Hi . In my toyota sienna van 2006 , it has HID , where can i get connector inorder to install a normal bulb . the reason i have to replace both lenses & they so much money , a normal lense $ 90 . thanks.

Hi, im not sure how put it but do all LED'S have those connector 'boxes' because i have just bought a set and it direct H4 connectors. I want to convert to LED'S from HID'S. Its a 2008 Honda Fit Sport, Japanese

so how to do the wiring when you have hid xenon headlight with different wiring etc.. like ballast etc?

So these are plug and play no wire tapping? I have a 2012 Acura TL with 35W D2s HID bulbs. Know any resources to figure out which one and where to get them to go LED?

This video was actually really helpful!!! Thank you for making this!

@kamalnasari8632

3 жыл бұрын

I got 2 connectors $$ 18 then convert that $$825 or 2 after market ones , it is much beter . Those 2 head lights was beyond the sanding . Hee Haw 😂

@ShOookYx

Жыл бұрын

@@kamalnasari8632 from where the connector

Does that car have DRLs? I want to swap out my HIDs on my '13 mustang for some halogen style housings and use LEDs.

Sounds like your car didn't come stock with HID?? If so this video won't help. My Honda came STOCK with HID so will this still work?

Can i do that to a 2010 altima sr?

Links for the LEDs

I have a Lexus lS 460. I would have to splice wires. i wish you had shown how you did it. it should be hard. It's just black and red wires.

I have D3s bulbs in my f150 i want ti use Sv-4 leds but can't find a comparison need help lol

Thanks but how did you change the connectors to the new led style connector type ? Thanks, Gerry from North Carolina, USA

If my car came stock with HID, do I have to bypass the ballast when installing LED bulbs??

@pfoxhound

2 жыл бұрын

Yes. But now you can buy LEDs that are specifically made for hid connectors, so you just replace bulb with LED and you are done.

@DivineCarolina

Жыл бұрын

@@pfoxhound any recommendations for that kind of bulb?

@quiet_benzy

Жыл бұрын

@@pfoxhound sadly my ‘16 jeep Srt has an issue with this

@newry123

6 ай бұрын

My H I D BULBS or 35w I’ve just bought plug and play LEDs but there 105 w ,, r they safe to put in, cheers

Do you use the ballast with that kit?

@staysafe1096

3 жыл бұрын

no need ballast for LED light, ballast is highly recommended on HID.

Zip tie

Zip ties

BS, Install lamps for years, touch the lamp with oil hands wont cause any problems. may shorten the lamp life span, so car owner come back faster ...