Hey everyone just found out that Minwax has given me at least one prize pack (maybe more) to give away over on my Instagram page! If you want some free Minwax products for your next build make sure you're following me on Instagram @ZacBuilds instagram.com/zacbuilds/

@nosferatuzodd6427

3 жыл бұрын

Good job. Wood finishing is an art form in and of itself. Buy yourself a copy of Bob Flexners "Understanding Wood Finishing" it's a great reference to have around. Also invest in a Domino XL for this type of work and a Lamello P2 Zeta for the cabinet jobs when you can you wont be sorry. Normal biscuits are better than nothing when it's all you have kicking around but the Domino XL or a horizontal morticer and home made tennons cant be beat. Also could do mortice and tennon bread board ends fixed together drawbore pins. Likely would have helped reduce some of the movement caused by the heat from the tourch lol. Either way good content keep doing what your doing brother.

@NovocaineTV

2 жыл бұрын

Meh... can still see those joint lines in the wood. Shoulda done epoxy in the gaps.

@deven6518

2 жыл бұрын

Was the wood treated? Treated wood doesn't char too well.

@deven6518

2 жыл бұрын

@@NovocaineTV I don't think it's the joint be lines you're seeing but rather the mismatch in the grain. The eyes focus on patterns, it's why we see shapes in clouds. If you're joining boards, try your best to match grain

@andyh8239

2 жыл бұрын

I like the flooring; what is it?

Hardwoods are MUCH harder to get the burnt effect on than softer woods, which is why cedar is used traditionally! Pine works decently as well. It also allows the grain to be much more pronounced and you can do some really interesting stuff with soft woods like sanding in-between grains to get really exaggerated effects as it can create little valleys and lots of interesting texture.

@truthnaut7829

3 жыл бұрын

I was always under the impression that shou sugi ban was about making the grain pop out in the 1st place so not sure why he was using the technique to achieve a blackest black look. Also, in my experience Minwax black is more very dark brown and the best way to achieve what he was shooting for would have been to use India Ink to just stain it

@AndrewLaBreck

3 жыл бұрын

@@truthnaut7829 Yeah I get what you are saying. If you look at people doing what he was trying to achieve wit cedar you get this almost dragon scale effect that you can't really get on hardwoods. He didn't achieve that look which is why I agree something like a black stain probably would have done the same thing combined with a good sealer , could have avoided minor warping while getting the same effect.

@michaelalfonso1070

2 жыл бұрын

I learned that too on my first Sugi project, (pine hand cut dovetails with a Maple handle) that Maple didn’t burn, lol!

@joeforHistruth

2 жыл бұрын

Douglas Fir works really well, the hard grain really stands out for a great texture!

@NobodyReport

2 жыл бұрын

I'd also say burning before the glueup would probably help with the gap and warping

Broke my heart when you stained over that beautiful shou sugi ban.

@OutSideTheBoxox

3 жыл бұрын

Me too

@maryannkom299

3 жыл бұрын

Exactly, shou Sufi ban isn’t to make something uniformly black!

@kz.irudimen

3 жыл бұрын

It was already completely charred, I think there was really no point in burning the wood if the client just wanted it pure black. The goal of burning it is to highlight the grain because it burns unevenly ...

@Daniel08353

2 жыл бұрын

@@kz.irudimen not really. Burning it charred black is a protectant from moisture, insects, and fire. Lightly burning it has no form of protection, and is mere aesthetics. It entirely depends on the desired results.

@kz.irudimen

2 жыл бұрын

@@Daniel08353 1. The wood does not need to be burned anywhere near that bad to be protected. 2. This is a desk, good to know that it is protected from insects and extreme weather. It was just the wrong technique for the application and desired results, probably to add popular buzzwords to the title as this is youtube

OK no sugarcoat: It looks Like you just painted a normal desk black.

@51075BIGRIGG

3 жыл бұрын

Yea technically he did, because he burns it then uses deep black penetrating stain. So I’m confused why use stain if the point was to burn it to achieve the look.

@whitetailtherapy7908

3 жыл бұрын

Yeah I mean I guess It probably has a little texture ..But like you said just looking at it just like a normal desk painted black lol

@Gloryofthereef

3 жыл бұрын

You get really nice effects if you stain a color to contrast the black, but clearly the client wanted black. Each project is built for the customer not for yourself. Though that’s not to say you should EVER build a turd on purpose if you value your time.

@scottroy6195

3 жыл бұрын

Agreed here. And put all those coats on it to make it smooth. I don't think shou sugi ban is a good idea for a desk.

@VeitSchenk

3 жыл бұрын

@@51075BIGRIGG lol, that's the first question that popped into my head: why bother with the burn, if it's all coated in a super-black, all-covering stain.

I think that doing a Shou Sugi Ban style project is really cool, but its hard to get the real texture out of something that has a bunch of coats of finish on it. That's why a lot of the Shou Sugi Ban woodwork is used for exterior use like house paneling. Its still really cool though!

I agree with Creig. Would personally have liked to see 4 separate matching shou sugi ban timber legs and integrated storage like drawers. Metal legs look industrial. However, thanks for demonstrating the burning and staining process. It's a real eye opener revealing the lessons learnt.

Simplicity is the beauty of this desk. Great work!

This is one of the few channels I make sure not to miss any of their new videos, and I don't even work with wood.

@ZacBuilds

3 жыл бұрын

Thanks Faissal! I'm right there with you man, I watch tons of videos on KZread about hobbies I don't actually do, sometimes it's fun just to watch the process!

@faissalabsml4393

3 жыл бұрын

@@ZacBuilds Exactly, I just finished the video and tbh, the desk turned out really well, I love the black finish.

I love how you blended the aesthetic which is not exactly functional, but came up with a way to make it functional with great form. Huge win, congrats.

@ZacBuilds

3 жыл бұрын

Thanks Daniel! Much appreciated man

Just a helpful tip. Use a smaller torch, you'll get a more concentrated flame. Tecnique takes a little longer, but this allows you to focus on the wood and not overwork burning it. I have always had good luck getting a nice Shou Sugi Ban finish this way. Happy woodworking Ladies and Gents :)

With "project" if you follow proper pronunciation, you say it correctly. Unfortunately, most Americans don't understand proper pronunciation, and accept common pronunciation. We (Americans) are taught that if there's a vowel, consonant, vowel we emphasize the first vowel. But most don't follow through with that. I live in VA and inherited a Delaware accent so I had to figure out why people thought I talked "northern", that's why

Gorgeous!

I don't have a place to really try big DIY projects, but man do I want to try to build a desk for myself right now. Amazing stuff.

Dude, fist up awesome build skills and I really appreciate your honesty on remembering to seek criticism. It is SO easy to get caught up in yourself, especially here where your friends and fans are giving the feedback. I don't like the desk myself but that doesn't mean it's bad, you've experimented with new materials, gained skill and of course the recipient will love it. I know people have said it but yeah, those legs just don't do it for me, I won't flog a dead horse as others have said it but I will add I didn't really like the mounting hardware. Those screws looked like they were gonna tear out with time and it really could have done with washers to get a good fit. This might be the video speaking, but on camera the finish looks waxy and thick, I feel like you could have used cheap wood, painted and coated to get the same results. Maybe in person it looks different but that's my 2c. Heck maybe skip the Shou Sugi Ban finish and go direct to minwax black? Overall it's been a journey and I know I'll be taking some ideas with me! Love the way you experimented with different things though.

Japanese woodworker for 30 years - "I'm now not a beginner at shou sugi ban"- western youtube woodworker - "I flipped the table over and now got a really good feel for the process" it's a really interesting difference in perspectives going on here IMHO :D Cool table btw :)

Biscuits in long-grain to long-grain joint add as much strength as a water drop increases the sea level.

@ZacBuilds

3 жыл бұрын

I assume it would probably be exactly proportional to the increase in surface area.

That's freaking awesome, I'm totally building one of these desk, but I think I'll use some scrap pine I have. I've done shou sugi ban a few times but I always used resin as a finish. I never thought of using polyurethane. There's a pigment called true fire by black diamond pigments, it's a two tone that when applied to shou sugi ban using resin it looks amazing. It's like a galactic sparkle purple, or that's what I think its like.

Honest feedback: I really enjoyed watching the process, glueing, cutting, sanding, burning, staining. It really adds a lot of value for the owner knowing how much effort it took. I don't know how it _feels_ but the final product _looks_ like a desk from IKEA. Kind of surprised b this outcome -- maybe too many coats making it too shiny?

@tegan71969

3 жыл бұрын

Yep, might as well just go buy IKEA if your own piece looks like it came from there. I would be badly annoyed if people, when referring to one of my custom furniture builds, asked me: "Is that IKEA?!?"

@overphloh

2 жыл бұрын

I totally enjoyed the video, thank you so much for that! Nevertheless I also think it doesn't have this handmade or special character to it. Maybe (hopefully) that's only on camera. My first thought was that the surface looks like black painted wood. I would love to see a black painted (or stained) peace of wood next to the table to see the difference.

@AshtrayAnnie

2 жыл бұрын

It's due to multiple reason. Real Yakasugi is only burnt wood. No oiling process. That the main reason it was done. To seal without oils. The videos I watch of this process on KZread all the idiots do the same WRONG steps. Not to mention Oak is WAY different than Cedar.

@Ben-fk9ey

2 жыл бұрын

Yea definitely took away much of the rustic charm and personality the desk had.

I really wished I had seen this video before I took the torch to my vanity top. That is truly some beautiful work. Two thumbs up. Looking forward to seeing more of your art. Thank you for sharing and the videos.

Patina by vinegar is something I'm fond of.... black on black .... swwweeeeet!

Honestly I really like the look, I can see why someone could prefer timber legs or unstained wood (the two main pieces of criticism here in the comments), but I dig the more industrial look and that color, with some but not too much grain showing. Love it

Next time, if you consider going into such type of endeavor again, you can try epoxy resin: it fills the cracks between boards, self leveling and hopefully will save time on applying coats and sanding

@sambodutch5433

2 жыл бұрын

wont work bro, epoxy leaks like a sieve through the entire table once the wood is burned, it'll come out the other side, i do this kind of stuff every day :)

@fearthesunrise

2 жыл бұрын

@@sambodutch5433 there is loads of videos of resin after burning so it can be done.

@sambodutch5433

2 жыл бұрын

@@fearthesunrise OK, fair enough.

@kesselrunheroj8497

2 жыл бұрын

@@sambodutch5433 best comment

@61spindrift

2 жыл бұрын

@@sambodutch5433 Why not seal the bottom and sides with a quick epoxy, let it dry and then do an epoxy "finish coat" on top? Either that or make a mold?

I appreciate the simplicity of the design yet the complexity of the methods to achieve it

What's cool if they have like a set up with the led lights or "gaming set up" you could use. Wood die on it and it turns out really cool dad build dad channel shows it too. And honest opinion that side table at the end. Ock up is magnificent!

@ZacBuilds

2 жыл бұрын

Neat idea! I'll keep that in mind for the future

Hey man, I’ve become a real fan! I’m new to your channel, and I like how you gave a background story on the history of the style.

Too many compliments and not enough criticism? Allow me to assist you! 😄 Keep in mind that I’m too lazy to attempt this build, so take it with a grain of salt. But anyway, here goes: Those pre-built legs are shit. They’re really ugly, as in low quality ugly. You didn’t give us a close up on the welds, but from a distance they look bad. The parts of the legs near the top that were ground looked gross, too. You should have cleaned up the legs. Use an angle grinder to clean the welds on the feet, then use your orbital sander to smooth/feather the shitty grinds near the top. If you choose, you can create patterns using a palm sander and scotch bright. As far as finishing the legs, if you want that industrial aesthetic, you’re going to want to apply a chemical patina, THEN clear coat it. This process alters the surface layer of the metal itself, and you can achieve a wide variety of looks depending on which scary chemicals you apply.

@joelovestorah1403

3 жыл бұрын

Pretty harsh but the legs were garbage. Ps. You can't blame it on well my friend ordered them because I'm not attaching a turd to my Mona lisa.

@Kaodusanya

2 жыл бұрын

I really wish people would stop using premade legs. Makes the entire build look generic.

I think that your first point on praise is so true in all creative fields!

Yup! He did it again... Something awesome! Geesh! 😂👍

@ZacBuilds

3 жыл бұрын

Thanks Benjamin!

I believe the Shou Sugi Ban wasn't ever intended to be super duper finish friendly. If you take into account the fact that is was used to treat wood for outside the house. So you started with an almost impossible task to begin with. That being said, I also think that applying all those finishes to it, and coloured CA and all of that, it's not really a Shou Sugi Ban desk, it's just a desk "coloured black" in a different technique and then basically painted over and finished, which by the way in my opinion hides the Shou Sugi Ban. I can't think of anything else except some construction beams or something like that used outside, that would've really shown the Shou Sugi Ban.

@lauri.nordling

Жыл бұрын

"Yakisugi (焼杉, lit. 'to heat cypress with fire')" is a technique to char the wood to make it water proof, insect proof (and nearly fireproof). The desk in question is treated with yakisugi/shou sugi ban, and in addition just treated with stain and a finish. It's just like saying you car isn't painted, since there's lacquer on top!

I actually think this desk would look BETTER if the legs had rusted! Imagine that beautiful rust colour with the black desk!

No rust on legs, modern is beautiful and I love the shou sugi ban look. Used it on an outdoor walk way and it has last for years. Plus...no maintenance. LOL.

This was an amazing build Zac! Love the breakdown.

Zac, I appreciate your videos and skill, however, I think this project was a miss. I would have preferred seeing you develop more char and texture in the burning process and then use a shallow pour resin to get it back to level (with that process you could use any wood). I would have also preferred a keyboard tray to clean-up the desktop clutter. The legs were very clunky, but your client chose those himself.

@ethanstine4047

2 жыл бұрын

Amen

Why did it take so long to find your channel. I love the way your approaching telling the story. Great filming and editing! An inspiration for my videos.

@ZacBuilds

3 жыл бұрын

Haha I don't know, but I'm glad you found it now. Cheer man, appreciate the kind words!

looks great!

Dude! How have I not come across your channel before?! Super stoked there's someone making woodworking youtube vids in my city! Looking forward to more!

This is quickly becoming one of my favorite woodworking channels, man. Keep at it!

@ZacBuilds

3 жыл бұрын

Thanks man! Comments like this definitely keep me motivated to keep creating!

I like the life experience advice, and of course you are quite right. The desk is functional and fits in a modern or classic environment. The odd divett , vein or gap gives it a rustic used charm that not every one likes. Its a good solid piece of work and i would mark you 8 out of ten .

Love the history bit about wood burning. Great desk. Cheers fro NZ

@ZacBuilds

2 жыл бұрын

Glad you enjoyed it

I am sure that will inspire lots of DIY after watching this, Also, you will get to asked "Can you do this for me I will pay you" ? 😜👍👍👍 Thank you for sharing

The desk looks super nice, but I believe staining the steel legs black on the grinded spots would be so much better. Maybe even apply some metal wax on it because it feels more natural that clear coat, not to mention that scratches on it won't be as noticeable

@ZacBuilds

3 жыл бұрын

I'll have to give some metal wax a shot in the future! Never worked with it before

@SilverShinepony

3 жыл бұрын

@@ZacBuilds its pretty cool, works wonders on purposely rusted surfaces. I actually even used shoe wax once on my kitchen table and it worked surprisingly

Nice job the desk. I've got an idea about how to fill the cracks or gaps. Now i haven't tried it yet but couldn't you take some of the chard black sawdust mixed with wood glue and if need be add little black die to fill in the gaps. I don't know just a thought. Any hoot, i'm gonna give it a try later and if it works or not ill get back with and let you know.

That's an AMAZING desk and I'm now even more interested in doing some Shou Sugi Ban myself!

I agree with Robyn/Robin, it's a beautiful looking desk.

As a recommendation. Inlay the legs. It adds to the intent and can transform it to piece of furniture, rather than a nice top with legs screwed to it. Blacktail does this and adds a detail that makes his pieces stand out.

@vsemprivet

Жыл бұрын

Excuse me, what is "inlay the legs"?

My friends are too honest if they tell me they like something I make I know it must be good. They’ve only liked a few things.

Dang !!!! That's probably the best looking table that I've seen .. like ever !

I enjoyed the video and am planning a similar project. One technique I discovered years ago from a woodworking magazine was called ebonizing. Wood with a consistent natural pigment can be turned black with a subtle metal glitter by painting on a metal acid mixture. Red oak is usually very good while pine often doesn't change colour at all. You make the solution by steeping steel wool in white vinegar for 24 hours. Remove obvious steel wool and apply the clear mixture to the wood. It will turn black very quickly. Let dry for a day and coat with your favourite finish. I found that any light splotching from inconsistant pigment can be repaired with your same black Minwax .

I really like the look of the desk. Its attention grabbing and looks very industrial which I like. But for what I do and my work flow I think this desk it too small. That being said the look is still on point.

would've look killer with a clear epoxy pour! but given his reaction i think your friend would rather have the wood texture than the clean look of the epoxy.

@ZacBuilds

3 жыл бұрын

I'd love to another one with epoxy, but we had discussed from the start we really wanted to preserve the texture above all else. It really does have any awesome feel to it as is. You can feel the natural grain as well as the crackles that come from charring.

@diegovaldes8411

3 жыл бұрын

@@ZacBuilds i totally understand, i have a desk that i left the wood texture in and finished with poly too and i gotta say, despite the stain and poly finish on top, it's very lovely to feel the wood texture while using it!

@ZacBuilds

3 жыл бұрын

@@diegovaldes8411 I spend a lot of time just feeling the grain of my desk absent mindly while I worked and think too

This is my first time on here and I like what I see. That desk came out beautiful. Hope to see more of ur videos.

The struggle is real, Zac. For one Canuck to another… beautiful PRO-ject

@ZacBuilds

2 жыл бұрын

Haha thanks Kris, good to know I'm not alone :)

The piece looks fantastic, but I would say it's more SSB "inspired" as opposed to a SSB piece. It needs to be charred pretty deeply to be considered SSB. I did learn some things watching this video, you did a great job collectively.

This is the first video I’ve seen from you. The title “your friends lied to you” convinced me to click on it. Your comment “idiots on KZread” made me laugh out loud and immediately SUBSCRIBE! 🤣🤣🤣🤣👍

the desk turned out amazing zac. picked up a new follower my friend. im excited to see more

I learn something new today. Thanks! I never heard of this method.

It looks great. Just wanted to know, does burning the desk really make a huge difference considering you still used a black finish? What would the difference be if i just use the minwax without doing the shou sugi ban?

@johngardiner8847

2 жыл бұрын

Nothing.. the burning was a waste

The desk top is really nice, 10/10, but I think you should have painted the legs, the grinded areas really show through and it's not great. Seen a few of your vids now, just subscribed :)

@ZacBuilds

3 жыл бұрын

I hear you, and I offered to paint them for Robin but he loved the unfinished look and frankly I kind of do too. It's a style, but obviously not one thats for everyone.

Loving your work and channel. Cheers to more!

@ZacBuilds

3 жыл бұрын

Thanks Jerry!

Willing to have this in my home when I move in a few months. I will definitely be building one for myself. Thanks for sharing!

I'm so glad you addressed the "project" pronunciation. I always knew why you pronounce it that way, but I'm British and by God did it bug me 😂

@ZacBuilds

3 жыл бұрын

Just wait until you hear how I say aluminum 😂

@BuxTruxNTiddyFux

3 жыл бұрын

@@ZacBuilds ah I'm used to that and there's a fair argument for that pronunciation. Buoy is the worst one 🤮 haha

The link to your Instagram in the description leads to a dead end, just a heads up :)

@ZacBuilds

3 жыл бұрын

Oh crap, better fix that! Thanks for the heads up

I'd happily have that in my home. I absolutely adore that finish.

Great project video, liked seeing the challenges and how you over came them. That colored CA glue was a great solution on the fly.

The table is awesome but the legs could be improved, the legs finish is very uneven from the factory u could have sanded the legs first and then finished it with clear coat. I think it would look nicer. + u do say project weird. 🤣

@ZacBuilds

3 жыл бұрын

This was actually a discussion that Robin and I had, but he really dug the rough industrial vibe of the unfinished legs and that's why we left them as is with just a clear coat to prevent any corrosion

BISCUITS DO NOT add strength! I ate them for a month and my bench press decreased 😫

@ZacBuilds

3 жыл бұрын

😂😂

Well done, Zac! I've never tried burning a table, but I did try dyeing some red oak a pure black and it was a huge pain! Can't wait for the next one

@ZacBuilds

3 жыл бұрын

I'd really love to do this again and sand back the char because the oak underneath the char turned this really cool purple red color. But ya if you want pure black I highly recommend this minwax stain, I think it'd do a great job on non burnt red oak too

finally a new build video!

I love the finished product. Simple and sleek and fits the room very well. You have given me a few ideas for how to handle some of the issues I face with my projects too so thanks for that. :)

In a few words: I gonna build THAT!

the correct name is YAKISUGI (焼杉 in japanese) 焼く: "yaku" means to burn 杉: "sugi" is cedar "sho" is the onyomi pronunciation of the same character, the original Hànzì pronunciation of the character when introduced in Japan. "sho" may be used in other japanese words, but not in this case. 板 "ita" is board, "ban" is the onyomi pronunciation. 杉板 (sugi-ita) means "cedar board​". but the technique name is YAKISUGI.

Excellent!!!!! I’m doing the same finish but with blue accents on my ceramic egg cooker table that I just built. Also thanks for keeping it real and safe for you and your friend during Covid! 🏆🏆🏆🏆🪵 🔥

Great job, a lot of it. The finish worth it, it is just beatiful. Congrats.

This just solidified my desire to make a desk like this. now to get a blow torch...

@ZacBuilds

2 жыл бұрын

You're gonna have a great time! I think I linked the I used in the video description, it was cheap on Amazon and got the job done

Awesome content dude! This was the first video I've seen from you and I subscribed to the channel right away. Keep up the great work!

omg that desk is stunning :)

Honestly, that looks really good. I myself have a love for black furniture and I would be very happy to have this in my house. Fantastic work Buddy 👍👍

Can I comment on biscuits? My understanding is that the primary purpose of biscuits is to add strength to otherwise weak joints (they actually swell when glue is applied for an even stronger joint). The reason people say biscuits are only for alignment is because you don’t need the added strength of a biscuit when gluing long grain to long grain (I hope I’m remembering my terms right). So it does add strength to the joint, it’s just unnecessary strength making the primary use alignment.

@ZacBuilds

3 жыл бұрын

Oh I 100% agree with you. But many people say "biscuits don't add any strength" which I think is a misinterpretation of the fact and it gets parroted a lot online. So I wanted to try and clear things up, but maybe I should've been more specific.

Love the desk mate well done

I believe what a lot of people mean by "biscuits don't add strength to a joint" is confused with "biscuits don't add as much strength as dowels". Which, I tend to agree with. You get almost equal surface area for your glue, but more rigid structure. Either way, great watch. I am new to your channel and will continue to chime with thoughts. Keep it up.

The desk looks great ! I would accept it :)

Very refreshing to see watch man 🔥🔥🔥🙏🏾🪵

One of the best Woodworking channels. Thanks for the content !

@ZacBuilds

3 жыл бұрын

That comment put a huge smile on my face, thank you!

Nice very good job, a beautiful table clean lines simple and elegant.

I like that you took a traditional 'outdoor technique ' and applied it to this project. Super unique and experimental, and it taught me a lot about blackening/texturing a hardwood surface. I think it has a deeper, more textured look than just painting. There's still some intrigue to the wood that you wouldn't get if you just painted it.

That is an amazingly beautiful desk! OMG, I want one!

Super nice and minimalist table!

They say feedback is a gift, first time viewer of your work and now subscribed.

Again a really good video!! Keep up the good work Zac!

The one thing I would add to the desk is some sort of cable management cradle and passthrough to the table legs would make the setup waaaaaaay much cleaner look.

Hahaha, Zac, this video is classic.... KZread algorithm highlights this video for me, and the first thing you say, the problem with "friends" is that they lie to you... I can be brutally honest with you.... ask away...😆 🤣 😂

Very good!

I agree about the biscuits, they do add some strength and nice clamps! Wish I had that when I built my butcher block island.

I have started doing some Shou Sugi ban at home for my gardening boxes and outside platforms! I never even thought about making some interior stuff!! The project looks soo nice, would had loved to see some way or addon you could had put to 'hide the computer cords or put an inside power station. GOOD JOB I am happy I found your channel!! =D

Hello my friend, Congratulations on the project and the smart way of working that hides great experiences. See you. Big greetings.

The finish came out beautifully!! Loved the angles you put on the edges. Personally, I'd have built something with drawers but it seems like the decor in it's final spot was more suited to something very clean and simple. Nice work.

"But before I tell you about that, lemme tell you about the sponsor of our video..." *Oh yeah!* That's what I was waitin' for!

I was waiting for the upload ;)

I love it!!

@ZacBuilds

2 жыл бұрын

Thanks Geri!

Besides the legs I LOVE this desk. I would definitely want something very similar to this in my own home office