Your tone and the delivery made this easy to understand and made it way less intimidating

@Teach2Build

Жыл бұрын

Glad to hear it. Hope your projects go smoothly.

This made something that seems so intimidating seem not so scary and totally doable. Thanks!

I am definitely confident enough to tackle this job after watching this video demonstration. Will save me thousands of dollars!

I'm going to be doing this under a 120 gallon aquarium. Perfect video. Thank you!

Love your calm presence and understanding teaching style. Awesome video and very helpful.

@Teach2Build

Жыл бұрын

I appreciate the kind words! Best of luck on your projects...

Absolutely outstanding tutorial. Best I've seen on KZread. Thanks friend!!

@Teach2Build

5 ай бұрын

I appreciate the kind words!

Perfectly explained! Thanks for the great video!

love watching your videos man. Your channel is very underrated.

@Teach2Build

2 жыл бұрын

Definitely appreciate it. Lots more to come!

thank you so much for sharing your knowledge. I just bought an old house that needs some crawl space TLC. Now I got an idea on how to do the job.

Thank you so much. I' m going to follow you step by step. Wonderful video!

Great video thanks!

Nicely done !

Thank you , very clear demonstration

Great tutorial! Thanks!

Wooden beam should have the screw adjuster at the bottom against the footing on the bottom with the wider surface area of the pipe against the wood, the way shown works fine for a steel beam

Wow amazing presentation. Subscribed!

@Teach2Build

2 жыл бұрын

Thanks so much. Watch for more and more new content!

Yup, thank you

Some people won’t even attempt this. 😂 my home has old chimney brick and mortar supports which is crumbling. I can’t even get a contractor to do this job in our city. So the burden is left with me. Which I’m fine with 😊 I am a female who loves doing manly jobs including car repairs. Thank for showing me how these jacks work. 👍

@patrioticmisinformation7184

7 ай бұрын

It’s probably a liability thing for contractors. You can do it though!

The beams need replacing beneath the wall running with the floor joist not under the joist.should I build a beam setting right under the floor then replace the damaged beams ?

What is the name of the specialist that you are referring to?

Thanks for the details and great illustration! I've read that "jack posts" are not recommended as permanent supports but rather temporary to raise or level floors and then replace then with appropriate material supports (lally post, wood beam, concrete ...etc.). I have two jack posts (16,000 lb capacity ea.) in place right now to slowly level the sagging floor. Once it is levelled, I was planning to find out what best material to use to replace the jack posts for "permanent" support. Your thoughts on that please. Thanks.

@Teach2Build

19 күн бұрын

The posts used in this video are code approved for permanent use if installed properly, but if you're looking for an alternative, cedar or pressure treated 6x6 posts can be used as well.

@brucegraham4142

17 күн бұрын

@@Teach2Build Thank you for your quick response and guidance. Much appreciated!

My floor joists are 2x8 (undersize in my opinion) and they need some support. The previous owner tried to do this by sitting concrete blocks on top of the pea gravel and putting the jacks on top of the blocks. A couple of them have fallen out of place. But it seems to me that if the concrete block just sits on top of the ground it will heave with the weather, especially in the winter. Wouldn't those support blocks need to be dug into the earth to prevent heaving? I have also thought about sistering some of the joists to strengthen the floor.

@Teach2Build

Жыл бұрын

Heaving can be a concern, and my experience only goes as far north as Tennessee, so you may be right in that circumstance. Get an engineer in your area on the phone for two minutes and get his thoughts. If it's a concern, you'd have to go pretty deep to pour below the frost line, making for a tough project! Sistering, when done right, is a very good solution, yes!

@bend4852

10 ай бұрын

Since you have a crawlspace you're gonna have to dig a hole down there and pour a footing a foot deep at the very least and be sure to tamp down the dirt really good and maybe put in some pea gravel before pouring the footing

@charleswilson4598

10 ай бұрын

@@bend4852 Yes. I know what needs to be done and if I was 30 years younger I would probably try to do something about it.

if you want to support or lift joists across 45 foot span would 10ft 4x6's be just a stable as 10ft 6x6's? (seems like there is more area on the 6x6 to provide stability to the jack or is that just irrelevant?) I'm planning on using two pole jacks per board placed 3.3 ft from each end. (thirds theory) I'm lifting the sagging joists due to a crushed center beam. Which will be replaced after the house is level again.

@Teach2Build

2 жыл бұрын

Moving up in beam size is never a bad thing! That being said, a quick web search for a beam span table will help you narrow it down, also.

@lizannelorusso6221

2 жыл бұрын

@@Teach2Build thank you!!

Do you anchor the jack to the solid concrete pad with some kind of screws at the bottom? Or do you just consider the weight enough hold the bottom of the jack in place on the concrete pad?

@Teach2Build

2 жыл бұрын

While there are plenty of supports like this that are just sitting on the pad, I usually use some Tapcons to keep it locked in. Best of luck with your project!

@milespauli8308

Жыл бұрын

if this is going in a crawlspace with some stone under a vapor barrier (radon mitigation sheeting) can I just lay the thick concrete paver down on the ground? level it and tamp it down and then start? I imagine it's going to press down pretty hard as soon as I start putting tension on, but I imagine it will find its natural low spot..

@danmcgher6057

Жыл бұрын

@@milespauli8308 Concrete pavers don't have the same crush resistance as irregular small/medium crushed gravel. Dig a hole, fill it with that, compact, then place the paver. IMO, I'd consider pouring a concrete footing/post heavily. Main reason is that you want any support structure settling to occur evenly and on balance as you slowly jack your home. Concrete pads alone run the risk of throwing forces off tilt. I've only done bedrock posts under a garage slab, so by no means an expert but hopefully food for thought

why use pressure treated lumber?

So 1 floor jack is good enough for this support beam? How long should a support be before you add a 2nd floor jack? Thank you for the instructional video

@Teach2Build

5 ай бұрын

Usually, I'll add an additional jack for every two or three floor joists.

awesome vid. Question...I'm installing a 500 lb. wood stove in my 1878 home on the first floor. All I want to do is put a little support so my floor wont sag with the extra weight. My Joists are 2 1/4" x 8 " 16" apart. their in good condition. So I will need tall floor or screw jacks to do this. I will be spanning 3 or 4 joists. Do I need 2 jacks or would one be enough to help with the 500 lb stove ??

@Teach2Build

Жыл бұрын

I would use one if you can get it centered directly under the stove. Otherwise, use two to be safe. Best of luck with your project!

@CMS069

Жыл бұрын

I'd use 2

Very Good!... 10 🐄🦉🏴‍☠✝

Do you have a link to these jacks? Everything at Home Depot/Amazon seem more complicated/expensive than the jack you are using. Thanks!

@Teach2Build

Жыл бұрын

This is the type in the video. Make sure you get one in the correct height range for your project! Tiger Brand Jack Post JS-36 1'7"-3' (15 Ga) a.co/e4YP7hZ

@fernandowhite7424

Жыл бұрын

Thanks!!! I really enjoy your videos!

Hi, is a solid concrete pad required if I am going to place the Jack in my basement? The Jack will be about 8 ft long without the concrete pad.

@Teach2Build

2 жыл бұрын

That depends on the thickness of the slab in the basement. If it's not of an appropriate type or thickness, you could end up just damaging the slab. You might want to talk to a local engineer. Best of luck.

@benhodge8128

Жыл бұрын

Just use a treated 2x8 Or 2

@mangos2888

Жыл бұрын

​@Ben Hodge why would 1-2 treated 2x8s be better?

What if the the 6" carrying beam is missing is 2ft. a quarter way through and the 8" joists aren't level to left ?

@Teach2Build

29 күн бұрын

Sometimes, a simple, straight beam isn't right for the situation. If it's going to require an elaborate solution, might be worth getting an expert opinion!

😎✌️

Do you have a link to the floor jacks?

@Teach2Build

3 ай бұрын

The one used in the video was from Tiger. They're available just about everywhere, but you'll need to search your local supplier's website to be sure. Best of luck with your project!

@LarryMcDonald08

3 ай бұрын

Thank you.

You didn't incorporate the concrete block you just left it off to the side

He said go take care of it I know you got better things to do.

Awesome., Thank you for the video.... Mwahahaha.

He said "Chutzpah"

How come they never show how to support with ANGLED new supports in angled roof parts that people ACTUALLY don't know how to do?This isn't rocket science and similar repairs are all over KZread.

@Teach2Build

6 ай бұрын

Hey Dorothy! This video has a narrower focus. I'll add your recommendation to the list of future videos. Thanks!

THANKS