Airbrushing for the beginner step by step with your 2024 ultra
Тәжірибелік нұсқаулар және стиль
7hi everyone welcome back to another Airbrushing step by step with your 2024 ultra
enjoy the video guys see you in the next one links below to artwork and products
thanks for watching dred fx custom paint
artwork
pin.it/PSD0VNHrX
fw inks black
www.amazon.co.uk/Daler-Rowney...
isopropyl alcohol
www.amazon.co.uk/Trade-Chemic...
posca paint pens black and white 0.7mm
www.amazon.co.uk/Uni-POSCA-PC...
transfer tape
www.amazon.co.uk/LLPT-Transfe...
airbrush
harder-airbrush.net/products/...
Пікірлер: 35
These tutorials are priceless, man !!! The amount I’ve learnt and got to say, loving the ultra, and Fw inks,,, .. thanks Rob, we really do appreciate these videos..
@dredfxcustompaint
18 күн бұрын
Your welcome glad you enjoyed it 👍
There's not a thing I can say that hasn't already been said. Great piece and a great tutorial..
you got me hooked on Inks especially FW. The way inks spray are so smooth I just love them. I have learned more off of your videos than i have in the last two years of many diferent content artist here on YT. Thanks and its much appreciated.
@dredfxcustompaint
16 күн бұрын
Me to love the inks 👍 really appreciate your feedback and support with the channel 👍
Great job getting mic.. It sounds way better..
A super video as always you are a Great teacher and super talent👍💥
@dredfxcustompaint
18 күн бұрын
Thank you really appreciate your feedback and support with the channel glad you enjoyed it 👍
Thanks for the upload, the tutorials and all that. Really you've already been a huge help in learning how to use the airbrush. I have started using a test paper off to the side and I set the setting where I want it to be to get the result I'm looking for on the airbrush. Then I turn it once more to a larger setting and I try to feel the trigger more and not bump into that safety thats on it. I caught myself the other day using the airbrush nicely and I was on wide open. I forgot to put it back on 2 which is what I wanted after doing a change in colour. Thanks bud.
@dredfxcustompaint
18 күн бұрын
Your welcome glad you enjoy the videos thanks for the feedback and support with the channel much appreciated
Great video Rob learning so much. Love the Ultra 24. What shields do you use and do you have a link to them. Keep up the amazing work and helping us newbies master this craft
@dredfxcustompaint
18 күн бұрын
Hi your best bet is to have a look at Airbrushes.com they have loads of shields on there site 👍
Great video Rob. Don’t have the Ultra but may get one. My main problem is getting paint mix and pressures set up. Plus I’m still having problems with a grainy effect and If I pull back more I get spider. Gonna have a break from it today and just try experimenting with mixes and pressures tomorrow. Don’t want to spoilt more pictures. I also need to check the needles as I have been ham fisted with them when starting out.
@dredfxcustompaint
18 күн бұрын
Which paint is it grainy with Cyril 🤔
@Cyril-eu4gf
18 күн бұрын
Createx illustration Rob.
@dredfxcustompaint
18 күн бұрын
@@Cyril-eu4gf are you mixing with water 💧 I think you may need to strain it before you put it in your brush If that's getting grainy
@Cyril-eu4gf
18 күн бұрын
Yeah mixing with water and the paint must be well over 2 years old. It’s giving the same effect as though the air flow is being cut off.
@dredfxcustompaint
18 күн бұрын
@@Cyril-eu4gf yes definitely try straining it
Another painting that you have nailed it totally awesome, that main handheld shield you use where did you get it from please?, I've tried looking everywhere the curves on it just look perfect. Stay safe and mostly stay strong!!
@dredfxcustompaint
18 күн бұрын
Hi they are really old your best bet is airbrushes.com
@gazgazist
18 күн бұрын
@@dredfxcustompaint much appreciated I did find something close on Pinterest perfect just printed it. Fanx for answering & look forward to next video 😁
@dredfxcustompaint
17 күн бұрын
@@gazgazist your welcome glad you found something shame about the link sorry about that big thanks for the feedback and support with the channel
Did the same thing Rob with the ultra don’t like the front nozzle? Great video 👌
@dredfxcustompaint
18 күн бұрын
Thank you 👍
Great portrait and a great tutorial. I am doing betty Boob at the moment, she has a green dress on, but my green and yellow paint looks like it has dust in it when I put in the isopropyl and/or water. I have different makes of paint, but even my Createx is doing it. It won't come out of the airbrush the way it is, The Createx is transparent, but it blobs when I drop it in and when I mix it, I can see tiny metal like flakes at the bottom of the cup, not all my paint is like this, the black works perfect. Any ideas? Thank You.
@dredfxcustompaint
18 күн бұрын
Fw inks with water and isopropyl should be fine the new version of wicked just mix that with isopropyl and that should be good 👍
@spyuggy
18 күн бұрын
@@dredfxcustompaint Thank You, I shall try them.
I have just bought this airbrush. Is there a way of changing the front guard so the needle is open exposed? I find I always need to clean it and the guard gets in the way
@dredfxcustompaint
9 күн бұрын
Yes there is you can put the front end off the evolution 2024 on this or the infinity
NEW ULTRA COMES WITH VERY BIG NOZZLE.I THINK IS DIFFICULT TO MAKE DETAILS.
@dredfxcustompaint
18 күн бұрын
You can swap it out for a 0.2mm if you wanted to
The only thing I don't like about my Ultra 2024 is that if you're not on top of your trigger technique (push down, pull back), and you're only slightly off, the trigger GRINDS against the body of the airbrush. Not smooth. Not fun.
@dredfxcustompaint
14 күн бұрын
Drop some lube on the sides of the trigger that should help