A quick comparison of a Milwaukee 18volt and a Ingersoll Rand 1/2 inch impact. And then disassembly of a Ingersoll Rand air impact.
Жүктеу.....
Пікірлер: 31
@austinmoore16892 жыл бұрын
Air will never let ya down plus you can save money using it instead of using all these batteries
@marcowens3522
2 жыл бұрын
If the air compressor tears up then you have junk. I ain't got to Lug around a hose I can go to a junk yard and ain't got to take all that other bs around with me. And that 2767 milwaukee will take off any bolt that air impact will and alot more! That air impact ain't fing with that milwaukee period.
@austinmoore1689
2 жыл бұрын
@@marcowens3522 I wouldn't worry about the air compressor being out of order a air hose aint heavy so idk why you people think its a big deal and last part id worry about your m18 impact batteries falling out vs air compressor being broke
@marcowens3522
2 жыл бұрын
@@austinmoore1689 I've never had a M18 battery ever to fall out and Noone in my shop has y'all must be throwing your tools around like a basketball for them to do that and if they ever did get like that they make something to hold the battery in.
@Alex-gn7wd
Жыл бұрын
@@austinmoore1689 lol I use a m12 stubby and save 1/2 of time comparing to air tool
@austinmoore1689
Жыл бұрын
@@Alex-gn7wd you can do the same thing with air people forget ir mac snap on and matco have 3/8s air impacts and stubby
@legendarypillow14502 жыл бұрын
Random fact, but pneumatic tools are airtight and can be used underwater
@sneez9461
2 жыл бұрын
Really??
@legendarypillow1450
2 жыл бұрын
@@sneez9461 most of the time
@SRTin2032 жыл бұрын
There’s also a significant breakaway torque difference with a deep impact vs a shallow impact let alone a deep impact vs a mid chrome socket as shown
@sixtyfiveford3 жыл бұрын
Nice demo. Personally I think pneumatic has more residual speed after the nut/bolt is removed so it continues to move them. So if you're doing a full set of five lug nuts or something like a transmission pan or something with a ton of bolts the pneumatic wins.
@MacStrange
3 жыл бұрын
Not only that, a pneumatic tool is immortal
@legendarypillow1450
2 жыл бұрын
That’s why racers use them. They are airtight so they can be used underwater as well
@JCcanU3 жыл бұрын
Hope you repacked the old impact wrench with fresh grease . good video none the less
@kilgorecustom70213 жыл бұрын
I can tell you're from WI by the way you say "Mwaukee" correctly haha!!
@behemothinferno3 жыл бұрын
Clean the parts in an ultrasonic cleaner, re-grease and re-assemble. I'm sure You'd gain the lost power over the years or at least part of it that way!
@MegamanTheSecond
2 жыл бұрын
Yup those things last forever
@EK99_003 жыл бұрын
Make sure you using HF couplers for your air lines
@sethmunoz70893 жыл бұрын
The previous tool might have began to loose power due to improper oiling maintenance every once and a while when mine gets close to its oiling period it begin to perform sluggish idk maybe not the case for you but definitely for me
@sethmunoz7089
3 жыл бұрын
( Edit) after realistic I hadn’t watched the full video I realized this was the case for you glad you got it to work 😅
@luckyandy76
3 жыл бұрын
@@sethmunoz7089 thanks for tip. I admit i probably dont oil it as much as i should. We have the automatic oilers in the airlines at work and i think i put to much faith in them!
@sdriza2 жыл бұрын
Gotta have both!!! In all sizes, versions....
@enriqueaguilar12113 жыл бұрын
So just so you know you put the hammers in incorrectly. They should be opposite. One smiley face up and one down. That will help a ton!!
@FLUFFYCHAN-oq3zh3 жыл бұрын
good info👍👍👍😊
@williamchong68413 жыл бұрын
For me i just wanna get job done with battery,as long can lock back and unlock it, doesn't car about a few seconds
Пікірлер: 31
Air will never let ya down plus you can save money using it instead of using all these batteries
@marcowens3522
2 жыл бұрын
If the air compressor tears up then you have junk. I ain't got to Lug around a hose I can go to a junk yard and ain't got to take all that other bs around with me. And that 2767 milwaukee will take off any bolt that air impact will and alot more! That air impact ain't fing with that milwaukee period.
@austinmoore1689
2 жыл бұрын
@@marcowens3522 I wouldn't worry about the air compressor being out of order a air hose aint heavy so idk why you people think its a big deal and last part id worry about your m18 impact batteries falling out vs air compressor being broke
@marcowens3522
2 жыл бұрын
@@austinmoore1689 I've never had a M18 battery ever to fall out and Noone in my shop has y'all must be throwing your tools around like a basketball for them to do that and if they ever did get like that they make something to hold the battery in.
@Alex-gn7wd
Жыл бұрын
@@austinmoore1689 lol I use a m12 stubby and save 1/2 of time comparing to air tool
@austinmoore1689
Жыл бұрын
@@Alex-gn7wd you can do the same thing with air people forget ir mac snap on and matco have 3/8s air impacts and stubby
Random fact, but pneumatic tools are airtight and can be used underwater
@sneez9461
2 жыл бұрын
Really??
@legendarypillow1450
2 жыл бұрын
@@sneez9461 most of the time
There’s also a significant breakaway torque difference with a deep impact vs a shallow impact let alone a deep impact vs a mid chrome socket as shown
Nice demo. Personally I think pneumatic has more residual speed after the nut/bolt is removed so it continues to move them. So if you're doing a full set of five lug nuts or something like a transmission pan or something with a ton of bolts the pneumatic wins.
@MacStrange
3 жыл бұрын
Not only that, a pneumatic tool is immortal
@legendarypillow1450
2 жыл бұрын
That’s why racers use them. They are airtight so they can be used underwater as well
Hope you repacked the old impact wrench with fresh grease . good video none the less
I can tell you're from WI by the way you say "Mwaukee" correctly haha!!
Clean the parts in an ultrasonic cleaner, re-grease and re-assemble. I'm sure You'd gain the lost power over the years or at least part of it that way!
@MegamanTheSecond
2 жыл бұрын
Yup those things last forever
Make sure you using HF couplers for your air lines
The previous tool might have began to loose power due to improper oiling maintenance every once and a while when mine gets close to its oiling period it begin to perform sluggish idk maybe not the case for you but definitely for me
@sethmunoz7089
3 жыл бұрын
( Edit) after realistic I hadn’t watched the full video I realized this was the case for you glad you got it to work 😅
@luckyandy76
3 жыл бұрын
@@sethmunoz7089 thanks for tip. I admit i probably dont oil it as much as i should. We have the automatic oilers in the airlines at work and i think i put to much faith in them!
Gotta have both!!! In all sizes, versions....
So just so you know you put the hammers in incorrectly. They should be opposite. One smiley face up and one down. That will help a ton!!
good info👍👍👍😊
For me i just wanna get job done with battery,as long can lock back and unlock it, doesn't car about a few seconds
They make the IR Q version check it out
4:00 Tightening with an impact.. yikes.
@paulnewman8852
2 жыл бұрын
He’s got the stick tho
@sdriza
2 жыл бұрын
torque stick