Just wanted to leave a comment to say that this video was very helpful when I was trying to resolve a top fan error on my son’s R10. I wound up getting the same fans & thermal paste that you used & the replacement job was a breeze thanks to your instructions. The only minor neg was you fast forwarded past plugging the new fans into the mobo. I used the Y splitter to plug both top fans into the TOP 4-pin connector but was wondering if it would have also worked if I plugged one fan into TOP & the other into CPU. Anyway, very informative video. Thanks!

@clickssticksgaming

2 ай бұрын

Thanks for the comment! Did you check out the full walkthrough video as well? Around the 32:00 mark I went through the fan connections a bit slower. The top fans (if you're referring to the new radiator fans), should be driven by the software (either Alienware or other software) to cool the CPU directly through the pump/radiator combination. If your motherboard has a CPU fan connection, it should be utilized for the radiator fans, and not plugged into the Top fan connection. I utilized the Top fan connection to chain the front fans together, to operate as one. You would not want to separately connect the two radiator fans into different fan connections on the board, as they would then be controlled differently from each other, when they should be controlled the same. Hope this helps!

@yojironin

2 ай бұрын

@@clickssticksgaming Ohhh, I missed the full walkthrough vid. Like I mentioned earlier I wound up chaining the radiator fans to the TOP fan connection cause that's what was being used before. So far it seems to be running ok but maybe I'll open it up again sometime and switch it over to the CPU connection instead. We still have only one front fan (connected to the FRONT connector on the mobo) cause we do have a regular 3.5" HD taking up the spot that the 2nd fan usually goes into. I tried moving the HD to one of the bottom tray positions but couldn't get it to fit properly.

Hi there, I am trying to update my cpu from 3600x to a ryzen 9 5900x like the one you have on the same motherboard and alieanware R10 , but it just not recognize it, can you give some tip to update bios or any helpful tip please, thanks in advance.

@clickssticksgaming

4 күн бұрын

I don't know that I'd be able to offer much help, as I hadn't upgraded the cpu in that PC. Are the 3600x and 5900x's the same socket size?

@alejandroparedesvelasquez1868

4 күн бұрын

@@clickssticksgaming yes there are

It's liquid cool but the temp is insanely high!! I replaced my top and front with noctua, changed my CPU fan cooler to Kraken 120, and the temp is constantly in between 40 to 50 degrees Celsius. Maybe the liquid cool isn't functioning? Cause that temp looks like only the fans are working... I mean, I overclocked my pc to 3800 MHZ along with higher voltage, and replaced my ryzen 7 3700x to ryzen 9 3900x. And this is the temp.

@clickssticksgaming

Жыл бұрын

If you're seeing 40 to 50C temperatures on the CPU in an Alienware PC like this when it's working hard, you are doing amazingly well and should have nothing to worry about. For comparison, my recently built PC with 9 fans and lots of open space in the case will see temperatures in the low 50C range when working hard.

Any chance you can post the exact fan links for Amazon?

@clickssticksgaming

4 күн бұрын

Here you go. Links used to be active in the descriptions but they seem to have disappeared. www.amazon.com/Noctua-NF-A12x25-PWM-Premium-Quality-Quiet/dp/B07C5VG64V/ref=sr_1_1?crid=V8H6OPQ58D2Z&dib=eyJ2IjoiMSJ9.573JgZEPpl8QUSfke-uaaorVnlpkFOJvLaRg417w7kGTeVYNn19_f8wZ2bPY_gkBLG5ZGh-N91KaW6NBIgM8BlAf35HL_os7l406BpO_whum2y4SNVr5DagxJcbKvsGytipmdySuGqUHnRWxBXE4hvMwPrOop4QhR9oWO-hEfIY4lqcUYADRVk5IDUwOTwwcNSNM2QQWTUD2IAJ-c7vU12m4racLoTuwNx9YsggDSdo.wXaQWIJG9w_19uOQf_8_L60EZ6JVsv0yU1x18yhcST8&dib_tag=se&keywords=Noctua+NF-A12x25+PWM%2C+Premium+Quiet+Fan%2C+4-Pin+%28120mm%2C+Brown%29&qid=1722120156&sprefix=noctua+nf-a12x25+pwm%2C+premium+quiet+fan%2C+4-pin+120mm%2C+brown+%2Caps%2C297&sr=8-1

W TOP FAN....!!!!!