Anycubic Kobra Max: www.anycubic.com/products/kobra-max 3KG PLA Filament: www.matterhackers.com/store/l/black-mh-build-series-pla-filament-175mm-3kg/sk/MPTXV94Y?aff=7553 Bambu Lab X1C 3D printer: www.matterhackers.com/store/l/bambu-lab-x1-carbon-combo-3d-printer/sk/M80GDCL5?aff=7553 MANITYA Small Dehumidifier for Bedroom 580 sq ft: amzn.to/473UXFw Adam Savage Temporary Ruler Tattoo: tested-store.com/products/adam-savages-temporary-ruler-tattoo

@smartinsilicon

9 ай бұрын

Hi, great build! You might have some issues with vibration of your print tables. Even partial mm of vibrations will impact build quality. The Bambu Labs X1 Carbon has input shaping that might trim this effect, but I would make my table very rigid and firmly planted. Hope this is constructive, big fan.

@ET_AYY_LMAO

9 ай бұрын

Hi Adam! I would love if you could elaborate a little on your 9/11 mythbusting episodes, I found those episodes you made dumbfounding. You taught millions of people that you can't cut even thin steel sheet with thermite, I believed you for DECADES, I believed that it was a silly idea that Thermite could cut steel beams... You lied to me, you made me and the entire world dumber. Why??? Was it something you were told to do? Did you simply not know how to work with thermites for cutting metals? Explosives grade thermite (nano thermite compound that could not possibly occour naturally in the collision) was found at the WTC site btw. Molten bright glowing steel flowed from one of the corners of the building prior to collapse. Firefighters reported a series of controlled explosions (What NIST describes as "dust puffs"). I just want to know how much extra you got paid for playing a fool that episode?

@ddoherty5956

9 ай бұрын

You need a friend with a laser cutter 🤣👍🇬🇧 also might be fun to do a hydrogen flame polisher project for finishing acrylic edges? All the best.

@ET_AYY_LMAO

9 ай бұрын

Great offers!

@Chief351L

9 ай бұрын

Adam, I setup drying rods that are used in sealed weapon safes (to be YT friendly, pew-pews). These simply plug into any wall outlet and have been used for years to manage humidity and keep things from rusting. I live in Louisiana which is a geographical twin to Vietnam with Heat & 80%+ Humidity and the rods work great. They’re easily mountable and the diameter is typically 1/2-3/4 inch. That’s what I’ve been using in my custom built filament dry box for the last few years. Also they’re usually $15-$20 and last forever.

I love how Adam went from zero 3D Printing to Maximum 3D Printing in less than 30 seconds.

@BenlshTracker

9 ай бұрын

its so hilarious and so AMAZING HAHA

@cazmarius3442

9 ай бұрын

I can't wait to see the resin printing setup. The ventilation adds an extra challenge.

@catherinebhicks

9 ай бұрын

ADHD hyperfixation is real :)

@alexchulzhanov

9 ай бұрын

It tends to go like that… 3D printing is a very very deep rabbit hole lol

@glp.1337

9 ай бұрын

@@cazmarius3442 If he ever gets a resin printer I hope he takes safety a bit more seriously.

Big word of advice for your 3D printers, Put them on really solid sturdy surfaces, I can see your anycubic is wobbling a lot. That would show up as echos or ghosts as the whole structure is vibrating. Thicken up the legs, put in corner brackets and if its on wheels, swap it for wheels that can switch to feet.

@jamiemacdonald436

9 ай бұрын

Great advice. A very stable base makes a huge difference.

@PLr1c3r

9 ай бұрын

You do want a sturdy surface but you minimize ghosting and ringing with anti vibration feet not by solidifying the frame. That would increase the ghosting and ringing effect.

@smartinsilicon

9 ай бұрын

Input shaping will help reduce the impact of vibrations, but I also came to post this tip.

@Calamity_Jack

9 ай бұрын

That will help, but the floors in his workshop themselves are bouncy, so that will also be a factor.

@Wiseclone5555

9 ай бұрын

Putting a concrete paver under the printer would go a long way. It'd increase the inertia of the cart, and require a lot more force from the printer before it would start shaking.

Tip for those who want to cut Acrylic on your table saw. Go to your local big box hardware store and grab a 7.25" Vinyl siding blade for your saw. Now I know what you are thinking, "That is the wrong size blade for my saw". Yes, yes it is. The 7.25" blade will run slower, and the vinyl siding blade has low slope teeth on it that will not chip out the acrylic. Even on thinner pieces. Combine this with Step bit drill bits and you are an acrylic manipulating monster. Also, dish soap on the bits work wonders. If you don't have a step bit (GET ONE or MANY) you can sharpen an old drill bit to a point on the grinder. Use a slow speed when drilling with the dish soap as lube. Perfect cuts and holes every time! And Adam, why build the second box? I ran spool trollies (roller bases that the reels sit on) in my dry box (Which I built AFTER seeing yours) and have PTFE feeds running out through the Dry box up to my two printers. Works perfectly. My filament literally never leaves my dry box. Video will be up on my channel shortly.

@penfold7800

9 ай бұрын

When you say 'step bit' I think you mean what some engineers call a 'Pilot Bit' which has two cutting diameters, A small 1cm(ish) deep thinner starter tip and a thicker bit. Think of it like having two drill bits in one; A small starter bit and the actual size you want-to-drill bit all in one.

@Theexplorographer

9 ай бұрын

No, I mean step bit. Adam uses them all the time. Google it. @@penfold7800

@Theexplorographer

9 ай бұрын

Using a pilot bit, especially near the edge of a piece of plexi will almost guarantee you crack it. @@penfold7800

@jannikn1606

9 ай бұрын

@@penfold7800 Not the actual purpose of those bits even if they are often times used to start a hole (but not actually drill them completly since they only have cutting edges on the tip). They are for running live centers on the lathe for Starting a hole there are actually other bits (NC Bits).

I love watching Adam go through the exact steps and emotions as every other person who gets into 3d printing, myself included!

@StuSaville

9 ай бұрын

Excitement -> Confusion -> Frustration -> Anger -> Depression -> Acceptance

@BQAggie2006

9 ай бұрын

@@StuSaville "I don't have enough, I think I need one more"

@StuSaville

9 ай бұрын

@@BQAggie2006 -> Buyers Remorse

@martinpalmer6203

9 ай бұрын

yeah holy shit why didnt i get one of these earlier... can build so many things, now if only i could find space for a bigger one or more...and the new generation of hyper speedy ones.... yep its an addiction that wont kill you and makes cool stuff :)

@RyanAllen905

9 ай бұрын

How about that last moment when Adam stuck his head in to inspect the current print? Just watching the printer work, inspecting the extruded layers for quality, and just admiring the print in progress. Such a familiar experience.

19:45 seeing him marking that looks just like the mythbusters blueprints lol

Manually drawing the front door without a ruler is next level! Awesome job Adam! It looks great.

@gabrielemarabello1638

9 ай бұрын

Not only manually but also with the precision of a ruler... When he drew the last line it coincided perfectly with the first 😂

@tooby98765

9 ай бұрын

It's easy when you know the trick. Use your pinky as a guide to follow the edge of the material.

@shubinternet

9 ай бұрын

Adam has taught this trick in the past, but it still takes a good deal of experience to actually execute this trick as well as Adam does. He has many years of experience building props, including at ILM. On some of those jobs, he had to do this kind of thing many times a day during some of his builds, just to get the job done in the timeframe required.

I love how throughout the entire process of building the enclosure, something was being printed inside

Adam finally hits the 3D printing enlightenment for real, now he's hooked

@tested

9 ай бұрын

So much this.

@Blamm83

9 ай бұрын

Next step a Voron, for faster prototyping!

Consider bumping up the nozzle size to say .6mm or .8mm to save time. You could have thicker layers and still maintain quality on large prints. It does use more material, but can sometimes cut down times to a 3rd of total print times and not cut much quality. Try it out in slicer settings and see if its something worth looking into.

@dsp4392

9 ай бұрын

Depends what you're doing. You can expect a lot more oozing with 0.6mm+, which in turn will cause blobs, zits, stringing and under-extrusions. Might be OK if you're post-processing anyway, but IMHO the negligible speed increase is not worth the significant decrease in quality and reliability, especially when running a print farm.

@Drassk

9 ай бұрын

​@@dsp4392Putting down 4X the material (if you have the heat) is not negligible, and you can get clean results with proper setup just like with any nozzle. Don't blame the tool if you can't get good results.

@caddyguy5369

6 ай бұрын

Pretty sure you have to change out at least the heatbreak. Anycubic is proprietary. Any firmware updates have to be done through a phone app as well i believe. I have one, but haven't installed the app in a burner phone yet. Had I known this was the route anycubic was taking I would have bought something else.

You just made a drybox which can only hold a filament spool with the same large diameter hole in the middle. Different brands of filament differ widely.

@geak78

9 ай бұрын

I feel like he has a specific brand he buys a lot of that he knows.

@tiffanysandmeier4753

9 ай бұрын

​@geak78 I was thinking the same thing. He has boxes of all the same brand, I think, below the printer. For someone who buy whatever is on sale/is cheapest, the pipe might not work, but maybe a smaller one would, but it wouldn't be as strong to support the filament roll.

Fascinating to me that you can work on the case WHILE THE PRINTER IS PRINTING. I'd have been rather nervous about messing up the print. Thanx... and what fun to be adding more printing capability in the shop. WOW! 🌻

@Theexplorographer

9 ай бұрын

He could literally pause the print, take out the filament, put it in the new box and then continue on with that printer. I do it on my Creality 10s Pro V2 all the time. In fact, in some of my printing, it's required.

@DoctorNemmo

9 ай бұрын

Yup, you can pause printing and change filaments, for example if you want to use different colors in a print.

@JolynBowler

9 ай бұрын

@@DoctorNemmo 🌻

When cutting and drilling acrylic, the results are much better when using saw blades and drill bits that are designed for the purpose. When using general purpose blades and bits there's a bunch of cracking and tear out (and often melting). The different angles on these blades and bits makes all the difference in the world.

Makes me smile to see Artoo sitting in the background whilst Adam does his thing.

Oh man, the editing job keeps giving us such gems! The 3d printer dancing while Adam is not looking xD

I would actually like to see Adam build a VZ Bot 330 or a Voron 2 one day. I know he would enjoy the build :)

@kenhia

9 ай бұрын

Don't think a "one" day build for a Voron 2 (especially not if your first Voron build) is plausible. I'm closing in on 72 hours into my current Voron (V2.4) and it's my fifth Voron build (2x Trident and 2X V0). I do go slow and meticulous, but anything under about 20 hours isn't likely. That said, I would also LOVE to see Adam do a Voron.

Might be worth putting a mechanical fastener into the led strip above the printer. Last thing you want is the tape releasing midway through a multi day print cause the tape glue softened due to the heated enclosure.

@kantpredict

9 ай бұрын

​@shadowarachhthe glue holding the led to the channel, not the channel to the enclosure

42:40 ... Anyone with 3D printer knows that "blackout". You are doing stuff and just stop and stare at the running printer :D He truly is one of us! Love these videos

It's so awesome getting into a hobby at the same time as Adam, it's great to see him add these new capabilities into the workshop!

@joshwarrey3728

9 ай бұрын

I got into 3D printing because I teach creative technologies to 7th graders and it's part of the curriculum. What a time to be alive! I don't think any of my other co-teachers would have the same passion for this as me. I have always wanted to be like Adam Savage since I was a kid watching Mythbusters.

@faaarmer

9 ай бұрын

Me too! But I'm just on an Ender 3 and he's gone all out haha. Makes me want a Bambu Labs printer bad.

3d print aficionados... "avoid all vibration, don't even touch the table which it's printing, for God's sake". Adam Savage... "pass me my power tools, I'm screwing the shit out of this table, and I'm not waiting for the print to finish"! I love this channel, I hope Adam enjoys this new role as much as I appreciate the content. Best KZread host period.

I know how you feel Adam. I was like this when I first got a 3D printer into my electronics lab. It's been 6 years since, but it's essential for bridging the gap between components, projects and it's so beautifully practical too, whenever I need a part, or want to put things that doesn't otherwise fit together, a few minutes in Blender, then a Slicer - an voila - magic!

AHAHAHAHA its good to see Adam getting into 3D printing so much and so quickly, especially considering a few months ago he was still hesitant of it

@HLR4th

9 ай бұрын

Adam “getting into” anything soon becomes a Master Class! This oughta be fun and educational. I love how he’s already improving his mega-printer!

@doberski6855

9 ай бұрын

Correct me if I am wrong, but pretty easy to get into 3D printing in a big way and quickly when the printers and supplies are given to you by the companies. As a way to market their products it makes perfect sense. Put your machines in the hands of a craftsman with a 6 million plus audience to boost sales. Not knocking it, just saying.

@dnb9913

9 ай бұрын

@@doberski6855 im not saying anything about that, its just a general comment that its nice to see adam becoming a 3d printing geek like me and many other so quickly

@fergusontea

9 ай бұрын

I got a 3D printer in November 2022 and I'm obsessed with printing functional parts to solve problems and make repairs around my home and workshop. Love it!

@JKSSubstandard

9 ай бұрын

​@@doberski6855maybe. But nobody NEEDS an x1 carbon. For $100 bucks you can get an ender and a free license to fusion 360 and start making stuff

Love the calculating noises with the mental (edit: *mentat* - google auto-corrected) mode. Also - I liked that we got to follow you more as you walked around the shop - it was fun to see the sections dedicated to certain functions as well as all the collected props and goodies on display!

@dpsamu2000

9 ай бұрын

A better sound effect would have been the W.O.P.R.

@rootballer

9 ай бұрын

That's "mentat" mode. A reference to the human computers in the Dune universe.

@joshbymyself

9 ай бұрын

@@rootballer Finally! Someone got it! 😆

@JackHughesRichmond

9 ай бұрын

Ooof! Autocorrect got me! Apparently google doesn't like that word.@@rootballer

You should put some black/yellow warning bands on this thing. You’re going to run into it one day 😮. Nice enclosure btw! Love the way you build it!

I don't know why but the camera tipping over occasionally always cracks me up XD

Adam... you know what I love about you????.... your vibe... I can feel your energy and I drift off it.. your Purity...

I cant stop looking through your shop in the background. Its like an iSPY book. so many interesting things. Makes me want to save up to try and get a workspace. So many projects could happen at the same time. I love it.

Adam, look for ionic membrane dehumidifier cell for the dry boxes. It's a Japanese technology that dehumidifies using a membrane that thru hydrolisis separates O and H. These cells are sold in many different sizes and capacities. Most important things are: much safer (no heat) and efficient (1 to 5 watts). Greetings from Brazil!

Thank you editor and Adam for your humour 2:50 Adam.exe 8:10-8;32 Thinking about Dinner 13:50-14;08 I Will Build My Own 29:12-29;30 very heavy

Adam you can get high static pressure axial fans from Noctua that come in a variety of sizes, if you ran two 1.5" hoses you could probably pump enough dry air in and out to make it work. They're very efficient and quiet with 150,000 hr MTTF reliability.

I very much appreciate that 'mentat mode' label. The little bits of humor included in your videos bring each project their own vibe of creativity and accomplishment.

Thank you for all you do. I read your book "Every tool is a hammer" and it resonated with me. I have more fun watching you make stuff and work in your cave. I am a maker, not anywhere near your talent or experience level, but your phrase "Serial Skill Collector" defines who I am. Thank you for sharing your talent and experience.

To those with smaller shops: You can also buy bigger sheets and use a plastic cutting knife to knock out panels small enough to clean up on your table saw! Theres always options for those of us cursed to work in basements, they just take a bit more work lol

I've just started 3D printing as well with a small Kingroon KP3s, and immediately dove down the vortex of "how can I make this thing even better?". So far I'm on a Volcano hotend, printed modifications for a 12cm fan in the PSU, installed a mosfet board for the heated bed, Have a BTT Pi V1.2 so I can run Klipper over the network, and now I'm drawing up an enclosure for it with activated carbon sheets lining the walls to absorb noise/smells and improve print quality. It's awesome to see people like Adam who are as giddy and excited about stuff like this!

That last part was riveting!

i cant express this enough. change the kobra max to direct drive. get rid of the boden setup. its a printed bracket, and a stepper motor. it will drastically increase the print quality of the printer. best thing i ever did to mine

Be mindful you'll have to either vent it or tweak your print heat settings otherwise it might run a but hot :) My advice would be put a HEPA filter exhaust on it :)

Genuinely love how even though he could afford industrial 3D printers worth thousands and thousands of dollars, he is more interested in using and sharing his experience with the hobby printers that more people can relate to.

@KZ-yy9pm

9 ай бұрын

No industrial printer was used in this video and the anycubic only costs 550 dollars

@theninjacowboy

9 ай бұрын

That's my point.@@KZ-yy9pm

@the_arcanum

9 ай бұрын

Come on, get real. Anycubic sent this (and he'd be a fool not to take advantage of it).

Love the enclosure build! If you experience "Heat Creep" and it causes your filliment to clog in the extruder, you may want to add vents to the top for heat to escape. The LEDs will produce heat too.

This was a great binge. Thanks for the content on 3d printing.

Two of my favorite pastimes are watching Adam's videos and watching 3D printing videos. Now I've got WORLDS COLLIDING!!....and it's glorious.

FYI - If you take a propane torch and heat up the cut edges (after sanding) they will go clear and disappear even more.

Dude. I just started running my Kobra Max last night. I can't stop. YOU ARE AN INSPIRATION. YOU ARE THE COOLEST GUY IN THE WORLD. Just my humble opinion.

@DadBodMedicNate

8 ай бұрын

Also, my son (11) and I watch ALL of your videos and most of the Myth Busters shows. He too is a big nerd and I love it!

Adam, if you are using PLA, then I wouldn't worry about dry boxes. I have PLA filament that has been sitting out in the open for 4 years and is still good. The ends get a little brittle but you just break that off until you get down to the good stuff. It's the other filaments like PETG, TPU, ABS and some of the more exotic filaments that you need to keep dry. But really happy to see you so excited about a hobby that I have been into for many years!

13:50 So I actually did a similar thing for my big FDM printer. I made an enclosure that's not quite airtight, but fairly air resistant. It will serve mainly as a protector from dust and random disturbances. But I used signmaking coroplast sheets, and framing of 3/4-in square dowel. Added a couple hinges and a magnet to snap it shut, and it was in business. Not as pretty and you can't see through it, but does a certain job well, I think

If you're willing to commit to keeping the Anycubic printer to the right of the Bambu printers, you could just mount the acrylic filament storage box you built in the top right part of the dehumidified chamber, feeding through the right wall.

@rmeden1

9 ай бұрын

I was going to suggest the same thing. Why have the fancy dehumidifier box and not use it?? Of course if you're mostly printing PLA it doesn't really matter.... and if you're going to do ABS, you need ventilation.

@AdamMclardy

7 ай бұрын

And he did

@rmeden1

7 ай бұрын

@@AdamMclardy no, he mounted a box on the side, giving it a weird shape. I would have kept it in there main box.

@jakesells2379

7 ай бұрын

@AdamMclardy not quite, he mounted a new box on the side of the dehumidified cabinet, with a small fan cycling the air. It's probably the next best thing, but just mounting the spool inside the cabinet would have been easier and cleaner.

I just love how he is making a case to stop the airflow moving the printer whilst its printing and yet he is literally building it while he is printing his hat on the machine, wobbling everywhere lol. Adam we love you

Perhaps THE most impressive element of ALL of Adam's builds is that he can effortlessly squat, kneel, and raise up from a squat without USING HIS FREAKING HANDS. I mean who ACTUALLY kneels on a hard surface?! Incredible. I'm too old for that shit. Also - the art is good too. :) Shine on, Adam!

I love the R2-D2 reflection off the X1C door at the end...

This is the best yt channel ever. Love you Adam. Since the old days. You are great and ofcourse the other ones too

I got this printer a month ago. And just set up yesterday. I gotta say. Light years ahead of the Chiron I had. So much easier to setup. My first print was flawless.

Adam, seeing you mentally build the dry box and adding the dimensions blows me away. That is something I simply cannot do. I need to draw everything out to truly get it in my mind's eye.

just small note, make the filament spool supported by bearings, it will improve your print quality quiet a bit, specially when using large heavy spools - like 3 kg.

The R2 reflection during the unboxing was a nice touch!

Connect your two dry boxes with a piece of tubing, humidity will balance between them easily.

i love that he's found his way into 3D printing. ^_^

Man , Adam I love to watch you work on these small projects . It’s so satisfying to watch because I’ve started doing these kind of things myself as well for my major at school . Keep it up man , big love 🫶

Rivets in acrylic tend to crack after time. Use a washer on the backside for the rivet to expand against sandwiching the sheet in between the head and washer. Much less stress on the sheet=less cracking.

I just ordered an Anycubic Kobra 2 Max. It arrives in two days. I'm very excited about it.

At 42:20 Didja notice the reflection?? FANTASTIC! Couldn't have planned that better! :D

Super stoked you're getting into 3d printing, Adam! Can't wait to see what cool builds you have ahead!

21:44 tip when u make that cut add the hinges then do all the setup and then make the next 3 cuts.

Printing is an excellent way to get stuff done!

On my Ender 3 I upgraded the spool holder to one with a ball bearing. I feel it makes a difference as I had to re-calibrate the E steps once I did the upgrade. Considering how long the bowden tube is on your dry box, you probably should do the same.

@aaronross6086

9 ай бұрын

Do you know where you got the stl.for it? Been looking for one like that

Nice. I built a similar size enclosure for a cleanroom at work. I use 20x20mm Al extrusion as a frame. And then slotted the polycarbonate sheet into the extrusion notches, so no gluing required .

I think the thing I like the most about these videos is to watch all the different tools in use but more importantly the logical process through which these designs come to fruition. It's well thought out but as it comes together new challenges need to be addressed. Just fascinating.

I had had a Kobra Max for a while now, and it has been a great printer. I had a screen issue at first, but the support from the company was good and shipped me another screen, took about a week. I just used the printer USB'd to the PC in the meantime. Have been quite happy with it, a nice upgrade from my smaller machines.

Love adam savage grew up watching him and so glad hes on KZread

Loved Mythbusters so much growing up and now getting a second chance watch Adam build stuff. The 3D printing scene is amazing, it's never done! This is going to help you so much to make your idea's reality fairly easy! Thanks for the making content again!

I really appreciate you guys over at Tested. The fact that Adam is willing to design, build, and even show his mistakes to the world without any hesitation is what inspires me to make and build myself. Thanks for the years of content!

The mechanical calculator scene had me in stitches. Made my morning! Thanks for that. I have 4 printers. I have 3 in 1 room and 1 is a brick in the garage for parts. I thought about an enclosure and I have the tent for my CR10 bookmarked but I haven't bought it. Oh, and the tent has clear panels so you can look through it. The biggest reasons for an enclosure is to retain heat and to prevent wind from suddenly cooling the part or bed and popping it off. Been there, done that too many times! The plastic is a bit overmuch. Cool though!

Thanks for making this one episode. and a lovely one at that... now, dinner time!

Not sure if its been mentioned enough but the inclusion of a backup battery. Some UPC to avoid/reduce of potential electrical caused print failures can not be stressed enough. Doing a 20 hour print and it fails when over half way done due to power outage can be frustrating not to mention wasted time/materials.

14:49 the face Adam made in that pause… am I the only one that half expected him saying in a low voice “yet”?

If you're making an enclosure, I highly recommend against Polycarbonate! Especially if you plan on heating it. If you're dead set on acrylic, go THICK 1/8 is too thin. The heated bed will probably be enough to heat the acrylic to the glass transition temperature. It's only 90°C so it's going to get wobbly around 60-70°C I tried using 1/8" acrylic for my first heated chamber and had to rebuild it almost entirely out of wood.

I just ordered my first 3D printer and its the Anycubic Kobra Max ... 2 days ago ... can't wait :D

@simbian5900

19 күн бұрын

How do you like it after 4 months? Im looking to get one too

@Whispers147

18 күн бұрын

@@simbian5900 love it!

I love infrastructure enough that you saying it snapped my attention back to this video I had playing on the side

LOVE my anycubic. The kobra NEO is an excellent starter printer for anyone wanting to try the business!

One of my favorite parts of watching these videos is Adam already finishing his initial plans then going "wait, why can't I do this too?!" because I do the exact same thing when I do any project.

I hope you get tons of fun out of printing, Adam! I'm a 3D modeler and man, getting a 3D printer when you're already decent at 3D is like getting super powers.

Very nice! Always a pleasure to watch Adam being creative 👍

I really enjoy those Bambu Labs printers. Thinking about a P1P to replace (or at least takeover general duties for) my modded Ender 3v2.

I'm glad you got into 3d printing. It is an amazing hobby and tool. I now have 3 printers and want more. I can't wait to see more content about 3d printing.

Now I definitely have to build one for my elegoo neptune 3 max, love the build again! tx Adam

I’m so happy we can still watch Adam work.. it’s honestly so great! He’s such an incredible engineer/everything and makes me remember my childhood watching mythbusters. Thanks Adam for still being you and showing us your work! ❤

That printer has got some serious wobble on that small table, time to build a sturdier one Mr Savage!

Bambu labs are great printers but i love my voron 2.4 350mm its got a large print volume, enclosure and speed.

Reminds me of a custom incubator I built for organ-on-a-chip experiments. Fortunately the university had a great laser cutter to cut the quarter inch acrylic. Getting the pair of Arduinos megas to synchronize the heating and gas injection was much harder, lol.

"I reject your price range and substitute with my own!" Adam, i can't believe you forgot to say "Aziz light" 😂

I still have an HP LaserJet printer, that’s maybe 15 years old by now. It never clogs, it doesn’t waste ink for cleaning, and it still works.

Oh, I really, really wanted that 3rd middle rivet...!! ...and you did it. So satisfying... :)

I am loving these 3D printing videos from you!

Working on getting my money together to get my first x1. Been selling a bunch of old drum gear and whatnot to try to fund it and a couple ams units to expand my home business. Can’t wait til I can get it!

Looking forward to the video of you adding temp control + exhaust fan on the new box.

yuuuusss TAP is my go-to. Just wanted to sing their praises. I also wanna say I enjoy the MacGuffins placed in frame; Sometimes past builds and sometimes teases of future build videos. 25:13

Damn! That Wonder Woman enclosure is amazing!! ...but that R2 still keeps grabbing my eye every time it's in frame. I'm sure there are build videos for it somewhere. Must go find.

You want big fast prints? Check out the Voron v2.4 (its a DIY 3D printer, but they print fast, clean, and have very large beds as well). And there is a downside to enclosing the anycubic (let alone any printers really) is cooling of your filament. If you're printing PLA in there, it shouldnt be sealed/enclosed, or the filament will not cool sufficiently. (Honestly, it'll probably be fine though) But anyway, check out the Voron v2.4 - would be fun to watch you build one.

I finally upgraded to the same printer and It has revolutionized my prototyping and building process. I now 3D print half the things I used to buy from the hardware store.

I always enjoy 3d printing parts for my 3d printer...

Nice printer, have you ever thought of getting a Palette 3 Pro. You could have a almost endless filament (with 8 spool making 1 filament) - no more swaping spool - no more waste of small peace of pla since there are chain/combine together, its fun when you create a Huge Piece, no worry for your spool the end before the print end...