It's nice to see you working the way most people have to, no lift and laying on the floor. Goes the show you don't need fancy equipment to do high quality custom work.

@alfredoibarra9825

2 жыл бұрын

Without safety glasses too! Always regret it when the odd piece of debris makes it’s way into my eye/s but still don’t wear them. 😆

@jackdaniels2657

2 жыл бұрын

Honestly as a diesel mechanic working on semi trucks I don't know many shops that actually have truck lyfts. Everything I do is on the floor clutches differential reseal engine over hauls brakes suspension. I'm talking semi trucks like Peterbuilt kenworth freightliner. Honestly working on the ground is actually easier then a stupid lyft. it's also faster then a lyft anyone that thinks mechanics working in a shop is easy is clearly inexperienced. I mean most mechanics do side jobs on the weekends and when me as a diesel mechanic I do road calls out of a tiny truck meaning I fix the trucks that break down on the side of the road. Most mechanics while doing side jobs generally don't have air compressor or a lyft we do it the same way as any other person just trying to get their car running the difference is we have much more knowledge on how to work without fancy shit I mean primitive tools. There was a time when lyfts didn't exist ND u just worked on the cars cus it's fun

@Blackinterceptor999

2 жыл бұрын

Other than the expensive scan tool he doesn't have to diagnose and fix the electronic issue...

@joshcrosland8733

2 жыл бұрын

@@alfredoibarra9825 Same.. Mine were on my head under my colorado im ls swapping and a random waterfall of fuel came out of the feed line into my eye hahaha

@brucelee2554

2 жыл бұрын

Like they work in India. The oil contaminating the water system. Eventually, it all ends up in the water system.

so glad the AWD conversion is finally done. Who all is going to LS Fest in Vegas next week?

@Grinstedracing

2 жыл бұрын

Ill be there

It's the bcm. You should be able to unplug everything 4wd, yank every 4wd fuse, including the front diff fuse, and disconnect the battery for 10 min. When it powers back on and sees nothing from 4wd it then ignores it from then on. Same deal with the 2500 burbs auto ride. It's fully electric, not air, and has to have a ton unplugged, removed, etc. If you don't do the bat reset it goes into theft mode.

@gregthemechanicman

2 жыл бұрын

all joking aside you know this for a fact? does it also disable all the 4wd codes that will be thrown or does it actually disable the entire system alltogether and the ecm and bcm just play along and not store codes for missing modules, actuator codes etc etc? and what years is this verified on? seriously interested. is this like the 10,10,10 trick to "reprogram" gm ecus from the junkyards into another car without having to get the key programmed,vin number and all that jazz? i also heard you can do the 10,10,10 trick and as soon as you start the car/truck for the very first time and you yank the bcm plugs really quickly and it basically just turns off security alltogether .. havent verified that last one yet but i did hear something like that.

@davemcdaniel4856

2 жыл бұрын

@@gregthemechanicman I know it for a fact. I've done it for the 2500 suburbans on 5 2000 to 2002s. First one I did went into theft mode. You can also reprogram the bcm with the rpo codes using a tech 2 and you don't need to worry about the trick. However the trick only works for deleting things, if you add something to the system it has to be programmed in or all hell breaks loose. I was explained by a gm tech it was designed as a failsafe mode that when all signals are lost from an onboard system, if in an emergency, you can do this to get it home.

@dickbrugh5562

2 жыл бұрын

@@davemcdaniel4856 Yup! I’m a GM tech too. When things are taken out that the bum is programmed for, it doesn’t like it. Some of the older bcms, you can use the tech 2 to unselect options thus fixing any issues from removing or unplugging components.

LT, I really miss the real Power Block and all you guys doing the projects, I looked forward to it every Saturday. I am stoked I found your channel and have been a faithful fan ever since. One of my favorite projects was Project Red Tide, this truck is a perfect homage to it! Cant wait to see how you do at LS Fest, Keep up the great work!

@lawabidingdad

2 жыл бұрын

Wow I just realized he was on powerblock with Stacey

@jayroberts636

2 жыл бұрын

They have a channel on Roku

@ItsDaJax

2 жыл бұрын

@@lawabidingdad I don't think he actually worked with Stacey. Stacey left in the mid00s, right before Jesse and Ian started Extreme 4x4.

@LawrenceTolman

2 жыл бұрын

Correct, never worked with Stacey, but heard plenty of stories!

Im glad you explain in detail the trials and tribulations, the decision making process etc. great video. Im working towards 80e and AWD swapping my own 03 RCSB 4x4 and watching your videos gives me a little what to expect when i dig into my own project. Thanks man

@Pitman556

Ай бұрын

If the transfer case is manual with stick on the floor can the original 4x4 front differential work?

@banginracing

Ай бұрын

@@Pitman556 yea that would be the oem set up, floor shift t case is meant for a 4WD front diff

@Pitman556

Ай бұрын

@banginracing awesome. I didn't know if the manual tcase front differential was any different from the electric tcase. Was hoping I would just need the nvg149 and the front driveshaft. Not the front differential

I chuckled at the "Don't spill" when you nearly flipped the drain pain over.

I'm excited to see how many neutrals the 4l60 comes home with. Lol

@LawrenceTolman

2 жыл бұрын

As long as I can make one or two good passes down the quarter mile, I can winch it on the trailer for all I care

@joshsiebold1419

2 жыл бұрын

@@LawrenceTolman full send is what I like to hear!! Good luck 👍

@Apolloneek

2 жыл бұрын

It'll probably have pnnnn.

@doc221978

4 ай бұрын

My bet is on PNN3N1 for gears. The sun shell is a known weakness.

This reminds me of a truck GM High Tech Horespower mag did in the early 2000's. It was a plain white truck and hurt a lot of feelings. The transfer case was the awd/denali style.

I'm actually happy to see you working on your back, under the truck like normies. The vloggers that buy lifts and say, "See, you can do it to", are just so uninspiring. What you're doing is truly inspiring even if one doesn't have a garage.

Man, I can't wait to see this thing rip! That is an ideal build for a mini truck. Hope the times clean up with the AWD Swap!

@ItsDaJax

2 жыл бұрын

There was a channel like two years ago that did an awd and manual swap on an s10. You can get a lsd for those, too.

I still like calling it the "Tyclone". Cool build though!

My pro charged Silverado SS AWD is amazing. First AWD truck I have had. I put Nokian snows on it and it is a rally car in snow while hauling my sled in the bed.

So funny to see a'guy do all that work to a truck and be all kinds of upset about a security light 😂

@scottleggejr

2 жыл бұрын

Out hooning and interact with a Utah LEO and explain it... Drive it like you

I'm popping popcorn to read all the posts from the know it all's.

Great job, LT....and nice truck! You make things look very simple.

My arms are shoulders are sore just watching you. Good work👍🏿

Looking forward to some AWD donuts!

@LawrenceTolman

2 жыл бұрын

me too!

Very cool LT can’t wait to see how it is with that conversion and the new wrap

Killer build! I've been watching every episode of it

You throwing that much power at that 4L60 with no tire slipping as a cushion IS GOING TO GRENADE FAST!!

@LawrenceTolman

2 жыл бұрын

if it does, it goes. We've got a 4l80 ready to replace it!

@shadowopsairman1583

2 жыл бұрын

🙄

I figure those 4.30s were a good call, it's a good compromise with an overdrive. Sounds in a happy place there.

@LawrenceTolman

2 жыл бұрын

Yup, I’m loving the 4.30s

Love the build! Keep it up, man!

I've been wanting to get a Tech 2 myself. I heard the Chinese ones are just as good as the name brand ones. I have enough GM vehicles that it's worth owning one. Also, I've found that key on(10 mins), key off (10 mins), key on (10 mins) then off and start sometimes will clear security issues that I can't work around with HP Tuners!

Can’t wait to hear about your LS Fest and how well your truck did good luck!

Can't wait to see the COPO at LS fest! Stoked for you.

Great video LT! Looking forward to seeing the wrap next!!

@LawrenceTolman

2 жыл бұрын

Coming soon!

Great video LT!

I had never even heard of the viscous coupler AWD transfer case till I looked it up to see how it works. Fascinating stuff.

Love the fact you are still laying on your back and doing work like 85 % of us are good stuff should be killer ,I have a 93 gen 4 I've thought would be killer all wheel drive

Great work LT I know how you feel wrestling the TC out I did the same on the ground to fix pump rub on my 246... great effort

About 11 minutes in... I can remember similar struggles with the transfer case remove and replace I did on my 2003 Silverado SS. Arm up over the frame brace, saying "OK,,,, rrrrrppppp eeeeeppppp oooooorrrrrgggghhhh, WHEW!" It was like watching myself back in time LOL! Have fun!!!

So glad I found you, look forward to more content. Best wishes!

@LawrenceTolman

2 жыл бұрын

Thanks so much!

In love with this swap. I'm wanting to do an H2 transfercasr in a denali lol 😆

Nice good job you make it look so easy !!

Man, LT, I love this kind of stuff. I'd love to someday turbo charge my 2014 Tacoma. Maybe someday..... Keep up the great work man.

Built an 01 SCSB stepside AWD Turbo truck back in 2012, fun truck.

Love this concept.

Guys this guy mean business no joke and most of his job is better than buying new parts when he make his own parts

When I did my manual transfer case swap in my 2000 Silverado, I grabbed the harness from the fuse box to the transfer case from the donor truck. Then you don't have all the plugs possibly wrapping up in the front shaft and/or ugly zip ties

Glad it that security light is off.. keep up the good work I will keep watching

I never questioned why as for a long time I've wanted to create a modern Typhoon out of a Blazer Xtreme as I never thought I'd have gotten an actual Typhoon. Swapping the 2wd frame for a 4x4 Blazer Zr2 frame and converting to AWD, turbo'ing the 4.3L V6 and even try using the GMC Jimmy headlights and grill with the Xtreme bumper. Although now I have my Typhoon.

6:20 "Hey Farva what's that place you like to eat at with all the goofy s*** on the walls?"

Loving all these videos LT! I always wanted to do a similar swap, glad you’re the guinea pig!! Haha

That looked like so much fun pressing that diff in place! I was waiting for the rust to drop into your eyes, sorry.😝

Enjoying this build! Maybe you can get some average mpg and of course trap speed times with the 4l60 & compare to the 4l80. Good stuff here!

Might be time to look into the QuickJack. You can get them up for to 7000lbs and are half the price of a full lift.

You’re really good on camera. It’s like you have experience… wait a minute! 😂😂😂

I can't wait to see it with the 4l80!

Great video, by the way, what is the number of that extra capacity (long) AC oil filter ?

You gotta wonder why GM didn’t just use a simple Torsen center diff rather than a viscous coupling type. Can send whatever % of TQ to whichever diff can take it… no clutch to wear. Toyota has been using this system for many many years.

@werks96

2 жыл бұрын

They did, its called the NP120 and it uses a helical center diff that's much better (in my opinion) than the viscous type. I used one on my S10 awd build. I have a video of it on here.

When you were replacing the 4x4 switch with that little opening, I was wondering if you may have forced an issue by unplugging while the key was on. Not sure at all, but that's what I was thinking.

@LawrenceTolman

2 жыл бұрын

that did occur to me after the fact, it probably didn't help. I should've disconnect the battery before doing anything

"Nice time to get a cramp" hahaha been there!

This truck is slowly but surely becoming bad ass. This channel should be way bigger than it is, mabey a collaboration with other KZreadrs would get it out there🇺🇲🏁

I love how you still use matco tools, reminds me of you in power nation

Project "black tide" lol

@LawrenceTolman

2 жыл бұрын

exactly. and this one I get to keep

@AjarZzzz

2 жыл бұрын

@@LawrenceTolman and an nbs too so even better!

@GMCJay_lly

2 жыл бұрын

@@AjarZzzz thats debatable

@AjarZzzz

2 жыл бұрын

@@GMCJay_lly true!

This actually isnt the first one out there, maybe as a stepside bed model, but I've seen a few. And its the best idea ever...

Cyclone reborn, Good shit. can't wait to see her rip.

Salúdame, Te conocí por PowerNation en Español 🤭 en especial por el vídeo del Viper vs F-150 ambas Tuneadas, Me encanta tu programa (en español) porque aprendes de automóviles pero bien explicado paso a paso, Otro ejemplo cuando construyeron el Camaro 92, Muy buenos programas, El que más me encantó fue el de la Ram 3500 modificada porque no cualquiera le mete mano a un Diesel para correrlo en competición para meterle 1000 hp

@LawrenceTolman

2 жыл бұрын

thank you for watching, I loved building the Ram 3500 Cummins diesel truck, that was one of my favorite trucks!

Why do this? Because you're the man damn it! You're killin it! Fantastic idea and thank you for sharing!

Respect doing all of this by yourself.

@LawrenceTolman

2 жыл бұрын

thanks!

very interesting swap.

I had a 2004 SSS and loved that truck. I always felt GM missed an opportunity when they did not make a SCSB SSS. I excited for you over this build it hold a special fondness for me! Good luck and I hope the transfer case goes on as easy when you get your 4L80 swap in.

@tjmoneybags

2 жыл бұрын

I don't understand your abbreviations. Can you explain?

@revolutionautoworks777

10 күн бұрын

@tjmoneybags hes saying 2004 SSS ( It's Silverado SS) they were Awd. General motors missed the chance to produce a SCSB (Single Cab Short Bed) SSS ( Silverado SS).

Dude , you need belltech sway bars and street performance shocks at the very least . Or atomic fabrication coilover conversion for the front

@LawrenceTolman

2 жыл бұрын

I actually already have the atomic fab coil over setup, just haven’t installed it yet

@jamiehernandez4378

2 жыл бұрын

Awesome! That’s probrably my next phase . Belltech sway bars ( for the ss) we’re a huge improvement on my 4x4 crew cab I think with the 800 lbs less weight of your truck they would be a good bit better

On the security problem. Depending on what the computer seen. You have to go through so many valid key operations. Basically just use the factory key multiple times starting and driving it. But this is the coolest truck being built on the net right now. Good job on it.

The coupler in that transfer case is a bear to find. I had mine rebuilt by a guy on ebay and it has been working perfectly for the past 5 years since the rebuild. It only needed rebuild because the chains had stretched and needed replaced.

One of my favorite builds. Aside from that red obs you built

It's a awesome build.

Another thing great about using the awd setup....NO electrical gremlins...

Take the bulb out of the security light 😂

@michaelsimpkins631

2 жыл бұрын

It's not really alight it's a small message screen.

@jonathanafrica3150

2 жыл бұрын

@@michaelsimpkins631 oh damnit I forgot those had the message screens. I’m stuck in the 90s with my car lol 😂

props for doing this work without the benefit of a car lift!

Maneuvering and installing the front differential on my 2000 Escalade was one of the most physically demanding jobs I’ve done.

You losing your hair is a side effect of being a god dammn genius you are a legend LT . this single cab build was epic bro that root supercharger sounds so freaking mean I love that wind

@LawrenceTolman

2 жыл бұрын

hey if that's the reason, I guess I'm ok with losing a little hair

Instead of swapping in the 4L80, why not do a 6L80? GM sells a kit to run behind the gen III engines, I’ve sold a couple and had real good luck with them. I put a 6L80 in my 99 when I done the gen IV LT swap

LT I've been watching this series cause I'm in the middle of a 04 escalade AWD project. Waiting to see how you incorporate the 4l80 as that's my plan eventually. It's going to be a stroked 5.3 with a single turbo

That's a bit of heavy lifting from the floor 💪 😳 ouch. But worth every but of effort put into the project once done. 4:30 ratio is pretty good for the 4l60e. Not sure what 1st gear is for 4l80 but I bet it's a good ratio. Have a good week !

@allanb3222

2 жыл бұрын

1st gear ratio is 2.482, for the 4l80E.

i got a question i have a manual shift transfercase 261 can i put a awd front diff and use the 261 transfercase as selectable awd?

If I have a 4x4 with a floor shift and 5speed manual trans, if I were to do this conversion would I be able to shift from 2/Rwd to Awd with the floor shifter..??

That pocket that you put in there would be a great place to put the stock 01-02 escalade traction control button... use it as a momentary switch with a latching relay for a scramble button or something.

I have an 88 Chevy Stepside I want to air ride lay frame and go all wheel drive. I bought a 94 Z71 I'm stripping for the frame. The main issue is making the driveline work. I am also swapping the rear suspension to an independent suspension. The reason for the IRS is suspension travel without having to add the large hump in my bed. This will make the bed appear stock while still allowing the truck the lay low and even lay out at the show. I also have a 98 Dually that wont stay running. All it will do is start then die in a second. The engine and transmission was swapped from another truck.

2500/3500 frames are only missing a couple front mounting brackets. Converting from auto to manual is very easy. Already got 4 conversions done and still on the road. Yes cruise still works

@sethh8892

2 жыл бұрын

What transmission would you use for a manual swap? With the T56 transmission found in the Corvettes work?

@frostybandit1

2 жыл бұрын

@@sethh8892 NV4500, it can bolt up to the 6.0L/ 5.3: engine block. This same transmission also bolts up to the die hard Cummins 5.9L. Very easy to self rebuild the transmission. You just need to make sure you get a NV4500 that is setup for GM applications. Also make sure to get the cross member for the manual. T56 is good if your aim is a fast cruiser/ burnout maker.

@frostybandit1

2 жыл бұрын

@Lawrence LT Tolman @@sethh8892 with these years the gear ratios 4L80E compared to NV4500. 4L80E ratios : 1: 2.482 2: 1.482 3: 1.00 4: 0.75 R: 2.077 NV4500 gear ratios 1st = 5.61 2nd = 3.04 3rd = 1.67 4th = 1.00 5th = 0.75 R = 5.04 Manual can work with heavier loads than automatics. With a manual trans the system can operate without issue just running 110amp alternator. Automatic systems need 130amp+ alternators. Engine will also run cooler as it is not having to cool the trans as well. Compared to automatic no power is lost between engine and the tires. You don't have to worry about automatic doing the shift panic when you are between gear hauling going uphill. If you plan on staying with the 4L80E then do every cooling upgrade you can. Two to four quart extra capacity aluminum deep dish pan for transmission. These upgrades work for me; Tru-cool model# 47391 , Cool Case model # GMT569A , TSI model# 4L80DPK-A .

@sethh8892

2 жыл бұрын

@@frostybandit1 I'm pretty sure there is power lost between the engine and the rear tires regardless of what style of transmission your you use, this is simply due to basic laws of thermodynamics. There is always heat generated from the transmission and therefore that means there is energy transfer, which means there is energy lost from the load of the trans. But I can definitely see a manual transmission being more efficient, as it's not relying on fluids, only direct gearing.

@sethh8892

2 жыл бұрын

@@frostybandit1 Also, this is going to be for a race application. I've never heard of the NV4500, do GM vehicles have these stock? Or are they just conversion kits?

Will this conversion work on a 2002 Silverado that has a manual 4x4 transfer case?

Commenting for support

I love your videos! I have a 2004 awd suburban I am wanting to lsa swap. Not sure how my tcase will hold up since it is the (nr4)

Awesome 👌

LT would more weight in the rear of the truck bed keep the wheels from spinning so easily?

Nice truck ultimate sleeper

@LawrenceTolman

2 жыл бұрын

I love it!

I believe you can set that light to no error reported with VATs disabled and the security light should go off. Maybe I am misremembering but I think that is how I did that. I assume you pulled the battery cables for a couple hours?

with that GM communications network if I remember right, there is a start and an end. I think some networks loop, but anyways with that if you delete a module from the network depending on where it is in the network you might end up deleting another modules communication to the network or even several modules by accident then also some modules need to be reflashed to no longer communicate with the module you have deleted. all modules still connected to the network will set codes saying they have lost communication with the modules disconnected and the modules disconnected will not communicate because they no longer have a path to the data link connector. it sounds like you have a broken link in your communication chain and that may be fine for what your doing or you might run into communication issues. pull up a diagram of the communication network and see if anything has to pass through the 4x4 module.

Wow still has the original front rotors i see. Only last a few years up here in the northeast. I would replace those bearings in the AWD front diff and check the threaded adjustment locks. They always go bad in the AWD vehicles somewhere after 100k and ruin a case half when they spin out.

More than likely your theft deterrent problem is due to you moving the column to remove the 4wd switch. There are 3 small wires that plug into the sensor at the lock cylinder case and they will cause issues. You MAY be able to find the issue at the terminals where they go into the connectors, check both ends. Honestly I never actually FOUND the issue, I would just always replace the ignition switch which comes with that harness.

Yeah I think the BCM didn't like stuff being unplugged with the key on and after running and driving it then realized it's okay

It’s not the only one in sure there’s plenty more but swiped truck is one

Get a VATS bypass module. If you are going to mess with Chevy's it's worth having a couple around. I think I paid $25 on ebay last year.

A little piece electrical will fix that light. Haha🤪

Did you go in to system on hp tuners. Special options. And then get rid of break talk. Traction control. Whatever else you have on there?

That t-case gasket residue is a nightmare isn't it? 😂

I think the procedure to relearn key is key on for 10 mins then cycle switch to off repeat 3 times. The truck prob saw 3 successful key cycles then reset its self. Ignition switches are kinda finiky. Awesome swap! My wife loves her 03 Denali 6.0 awd

@beetlebuilder5882

2 жыл бұрын

If you are already tuning the vehicle with HP tuners then why not just disable the VATS?

@Randomgearhead

2 жыл бұрын

@@beetlebuilder5882 who steals gm junk anyways lmao!

Bro trust me and believe me you’re not the first all-wheel-drive single cab 😹😹 With some boosted application🤣🤣🤣🤣

@LawrenceTolman

2 жыл бұрын

Well I did qualify that statement with all wheel drive, lsa supercharged, and stepside. And I don’t mean four wheel drive either, that doesn’t count. true awd swapped trucks aren’t all that common.

AWD. This thing is so awesome.

Truck is phukn sick man, hell of a job.

@LawrenceTolman

2 жыл бұрын

thanks!