatic Headlamp | Altroz
Tata Altroz RHS stalk has some unique features. What are these features? Find out in this video.