Man! After few years of designing logos you opened my eyes! Thank You for that! Absolutely subscribing!

How do you imagine that after connecting circles and line you get a particular shape, nice logo but its not a tutorial it doesn't teach anything how to use these circles to create any other logo.

@Erraticfox

7 жыл бұрын

Sunil Barwal Shift click the specific circles then use shape tool (Shift+M)

@barwalrules

7 жыл бұрын

ErraticFox Sorry but how to figure out the specific shape when its complete mess of circles and lines. Actually my question is same as Daniel asked.

@DAINOGO

7 жыл бұрын

You need to visualize it in your mind, if you are not familiar with it i think you should sketch on paper before design, design is creative :)

@barwalrules

7 жыл бұрын

DAINOGO thanks :) using sketch that makes sense how to apply circles and lines.

@KoryGraphic

7 жыл бұрын

Yea first you do some sketches in minimal style, then you try to make it geometric and apply circles.

How do you know what you're doing? I'm completely lost till the end. Great video.

@Erraticfox

7 жыл бұрын

Daniel Sparks he's laying out circles, that part is the tricky part, knowing where to lay them. then he's using the shape tool and the (I think it's called) slice tool.

@usparks

7 жыл бұрын

How he know where to lay the circles without guides is how he looses me. using the shape builder tool is pretty understandable. Its just confusing to watch him lay the circles without guides, he's kind of a shape genius really. LOL.

@DAINOGO

7 жыл бұрын

Thanks for your question, I've envisioned it in my mind many times so I could easily make it!

@DAINOGO

7 жыл бұрын

@ErraticFox Thanks a lot!

@usparks

7 жыл бұрын

WOW!!! I guess with practice I could come close. Great video tho.

What i think they do is that first they sketch the logo the normal way to get the final idea and then until they know exactly what the logo will look like they apply the golden ratio for the correct proportions.

@DAINOGO

7 жыл бұрын

Exactly!

@ebitlagger8840

6 жыл бұрын

I found out that logos that were sketched normally usually had the portions that were close to Phi and not just me my friends found the same things too, guess that we just genetically like it

great man!!!! awesome

Balo hoyce

Wow, very inspiring, beautiful job

hi from italy. it's a great work. you opened my mind, dainogo. subscribed

Awesome job! I will try to apply this to my workflow. Subbed!

mastery .... intriguing to watch!

@DAINOGO

7 жыл бұрын

Thanks a lot!

Wow! This is so therapeutic! Love it!

You're an absolute inspiration for the design world mate! Keep it up thank for sharing your work

I got myself a bit lost here but I think with some practice using golden ratio circles we all can create something very nice, this ratio gives a very good pleasing viewing of things =D Beautiful Design, I loved it!

It's amazing! Thank's very much

Grazie infinite ho imparato molto, se tu dovessi fare le lezioni a pagamento non ci penserei due volte a venire da te, grazie a KZread tu hai condiviso la tua passione e insegni agli altri... dove la quale faranno la stessa cosa che hai fatto tu, ottimo, bravissimo. È un peccato che non parli la mia lingua comunque very good lo so dire 😂 mi sono iscritto.

This guys the oracle of shapes I swear

This is incredibly insane! So amazing! If I could easily do these calculation, the rate of my works would goo up too gast! This takes so much time and dedication! So perfect, so great!

Thanks man, now i get it how GR is functioning. Great visualization

Awesome video! Keep it coming!

Even the back up you did with no gradient looks nice.

Like a wizard. great job!

@DAINOGO

7 жыл бұрын

Haha, thank you!

Just stumbled across this video .. instant subscribe! Great work!

Wow! that was amazing!!

so cool

This. Was truly amazing...

awesome, totally inspired . keep it on!

Omg this is wonderful!!!!

awesome this video, thanks you...

Awesome!! :D thanks for sharing

This is so cool

And they still complain about why logo is so overprice

I followed this tutorial tonight . And blue whale tutorial last night . I'm a beginner . I have a question that is it true you put circles first and then generate a animal logo? It's incredible I think . Amazing.

I love this video! I am trying to follow it though and when I go to shape builder it's not letting me just delete the lines, it turns the shapes black and then doesn't let me delete them. What should I do?

@DAINOGO

7 жыл бұрын

You need holding "alt" and left click

Great design. I would try to find a way to get the e closer to the d though. Must be a way, using the circles.

Thank you for the tutorial!

Great work, subscribed.

@DAINOGO

7 жыл бұрын

Thank you!

hi, i really like your method, great video, i just have one question, is there no easy way to get rid of those orphan anchor point, and get a clean vector ? or you just have to laboriously remove them one by one and keep adjusting the curves all the time ? because i really can't imagine myself pulling that without wasting a ridiculous amount of time.

When I use the shape builder tool my edges are very rough and jagged, and there's bits of "lines" sticking out. How do I get all the circles to snap like yours

superb!

Amazing job!

@DAINOGO

7 жыл бұрын

Thank you!

Thanks so much for the video! Logo looks awesome. I wish could design logos better (

How do you do it without a sketch?? Great video.

simplesmente fabuloso.

@DAINOGO

7 жыл бұрын

Thanks mate!

I'm having a lot of trouble with the shape builder tool. I'm doing 100% the exact same thing as every video but I get for every click tons of extra anchor points in my path. Besides that when I click some parts away (holding alt offcourse) the whole cirkel gets deleted. So, what are the common mistakes using this tool and how to solve them?

@DAINOGO

7 жыл бұрын

You must press "Alt" and click to delete

@bram8155

7 жыл бұрын

Thanks for the quick response, but like I just said, 'clicking holding alt' read it again haha. I'm doing exactly that and I keep getting extra anchor point added. So much that they create tiny spikes... I hope that there is someone with the same problem or I have a few bugs in my version of illustrator :(

@DAINOGO

7 жыл бұрын

Haha, sorry about that, you can send me a screenshot to my email.

@Chrisdgallego

7 жыл бұрын

maybe you have the caps lock key activated?

@bram8155

7 жыл бұрын

mmh yes I think I did have my caps lock on. just tried it again but still the program gives me extra anchor points and the path of the cirkels also changes a little everytime I click

Great video. I want to design like that. But why we need to use those circles and we can get the same result using pen tool. so why?

yea.. if you can tell us how you do it.. because I use sketches and even tho i get lost

@DAINOGO

7 жыл бұрын

You need more time to get used to it, do not rush

Very cool.

@DAINOGO

7 жыл бұрын

Daniel Beeler thank you so much!

Great you have an your own style keep it up i belive that you will make whatever you are dreaming of if you continue doing that and upload more

@DAINOGO

7 жыл бұрын

Thank you so much! I love your works

great video.. :D

you earned a subscriber. :)

How do you practice to make animals in the circle? It's really cool. Your golden hand

Very impressive!

@DAINOGO

7 жыл бұрын

Thank you for comment!

Please make your channel logo tutorial please

really impressing

Great!!!

really amazing , what kind of sorcery is this ?

Nice logo but not quite sure if you could call this a tutorial... Perhaps you should have sketched a rough DEER shape on a piece of paper and then bases on that you could have created your circle guidelines, then people would have grasp the entire thing right from the start I'm a graphic designer myself and I know these techniques but for beginners it's not that obvious what you're trying to achieve here my friend All the best and hope you follow what I said as a guideline for your next video tutorial Cheers

okay the video is amazing and the technique is very impressive but I would prefer if you showed us step by step how its made since its a tutorial

Yes, the shape builder is pretty simple. The hard part is the one that nobody wants to explain: how to align the circles in a right way? How do you know the right position of lines and circles, to get the right pieces of deer? The answer is pretty simple: You must be able to sketch a deer design with some paper and pencil. Than you can fine tuning your design with some compass made circles. One you´ve done, pick a photo and import in illustrator. try a lots of times, and then try to memorize the main shape. That´s it. Aren´t you able to draw a deer with a pencil? Search for some similar photos, over the net, and import in AI. Put some golden ratio circles around the picture. Try to keep just the main parts, and delete the rest. Remove the background pictures, and use the shape builder to forge the shape.

@strong8705

5 жыл бұрын

Value of golden ratio is so vague, now using parts of it's parts is some kind of magic. Nobody notices when it starts/stops to affect overall impact.

Did you know you wanted to make a deer logo before you started? My guess is that you place circles while telling yourself where lines can connect to create the shape of the mark you want. It takes practice to work like that, but I'd rather sketch my logo so I feel more confident.

Whats the the name of the first song?

how can i learn totally this kind art? any book of this kind arts?

very impressive :P!

@DAINOGO

7 жыл бұрын

Thank you!

do you have any other music?

Very cool

@DAINOGO

7 жыл бұрын

Thank you so much!

This N* has the SHARINGAN!!!

where is the gradient #dainogo?

Is there a way to work like you did but without having so many anchor points?

@DAINOGO

7 жыл бұрын

You can reduce anchor points with the command Object > Path > Simplify

@logosagacom

7 жыл бұрын

does that will change the overall shape?

@DAINOGO

7 жыл бұрын

If you want to keep the same shape, choose 100%

where download the golden ratio ?

@97gile

7 жыл бұрын

well you can make it your self. It's very simple I'm sure you can find someone on google who can explain it better than i can. But the basics are that you start of with a square 1 by 1 (doesn't matter which unit you use). Now copy that square and place it right beside it then make a square of 2 by 2 and place it aligning to the two squares before it. and repeat this as much as you want where the dimensions of the squares go as follows: 1,1,2,3,5,8,13,21.... And lastly the spiral follows the square edges and the circles have the same dimensions as the squares.

Ohh now I get it kinda this guy/girl is a god

"parabéns

wanna konw your music name

Great work, The tutorial is not detailed enough, it was difficult to learn

It‘s sort of bothering me, that you only put a little space in the first „E“...

I think you should teach us how to make simple shapes using these circles first.

great technique. but aren't you highbrow ? would have been a lot helpful to the community if you describe the process verbally.

Can you share music link please?

So you don't do any sketching, you start directly putting circles here and there.

@DAINOGO

7 жыл бұрын

No, I sketched and designed it before

@annasfbi

7 жыл бұрын

Ahh that's make more sense, thanks for the response sir.

ual!!!

song name please..

4 years of university in a 21 mins video.

@joydivision1970

7 жыл бұрын

If this work (that isn't executed very well, by the way) stands for 4 years of university ... that would be very sad, man. :(

Oh Naruto ost

I still can't understand how could you see the deer in the circles

Great video though my head is spinning now lol.

You need to talk in your videos. Great design but pretty useless if you can't communicate your ideas.

@factopolis7752

7 жыл бұрын

Eddie Vargas that's what I was thinking because even though everyone is saying good job with the design the description said tutorial...........he tutored me not

half-baked

what kind of witchcraft is this!? I was found now I'm lost

Wow this was intense! But of course not for you!

nice video but overly complicated to be considered a tutorial.

For a concept like this, don't you think explaining what the hell you're doing just throwing a dozen circles together on the screen? How does a beginner to the Golden Ratio know how to align the circles brah?

not make sense for me its looks so boring ./.

Meh

phi=god