Great job, Trevor. Looking forward to more great content in 2023. Wishing you and your loved ones, a great 2023!

Really enjoying this content! thanks

Looks like a nice cassette deck. Know it to be a bottom of the line model but made intelligent choices about where to spend the money, basic functions but well constructed in the important places.

I found one at Estate sale for $30 bucks. It turns on and plays, but sound is very low. I cleaned the head and pots. The VU meters work.

Trevor, at 40:00 I didn't understand you showing the shut off mechanism. I understand how it works, but FF did not shut off and stalled the mechanism. So the belt that drives the worm-wheel was slipping ? Or did even the motor stall ? Could be that some secondes video has gone lost in the editing. And about de-magnetising: you don't always do it for the PB/R head alone, but all the steel and iron around there, like capstan, erase head, screws etc..

Happy New year to you too!

@TrevorsBench

Жыл бұрын

Thanks! Hope 2023 is good to you & your family

Great to see what you were doing. Interesting. Very informative. Thank you.

Hi. First off, thank you for posting this. I've gone and bought one of these for USD 60 in India. Though it hasn't reached me as yet, as far as I can tell, it seems to be working alright if the video is to be trusted. Could you please let me know where I can buy a set of belts and pinch rollers from for the future?

Great video. Thanks!

You'll know when the belts have had their day when the auto stop doesn't work anymore..i had the pinch roller replaced on mine as well..40 odd year old rubber isn't the best

Good work 👍

@TrevorsBench

9 ай бұрын

Thanks!

@Fardeenfarwest

9 ай бұрын

@@TrevorsBench you're most welcome. Thanks for sharing. 👍

Hi there Trevor, very informative and educational

Hello, engineer, I opened this model to replace the belts, but I chose the 800 milliampere fuse, the fuel fuse was 1 ampere, the motor cycle was very slow, and the meters don't turn on, the end of our work, please guide me.

I am currentl working on one I purchased at the Goodwill for $5. I followed all you steps and it works wonderful now. However, I need to replace the belt to the flywheel and can not find the right size anywhre. Any advice

Trevor you should do a Mitsubishi DT-156. Bunch on ebay. Auto changing tape deck.

Enjoyed the elec. motor rebuild, not too fond of this brand, FM Tuner (2600 Their upper end model) and they cut corners with quality in strange places.

How many inches is the decive

I have akai csm02 but it didnt working. Then i opened the machine last day and i saw belts were down. I replaced them but on top wheels belt didnt there i tried to play cassette and it plays good but idont understand what does under big wheels belt to top do? You are replacing here 33:22

@mahmutkaan

Жыл бұрын

Is it timer start and auto stop function? i dont get it. Can you help sir?

Отличная работа!👍 Хороший аппарат, есть у меня такой в коллекции, отлично работает! Видео тоже есть на моём канале!)

I don't understand why you would take the chance on possibly 40 year old belts to save 10$. If I was the customer, I would be upset that you took the whole thing apart and didn't replace them. They are eventually going to fail.

@Poppinwheeeeellllllieeeeez

Жыл бұрын

The entire unit is worth $25 at a local thrift store. I hear what you are saying, but why bother.

@williamholman5162

Жыл бұрын

@@Poppinwheeeeellllllieeeeez You find this type of shit at local thrift stores???

@wang_.

Жыл бұрын

@@williamholman5162 yea its pretty common to find some nicer cassette decks at thrift stores, i had recently found an akai cs f11 deck that needed a auto stop belt replacement for 16 bucks

Trevor .....part 2 on the hk? Or is it done and dusted? Im really not a fan of led mods. Looks cheeseball to me. I save belts when possible by boiling the kettle and letting them eat the heat while im working away. The rubber renew smell and chemical works great but make me want to puke and it lingers. I am surprised you have not been reported yet.

@TrevorsBench

Жыл бұрын

Belt is on order for the ST-7 I will follow up with a part 2 sometime in the future. Don't be sniffing rubber renew, that stuff will give you brain cancer

You have to get oil into the bearing, you do that with a vacuum for a few hours, oil in a bath and the bearings into the bath and then a vacuum, but before that they have to be cleaned, you do that with an ultrasonic bath to clean the small holes the oil located in, it is about 5-10% of the weight of the bearing that is oil from new. The model that was sold here in DK, which is similar to the one you are sitting with, had a metal position and not ferrochrome, funny that there is that difference between the models.

I guarantee you if you take that belt and you dunk it in a hot hot water and let it sit there for approximately 60 Seconds and you take it back out and let it cool down to the temperature of the room without helping it cooling down you don't want to flash quick with cold water just let it go cool down in room temperature the elasticity of the rubber will come back I've done that trick many a time when I was not able to get the right belt for the tape deck and that belt went on to work for several years more and did not break down as a matter of fact you can get this stuff called rubber restore liquid after you do the treatment of the belt with the hot water you take this stuff called rubber restore and you coat the belt with it and you let it dry and you put that on there and that belt will last you for years and this way you have a working tape deck while you're hunting for the right belt cuz a lot of times it's hard to find the right belt for the machine and then what happens is a lot of times these companies will go out of business and somebody else will come up and make those belts in the future and you'll be able to get a belt to fit your machine

@TrevorsBench

Жыл бұрын

The belt was fine. It has enough traction to stall the motor.