What You Need to Know Before Change HID Headlamps to LED Headlights?
Автокөліктер мен көлік құралдары
This video tells how to choose and install LED headlights bulbs for HID headlamps conversion kits replacement. This is what you need to know before change HID headlamps to LED headlights? It is more complicated to upgrade from halogen to LED headlighits bulbs, so we recommend you check this video before purchase LED upgrade HID headlamps for the vehicle with HIDs.
Thanks for watching and if you like our videos, please give us a thumbs up, and subscribe to see more installation videos!
Пікірлер: 44
This video tells how to choose and install LED headlights bulbs for HID headlamps conversion kits replacement. This is what you need to know before change HID headlamps to LED headlights? It is more complicated to upgrade from halogen to LED headlighits bulbs, so we recommend you check this video before purchase LED upgrade HID headlamps for the vehicle with HIDs. Thanks for watching and if you like our videos, please give us a thumbs up, and subscribe to see more installation videos!
@pfoxhound
10 ай бұрын
so as your leds don`t have cooling, do how long is the warranty? don`t say that those tiny holes will let 30W of power to cool down the chip efficiently.
@CucucachooSpaz
28 күн бұрын
Wait so I went from HID to LED and installed just as shown... But I only have high beams at all times... No DRL .... What do I need a decoder??
@AllaLighting
23 күн бұрын
@@CucucachooSpaz Your issue seems complicated, we recommend you to contact us directly by email service@allalighting.com by providing below information: Vehicle's Make, Year, Model, confirm Stock lamps are halogen or HID?, any upgrade before? and the issue details, thanks in advance.
Excellent tutorial. Very simple instructions! Thank you.
Hard to find infomation on HID to LED conversion, this very informative . thank you.
@AllaLighting
23 күн бұрын
You are welcome, we are glad that it helps you.
well explained !
I have a Jaguar XJ with HID headlights and I'm looking to exchange the entire headlight units with the later J blade LED units, any suggestions on what I'd need and how to go about it?
Hey thank you for the information and I think you are doing a good job at explaining, however my brain is just too slow to get it all, so I would love to ask you a question, what would you recommend for a projector headlamp for Toyota Avensis 2013? If I'm not mistaken, the Toyota Avensis and the Toyota Versa is the same, but I could be wrong, I think this might be Metra information that I should add, I am very much loving the feature of that sudden lightning speed flick between high and low beam, but if you could do that in consideration in responding to me I would truly appreciate it, sometime please do not send me to the highly expensive product😂😂
I convetered using some d1s leds as the replacement hid china bulbs die after 8 months.
Súper!
I bought new HID HEADLIGHTS for my 2021 Dodge Charger SXT. The daytime lights and signals work perfectly fine but the Bulbs do not turn on. I am not sure if the ballasts itself doesn’t work or if both bulbs does not as well. What’s the best solution to know which LED conversion I need ?
Thank you for the video but I am having trouble finding your products. please provide a link for the product that will fit my 2005 Prius. I want to by pass existing ballast with butt connector. Thank you. I prefer to purchse off of amazon.
Hi I have a 09 mazda 6 currently it has hids would I need any modifications to go will alla leds
My LEDs work good but in my SRX I get the low beam fault. Even though they work perfectly fine
Will the computer in my 14 Tesla S be okay with bypassing the ballast.
I have a 2013 lincoln navigator that I want to put leds on. I just want my lights way brighter. Are LEDS that much brighter than HIDs?
Can you comment on 2010 Lexus GX 460 HID to LED.
Does this mean I can use any wattage size led bulb now?
Do you make or will these work on a motorcycle with an aftermarket HID conversion from original halogen
my honda crv 2012 had HID bulb , and i want to replace it with LED BULB? but i dont know what LED BULB would i get to fit with my HONDA CRV 2012 ? where to buy it ?
Wouldnt you throw a code in your SRX dash because the voltage is different and the ballast wouldnt be recognized?
Thank you for your video, unfortunately your product isn't available in my country
How does it deal with AC to DC conversion?
So I don’t need to remove my D2S ballast to operate LED’S? You have to take the headlight apart to remove it.
I have a 2013 SRX, if I did this wouldnt i get a continuos error code on the dash?
what happend if i have the ballast broke.... what i can do
This would not plug-n-play in my 2007 Prius with HID and ballast.
I was trying to do the same thing but my led buld didn't turn on, the bulb is plug n play d2s led. I Installed it to the 12v connector
@dawgitsryan
5 ай бұрын
try flipping the connector around
hi sir what is the led bulb type did you use? can i use any type? HB3/HB4?
@c7uk
Жыл бұрын
No, you need to purchase the smae model designation as your current bulbs, or they just won't seat in your headlamp
Nice video. But what about the high beam?
@wethepeople7629
11 ай бұрын
High beam is built inside the projector’s shutter. All it does when you flip on the high beam is lifts up the shutter.
@Natter20002
8 ай бұрын
not all the time. My car is separate halogen. So you fork out more money to put an LED in there. But on my car since the high beam is 12V halogen then its literally pop out the old one and put new one in making sure chip faces are at 3 and 9 and that you bought the right bulb that will plug and play. My projectors did not have a shutter that moves. That technology was newer than my car and that's what bi-xenon is. Or Bi-Halogen, or bi-LED.@@wethepeople7629
@lander77477
7 ай бұрын
Some projector headlights are low beams only, and have a separate tungsten reflector lamp for high beams (and tungsten bulbs easily convert to LED since there's no ballast). Some style of projectors use the same bulb for high and low beams, and use a movable piece of metal (the shutter) that moves up and down and simply blocks any light coming from the upper half of the beam pattern
😊
what if my ballast is not working?
@Natter20002
8 ай бұрын
He says right in the video
@flyurway
7 ай бұрын
Then hack it off and toss it in the scrap bin! They explain this in the video.
9
4:40 absolutely DO NOT USE T TAPS! i find it disgusting that an electronics company would recommend such a foolish product. They cut into your wiring if not done properly
Great video. Too bad putting LED BULBS/LAMPS into HID or Halogen reflectors is 100% ILLEGAL everywhere for on-road use, and it's incredibly dangerous. HID reflectors are not optimized for LED. Note the huge heatsink separating the LED chips? Creates dead spots and hot spots. You can see these garbage replacements a mile away. Don't provide an optimum beam, and blind the living crap out of other drivers. Want to take your SLK off-road?... all good. Be save.