Tony you're a life saver, thought I had to take the whole dash out😂

@vialettotony

3 жыл бұрын

Haha. Hope it helps. All the best and thanks for watching.

i have a little industrial deafness..never had a problem with vibrations in the dash....THEN i had a hearings aids, on the drive home all i heard was rattles and dash vibrations:):)

Great video Tony, keep them coming please! I have that annoying rattle, going to give this a try.

@vialettotony

3 жыл бұрын

Thanks Neil. Appreciate the positive feedback. All the best.

Thanks Tony Good Job

Well done Tony, another great vidio(I have subscribed)

@vialettotony

3 жыл бұрын

Great, glad you like it. Thank you. All the best.

Worked for me too, I had to remove and isolate the plastic below the steering wheel to, it’s fantastic now

Great, thank you!

Excellent content simple fix…

Unreal! Thanks Tony. This worked (eventually). I tried a number of times using different types of felt / foam tapes. But still was getting the vibration at low revs. Realized eventually that one of the corner clips had bent out of place by a couple of millimeters so wasn’t clicking in properly. Gently pushed the clip outwards and tried one more time with tape similar to this video and noise was finally gone! Very happy

Great job tony!

@vialettotony

3 жыл бұрын

Thanks JP. Appreciate every comment and view. All the best.

That's the culprit then ! Thanks Tony !

@vialettotony

3 жыл бұрын

Haha.... damn thing right. Hope it helps. All the best.

Thank s Tony you are the men sr

@vialettotony

3 жыл бұрын

My pleasure. Thanks for watching 😁

I was wondering, how this cover is removed, since my is also rattling from time to time. Will give it a go. Also what I like is to put some fabric tape (used to insulate wiring looms) on the edge points where plastic touches other plastic/leather/vinyl, etc. Had quite good success with it on the plastic body of the window steering panel and decorative trims, where it did remove much of the squeeking, etc.

@vialettotony

3 жыл бұрын

Hi Michal. Applying the tape was not a problem at all. It worked really well and is still keeping it quiet. Hope it helps. All the best.

Hello Tony; Excellent videos! Could you make a video about the replacement of the Clima temperature sensor on the mirror? I think it is a common problem that I have and the garage told me that I have to replace the whole mirror...

@vialettotony

3 жыл бұрын

Hi Steas. Thanks for watching. Really appreciate it. I’ll add it to the growing list of videos... I don’t have a problem with mine, but I should be able to do something to at least show how it comes apart and goes back together. Might be a while, but I’ll see what I can do. All the best.

Thanks Tony! Just picked up my Guiletta a couple weeks ago and was experiencing the rattling noise. This video helped fix it. 👍 My Alfa makes a beeping noise when you unlock and lock it, any way to stop the beeping noises?

@vialettotony

2 жыл бұрын

Hi Connor. Congratulations on your new car 😀. The beeping is standard on all Giulietta, and even Mito’s I believe. You’ll soon start to hear other peoples 😉. The only way of turning it off is by changing the vehicle settings to Belgian I think it is. Most new owners worry what their neighbours will say, but I’ve never heard of anyone getting complaints in nearly 9 years of ownership. Hope that helps. Thanks for watching and subscribing if you have. Really appreciate it 👍

@franciscgedeon9237

2 жыл бұрын

To answer the beeping question, the only way to get rid of it is using a diagnostics tool (MES for example, and the yellow cable adapter) to reprogam the alarm to a different county - usually Netherlands works to permit silent locking of the doors. For this you need to contact the dealer and ask for the alarm security code, if you find a nice person they'll do it over the phone, sometimes they ask for 30 quid fee and proof that you own the car (V5 would do), sometimes they don't. Most dealers refuse to do the job themselves, but you never know. Once you get hold of the security code, it's easy peasy with the software. Caveats: This is NOT the security code for the car key fobs that you'd need to program/cut new keys, NOR is it the radio unit security code, dealers will confuse them, the Alfa dealer software will pop the right alarm code base on the car VIN, you just need to know what you're asking for and stick to it. Also this won't change the way your alarm behaves, you still get the theft protection, it's just the annoying door beeps that go away, so no need to go talk to the insurance provider. Hope it helps.

I had lots of vibrations on Fuse cover, under steering wheel. some teeths were broken and i just stick foam on edges

@vialettotony

3 жыл бұрын

Great job. If you can identify and fix a vibration it makes all the difference. Thanks for watching and subscribing (if you have). Really appreciate it. All the best.

Hi, i did exactly what you did but the rattles still there on its more into the left side of it/ in front passenger seats ? Any recommendations?

@vialettotony

3 жыл бұрын

Get someone to go out with you and help pinpoint it exactly. Then you’ll know where to start looking. Difficult to say otherwise. Thanks for watching and subscribing (if you have). Really appreciate it. All the best.

@sabilbazarghan4326

3 жыл бұрын

@@vialettotony i’ll do that ! Thanks for the tip👍🏻

I have the same issue. It's time to fix it. But I think that the problem in my case is much more complicated, because probably the main engine mount should be upgraded to newer version. Do you ever think to change the engine mount in your Giulietta? 😁

@vialettotony

2 жыл бұрын

Hi Red Ford. Not currently, but at some stage I really want to. Maybe this summer?? We’ll see if people keep watching, liking and subscribing I may be able to afford parts 😂👍 All the best 👍

@Red_Ford

2 жыл бұрын

@@vialettotony I will start with changing the coolant container because it is full of micro cracks and the fluid slowly dissapear. Some people say that this is another common issue in Giulietta.

@vialettotony

2 жыл бұрын

@@Red_Ford remember to look out for the Opel/Vauxhall equivalent for a reduced price 😉. I believe it’s exactly the same item but the Opel one has an extra bracket that needs removing before it will fit. All the best 👍

@Red_Ford

2 жыл бұрын

@@vialettotony You mean coolant container? In my country we have only Opel instead of Vauxhall 😉

@vialettotony

2 жыл бұрын

@@Red_Ford ahah I see. Sorry I thought you meant the EGR cooler. No the coolant expansion tank is bespoke I believe. Have a great day. All the best 👍

Thank you Tony, really interesting. If I may I'd like to ask why the music behind your voice? I'm a really deaf old sod and the music makes it hard to hear you.

@vialettotony

2 жыл бұрын

Hello Andrew. Thank you for watching. Really appreciate it. I always add music to lift the videos otherwise they can seem a bit slow and dull. The audio levels can be a challenge though as when I edit the videos the music doesn’t seem that loud to the point it can hardly be heard, but then when it’s played back through as different device it seems louder. I’ve played with it a bit on different videos making some quieter/louder. Ideally I’d like to get some editing software that allows me to change the levels in each scene, but as ever there’s costs associated with that. I really enjoy making these videos, but it’s quite expensive with parts and tools and I’m yet to earn a single penny from it 🙄. Fingers crossed I’ll find a work around one day. Thank again, stay healthy and enjoy the rest of the videos. 👍

@andrewcumming4018

2 жыл бұрын

@@vialettotony hey Tony thank you for replying. The music thing is only a frustration since I lost my hearing acuity. I truly enjoy ur videos and I don't even own a car. I love Alfa's and my last car was a mito. I enjoyed it but it had the twin clutch and I want a manual next car. I live in outback Australia and Alfa's here have a terrible reliability reputation. My mito was great no problems. I'm seriously thinking of a guiletta, 1.4turbo. The clover leaf is very exy here. I'm only looking at secondhand cars. Being retired I have no idea how you presenter's get money out of your videos, I'm assuming it's to do with numbers. You make all the videos so interesting and achievable. Thank you and I wish you well.

@vialettotony

2 жыл бұрын

@@andrewcumming4018 that’s great feedback to hear you enjoy the videos even though you don’t have a car currently. Thank you. I always try to document each and every step to make it clear, and get lots of comments from people who have successfully fixed or maintained something which is always good to hear. I find the Giulietta very easy to work on to be fair. Really appreciate your time watching and commenting. Thank you again. All the best. 👍

Do you know how to turn off the locking beeps on the car without a computer? Sick of getting in from work at 1am and waking up next doors dogs for the next hour 😂😂

@vialettotony

10 ай бұрын

It can done through diagnostic software, but requires you to configure it to Danish I believe. All the best 👍

Same problem

@vialettotony

3 жыл бұрын

It’s amazing how many people have the problem and put up with it. Hope this will help. Thanks for watching. All the best.

@plandeka666

3 жыл бұрын

I have vibrations in the roof above the gauge cluster. Anybody with the same problem? Only when the car is cold and it's cold outside. Maybe the engine mount under the electic box it's faulty?

@vialettotony

3 жыл бұрын

@@plandeka666 yes I’ve had a vibration there before, but difficult to find as it’s only been once or twice. If it gets worse I’ll try and fix that too 😉.

who would of thought one little bit of plastic make so much noise!