Yes finally! This is a Monday night build series in Australia!

@James-uc2nd

8 жыл бұрын

yeah m8

@ItsLost

8 жыл бұрын

yeah i was like no vid and clicked sub box and see it time for my Milo

@deadeyenic6833

8 жыл бұрын

Good to see a fellow Aussie in the comment section

@connorwalter9057

8 жыл бұрын

TRUTH

@ericmetcalf861

8 жыл бұрын

Oi Oi Oi!

The wait between episodes is so difficult but so worth it! Keep up the good work man.

@motonosity

8 жыл бұрын

Thanks man :)

Lookin good except for that bit on the caliper,I imagine it'll just blend in once the shrink tubing is on there though :)

Love watching your build. I'm also creating a supermoto, but from an 07' CRF450R. I hope mine looks like yours when im done, minus the powder-coating. Too jealous of that!

The super moto build is coming along great, you are so meticulous with your work and your bike is turning out awesome because of that. Also I love the tunes that you play in these videos too

I love this series, keep it up motonostiy👍🏼👍🏼

@motonosity

8 жыл бұрын

Thanks man :)

The editing and work gone into the camera angles makes this series so much better!

@motonosity

8 жыл бұрын

Thanks Jon!

Hey Motonosity! Your build videos have really inspired me to convert my Honda crf125f into a supermoto.

@motonosity

8 жыл бұрын

Awesome!

I'm actually loving this build series!

When the front suspension compresses, won't the wire that runs up the brake line and behind the number plate be out of whack?

@taxijackmusic

8 жыл бұрын

yep hopefully he reads this comment.

@Germaingazm

8 жыл бұрын

As long as their is slack at the top bit near the number plate it'll be fine, I've got the same one on my WR450SM :)

@aidanvelthuis1267

3 жыл бұрын

Never had that problem on mine, it moves freely

Literally bike goals, I don't know how you have the time considering everything else you do. The looks amazing though bro

I really can't wait until the bike is finished

This exactly what I needed to see to mount something on my bike

Looks great!

I love this series. Next series NEEDS to be a CRF 50 replica build to the 450. That would be awesome. Just an idea

@motonosity

8 жыл бұрын

You're the first person with that idea and I love it!

@imdestructive7624

8 жыл бұрын

Motonosity I love crf 50's, there are tons of motor swaps that bolt in, and you can get just about everything for the bike because there are so many aftermarket parts for then.

Looks so good👌

I love love love love love this supermoto.

Is the speedo like fully water proof say I put it on a quad that goes snorkeling

What did you do about the security of the bike since it is kickstarted and all

Bro make your vids longer and add more content please lord

@kennys87

8 жыл бұрын

Adding a Taillight to a DIRT BIKE [Supermoto Build Part 53] 😂😂😂

@y0tam1

8 жыл бұрын

+kennys87 Replacing a Spark Plug [Supermoto Build 794]

@kevinssoloobeasley3365

8 жыл бұрын

+Yotam K Washing my supermoto after a dirty Sunday with friends [Supermoto build 879]

@y0tam1

8 жыл бұрын

+kawasexy Choosing New Valve Caps [Supermoto Build 986]

@kevinssoloobeasley3365

8 жыл бұрын

+Yotam K Putting gas on my bike [supermoto build 1003]

looks good!!!

Looking super clean as usual!

@motonosity

8 жыл бұрын

Preciate it man. Home stretch.

I like the brake line run up the inside as you had it

bikes looks good !! great video dude

FINALY! I was thinking you have up on he build lol

Do you have link to the sensor? Or does it come with the speedo?

where can I get that light bar mount?

We are waiting for test ride!!

makes me wanna build my own so badly !

the bike is looking great

its getting close!!!!!!!!!!!!!

@motonosity

8 жыл бұрын

I miss you :(

Is the sensor you put on the brake calliper heat resistant ??? Because if you go on the track the temperature will raise!!!

hello ;) I have one question do you think this speedometer will work on Honda cbr 125r 2005?

I stayed up all night waiting for the vid

Hey, awesome job. Been watching all the vids today. I have a 2014 husqvarna te449 I picked up for a great deal. I'm going to upgrade the dash. Does this trail tech show RPM's? I also like how you did your light. Does that light work well? I might just put a bar light and light eliminator on myself.

Could you give us a link to those fittings you ran zip ties through on the back of the Trailtech? Thanks!

how does the tach work ?

What were your thoughts on using an LED bar as a headlight? Does the light spread have a hard cutoff to avoid dazzling drivers?

Hey Brent do you think when you finish your build you can discuss how much went into actually building it from ground up? I just got my M1 and i really want to learn more about bikes by building my own Supermoto. Im still in college so money is tight so i wanna see if this is a viable option! thanks!

do you think this speedometer will work for a Honda cbr 125r 2005??

look forward to the sumo build every week

how well does it work? and how accurate is it?

I installed a trail tech and ran it behind the numberplate and from it moving with the suspension it began to chafe. So put some sort of cushion on the edge of the number plate to protect it.

Motonosity you definitely need to sell shirts like the one you have on in this video!!

addicted to this series. shout to scotland

@jackscales4418

8 жыл бұрын

I'm from England and so am i

@almondvision

8 жыл бұрын

+Jack Scales 👍

Just out of school looked at my phone and this was up😍

@rene.tarasovic

8 жыл бұрын

out of what???

Won´t the speedo cable snap when tied to the brake line? Happened to me many times while doing wheelies. That part moves a LOT.

oh right when I wake up good timing

@PopVtecZ

8 жыл бұрын

Ikr

does the trailtech give you mpg

Ahhhh, the glorious 450😋

This bike is looking SO beautiful right now. I'm getting the tingles in my pants. I'm sure fry feels the same. Good job on that fender and the clean as hell speedometer mount job! Keep the build videos coming

Just sat down and im watching the whole series in a row, and i wanna do this with a 2002 yz250f with a small back sprocket (39 tooth) and brand new plastics

good luck on the meeting! i wish i could have the chance to come..

Are you gonna cut more off the front fender on the bottom?

you were 6 hours late, that's illegal in my country

@PopVtecZ

8 жыл бұрын

Ikr

@QuattroRMT

8 жыл бұрын

wut? why is that illegal? it's not dangerous... it's actually helpful

@jamilwatts5532

8 жыл бұрын

+QuattroRMT bro just a prank bro

@QuattroRMT

8 жыл бұрын

Jamil Watts k

@brianmckeown70

8 жыл бұрын

+QuattroRMT he is 12 hours late for me😢

lololol at the Scott Elder comment. Holy crap, that had me in stitches. I suspect you have to be a local to get it though.

@jareds9083

8 жыл бұрын

those commercials play on the radio in Waco... They are the worst, thanks Fry.

@mannydcbianco

8 жыл бұрын

Jared S They really are awful.

In next weeks series: "Adding air to the tires.[Supermoto Build Part 13]" Whyyyyy is this taking so loooonng??

@TheGodGamer55

8 жыл бұрын

He's trying to have this short and sweet as to not overload the people trying to make one as well. Lol I dunno

@motonosity

8 жыл бұрын

It's called life.

@TheGodGamer55

8 жыл бұрын

+Motonosity oh yeah true but the moto is looking good!

I just have a feeling you are going to wreck this bike so hard when it is done! lol Love the series

@motonosity

8 жыл бұрын

And I'll pick it right back up cuz it's a supermoto haha :)

mint

a ktm exc mask instead of the lightbar would be badass

Is the speed sensor mounted inside-out? The way it's shaped it looks like it should be pointing the other way. Might still work fine, depending how strong the magnet is and how sensitive the sensor is.

How to connect each wiring of speedometer,...?

Can this be fitted to a 125 pit bike?

Fry makes this series for me haha

When you run out of content and still have to post vids...just messin with ya, coming along looking pretty nice!

I bought 2016 Suzuki drz 70 for my son and he is asking me to add speedometer do you think this Vapor would work with my son’s bike?

you should put dielectric grease in those wire plug connections. that'll keep moisture out and help prevent corrosion.

Thank you for putting the line on the outside

Notifacation squad

I am surprised you didn't mount it inside one of the floater slide pins(open rings holding the rotor in place-not sure if i named it correctly).

as someone else also commented u might think about running that speedo cable the rest of the way up ur brake line u have to figure both cable will travel up to12" upwards with the front wheel and with it behind the number plate might not work so well

Dude your making my dream bike looks great in white and red but I would have done white and blue or red and black but you pulled off the look with the frame aka I would have polished the frame and swing arm

Clean as fuq man

Nice man. Not too far now.

This build is taking so long

@mrgdc343

8 жыл бұрын

true

@shannonscott5788

8 жыл бұрын

He is either low on funds or slow as a turtle. Either makes it boring nor interesting

@dedelabinouze5110

8 жыл бұрын

Try to build a bike yourself first, you'll reconsider your comment.

@9mmArts

8 жыл бұрын

+Shannon Scott its the editing/rendering which takes time

@brianmckeown70

8 жыл бұрын

+Dédé LABINOUZE so your saying he is building it fast?

I feel like you have to be an Austinite in order to get that Scott Elder reference. That said, I got my car there... lol. Love this series!

@motonosity

8 жыл бұрын

haha thanks bro

Does it work?

Man i love that background music! Where do you get most of your music from if you don't mind me asking?

Is the sensor wire going to be okay, given the high temperatures found in the braking system? A good idea would be some braided sleeving to disguise and protect the delicate cable and connector, and it would look better than a wire piggybacking the brake hose..

Motonosity Awesome series, I might be wrong but it looks a lot like your front brake line is installed upside down. Also routing the brake line around the outside of the shroud has no benefits compared to routing it stock, just eases the mind. Loving the way she looks, keep it up man.

@motonosity

8 жыл бұрын

It's definitely not upside down, but thanks for the concern :)

we waited a week for a 9 minute video, and a 3 month bike build and counting😭😭😭

@cateatsushi3008

8 жыл бұрын

i know shittt

Bike looks sick! You should put the Rocket Exhaust dual pipes on it

@vanseba9941

8 жыл бұрын

Dual pipes are ugly especially in super motos! Just my opinion tho

fry is such a savage lol

Just wondering why didnt you guys put the magnet in the holes on the disc? Ive got my magnets in those holes and they sit there really good :)

@motonosity

8 жыл бұрын

With the adapter for the bigger rotor, the actual caliper (and thus, sensor) sit too far away

7:09 haha Fry got you in yo bathroom!

good series man job well done and MR fry if you added content to your channel some people like me would watch it you know a subscriber. now the being said can not wait of the rest of the little things to be done and you get to go for a brappppppp

@ReconsOfficeal

8 жыл бұрын

braappppp brapapapapapapap braaapppppp brapapapapapapa braaappppp

@jesteris25

8 жыл бұрын

lol smart ass lol made my morning

Link for light bar please

So I'm trying to do the wiring on my own bike but I'm getting confused on the entire mapping of the wiring. Could you dedicate part of a video showing which wires go together? Btw it would help you get one more person to the Austin meet up this year :D

I think a motonosity logo right under your light bar would look sweet

This makes me want to be a Motorcycle Mechanic lol

sweet! trying to get a super but these damn bills #tough

Red forks would look bomb!

do your bike have battery? can i install universal digital speedometer without battery?

@motonosity

6 жыл бұрын

Yes it does, but yes you can!

what did you have to do to legalize the bike as street? ...I really wanna do a build but don't know if I could even register it

@vanseba9941

8 жыл бұрын

Watch the first videos to find out

could you do a video on adding a fuel gauge on a 250 dirt bikes?

Looking all your videos from Costa Rica. Saludos

@motonosity

8 жыл бұрын

Thanks!

I'm loving the build so far but could you make the videos slightly longer because I get so hyped on Sunday and then this time it was just 10 minutes, keep up the good work.

@motonosity

8 жыл бұрын

Doing my best man. I can only include the work that I was able to complete during the week. Sometimes I don't always have a ton of time to dedicate to build unfortunately.

👍

push the wire around the inside of the brake line and get rid of the connector, just solder them and shrink tube, one piece to the top, clear red etc, hides the braided line but. may clean it up how you want

I recently unhooked my speedo to take my bars off, and after putting it back on it doesnt want to turn off, what tf could be the problem?