I have a tip to add to your Jeff video compressor system. I did something what you did with my system. I bought a compressor and tank 120 gallons horizontal at auction for peanuts literally. All I did was buy a single phase 7,5 HP motor totally enclosed fan cooled, from a friend who had no need for the motor. Friend price is just great. The pump just needed to have the head reed valves cleaned. The oil I use in the compressor head is Mobil automotive oil 10-40 weight synthetic. This works great and totally emulsifies the oil to make sure no rust will occur in the tank. Just drain the tank once a week and clean white color water runs out of tanks. Worked for me fella.

If you want to make more effective use of that 3 phase starter...L1 goes in and out T1 of the overload to the motor...L1 to T2...now take T2 and run it back up to L3 and use T3 to the other side of the motor...some three phase overloads only work correctly when they see current on all three legs...check the spec sheet on your overload to be sure.

Jeff thanks for sharing your tech tips and letting us see how you figured out how to set up your shop and also save some money. Very well done sir!

So far your compressor and tanks master setup is so far the best I've seen on KZread Jeff,. Thank you for sharing with us,

@2jeffs1

9 жыл бұрын

OC_VILLAIN Your welcome OC_VILLAIN. When I lived at a different place with a small garage you always need more room. I had an insulated hut outside the shop to keep the noise down. A temp sensor mounted on the cyl head turned a hut cooling fan on as needed and a car muffler on the intake to insure the neighbors stay happy! Glad you enjoyed the video, Jeff

Thank you for the inspiration. I love the attention to detail and craftsmanship that went into this. I aspire to be like you! I'm picking up an old air compressor to build a system of my own today, I'll make a video of the setup when I'm done.

@2jeffs1

9 жыл бұрын

Tiliy74 Hi Tiliy74. It makes me happy to know that. It's the main reason I've been doing this. I wish YT would of been available when I did these projects where you can learn so many things. I wasted too much money to get to this system & didn't want others to encounter the same. Ive had that pump since 1982. Bought it used. Have done a lot of body work and sandblasting with it. The only thing was I rebuilt the valves some time back and caught them before damaging them where the rebuild kit could still be used. (otherwise it damages the valve housing/seats) Another FYI for you - I run Mobil 1 synthetic oil in it where it can get cold here. And I do have a magnetic heater on it where when it gets below zero out I'll turn on for a couple of hours before starting it. The switch is to the right of that control panel. Don't think that was on the video! But hey - good luck on your build, Jeff.

Thanks for the video. I used the same method you did to support my compressor. Plywood on one end and springs to isolate the compressor from the building. It works really well.

Your that guy that every one wants as a friend because you seem cool and you know how to do everything hahaha. Good job dude and very nice setup

@2jeffs1

7 жыл бұрын

You'd laugh if you seen my previous setup's. Actually I got burned bad on one used pump and tank I bought years back. Too funny - a friend brought that up the other day! Like he said that's how them type of folks get so much money (that guy owns a lot of properties/businesses in this area) by ripping others. Anyways it took me a lot of years to get to this point so don't be discouraged. Being patient one can come across a good deal at the right time! Thanks for stopping by and the cool comment, Jeff.

Years ago i bought a used kellogg American 80 gallon 3 phase compressor changed the motor out for a single phase and have no regrets best 300$ ever i know people that have spent thousands on a new compressor and mine will out run their's

For a system pieced together its pretty elaborate and very creative. I could see some people say just go by a commercial screw type compressor with a dryer setup. But when cost effectiveness is a priority piecing together is usually the way to go. And your first tank likely catches most moisture the second tank the rest. Each tank id imagine works as a catch can of sorts. But what iv seen commercial setups go for id guess you have a fraction of the expense for one put into your system. And the dual pressure work station setup is becoming a must. I know for my industry to get manufacture repair certifications some of the equipment required runs at over 100p.s.i but most of the tools max at 90. So to simplify any possible mix ups or questions wether you cranked pressure back up or not. There are dedicated outlets for high pressure. Definitly a 10 for creativness and inginuity. . and there are always nay sayers. Everybody can do better they just never do. If who ever thumbs downs this, i ask this. lets see what your runnin..?

Excellent tips. I was looking for adding a second 30 gal tank to my old 2-stage compressor, but I never considered that the valves may need servicing. Great advice and ingenious layout. I only have a home setup, but I aspire to something like yours!

@2jeffs1

9 жыл бұрын

Don Krasniak Thank you Don. I remember years back I started out with those sears 2 cylinder, single stage with reed valves when one would break it would damage the head too. $$$. Glad you enjoyed the video and found it helpful. That's why I enjoy doing this!

great video. I'm an air compressor enthusiast have been since a kid. have a big Quincy compressor in my garage love it. like the way you installed your system. very cool. thanks.

@2jeffs1

7 жыл бұрын

Your welcome Dave!

That's a beautiful set up. thank you for sharing.

Very nice air setup. I see a lot of time and clever engineering went into it. Looking forward to checking out you other videos.

@2jeffs1

8 жыл бұрын

+Fireship1 Thanks Fireship1. I enjoy creating out of the box things. On that air shot off actuator idea there was a definite savings on the electric bill. A friend that works at a big factory said that they spent some time fixing a lot of air leaks a while back. They figured it saved roughly 12K on the electric bill! Of course they have some monster compressors at those places tho...

Very Nice set up ...Nice Dyna at beginning too I also have a Dyna wide glide now I am shooting for a compressor set up .... Half as good as that baby would be nice ..... That is one nice system you made there ....thumbs up

You know your stuff. Anyone who understands there job properly in the way you do is ok with me, then I am your new pal from Scotland UK have a great life buddy keep saving the pennies . Alistair

@2jeffs1

7 жыл бұрын

Hello there Alistair. I like when folks say where they are from. This YT thing sure does a great job of bringing people together with similar hobbies from all around the world! Always makes me curious how it would be to live in the different locations. Thank you for stopping by and taking time to leave a comment. And - heck yeah - it would be great to have you stop by again! Jeff. :>)

Nice air compressor set up there Jeff. I really like the way you plumbed it through the building as well as the switches, gauges and open/ close valve.

@2jeffs1

10 жыл бұрын

Thank You! I spent some time on the setup but once you get up & running it all seems worth it.

Cool setup and great job explaining it. Your shop looks like a cool place to hang out.

@2jeffs1

8 жыл бұрын

+A. Hyder Thank you!

Very nice and organized shop, I like that, and the animals at the end makes it complete.

@2jeffs1

8 жыл бұрын

+Willem Streutgers Thank you Willem!

You have the Best air setup I have ever seen !!!

@2jeffs1

9 жыл бұрын

+not2fast4u2c Thanks not2fast4u2c! Thought it was strange no one was commenting on video's. Just looked in another area this AM. Ahhh - The YT changes... :>)

@not2fast4u2c

9 жыл бұрын

I have had trouble with the comment for over a week I have to check my newest videos every day

@2jeffs1

9 жыл бұрын

Interesting. It's nice to know it isn't just something wrong here.

king of compressor set-up..!!! salute..!!!

Been looking for a video that shows extra tanks hooked into main because I have the idea but wasn't sure it would be beneficial or exactly how its done .....studying the way you plumbed yours has given me some ideas .... thanks for posting this ..... Ile have to check out some other videos you have .... Thanks again

@2jeffs1

8 жыл бұрын

Your welcome. Always enjoy the comments. It's nice to know when some of the info helped others out! And - Thanks for stopping by, Jeff

Great video and tips. What a cool building! That compressor is very quiet for its size, great stuff.

@2jeffs1

10 жыл бұрын

Thanks Craig. I'll have some more building vids coming up in the future where I think there are other areas that can be beneficial too!

good stuff, LOVE the attention to detail.

@2jeffs1

9 жыл бұрын

jamie onderdonk Thanks jamie. This setup has served me well here. I wasted too much money thru the years. I was hoping this would help out others to avoid that. :>)

I have to say you are amazing! just listen to your compressor , it sounds like a train, real beast- you know it has power. for myself I would run 2 1 inch semi tire guns simultaneously. I'd say a 1 1/4 exit line from your main tank fed of to 2 3/4 hoses would be good. Again I will tell you you have a shocking well laid out designed air system I am very envious of!

Thanks for the awesome ideas!!

Beautifully designed and set up system

Geez. Now I really have air compressor envy.

I paint cars for a living 20 years. I've Ben painting I have a nice setup but Man U have a sick. Compressor nice work u did there am going to build my own one .. nice job u did there

@2jeffs1

7 жыл бұрын

Thank you James!

I cannot wait for more! thank you for doing this

@2jeffs1

10 жыл бұрын

Thanks, there are more ideas being pondered at this moment. :>)

Wow your place is awesome. I love over engineering for convenience!! Looks like an awesome place to hang out and pretty much live there !!

@2jeffs1

9 жыл бұрын

MrTheHillfolk Thanks man! Having a setup with most used things at only a step away has been a time saver. It amazes me on how things flow here at times. I took the flywheel off from the compressor pump to lighten it up to lift it on the tank. Then some friends showed up & the rest is history. A few call me a hermit - but then there is plenty to do here!

man, that is one cheeky set up, well done

I have a feeling that in the future there will be a movie about this. In the beginning, it will read "based on a true story". It's gonna be inspirational. Heck, America needs this movie now.

Those old Kellogg American pumps are good for more than one lifetime. I do enjoy your setup however somethings can be simplified. That pump is big enough that it does not really need the extra tanks if you set the RPM of the pump closer to it's highest rated range. Where you are airing up more tanks or running the higher RPM, the wear is the same on the pump, one runs longer and the other faster (the pumps ACFM matters the most, tank capacity is second to that aside from duty cycles). The air can be much dryer with a true refrigerated air dryer. The electric valves can be replaced with simple 24V air solenoid valves (simple 24VAC distribution transformer required). Just a few simplified ideas. I prefer a 24V valve system for a few reasons. The first is that it uses small gauge wire to run the valves. The second is it can use virtually any type of switch system as high voltage is no longer an object. Thirdly, you can high volume solenoids the occupy very little space in the system. Also, solenoids last a great deal longer than ball valves. If you want to go a little more crazy, low voltage controls allow you to make full logic control panels and remote operator stations for valves with little extra wire or parts. You can even sequence and time drain operations with solenoid drain valves.

@impactajuvenile

7 жыл бұрын

Dragon Steel hey that all sounds very impressive... I hope you shoot s video and post on KZread, so we can all have a look at what your set up is?

@mythril4

7 жыл бұрын

I should make videos again, had lots of ideas to share. My home setup is not that spectacular, just the compressor. Normally I help people and companies who desire automation and remote functions with their design. When I build the new shop for my trucking company, I will employ many of the options I wrote about. I did not bother with the existing shop as it will get closed down soon, it would be a waste of effort and money. At the shop, I run an Altals Copco direct drive on a 120GAL tank. Without the tank it runs 1" impacts. I'll make a video on air automation on my next automation project then post it. Your pump has more RPM range left in it's specs than what you are using. May require more HP to reach it since a larger motor pulley would have to be used. At the new shop I intend to employ a rotary screw compressor on a VFD drive. It will sit on a small 30GAL tank. From their it will feed the distribution network. All locations will employ 24V solenoids that are both turned on locally and from a remote panel. The drains on the down pipes and tank will also be automated. The point is to not only be more energy efficient, but be able to shut the whole valve network down at the days end or in an emergency from a single location. This not only preserves the fittings, hoses, and tools left attached. But it also increases the longevity of the air supply system reducing leaks and monthly/annual costs.

@jeff, I love your videos. Keep them coming. I had a question about your excellent compressor control panel: I didn't understand how shutting the lower switch off (which closes the shutter-motor-powered valve to the shop airlines) prevents air leaking from the system (as you mentioned at about 8:18 in the video)? Are you more likely to have air leaking downstream of the power controlled valve than upstream between your air storage tanks and the powered valve)?

your my hero I love that set up great job

Dude That setup is amazing.

I now have a new life goal: to create an air compressor setup that rivals this beauty.

Great tips. Thanks!

Really nice video . Thank you

Coolest guy. Nice shop and helpful tips.

great set up don't ya know! thanks for the video.

Impressive setup, well done!!

@2jeffs1

8 жыл бұрын

+Chris Davis Thankx Chris!

thats the most freakin awsome air system i ever seen your one smart n crafty dude thanks for the great video !!!!!

@2jeffs1

7 жыл бұрын

Your welcome Raymond!

Such a elaperate system, so cool,,,,and the shutter switch, neat

@2jeffs1

5 жыл бұрын

Thank you George!

very nice setup

Wow. This guy is the man!!!

right up my street all this stuff, love your workshop.

@2jeffs1

8 жыл бұрын

+Michael Peirson Thank you Mike!

nice setup!

Nice video. I've just been thinking about doing exactly what you have done. I just wasn't sure it would work like I thought it would (should). Now that I've seen yours. Mine will get done soon also. I only have 2 tanks at this moment. I'll pick up some more tanks . thanks again for the video

@2jeffs1

7 жыл бұрын

Glad to help out Lee. It took a few years for me to get the extra tanks too. Usually a friend tips me off when they find something on a good deal. Actually that happens on so many things here from the Case tractor to the scissors lift.

@leeolaeta510

7 жыл бұрын

2jeffs1 I also like the idea of using a Propane tank. would a couple of those work as well?

Good video, have you ever considered putting some kind of bladder system in a tank? Maybe screw type(internal).

2Jeffs I have a old propane tank am thinking of using as a second tank know that I have seen this video I like your set up it looks great.

@2jeffs1

9 жыл бұрын

iwantosavemoney You brought up a point that I must add to. When I started using that propane tank you could slightly smell that propane sent. No biggie - ahhhh yes. If you do body work beware. I couldn't figure out why there was fish eye in the paint. Never had that problem before. It was from that tank. I will flush out after a while and don't matter if you are just using air tools. Just a little FYI for ya.

man that is a vary nice set up

WOW, Compressor set up is terrific, how many gallons the air storage do you have? Can you tell me what the RPM on both your motor and compressor? Can many amps does your compressor motor draw? you remind me a lot of my first mentor he taught me out of think outside the box. You are definitely a genius and I would love to be an apprentice for you A disabled combat veteran have a like to tinker around my shop and make things like you did. I look forward to more of your videos. Out of curiosity you up north (MN) you have my Minnesota accent

@2jeffs1

9 жыл бұрын

James Martinson Hi James. I posted this video to hopefully help others out & give some ideas. I wasted way too much money on compressors before this setup & didn't want to to see others experience that. When doing mechanical repairs instead of bodywork - the pump don't run very often. I think storage would be in the area of 340 gallons. There are times when it doesn't need to be run for several weeks depending on what's going on. Not sure on the compressor RPM but the motor is 1725 and draws 39.8 amps @ full load. It is a Kellogg pump. The model # stamped on the pump is 352TVX. Did know all the specs when I put things together but that was in the early 80's :>) Minnesota is close - Central Wisconsin is the actual!!!

omg your compressor is a beast!

thats a nice setup. good video.

@2jeffs1

8 жыл бұрын

Thank you very much Michael, Jeff.

now that's just a cool setup

So can I get this at Lowes? J/k! Great video and rig, Jeff.

You got one hell of an air compressor system. :)

@2jeffs1

10 жыл бұрын

Rock&Roll Thanks. :>) I definitely went thru a few before this setup!

@Godzillah

10 жыл бұрын

I probably get something like this in the garage if i could. Maybe my backyard have space yeah.

Thanks for the tips

@2jeffs1

10 жыл бұрын

Thank You Bob. Glad you enjoyed the video!

Your a smart as bloke. Awesome shop

@2jeffs1

8 жыл бұрын

Thanks Brent. Hope you were able to grab some tips!

Hey thanks for the video hopefully you can help me out I just set up a 80gallon ac and I'm trying to run a lead hose from the compressor (I have a 1/2in ball valve directly out of the tank) to a wall mounted 1/2in filter and regulator then out and up to a hose reel but I can't figure out how to tighten both sides of the lead hose for ex. If you tighten the hose to the filter then try to run it into the side of the reel you can't tighten it. and I'm using 1/2in hoses so I wouldn't want to use a 1/2 to 1/4 reducer and put a coupler on there seems like it would really choke up the system

@2jeffs1

8 жыл бұрын

+Ctyler93 Hello Ctyler93. Google 1/2" union. You will see some pictures and this is what I believe you need to get your project going. You will also need a 1/2" nipple to finish the union install.

I like Compressors, Air systems, and Gagets. Watching this vid was very satisfying.....AND informative. My manual system valve is a drag to remember to shut off daily. I MUST automate it now! lol Maybe a few indicator lights for a Jupiter 2 effect as well. DANGER! DANGER Will Robinson!

@2jeffs1

8 жыл бұрын

+kmcwhq Glad you enjoyed the vid!! I enjoy tampering with anything electrical. Too funny on the Will Robinson thing - with flapping arms have have said that here too! Seems to get strange looks when a newbie is present!!!

@kmcwhq

7 жыл бұрын

Had to stop back for another 'fix' of your air system. Some very good ideas indeed. Have you ever done a Shop Tour video? If not, please consider doing one, I'm sure we all would love to see all your tools and clever goodies.

good video

that's a very nice set up .

@2jeffs1

6 жыл бұрын

Thank you John!

It's nice to have 3 phases electric 600V system in your garage :)

2jeffs1 - fantastic video! I love the setup you have built. It's really impressive. I have a question for you: how do have the red light wired so it only lights up when the compressor is running?

@2jeffs1

6 жыл бұрын

It is connected to the 110 lead for the starter box solenoid. I do have a 5A separate fuse for the controls where the 40A breaker for the motor would never pop first. If your setup don't have that starter box and just using the pressure switch it could be connected to one of the 110 leads for the motor or pressure switch. Again - the circuit breaker for the motor is 40A so an inline 5A fuse at the connection for the light should be installed. Glad you enjoyed the video and thankx for stopping by, Jeff.

You are one talented guy here Jeff

@2jeffs1

9 жыл бұрын

Charles Rinehart Thank you Charles. I really enjoy sharing ideas to help on the choices which one can make/have available!!

Dude! I love you. You're like the father I never had... except you work for NASA and I would always feel inferior to you :-). I wish I had your knowledge. You're a super interesting chap.

@2jeffs1

8 жыл бұрын

+Robert Abiseid Thank you Robert. Things take time. I thought I knew a lot when I arrived at this place in 1986. Picked up so many things since then. Everyone has things they excel at, many times hit friends up for things and if they didn't have an answer they knew someone who probably did. I always found the more people you know and help out the better life will be in the future. Of course now a days this YT thing is such a great source for learning. Didn't have that option as I was growing up! :>)

Great stuff. Love your approach

@2jeffs1

10 жыл бұрын

Friends tell me that I over-engineer things....It's fun to create things that are different....LOL

@phooesnax

10 жыл бұрын

I thin your methods are very smart.

@2jeffs1

10 жыл бұрын

Thankx I like that kind! :>)

@phooesnax

10 жыл бұрын

If I thought of someone making the absolute most of things they have....you would be it.

Hi jeff you made a very nice video. I wonder if you can tell me if i can use my 24L 1,5hp air compressor to fill another 100L tank because 24L is very small and i can`t do any job with this air compressor.

@matter9

7 жыл бұрын

Ευστάθιος Αναστοπουλος no reason it wouldn't work but it will take about 4x longer to fill. You could also gang the two together and take advantage of all the volume at your disposal

So like do you never run out of air because that’s insanely awesome!! 👍🏻👍🏻

@2jeffs1

5 жыл бұрын

Been working on several 3 wheeler resto's and now that mx80 dirt bike. The girlfriend loves sand blasting the parts in that enclosed sand blast tank with the window in it. We run the air down to 60 psi then start the compressor. (shuts off at 160) Usually only needs to run once a day!

Don't forget to install a properly sized Pressure Relief Valve!!! Great Job!

@2jeffs1

8 жыл бұрын

+Susan Wood Thank you Susan.

excellent video! very well explained!! subbed! liked ! ... I can tell you really think through things to the end ! ... When possible. :)

@2jeffs1

7 жыл бұрын

Thank you! I did have multiple different set ups thru the years. This is the one where I think we'll call things done!

Did you help build CERN ?

You have a great set up and I enjoyed tips. I am a new owner of an air compressor so this helped. Do you use a water separator?

@2jeffs1

9 жыл бұрын

***** Never used a water separator ( hope you meant to get the water off each tank ) although did consider that thought at one time. I'm not sure if they would get damaged in the winter with the freezing weather... Glad to know the video helps you out & thank you for your thoughts, Jeff.

Hi there! It's realy nice and neat air set! I like this :) What can you tell about compressor efficiency?

@2jeffs1

8 жыл бұрын

+qmpel The cfm of the pump varies with the size of the motor used. It can be from 7.1/2 to 15 hp to run this pump. Here is the part number of the pump if you would like to check them out on Google. 352TVX

Jeff a follow up on the propylene, I checked with the welding gas near me and he told me that it's hotter, cleaner and cheaper just like you said! but, he doesn't carry it. He could order it. I was familiar with other fuel gases I just hadn't heard of propylene. I guess if the welding shop has a better and cheaper gas they keep it a secret? And I thought he job was to help me stay in business to buy shit from him thanks Jeff!

@2jeffs1

10 жыл бұрын

Hello and I want to Thank You for the follow up. That was very interesting! I was told a propylene tank of the same size as a acetylene tank would last 5 times longer. Sometimes things are hard to believe. I found that totally true. I heard that acetylene costs more because now they have to fill them under water for safety regulations. Another thing is if you transport acetylene you should keep the tanks upright. If not one should wait a day before using. ??? Don't know if that is true but interesting facts if so. Things seem to keep changing with the crappy economy and the place I originally dealt with closed down. The new vendor did refill my tank but like you said I wonder if they prefer to keep this secret where it did seem that way here too. FYI - I did have to leave my tank there for a day to get it re-filled as there was no exchange. I was wondering if that was worth putting in the vid - but if it helps people out I like to hear that and makes it all worth it!

Wow. I have only 10 gallons. Would love to upgrade to like 10000000000000!!!!!!! Garsh darn. You lucky 🍀

Very informative, thank you! I have a question... I'm renting a shop that has a vertical compressor mounted just outside the back wall of the building. It has a small slant roof-like awning over the compressor but has nothing around the sides of the compressor. Do you have any advise for what I should do for protecting the compressor from the elements, if needed? I live in an area of Colorado where the summers are hot and the winters are cold. Thanks in advance.

@2jeffs1

7 жыл бұрын

Actually in the shop I had before here I had a outside hut built around the compressor with a slanted roof to free up shop space and not hear the comp running. I did have sound deadening blankets and a car muffler on the intake to keep the neighbors happy. I had a sensor which would turn on an exhaust fan if the hut got too warm inside. I still use Mobil 1 5/30 (year round) in the pump where it gets so cold upstairs here in the winter. Probably with what you have as long as the snow don't get on things you would be ok on not doing a full enclosure. I do have a magnetic heater (sticks to the pump side cover) on this setup which will get turned on for an hour if it is 10 below or colder for the first startup of the day only.

@hoosierpinchedaddy6370

7 жыл бұрын

2jeffs1 Thanks so much for the tips.

Great setup💯, not like my pancake compressor in the bathroom

Jeff are your main lines copper? It looks like it from the video. Sorry for all the questions but your shop and video's are amazing!! Would love to see a shop tour and more on your auto's! As always Jeff thanks for all the info and help!!

@2jeffs1

8 жыл бұрын

+dave hogan Pretty much all the lines are 1/2" id copper. There is 1/2" steel pipe where it comes down from upstairs. Never had any issues with several tools running off the same feed line. Have a 1/2' hose that slides thru 1-1/2" pvc pipe to the rear shed for a sand blaster feed to do blasting out in the field. In today's times if I had to do things over I'd possibly consider doing things in pvc only for the speed of the install thought. There are so many video's that I want to produce. Some time there will be one on shop tour and layout so stay tuned!

This is several years after you posted this, but do you still have the DuPont number for that paint color?

Where did u get those big pressure guages bud? Do they come with the little cut in/ cut out lights? And the switch you use to turn on the air compressor is it wired in for 220 or 110? I love ur build and wanting to make a little panel aswell.

@2jeffs1

7 жыл бұрын

There called flush mount panel gauges. I bought them from Granger. (3-1/2") The cut in solenoid for the starter box is 110v and I have a 5a fuse in line just for that, those indicator lights and shutter motor. I definitely gathered your aware one can't use 1 of the legs from the 220 breaker for the motor to power those low amperage circuits. Good luck on your project, Jeff.

I got a modern air compressor working and its only advantage is the compact shape. the motor and the piston is machined into one unit, so its not serviceable for the most part. Definitely better all around to buy the motor and piston separate, or better yet, salvage a motor from a air conditioner or ventilation blower.

MY father recently passed father (91) has a john wood company air compressor...or that's just the name on the huge horizontal tank. However, the pump looks 'identical' to the one in the video, the build date stamped on it is lower cylinder casting is 3/59 and a small metal tag reads "model 331" "serial L424561" but I can't find out the pumps manufacture name, HP etc? Again it looks identical to the compressor pump motor in the video... any help?

Ohio accent? like the set up.. question on my 2 stage 50gal set up. I'm trying to open the tank ends up but it's seems to stuck for PB blaster, heat and a half inch nematic driver to even budge. any suggestions? I'm wanting to restore my grandfathers ole Sears model. thanks in advance

@2jeffs1

5 жыл бұрын

I hear ya. Always had a hard time on those too. No tips, remember giving up on those too in the past.

Thanks Jeff. The problem with my pump is that it started leaking air from the nut with a screen in it. The air seems to be coming from the small line from the top of the head. It leaks while pumping and while no pumping. Any ideas on repair? Thanks, David

@2jeffs1

9 жыл бұрын

David Apple That 1/4" line that comes from the head is a pressure release for when the compressor shuts off. Just so you are aware - where their is air coming out of that has nothing to do with the pump valves or pistons being bad. If that had pressure on it @ start up it would be hard on the motor. It's kinda like a compression release on dirt bike & some small engines. I've never had mine apart so I don't know what might need repair or replacing. You will probably see some weights that fling outward after rpm is up to speed. Maybe stuck?? Sometimes things just need an 0 ring too. It shouldn't be releasing air while running just for several seconds after stopping. BUT - check that last. Now - If it continues leaking after shutoff then the check valve that is in that big line from the tank to the pump would be the candidate. That is the one that screws into the tank at the tank. MAKE SURE to bleed all the air from the tank before removing that!!! There should be NO air coming out of that towards the pump. I'd start with that first but it does sound like you might have 2 different issues here. Sorry Dave I'm not the best at explaining things. FYI - Most of the valves I've seen can be taken apart to see what happened. Have fun & hope this gets ya fixed, Jeff

Damn that is nice !

hey there, i seen ur air compressor you had shown the replacement valve gaskets and parts. is there a site i can access to get proper parts for my curtis two stage compressor

@2jeffs1

7 жыл бұрын

Hi Daniel. All the parts I have been getting are from a local air compressor place. There probably is a good site online. If anyone knows about one please chime in.

Hi, quite a set up, Thanks for the tips. I am still setting mine up. Being retired, my objective of setting up at minimum cost is wise as it forces me to learn much more than I would if I took the Cheque book solution. I am having trouble setting up the wafer type valves, which I am sure were set up wrong when I purchased my old 2 piston reciprocating pump type compressor. Can you suggest where I might go for valve set up advice? The brand info has come off the original hardware and no service shop wants to touch it. They say it is cheaper to buy a new one than pay their service charges, which is probably correct. Any suggestions?

@2jeffs1

7 жыл бұрын

That's sad to hear LIoyd. If you could find out exactly what you have, then find a parts blowup would show what order to assemble the parts in the valves. Maybe google air compressor valves. then click on the pictures to view more. Find something like what you have, then click on that picture. Takes time but can give results. Some folks aren't real ambitious. Don't let that detour you to get your compressor going, actually several times thru the years on different matters I would offer someone some $ for their time to get some helpful info. Might sound stupid but it helped in several instances. Speaking of work, gotta get back, good luck, Jeff.

@lloydwilliams7640

7 жыл бұрын

Thanks, I have tried local sources with no success, even with chequebook in hand, but you have given me a solution, I will make a video of the problem in the reasonable hope that another youtuber out there will know the situation and have the answer

Do you live in the UP? You sound like a Yooper. Great setup. Love it. I would never need this much air but I love cool stuff like this.

@2jeffs1

8 жыл бұрын

+behrens97 Thanks behrens97. Central Wis. It was a necessity here when doing sand blasting and running multiple sanders at once. This YT thing is neat to see what others create around the world!

Hey jeff, I am from Michigan around the detroit area and have been looking for a kellogg 352 pump for a little bit, if u see or know where I can find a used pump at a good price could u give me a heads up. I currently have a kellogg 331TV with two 80 galllon tanks. I would like the bigger pump to help out with running a sand blast cabinet. your video inspired me to build my current set up. thanks for the information!!

@2jeffs1

8 жыл бұрын

Hi Brian, thanks for stopping by. If I hear of something - yes I shall tip you off. Actually a friend gave me the tip on the one I got. I enjoy feedback such as yours where it makes putting these videos together worth the time and the reason I started this YT thing.

@grock2583

7 жыл бұрын

Hey Jeff I found a Kellogg 352 in Detroit on craigslist for $100 needs some lower end work which I have parts coming.I went threw the valves and seats can be lapped wanted to find just the valve and spring set. I saw u were using comp air. Is that still available? Also any leads on a single phase 7.5 hp used motor would be awesome thankx, The cheapest I found a new one was $650 on ebay ouch!

Love it

What are some best recommendations to make sure I don’t have a tank explosion?

@2jeffs1

4 жыл бұрын

One must always have a high pressure blow off valve in the system. I believe that one is supposed to have tanks tested every so often. Never use an old skunky tank.

So helpfull

Hi jeff thats a great set up.Can you tell me the cfm of that compresser pump.I have a 15cfm 3 hp and a 2 hp 9 cfm linked with a delayed start between the machines ,so both moters dont start simultainusly on single phase /240v.I have been told that the maximum air pump size is 15cfm/3 hp moter on single phase/240 v is that correct.How have you managed to connect and run such a big pump on single phase supply.Cheers Steve ruf (uk)

@2jeffs1

9 жыл бұрын

Hello Steve. Can't remember the actual cfm of the pump where it has been so many years. approx 40 - 50 it seems. Here is some info that might be helpful for you. I do remember that pump is rated for a 7-1/2 to 15 hp motor. I am running a 7-1/2 on it. The motor label is 39.8A @ 220 (single phase 1750 RPM) I have a 40 A breaker on it in case anything goes wrong so it will pop it quickly. This is run off a 200A service. I had very good luck with this and never had an issue with the motor. Maybe check what the biggest motor that could be run on what you have there and purchase a pump for that size motor. I enjoyed your thoughts/write up as at my old shop I had considered a similar setup. Hopefully this will help you out Steve, Good luck, Jeff

@2jeffs1

9 жыл бұрын

2jeffs1 Hi Steve. One more thing I'd like to pass along to you. At my old shop the house had a 60A service which the garage also was hooked to. It worked very good. I had this setup running there for several years before moving to here. I only blew the main in the house 2-3 times. The pop machine, window air conditioner, maybe the house fridge, & was welding and forgot to leave the compressor off. If one was to use the welder or compressor separately there was never an issue. I thought this might be helpful for folks who might not have had much wiring experience. It's nice to know what can actually be done....

Hey buddy I have an old Schramm built in 1951. Is it worth the doing a valve job? Served me well but is getting tired.

@2jeffs1

5 жыл бұрын

Your best bet is checking the availability of all the parts needed and pricing. Not sure how old my pump is . If possible I would prefer to keep mine going when the time comes where those old beasts last so long.

so great great and smart

@2jeffs1

9 жыл бұрын

amjad amj Thank You amjad!

How would you know what kind of valve kit you would need if you have no idea what type of menu facture made yourCompressor pump

@Steve_Just_Steve

7 жыл бұрын

1. Look for numbers on casting 2. Measure

Where do you gets your parts for the compressor I have an old v twin 1947 , I’d like to rebuild if I can find the parts

@2jeffs1

6 жыл бұрын

There was a local air compressor store which was very helpful in getting the parts for mine. Now a days Google your pump if you have some readable part/pump numbers available.