This is a short video describing how I add feeders to the underside of the rails on KATO Unitrack
Жүктеу.....
Пікірлер: 27
@andrewk5547 Жыл бұрын
Great video - and looks easily like the best solution! Also thanks for the 'straw-in-the-hole' tip - love that.
@shteviemac8310 Жыл бұрын
Wow that's so helpful, I'd worked out something similar involving dremel filing some plastic off the back, but your system with the paste is brilliant, thanks for sharing 👍👍
@PracticalEngineeringSolutions
7 ай бұрын
You are welcome
@garyforestier11187 ай бұрын
Great technique. I'm going to try it out myself
@PracticalEngineeringSolutions
7 ай бұрын
Go for it!
@hirstyboy973 ай бұрын
Great tutorial 👍🏼👍🏼
@markgershman15632 жыл бұрын
Very nice video. It's probably the best connection you could make to a Kato track. All the others that I've seen wouldn't last as long as yours. GreatJob! I'm just starting to put my track together. I'm sure this will work just fine. Thanks again for the demonstration. Mark G.
@PracticalEngineeringSolutions
2 жыл бұрын
Glad you liked it. Subscribe if you want to more videos coming out
@kevincollier4147 Жыл бұрын
Thanks for a great demonstration!
@NorthernBandit15 ай бұрын
Straight forward. Brilliant!
@ronhart41662 жыл бұрын
Thanks for sharing !! Perfect idea 👊
@PracticalEngineeringSolutions
Жыл бұрын
Any time!
@rokk7062 жыл бұрын
Great video sir... I will be using this technique. Thank you kindly
@PracticalEngineeringSolutions
Жыл бұрын
You are very welcome
@buster3491002 жыл бұрын
Clever
@LeonKolenda8 ай бұрын
Well as much as I wanted to learn this and save some money, I can't do it. I made the little right hook on the ends of the wire, but could never get a large solder blob on the end of the wire, using plenty of flux paste! I then got one wire to get some solder but when I tried to solder the wire like in your video it burned a hole in the track and never could get it to solder. 2-3 seconds max. My soldering iron is a cheap one, but it works, I burned my fingers 3 times! LoL! I 'm using tinned 22G solid wire. I guess soldering is just not for me. I can't imagine trying to do this under a Grid or table.
@PracticalEngineeringSolutions
8 ай бұрын
The procedure can only be done on the bench and you need a magnifier at least. Maybe try a better, smaller soldering iron and try a different brand of wire. Also dip the hook into the soldering paste. You should be able to get a tiny blob on the hook.
@stevetandysr.2816 Жыл бұрын
Thanks for the tip . Just starting in model RR with N gauge . Nice Shack . Steve N0SLT
@PracticalEngineeringSolutions
7 ай бұрын
Glad to help
@LeonKolenda8 ай бұрын
Why do you Tin the hooked ends, when the wire your using and suggesting is already tinned?
@PracticalEngineeringSolutions
8 ай бұрын
The tinning on the wire is a thin coating and not enough to stick the wire to the rail. So I put a small blob on the wire.
@LGuitarjsm6 ай бұрын
Hi I learned a lot from your video I am a total newbe Does it matter which side of the track is red or black wire? Also as a starter can I already buy this pre down and if so can you please share a link
@PracticalEngineeringSolutions
6 ай бұрын
No it does not matter as long as you are consistent. Black on the same rail on each piece of track. I do not of any tracl that is sold that is pre-done
@NHseacoast3 жыл бұрын
Ok 👍 how do you crbbfcybyour feeders to the bus do you solder again? Or use suitcase connectors?
@PracticalEngineeringSolutions
2 жыл бұрын
Solder the feeders to the bus. more reliable
@PracticalEngineeringSolutions3 жыл бұрын
I solder the feeders to the bus
@SvenTSchixe
Жыл бұрын
Good morning, What is the "bus"? Thanks in advance, 🇨🇦 🍻 🙏
Пікірлер: 27
Great video - and looks easily like the best solution! Also thanks for the 'straw-in-the-hole' tip - love that.
Wow that's so helpful, I'd worked out something similar involving dremel filing some plastic off the back, but your system with the paste is brilliant, thanks for sharing 👍👍
@PracticalEngineeringSolutions
7 ай бұрын
You are welcome
Great technique. I'm going to try it out myself
@PracticalEngineeringSolutions
7 ай бұрын
Go for it!
Great tutorial 👍🏼👍🏼
Very nice video. It's probably the best connection you could make to a Kato track. All the others that I've seen wouldn't last as long as yours. GreatJob! I'm just starting to put my track together. I'm sure this will work just fine. Thanks again for the demonstration. Mark G.
@PracticalEngineeringSolutions
2 жыл бұрын
Glad you liked it. Subscribe if you want to more videos coming out
Thanks for a great demonstration!
Straight forward. Brilliant!
Thanks for sharing !! Perfect idea 👊
@PracticalEngineeringSolutions
Жыл бұрын
Any time!
Great video sir... I will be using this technique. Thank you kindly
@PracticalEngineeringSolutions
Жыл бұрын
You are very welcome
Clever
Well as much as I wanted to learn this and save some money, I can't do it. I made the little right hook on the ends of the wire, but could never get a large solder blob on the end of the wire, using plenty of flux paste! I then got one wire to get some solder but when I tried to solder the wire like in your video it burned a hole in the track and never could get it to solder. 2-3 seconds max. My soldering iron is a cheap one, but it works, I burned my fingers 3 times! LoL! I 'm using tinned 22G solid wire. I guess soldering is just not for me. I can't imagine trying to do this under a Grid or table.
@PracticalEngineeringSolutions
8 ай бұрын
The procedure can only be done on the bench and you need a magnifier at least. Maybe try a better, smaller soldering iron and try a different brand of wire. Also dip the hook into the soldering paste. You should be able to get a tiny blob on the hook.
Thanks for the tip . Just starting in model RR with N gauge . Nice Shack . Steve N0SLT
@PracticalEngineeringSolutions
7 ай бұрын
Glad to help
Why do you Tin the hooked ends, when the wire your using and suggesting is already tinned?
@PracticalEngineeringSolutions
8 ай бұрын
The tinning on the wire is a thin coating and not enough to stick the wire to the rail. So I put a small blob on the wire.
Hi I learned a lot from your video I am a total newbe Does it matter which side of the track is red or black wire? Also as a starter can I already buy this pre down and if so can you please share a link
@PracticalEngineeringSolutions
6 ай бұрын
No it does not matter as long as you are consistent. Black on the same rail on each piece of track. I do not of any tracl that is sold that is pre-done
Ok 👍 how do you crbbfcybyour feeders to the bus do you solder again? Or use suitcase connectors?
@PracticalEngineeringSolutions
2 жыл бұрын
Solder the feeders to the bus. more reliable
I solder the feeders to the bus
@SvenTSchixe
Жыл бұрын
Good morning, What is the "bus"? Thanks in advance, 🇨🇦 🍻 🙏