Quick video on the AFX Track Borders by Viper Scale Racing.
Жүктеу.....
Пікірлер: 28
@scottshouseofh.o.racing Жыл бұрын
They changed the way the track looks! I like the way they look and give the outside lane some drifting area. Great addition that looks great and serves a purpose! Win win!! 😁👍🏁
@marksslotcargarage
Жыл бұрын
Thanks Scott! I am debating if I want to try and pint them, maybe red and white stripes?
@All-ScaleSlotCars Жыл бұрын
Thank you for this video! It's interesting that they didn't measure the height correctly, hopefully they will be addressing that issue. Either way, thanks for letting us know about the solution you have found. I'll definitely be looking into these. Have a Merry Christmas and Happy Holidays! Dennis
@marksslotcargarage
Жыл бұрын
Thanks Dennis, I probably could have got away with just the double sided tape holding it to the track to keep it level but yeah the borders are a little thinner than the track.
@Gale_Force_Raceway Жыл бұрын
Looks good Mark, and glad they still make 'em. I saw them on another channel and they thought they might be gone!
@marksslotcargarage
Жыл бұрын
Thanks, I think they are a fairly new item for Viper, they have them under the track accessories section of their site.
@greggieboy1046 Жыл бұрын
Dresses the track up nicely. Merry Christmas.
@marksslotcargarage
Жыл бұрын
Thanks, you too!
@slotslidershoslotcars Жыл бұрын
They look good👍🏻
@marksslotcargarage
Жыл бұрын
Thanks!
@johnnyirwin9838 Жыл бұрын
Borders look good . Good job
@marksslotcargarage
Жыл бұрын
Thanks Johnny.
@sjnicol1 Жыл бұрын
Thanks for the info
@marksslotcargarage
Жыл бұрын
You're welcome Scott, thanks for checking out the video.
@calvincooley1074 Жыл бұрын
Cool! I'd still use gaurdrail for visual effect
@marksslotcargarage
Жыл бұрын
Actually that is one thing I forgot to mention, the borders are solid so attaching any kind of clip on guard rail in not going to work.
@domer99 Жыл бұрын
Thank you for this, very good to see these pieces in place. The lead in/out looks like it may be a bit short if you exit a corner hot with the rear out. Have you had the opportunity to run many laps with the borders in place? I suppose the issue (if there were to be one), may be more pronounced with pancake motor cars vs. inline magnet style cars.
@marksslotcargarage
Жыл бұрын
I have run my T-Jet and non-magnatraction cars on them and they seem to be doing the job, i was able to drift out on them and keep the car on the track....thanks.
@phillyjoejones5161 Жыл бұрын
The track is really looking good. I'm impressed. What's the footage?
@marksslotcargarage
Жыл бұрын
Thanks! The table is 4x10, the track is about a 42 foot lap length.
@phillyjoejones5161
Жыл бұрын
@@marksslotcargarage Sweet...have you thought about high banks?
@marksslotcargarage
Жыл бұрын
I have a few banked curves but they did not work out right for my track layout. Plus I prefer to have to slow down on the turns. :-)
@phillyjoejones5161
Жыл бұрын
@@marksslotcargarage Understandable
@tommydolce747 ай бұрын
Could you please tell me how wide they are from the track edge. Like half inches, three quarter? Im working on a layout.
@marksslotcargarage
7 ай бұрын
Hey Tommy, they are 3/4 of an inch wide.
@tommydolce74
7 ай бұрын
@marksslotcargarage much appreciated as my layout is getting walls.
@shiftintohigh5564 Жыл бұрын
Looking at this. I think it evens the inside / outside lane argument a bit. Thanks for showing. All I see listed is “inners” no “outers”. makes no sense.
@marksslotcargarage
Жыл бұрын
Thanks! You mean on Vipers site? I just checked and I see all the inner and outer boarders listed under tracks/accessories.
Пікірлер: 28
They changed the way the track looks! I like the way they look and give the outside lane some drifting area. Great addition that looks great and serves a purpose! Win win!! 😁👍🏁
@marksslotcargarage
Жыл бұрын
Thanks Scott! I am debating if I want to try and pint them, maybe red and white stripes?
Thank you for this video! It's interesting that they didn't measure the height correctly, hopefully they will be addressing that issue. Either way, thanks for letting us know about the solution you have found. I'll definitely be looking into these. Have a Merry Christmas and Happy Holidays! Dennis
@marksslotcargarage
Жыл бұрын
Thanks Dennis, I probably could have got away with just the double sided tape holding it to the track to keep it level but yeah the borders are a little thinner than the track.
Looks good Mark, and glad they still make 'em. I saw them on another channel and they thought they might be gone!
@marksslotcargarage
Жыл бұрын
Thanks, I think they are a fairly new item for Viper, they have them under the track accessories section of their site.
Dresses the track up nicely. Merry Christmas.
@marksslotcargarage
Жыл бұрын
Thanks, you too!
They look good👍🏻
@marksslotcargarage
Жыл бұрын
Thanks!
Borders look good . Good job
@marksslotcargarage
Жыл бұрын
Thanks Johnny.
Thanks for the info
@marksslotcargarage
Жыл бұрын
You're welcome Scott, thanks for checking out the video.
Cool! I'd still use gaurdrail for visual effect
@marksslotcargarage
Жыл бұрын
Actually that is one thing I forgot to mention, the borders are solid so attaching any kind of clip on guard rail in not going to work.
Thank you for this, very good to see these pieces in place. The lead in/out looks like it may be a bit short if you exit a corner hot with the rear out. Have you had the opportunity to run many laps with the borders in place? I suppose the issue (if there were to be one), may be more pronounced with pancake motor cars vs. inline magnet style cars.
@marksslotcargarage
Жыл бұрын
I have run my T-Jet and non-magnatraction cars on them and they seem to be doing the job, i was able to drift out on them and keep the car on the track....thanks.
The track is really looking good. I'm impressed. What's the footage?
@marksslotcargarage
Жыл бұрын
Thanks! The table is 4x10, the track is about a 42 foot lap length.
@phillyjoejones5161
Жыл бұрын
@@marksslotcargarage Sweet...have you thought about high banks?
@marksslotcargarage
Жыл бұрын
I have a few banked curves but they did not work out right for my track layout. Plus I prefer to have to slow down on the turns. :-)
@phillyjoejones5161
Жыл бұрын
@@marksslotcargarage Understandable
Could you please tell me how wide they are from the track edge. Like half inches, three quarter? Im working on a layout.
@marksslotcargarage
7 ай бұрын
Hey Tommy, they are 3/4 of an inch wide.
@tommydolce74
7 ай бұрын
@marksslotcargarage much appreciated as my layout is getting walls.
Looking at this. I think it evens the inside / outside lane argument a bit. Thanks for showing. All I see listed is “inners” no “outers”. makes no sense.
@marksslotcargarage
Жыл бұрын
Thanks! You mean on Vipers site? I just checked and I see all the inner and outer boarders listed under tracks/accessories.