Affordable Automatic Resin Wash, Dry & Cure System - Eibos Oceanus
Ғылым және технология
This is an automatic 3 in 1 wash, day and cure system for your resin 3D printed parts. You just put your part in then push start and it takes care of the rest. I'm very impressed by how well it works even with all the supports on the model.
Eibos Oceanus KickStarter - bit.ly/OceanusEIBOS
Check out my video about the BIQU Pixel L that I used in this video - • New Resin Printer With...
Other Helpful Printing Tools:
99% Isopropyl Alcohol IPA 1gal - amzn.to/3zAER7z
Medical Grade Nitrile Gloves 100Pcs - amzn.to/3PG2h19
Flush Cutters - amzn.to/3zOfIql
The Ultrasonic Cutter - bit.ly/PhrozenSonicSaber
Silicon Work Mat - bit.ly/SiliconeWorkMat
Mug Warmer for Resin Bottle - amzn.to/3QuZR6f
3D files -
Phrozen Calibration STl File - bit.ly/PhrozenCalibrationSTl
Siraya Tech Calibration STl File - bit.ly/SirayaTechCalibrationM...
BERSERK GUTS 3D PRINT MODEL - bit.ly/BERSERK-GUTS-STL
Archvillain Games - bit.ly/3zBTFTw
This was sent to me free of charge for the review but no money has changed hands and all my thoughts and options are my own.
Other Good Printer Options:
BIQU PIXEL L 9.1 inch 4K 3d Resin Printer - bit.ly/BIQU-PIXEL-L-4K
ELEGOO Saturn 8k - bit.ly/ElegooSaturn2Printer
ELEGOO Saturn S 4k - bit.ly/EleooSaturnS4k
ELEOO Mars 3 Ultra 4k - bit.ly/ElegooMars3Ultra4K
Creality Halot One Plus 4k - bit.ly/HALOT-ONE-PLUS-4K
Phrozen Sonic Mini 4K - amzn.to/3atTgIs
Phrozen Sonic Mini 8K - bit.ly/PhrozenSonicMini8K
Resin:
Conjure Resin Tough - bit.ly/ConjureResinTough
Conjure Resin Rigid - bit.ly/ConjureResinRigid
Siraya Tech Cast Castable Resin - amzn.to/3cOzMzu
________________________________________________
If you are looking for more tools and materials that I use, well you're in luck! I made a page on my website just for that.
GomeowCreations.com/tools-and...
GomeowCreations.com/partners-...
Note: Most of the links that I use that go to products are affiliate link. This means I make a small commission on anything that you happen buy using them. This is at no extra charge to you and this helps support the work I do on this channel. 😁👍
________________________________________________
Other Ways To Help Support The Channel:
My PATREON ➜ / gomeowcreations
One time support ➜ paypal.me/gomeowcreations
________________________________________________
Instagram ➜ / gomeowcreations
Facebook ➜ / gomeowcreations
________________________________________________
#Eibos #Oceanus #3dprinting #gomeowcreations
Пікірлер: 24
Eibos Oceanus KickStarter - bit.ly/OceanusEIBOS Check out my video about the BIQU Pixel L that I used in this video - kzread.info/dash/bejne/Y4eBqqmSY8_RaJc.html Other Helpful Printing Tools: 99% Isopropyl Alcohol IPA 1gal - amzn.to/3zAER7z Medical Grade Nitrile Gloves 100Pcs - amzn.to/3PG2h19 Flush Cutters - amzn.to/3zOfIql The Ultrasonic Cutter - bit.ly/PhrozenSonicSaber Silicon Work Mat - bit.ly/SiliconeWorkMat Mug Warmer for Resin Bottle - amzn.to/3QuZR6f 3D files - Phrozen Calibration STl File - bit.ly/PhrozenCalibrationSTl Siraya Tech Calibration STl File - bit.ly/SirayaTechCalibrationModel BERSERK GUTS 3D PRINT MODEL - bit.ly/BERSERK-GUTS-STL Archvillain Games - bit.ly/3zBTFTw This was sent to me free of charge for the review but no money has changed hands and all my thoughts and options are my own. Other Good Printer Options: BIQU PIXEL L 9.1 inch 4K 3d Resin Printer - bit.ly/BIQU-PIXEL-L-4K ELEGOO Saturn 8k - bit.ly/ElegooSaturn2Printer ELEGOO Saturn S 4k - bit.ly/EleooSaturnS4k ELEOO Mars 3 Ultra 4k - bit.ly/ElegooMars3Ultra4K Creality Halot One Plus 4k - bit.ly/HALOT-ONE-PLUS-4K Phrozen Sonic Mini 4K - amzn.to/3atTgIs Phrozen Sonic Mini 8K - bit.ly/PhrozenSonicMini8K Resin: Conjure Resin Tough - bit.ly/ConjureResinTough Conjure Resin Rigid - bit.ly/ConjureResinRigid Siraya Tech Cast Castable Resin - amzn.to/3cOzMzu ________________________________________________ If you are looking for more tools and materials that I use, well you're in luck! I made a page on my website just for that. GomeowCreations.com/tools-and-materials GomeowCreations.com/partners-discount-codes Note: Most of the links that I use that go to products are affiliate link. This means I make a small commission on anything that you happen buy using them. This is at no extra charge to you and this helps support the work I do on this channel. 😁👍 ________________________________________________ Other Ways To Help Support The Channel: My PATREON ➜ patreon.com/GomeowCreations One time support ➜ paypal.me/gomeowcreations ________________________________________________ Instagram ➜ instagram.com/gomeowcreations/ Facebook ➜ facebook.com/GomeowCreations/ ________________________________________________
@DifferentAverage
8 ай бұрын
@GomeowCreations, How has this held up for you long-term? Any issues?
This wash and cure station looks like a game changer. I would love to get one for my workbench.
@GomeowCreations
Жыл бұрын
Yeah it is really nice to be honest and is going to make clean up a lot easier
rally cool that you are sharing this kind of new thinking products :) great stuff!
Another great video. That woukd be a nice time saver.
@GomeowCreations
Жыл бұрын
Thanks and it definitely is.
To small first thing you'll be looking for a larger one in 3 weeks of buying it!
Would it be able to wash and smoothen other materials like abs, pla and petg ? Thanks
@GomeowCreations
Жыл бұрын
I honestly have no idea, I have never done anything like that. 😅
👍👍👍♥️
@duocmat5192
Жыл бұрын
Thanks you 👍♥️
How is it going after this 1 year ?
@GomeowCreations
7 ай бұрын
I still have it and it still works 👍
Volatile liquids, could this thing catch fire?
@GomeowCreations
Жыл бұрын
I guess it could but I believe you need an open flame to do that and this should have anything like that happening
800 isn't very affordable. at least at the time of watching this currently that's the lowest price point.
@GomeowCreations
Жыл бұрын
Last I checked this wasn't even close to $800
Have had nothing but trouble with this. Good idea but not reliable,
@GomeowCreations
Жыл бұрын
What problems have you had?
@stephenpowell5306
Жыл бұрын
Just constantly goes into error mode. If i just want to cure, it will work for a little while then goes into error mode, if ibjust want to wash it will part fill then goes into error mode. It is like program is up the shoot.
@GomeowCreations
Жыл бұрын
Have you contacted the company about this to see about getting it fixed or a replacement?
@stephenpowell5306
Жыл бұрын
I have emailed their support, but i have seen another thread from someone who had one where the panel warped. Apparently, it was a known issue and he wasn't getting any support.
@DifferentAverage
8 ай бұрын
Were you ever able to get some support or a replacement from Eibos?@@stephenpowell5306