Airbrushing a Skull using AirShot templates
Тәжірибелік нұсқаулар және стиль
In this video I show you how I airbrushed a skull on a canvas measuring 250 x 250mm using templates by AirShot stencils.
To purchase the templates shown in this video visit (Australia Wide) :
Skull - www.airbrushasylum.com.au/sto...
Texture - www.airbrushasylum.com.au/sto...
Located overseas ? No probs buy from AirShot direct (Worldwide Shipping) :
Skull - airshotstencils.com/products/...
Texture - airshotstencils.com/products/...
🎥 Some of the Products used in this video include (affiliate links) :
- GSI Creos PS.770 Airbrush : amzn.to/371Voju
- Iwata Micron CM+ : amzn.to/2w8ycDu
- Iwata Micron CMSB : amzn.to/2vkhEZ1
For more info on the FireTools template set visit :
www.airbrushasylum.com.au/sto...
For more info on AirShot stencils visit :
airshotstencils.com
👕Check out our Merchandise & airbrush related clothing (use code - ASYLUM20 for 20% off) :
teespring.com/stores/airbrush...
🎨PURCHASE ORIGINAL ART FROM AIRBRUSH ASYLUM :
www.airbrushasylum.com.au/sto...
For more info on Trident paints or to purchase online (Australia only) visit :
www.airbrushasylum.com.au/sto...
To purchase Trident paint (international sales) visit :
www.dna-paints.com/trident/?a...
For more artwork, courses and supplies visit us @
www.airbrushasylum.com.au
Affiliate Links to products mentioned in this video :
www.amazon.com/shop/airbrusha...
To view our video explaining our Amazon Influencer page visit :
• Our NEW Amazon Influen...
**The above contain affiliate links which means that we receive a small commission for any qualifying sales which help to support this channel. Thank You ;)
Пікірлер: 159
"I'm trying to keep it as SIMPLE as possible" Legend level artist right there! lol
Awesome display of talent and teaching skills for us beginners. Much appreciated. John, Houston, Texas
For some reason I can watch airbrush skulls all day. That piece turned out amazing
@AirbrushAsylum
4 жыл бұрын
Thanks mate glad you enjoyed it , surprise surprise I am just about to airbrush more skulls and fire on a Harley 😉👍🏻🤘🏻
@eribertoacedo9505
4 жыл бұрын
Pete Colone I watch Oz quite a bit transforming my hot rod to panels I'm missing with my designs friends are asking if I'll do their bikes, Low riders, i'll have to think about it time and cost issue.🕶"
Well done. Its been a while since I used my airbrush. Ran across this and decided its time to unbox my stuff and start again.
This is stunning! I love how you finished the jaw !!
I also just started airbrushing so I can paint my R/C bodies with custom designs. I really enjoy ur videos you explain everything so well.
@johnathankito7655
4 жыл бұрын
Same here lol
Impressive as always. Your work always inspires me to keep pushing myself! You rock!!
@AirbrushAsylum
4 жыл бұрын
Thank you appreciate the comment and your continued support 🙏🏻👍🏻
Nice job ,I could watch this all day,to see how parts of the templates come together. Your vids making me want to get my airbrush back out,,now that these templates are available,,I may have to upgrade my airbrush , I'm liking the paint pot attached, just subscribed
Just finished my first skull,largely due to your vids, thanks for all the tips.
@AirbrushAsylum
4 жыл бұрын
Awesome thanks and glad you found the video helpful 👍🏻
@eribertoacedo9505
4 жыл бұрын
mickey mc garrity Keep it up all you can do is get better, I watch Oz And collect his artwork transform it to my Hot Rod as a canvas, to show & tell and drum up some business under the table that is I do toolboxes all the time pinstriping cartoons with illusions.🕶"
Awesome work , very good information and directions .
Great job, I’m an artist using acrylic on canvas, now I’m thinking of trying airbrush.
Been watching for a good few year,Still amazed how ya do it👏👏👏👌👌👍
@AirbrushAsylum
4 жыл бұрын
Thank you SO much for your support glad you enjoy my content 👍🏻😉
Great video, thanks for sharing! Appreciate your time and effort 👌
@AirbrushAsylum
4 жыл бұрын
Thank you so much glad you enjoyed the vid 👍🏻
So much knowledge there. Great work bro
Man your freaking amazing.
Love this one!
@AirbrushAsylum
3 жыл бұрын
Thank you, Glad you like it!
Wow! Again...steady freehand rendering...very clear tutorial...might as well do some variation of skull design in the future. Keep it up!!!
Very detailed demonstration. :-)
great master class!
@AirbrushAsylum
4 жыл бұрын
Thank you 🙏🏻
Thanks for sharing :-) So nice to see how it be done
@AirbrushAsylum
4 жыл бұрын
Thank you glad you enjoyed the vid 👍🏻
Looks great
@AirbrushAsylum
4 жыл бұрын
Thanks mate appreciate it 👍🏻
Love this guy watching him do the background thinking that jaw is driving me nuts. Like he read my mind and finished the lower jaw.
@joshuapeeters8734
3 жыл бұрын
Agreed
Most excellent.
Love 2 watch you work !!!!!!
@AirbrushAsylum
2 жыл бұрын
thank you
I'm obsessed with air brushing unfortunately I suck at it lol but my tattoo artist is amazing. Man looks good for sure
Beautiful x
@AirbrushAsylum
4 жыл бұрын
Many thanks 🙏🏻 glad you enjoyed the video 👍🏻
Very nice!!! 👍👍👍👍👍👍👍👍👍👍👍
@AirbrushAsylum
3 жыл бұрын
Thank you so much 👍🏻
Nice!!
Awesome
@AirbrushAsylum
4 жыл бұрын
Cheers bro , glad you like it 👍🏻
Magic!! Love all your stuff, I'm just getting into airbrushing and i watch all your vids. Most 2 or 3 times:-)
@AirbrushAsylum
4 жыл бұрын
Thank you and appreciate you watching my vids more than once 😉🙏🏻 all the best 👍🏻
@benblankenship5892
4 жыл бұрын
Charles, keep watchin Asylums videos. I’ve scoured the KZread world lookin for the best tutorials, advice, and beginner/advanced art and I can’t find anyone who even comes close to Airbrush Asylum. They are the best in my opinion, I agree I can and have watched their videos numerous times, especially if I get puzzled or stumped or jus wanna see how they do it and I’m never disappointed
Impressive
Amazing
@AirbrushAsylum
4 жыл бұрын
Thank you 🙏🏻
Nice Work! Thanks For Sharing............
@AirbrushAsylum
4 жыл бұрын
Thank you appreciate it 👍🏻
Hey Oz Nice artwork as usual still enjoy your content no doubt about it you're the man🕶"
@AirbrushAsylum
4 жыл бұрын
Many thanks 🙏🏻
brilliant,
Thanks!
Thank you for your tutorial please do more! A big hug from Portugal
@AirbrushAsylum
4 жыл бұрын
Thank you glad you enjoyed it and yes, more to come 👍🏻
@eribertoacedo9505
4 жыл бұрын
GUGUS COSTA yes sir keep watching copy what he does on your phone transfer it to your laptop print it out and have fun remember you're signing your name to whatever it is you do🕶"
Nice💛
@AirbrushAsylum
4 жыл бұрын
Thank you glad you enjoyed the video 🤟🏻
Wish I had just 5% of this guys talent.
@AirbrushAsylum
4 жыл бұрын
Lol, thank you so much and I’m sure you have plenty of skills yourself 😉 all the best 👍🏻
@benblankenship5892
4 жыл бұрын
TALKCalgary I know man! I’ve always been able to draw/oil paint. (Not sayin I’m a expert by no means but I’m ok) and I got kinda bored with pencil black/grey. So went to doin some color stuff, then seen airbrush pics... and I was hooked! And I’ve been doin it for almost 4 months now. Probably 4-6 nights a week(2-3 hours a night) and it is a different kinda challenge that’s for sure but I love it for that challenge. I wish I had some classes around here but nope no where near me. Which I’m self taught at most of my art but I can watch tutorials all day but it doesn’t come close bein in person with a artist like the asylum. But jus gotta keep on keepin on, life’s a garden dig it! Lol
@TALKCalgary
4 жыл бұрын
@@benblankenship5892 Unfortunately I'm the opposite, can't draw to save my life. Managed to hold my own for 30 years behind the camera in film and television, but ask me to sketch anything even a basic storyboard and it's game over man!
@eribertoacedo9505
4 жыл бұрын
TALKCalgary Practice also practice and by the way practice
I really thank you do a great job explaining how to airbrush. Is it wrong of I draw and make my own? I was wondering if I cut the dark areas or what?
very nice
@AirbrushAsylum
4 жыл бұрын
Thank you 🙏🏻
super :)
@AirbrushAsylum
4 жыл бұрын
Many thanks 🤟🏻👍🏻
Muito foda que trabalho lindo
@AirbrushAsylum
4 жыл бұрын
👍🏻😉
Nice work and one of the most informative demonstration videos I have seen. Thanks for sharing.
What is a good starting air brush. I've painted cars years ago a d have a couple projects that need an air brudh. If you could recommend a good starter I would appreciate it, thanks. Skull turned out awesome
@AirbrushAsylum
4 жыл бұрын
I would suggest the iwata eclipse HPCS great all round brush and reasonably priced 👍🏻 thank you glad you liked the skull painting 😉
Beautyfull
@AirbrushAsylum
4 жыл бұрын
Thank you 🙏🏻
👍👍
very god my friend
Great job, Can you tell me what you used to make the stencil stick to the surface. Thank you Rob Mahaney Baltimore Maryland USA
@hobbylyfe4716
3 жыл бұрын
Spray adhesive.. like 3m
I can’t keep a consistent line from my cmc plus. Tip dry/clogging makes a fine line skip and stutter. It’s sooooo irritating. Am I not reduced enough? If I reduce enough to get good flow and low PSI, then I cannot travel slowly due to spidering, but I need to be slow moving for some detail work. Kinda frustrating and any and all advice would be GREATLY appreciated.
❤❤❤
@AirbrushAsylum
4 жыл бұрын
Thank you 🙏🏻
@Noor.88
4 жыл бұрын
@@AirbrushAsylum you are a mazing . We are waiting for other videos ❤
Amazing work and i received today my airbrush kit but I need these stencils.. Where can I buy them? Thank you!!
The result is great. Obviously you have mastered the control, however it looks a little awkward. Does it need 2 hands?
@jameshyman418
4 жыл бұрын
most people use both hands one to airbrush the other to steady the hand that is airbrushing adds much more control
@eribertoacedo9505
4 жыл бұрын
paleryder enlighted Two hands keep one hand from shaking two hands more stable and quicker
Great video as always Mate! How are you liking the PS770?
@AirbrushAsylum
4 жыл бұрын
Thank you and I am liking the PS770 I believe SprayGunner just released the PS771 not sure what the difference is ? But I am enjoying using it in addition to my iwata’s 😉👍🏻
@simoncarter679
4 жыл бұрын
Airbrush Asylum I believe it’s the same brush but Chrome plated, but I’m not 100%. Thanks for another video Buddy. Your channel was one I watched a lot while toying with the idea of picking up an airbrush. 2 years on its one of my favourite things, so I’ll always be grateful.
I have this iwata airbrush and having a hard time with PSI AND getting small thin lines vs big huge sprays. I have a book and watched starter videos but my airbrush also spits splatters without kinks, and it's been taken apart and thoroughly cleaned with new needle from day one. No damage. I've tried raising and lowering psi to see if it also adjusted the size of the flow but I guess I'm just not understanding. It's deterring me from airbrushing
@scottyboy6269
2 жыл бұрын
Surprised no one replied, if anyone else reads this make sure you put. What paint brand, what thinner, and what ratio are you mixing it. Which airbrush and needle size Eg I'm running a 0.2mm needle and I generally do 7 drops of thinner to 3 drops of paint
@dlmdlm7685
2 жыл бұрын
What kind of compressor? Do you have moisture trap? Could be either always use tank compressor a regular ones is best not airbrush type if you can run long hose and keep in different room it isn't to bad
Mui talentoso
I bought my custom semi truck and it already has some true style flames and something looks missing. I saw a paintjob with true flames and skulls. So i want to try to airbrush skulls
It look fantastic! Can you please tell me how long it actually took ? Thank you 🙏
@AirbrushAsylum
4 жыл бұрын
It took around 1 hour to paint appreciate the comment and kind words 👍🏻
@jerseyjoe1677
4 жыл бұрын
Airbrush Asylum thanks it looks great buddy
@eribertoacedo9505
4 жыл бұрын
Jersey Joe with practice you can be reasonably quick until then practice no time limit for something with your name on it🕶"
Can you please tell me what size template that is. The website doesn’t give size dimensions. Thanks . I’m looking at doing a guitar body behind the bridge so I am looking to buy the correct size.
@AirbrushAsylum
3 жыл бұрын
The one shown here is around A4 size you can view dimensions available at 👉🏻 airshotstencils.com/products/skull-73?variant=17322948689966
@misslillysdaddy
3 жыл бұрын
@@AirbrushAsylum thanks so much 👍
Could you do this with a .3 needle or is that unreasonable?
@AirbrushAsylum
3 жыл бұрын
Yes totally 👍🏻
Hey friend what is that paper called to trace the drawing thanks gracias 👍🇨🇴
@AirbrushAsylum
4 жыл бұрын
If I use paper to transfer my design I use regular A4 copy paper , if you are referring to the stencil then that is made from Mylar and available from airshotstencils.com 👍🏻
✨💯🙌🔥🖤✨🤙
@AirbrushAsylum
4 жыл бұрын
Thank you 🙏🏻 🤘🏻
@Airbrush asylum can ask something,?airbrush can it be use on clothing fabrics???
When will you have more templates like this skull in? Your website says your out
You think u guys can do another true fire video? Mainly bc I can’t ever get the 1st layer down or “roadmap” for the flames
@eribertoacedo9505
4 жыл бұрын
Ben Blankenship Go online there versus island check out the stencils it's all there and more
@benblankenship5892
4 жыл бұрын
Go where online?
ОДНАКО ...👏👏👏 !!!
Can u do a scull and cross bones video?
Where can I find the same skull than your "actual skull" please? The one you hold in your hand at 21:45 please?
do you sell those stencils to do efect on skulls as a real bones??
Fred Ortiz
What color are you using?
@AirbrushAsylum
4 жыл бұрын
Colours are mentioned in the vid but just in case you missed it I am using Trident paints inc White, Sand, Sepia brown and transparent Base mixed with black 👍🏻
Dam I luve stencil ..but yousing air brush to do teeth out line an thin line. Yousing black. Or dark over light. You must have lot of hand control skill. Like Graff artist. Amazing. I Sean a mate yousing a template stencil ....I need to get my skill s up on out line detail line s
@AirbrushAsylum
4 жыл бұрын
Thank you glad you enjoyed the video and appreciate the kind words 👍🏻
@eribertoacedo9505
4 жыл бұрын
Shane Hart that's why they get big bucks not everyone can airbrush or paint a car or a Harley the ones that do make the bucks.🕶"
why do you only do skulls or silly line and dots ?
Great achievement but before it happens, you have to work hard to master the aero
I been following ur channel for a little while and have even bought some of ur stencils and I want to try and take my airbrushing to the next level do u have a step by step video on realistic flames I have seen guys do this but I'm missing just how to connect the flames and give it that flow can u help me
@AirbrushAsylum
4 жыл бұрын
Thank you for your message and compliments on my work and appreciate you buying some of my templates 🤟🏻 Yes I have a few fire videos available watch this playlist for fire airbrushed using waterbased paints : kzread.info/head/PLkd3s0ymmV0P5rfGhcLNKAEgDa-a-y0gu And this video for automotive real fire using candies hope that helps : kzread.info/dash/bejne/goOmttyvptvFg7Q.html
@3rekoatskustoms929
4 жыл бұрын
@@AirbrushAsylum thanks I'll try thim
@eribertoacedo9505
4 жыл бұрын
3re Koats Kustoms too much on his plate to individually explain but practice your own style is what he does he says that periodically keep watching🕶"
We're you buy the templates
@AirbrushAsylum
4 жыл бұрын
You can get them from : airshotstencils.com
I am a beginer to airbrushing portraits and want to start my own part time business what would you charge per portrait Ilive in ontario canada
Here look its just this easy.....
@AirbrushAsylum
4 жыл бұрын
Thank you appreciate it 👍🏻
@yourselfdotcom
4 жыл бұрын
@@AirbrushAsylum sick work man.
If someone could help me get started with a descent airbrush I would really appreciate it. Thanks in advance.
@AirbrushAsylum
4 жыл бұрын
I would suggest the iwata eclipse HPCS great all round brush and reasonably priced 👍🏻
awesome i checking out some skull airbrushing i want to do 2 skulls on my golf putter instead of the 2 golf balls just think it would be awesome custom putter an pick at my friends tell them its the Reaper it will make you reap every time you have to pay me on the course hahahahahahaha
Россия вас смотрит🇷🇺🇷🇺🇷🇺🇷🇺
@AirbrushAsylum
4 жыл бұрын
👍🏻😉🙏🏻
Pas mal mais, des défauts anatomiques gâche l'ensemble
@AirbrushAsylum
4 жыл бұрын
👍🏻🙏🏻😉
I have a S10 truck I will let u pant it anyway u won't to me ...
looked good yes but he sound bord
Terlalu ribet buat negara +62
@AirbrushAsylum
4 жыл бұрын
👍🏻😉
You talk too much...
👍👍