Lucky guess! I once worked on an old VCR from the mid 80s that recorded and played back in black and white from tapes, but passed cable signals thru in color. It was weird, but the same cause applied: old thick brown flux that was caked up on the board. A few wipes with alcohol, and presto! Color was restored. Sometimes it's the simplest things that can cause the weirdest problems.

Infact I like those Reel to Reel players. Back in 1987 when I was 13, a friend of mine invited me to his party and he had a Reel to Reel. I was astonished! I thought it was a computer. And the sound clarity, perfect. I was given a reel to reel player in 2013 but I donated it to a friend.

What a cool project. Really enjoying this Akai vid.

Good progress !!! I'm glad you figured it out.

Nice job! Tapeheads is a great resource! I'm about to repair my Teac RTR!

@MsMadLemon

6 жыл бұрын

Yes it is, I used to be a member there.

Great work. Disturbance from flux happens. Love from Sweden :)

I know that feeling of "OH MY GOD IT WORKED!"

I know this video is old but great work!!! I have the Gx-260D with the blue meters and that counter belt is HORRIBLE! to service compared to the several other machines I have. Is it still playing well? I find that at 3-3/4ips (9.5 cm/s) that the Gx-260d, 265d, Revox A700, A-77, Philips N4520, and Akai gx-747 are leaders! Keep reelin!

Most motorboating issues are related to record /playback switch. I suggest you spray some switch cleaner into it . Nice to see it's working !

I have an Akai Gx260 device sometimes that does not respond to the operating command and when checking the voltage connected to the electromagnet the pickup responsible for it, I found a reading of the voltage zero when it does not respond and when the voltage responds it is 24v What is the reason in your opinion 

Hey Maddi, the thinner belt will last as long as the thicker one, some decks I have put the thinner belts showed less wow and flutter believe it or not! Most likely there was metal stuck in the flux, sometimes happens from wicks. If the tape rubs on the reel you took the table off on you might be able to get at the screws from the side, hate to have to see you take the face off again! I thought it had to be something with the work done, never thought it was switches, glad to see you did get the caps in right!

@MsMadLemon

8 жыл бұрын

Hey John, I'm actually not having any trouble with the belt installed, no wow and flutter. It seems that someone's already been inside here at some point and replaced. But I have the thin one as a spare now :o) When putting it back together, I took special care when re-assembling this thing, reels play fine, there's no rubbing, the only thing left to do is the transistors and calibration. The switches may have sorted out the issues which I was having before opening this up. Things that didn't work before are working now, one of them being the auto reverse and it now records in reverse mode.

@johnstark5324

8 жыл бұрын

Good deal! Can't wait for the next installment!

Conductive flux residue??? Sometimes it's the simple, odd issue's we don't think of, and that catch us out. Very happy to see you got it fixed, nice one.

@MsMadLemon

8 жыл бұрын

I think it may depend on the type of flux, there are apparently a few types from what i've read. The people from the tapeheads kept pushing me to clean switches, with regards to the cause of the issue being something simple, they were right, it was a similar issue. And thanks! i'm so relieved to have this fixed!

Up to part 4 now, but first: I love your orange fan in the background! And question time: What's the music on the tape? First thought was 'Music Sounds Better With You' by Stardust, but it's not!

@MsMadLemon

7 жыл бұрын

Thank you! i'm glad you're enjoying :o) and I believe it's the song which inspired Stardust. It's Chaka Khan's Fate kzread.info/dash/bejne/l3qFxqWLgceZqco.html

Excelente, me suscribi

Hey there, I've purchased Mecano's "Those Revolutionary Days" a while ago, really great band :)

It's aliiiiiiiive!! :)) (when I heard the heartbeat like sound :D)

@MsMadLemon

6 жыл бұрын

you just reminded me of Johnny 5 from Short Circuit haha :oD

@GabrielAndroczky

6 жыл бұрын

I need iiiiinput! :)) Love that movie.

good morning I have an akai 280d ss but it doesn't turn on, I already checked the fuses can you help me to make it turn on? thank you

Hi!, can you help me? my gx210d in play comes out intermittent and regular sound, what's the problem?

For the hard to get loose screws. Set screw driver in the screw and tap on the end of the screw driver a few times with hammer.

Is that one of those nasty RIFFA capacitors (they have a clear plastic casing) just below what looks like the recording switch on the pcb board that you cleaned off the flux residue.... I have seen Dave Jones touch on this topic and replaced them with MPK capacitors... Apparently they are even worse than electrolytics...

Hi, I have a problem with my gx 260d, one of the channels is playing very low in relation to the filter, the technician made an adjustment and the problem changed sides, I read in other blogs but from other models that it may be a transistor problem, if you can help me with this problem and find the cause

@SDsailor7

2 жыл бұрын

Were you able to fix the problem?

Very well I liked .I see all your videos . Beautiful hugs

how you wire/set the light/bulb?

So it was flux residue on the board that caused the motorboating? Flux can become conductive if it absorbs water from the air for a long period of time. Good job fixing that! That was definitely a "weird problem"!

@godfreypoon5148

8 жыл бұрын

Sometimes even without absorbing water, in the case of several newer types! Not handy at all. I didn't even think of this one. Shame on me, because it has caught me out a few times!

@MsMadLemon

8 жыл бұрын

I didn't either because I've always been told by people that flux is not conductive, it can not be the flux. Yet over time read from three different sources that it is possible for it to decrease resistance between pins. This flux mystery! maybe it affects sensitive components such as transistors more.

planning to buy one, found it in jordan

You’re awesome…🤪👍

ok maybe a little odd comment...but here it goes anyways: Im just amazed you actually attempted this....my sister would just say is that an ancient toaster or something? Did you study electronics? I just cant wrap my head around that a women would do this...ok thats sexist i guess so blame me i deserved it=) Amazing job though! (I have two 260D myself that im to chicken to open lol, both need recap...)

Top !

😍😍 nice

Cool

Reel to reels are a pain in the butt to work on...

@MsMadLemon

8 жыл бұрын

Tell me about it!

@yupimbackk

8 жыл бұрын

For me everything. i messed one reel to reel up so bad i almost had tears in my eyes,

Happy to hear it is fixed! But, sadly, your machine no longer has this song built in: watch?v=MCk8Mbe-2HY

@MsMadLemon

8 жыл бұрын

Hahaha ;o))

@SDsailor7

8 жыл бұрын

BRAVO!! exelente trabajo!!Saludos/Rob

@SDsailor7

8 жыл бұрын

Ahora a disfrutar de tu RTR.

@MsMadLemon

8 жыл бұрын

Muchas gracias Rob! Ya estoy disfrutando mi RTR jaja I´ve been recording a lot lately. Saludos, Maddi

@SDsailor7

8 жыл бұрын

Que bien, que bien ahora si disfrutando los frutos de tu trabajo. Saludos/Rob

Gorgeous lady x

excellent video get some sleep. lol

@MsMadLemon

7 жыл бұрын

Thanks lol

Отличная девушка.Супер!!!

HELLO THERE ... 4 SECTIONS FOR MONITORING THIS DEVICE .. FANTASTIC.... THIS VIDEO MAY BE VERY MUCH. THERE IS ANY QUESTION I WANT TO INTEREST ABOUT THIS EQUIPMENT. CAN YOU HELP ME. THANK YOU VERY MUCH IN ADVANCE..

At 2:23 I hope not either!

i love you , i love you , i love you ..lol

Hello Do you have instagram account?

@MsMadLemon

8 жыл бұрын

Hi, no I don't have.

@ahah1785

4 жыл бұрын

thats creepy dude...