I am subscribed. Great video!

This was a great video. I saw Sam's video last week and yours today. Your epoxy coated coils look so much safer. Not that I would ever mount my amp to the enclosure but there are plenty of people still doing it.

Jason always dropping the good stuff

It’s gonna be a monster at 2 and 1 ohm certified And uncertified. Dynamic will be over the top!! Whoop whoop!

Hey man I really like your videos. I have based most of my builds from what you have tested. Keep making more videos. And I just subscribed. Cant wait to see what you do next.

Love the dynamic power at .8 ohms. That's what I would run. .5 ohms is awesome

Best amp Taramps made so far 💪🏾

@Facekicker

Жыл бұрын

Agreed!!

Love your videos bro! Thanks for everything

Nice I bet next Taramps will make a Smart 8k bass and that will be a very powerful amp now this amp is also powerful.

Sam w/barevids was saying the mosfets in the reg smart 5 could handle higher voltage I'll bet like the smart 3 it will do more than 5k at 1ohm. Regardless, excellent dyno thanks for the content Jason

Didn't know Garfield was doing amp dynos. In all seriousness, good vid.

Awesome just got 1 can't wait to run it

@Facekicker

Жыл бұрын

You'll be very pleased with it Just make sure you have the proper electrical support!

@heavy12inchsub79

Жыл бұрын

​@@Facekicker loving it! You should try .25 ohm. I'm thinking about it

Great battery bank!

Thank you

im subbed and im buying that amp and going to run it at .5 on 2 american bass hawks in a 6th order

Dope. Sam from barevids just did a video on this amp and now an amp dyno🔥

@sabarlow80

2 жыл бұрын

Sam

@angelvip2474

2 жыл бұрын

😂😂😂damn swipe auto correct keyboard strikes again

I'm glad you include current. Half the people in car audio only run about half the power needed for their amps and claim they make full power on their subs/amp

@Facekicker

Жыл бұрын

Electrical support is such a critical part of a build that is often missed or overlooked. Thanks for the support!

@LottoDub720

Жыл бұрын

@@Facekicker yeah a lot of people look at ah instead of bms with batteries and then their expensive alts end up putting in most of the work. Which I think people should have higher output current batteries but I understand that gets expensive for daily knockers

Thinking about getting the smart 8 bass

Long time watcher of this channel just realized I wasn't subscribed I am now lol 🤣

@Facekicker

2 жыл бұрын

Thank you!

@basshead402lincoln

2 жыл бұрын

@@Facekicker no prob man love to support fellow car audio creators I'm still trying to grow my channel as well wish all the best for your channel

i have this amp ! has good power,, speaker terminals take 8 gauge,, likes the lows. i chose this over the regular smart because its .5 could wire to .25 and rise...and has a lowpass

@michaelzaporozhets3219

2 жыл бұрын

You wire it 0.25?

@215sinakia7

2 жыл бұрын

@@michaelzaporozhets3219 with rise you’d be fine especially with rated at .5 to begin with

@superior3384

Жыл бұрын

How does this amp do for dependability? Long long term

@cali8221

Жыл бұрын

So the only difference is it has a low pass??Im trying figure out which one to get the smart 5k or the smart 5k bass??plz sum one help me .Thanks

@normanmcduffie2495

Жыл бұрын

how did the .25 work out???

Do you plan on dynoing any of the incriminator audio amps? I'm curious if what ive heard about them is true or not. The splitforce tech sounds interesting aswell. They say the ia40.1 does 8k in comp while being rated for 4800.

I subscribed!! I just bought a smark 3k Bass and was thinking if wiring my 3 CT Sounds Strato 8D4 to 2.67 ohms but I think you are talking me into wiring it 0.5 due to impedance rises a d the smart amp, I should never realy have a problem

So this amp is only getting around 7500 watts dynamically but the regular smart 5 gets around 12k? What the hell??? Great video btw!! Much needed information on these amps!! Edit: Thicker board?? I heard the bass version has a thinner board for some weird reason.

@Facekicker

Жыл бұрын

Bass version has some changes that make it a bit more reliable and consistent at low impedance, as well as using the Bass input section/crossovers. Dynamic testing seems to be impacted most by the design of the power supply section which would explain the difference. I would note however, that when an amp has a significantly higher dynamic score than cert/uncert testing, it would be rare to actually see those numbers real world. Cert/Uncert paint most of the picture.

@robertthabassheadjacobson4968

Жыл бұрын

@@Facekicker thanks!

Ima be wired to .5 on two custom dd 9510 sc with the ti frame and big roll surround. Duel spaced spider. Im bring the gain down and dsp so i get flat power across .5-4ohm.

Great test, wish you could test the original smart 5k as it might surprise you

@robertthabassheadjacobson4968

Жыл бұрын

Williston audio labs did a test on it. Look it up if u haven't already.

@cali8221

Жыл бұрын

Yes and I'm mad I bought this one as every one said the 5k bass was better but after looking at this video and BIG D video it looks like the smart 5 can do alot more RMS then the 5k bass man ..and the 5k bass cost 65 dollars more

It’s weird with the back plate off it looks like a 1.5k amp , but 10 k dynamic wow I don’t know what to say great engineering

@Facekicker

2 жыл бұрын

That's full bridge for ya

how to stop the throttleing on the smart 5/8... like what input votage, charging voltage, ac voltage, amp draw should you see to prevent it from the throttle

That amp is imo the baddest amp on earth

Thank you for being honest about the TRUE ability of amps on this dyno machine. WAY TOO MANY people believe that the numbers they see on these things is the power they'll ACTUALLY get when that is far from the truth. Would be nice to see real world power output in real time BUT that would hurt sales bc people don't want to see the truth. Either way, good video.

@dead6last

Жыл бұрын

i have a smart 5 bass and a smd amm1 it does rated power in vehicle

@cali8221

Жыл бұрын

@dead6last I have it too and mine does over ..its power hunger u gotta have good electrical 14.4v period

@dead6last

Жыл бұрын

I have a 370 alt and 80 ah yinlong

@eriqhayter8171

11 ай бұрын

By the statement make yourself sound like you don't know what you talking about

I wanna know how did the smart 5k get almost 12k when the smart 5k bass didn't

Yoo nice vid!!! Wat kind of reducers are u using

@Facekicker

2 жыл бұрын

Ill Customz. Thanks for watching!

I would like to know after each test did you charge the batteries or when did you charge the batteries

@Facekicker

2 жыл бұрын

This video and 99% of my videos I charge it up to 15v before I do anything, and leave chargers off during the runs. If I happen to leave chargers on I mention it and also notate it in description.

Thanks for the dyno. I was debating on getting the Smart 5 but ended up getting two Smart 3 Basses new for (320CAD) each. I plan to use them to run two DC XLs with D1.4 coils... 0.7 nominal each. Wondering your opinion on whether you go with a single Smart 5 or dual Smart 3s for this application. The price was tempting for the two but yet I'm second-guessing myself now.

@Facekicker

2 жыл бұрын

The 2x Smart3k will clamp more total power.

@miguelangelaviles4886

2 жыл бұрын

@@Facekicker what do you recommend to power my 2 vxf 15s d4s, 2 smart 3s l, one md8k or one smart 5? Trying to fight impedance rise as much possible

@Facekicker

2 жыл бұрын

@@miguelangelaviles4886 Smart5 at 1 ohm will bring the most power

@miguelangelaviles4886

2 жыл бұрын

@@Facekicker why not the 8k tho since its a more powerful amp?

@miguelangelaviles4886

2 жыл бұрын

@@Facekicker thanks in advance

I’m thinking about replacing a Crescendo Bass Clef 4K with one of these.

@pablohernandez8427

2 жыл бұрын

I went from wanting a bass clef 8k half ohm and switched it up to the md12k half ohm and fraction of the price still of the 8k

@Mr.NpK143

2 жыл бұрын

You'll be back to crescendo in less than 2 yrs

How bout a pdx precision power 10 k old sckool

So can I run a 00 to a distributor box to two out to power this amp

@chefbros11

4 ай бұрын

I have 1 00 and 1 4 gauge power line can I use these to or is the power drain dangerous

Great stuff bro. Appreciate these vids. Running two D2 RE Audio Triple X 15s (Model right after the Xbl^2). Using DSP for processing. Wondering what in your opinion would be the best option between a Smart 3 per sub, a Smart 3 Bass per sub or a Smart 5 Bass for both subs? From what I understand, the regular Smart 3 would give more power over the Bass version and two Smart 3s will have more power than the Smart 5 Bass. Guessing the Smart 5 Bass would be the better bet between the regular & bass because it can do 0.5 & rise from there up to between 1 & 2 where I would get good power & efficiency. Any advice on these amps would be great as I will be trying them for the first time. Thanks!

@Facekicker

Жыл бұрын

If it was my build, I'd be happy running the regular Smart5k, and you could wire the regular model to half ohm and be just fine.

@image91

Жыл бұрын

@@Facekicker Not that brave to be honest. lol. Would probably rise to over 1 Ohm either way I guess. Any particular reason you'd choose the regular 5k over the 5k Bass though?

@Facekicker

Жыл бұрын

@@image91 if you're using a DSP the bass crossover isn't necessary, and the regular Smart amp will simply put out a bit more power at 0.5 than the Bass model and at a slightly lower cost. If you were not running DSP then I'd suggest the Bass model purely because of the crossovers.

@image91

Жыл бұрын

@@Facekicker Will definitely be running a DSP. Don't trust the on board processing on most full-bridge amps to be honest. Was considering the regular Smart 5k but to be extra safe I might still go with the Bass version.

@image91

Жыл бұрын

@@LoudStereoTINYDICK Hm. Can any other factors be causing it to get that hot? Ended up getting two Smart 3k bass. Waiting to install them

About 5900 or 6000 on the dot

Got a question. I just got 2 skar vxf 15's dual 2 ohms. Debating on getting 2 smart 3 bass being wired down to 1 ohm each or should i get a smart 5 bass and wire the subs down to .5

@Facekicker

2 жыл бұрын

If it were me, I'd run the Smart5 Bass.

@Jdm_ryannn

2 жыл бұрын

@@Facekicker okay cool thanks man! I should be fine wiring it down to .5 right?

@Facekicker

2 жыл бұрын

@@Jdm_ryannn absolutely. And you are very welcome!

@mattfoster1077

2 жыл бұрын

I have d1 subs what would be better option for me smart 5K or smart 5 bass?

@cali8221

Жыл бұрын

I went with 2 skar vxf 15s Dual4 ohm to wire down to 1ohm on a taramps smart 5kbass

What gain settings were used

@Facekicker

2 жыл бұрын

Set to max clean and 8db overlap with DD1+

I have a question is this smart bass better then the regular smart 5?

@cali8221

Жыл бұрын

Right same question I've been asking

So I just got mine in mail yesterday. So this will support dual 1/0 inputs? Cuz my smart 3 did not. I'm just wondering if I should order some or not?

@1ohmwrecker

2 жыл бұрын

Sorry, you answered that at the end lol.

@Facekicker

2 жыл бұрын

@@1ohmwrecker it does, but after all the testing we figured the factory 2x 2/0 inputs are sufficient, it was overkill to add dual inputs.

@1ohmwrecker

2 жыл бұрын

@@Facekicker I kinda figured that, but dual inputs are sexy so I'm still gonna do it🤣 deff can't hurt I guess.

at almost dead nuts exactly at 13 mins in, what is that electrical "Snap/Pop" noise we hear? Also, glad u did the .5. when i heard "going to do 4,2 and 1...im like? ok if ur going to skip one, why do 4 ohms? lol who buys a sub/amp set up and wires it for a load of 4 ohms, on a single channel amp lol

@Facekicker

2 жыл бұрын

Bug zapper 😂 And because people often rise into 4 ohms or higher

@Preppy_unicorn9.0

2 жыл бұрын

@@Facekicker u know what i actually never thought about that, box rise. and DAMN whats that a 220 bug zapper? lol it actually scared me first time i heard it lol

Apocalypse 4.499,,, running half ohms,,,???

Smart 5 bass or the bass 8K? Which is louder? Which is louder with the lowww bass?

@got2getit204

4 ай бұрын

Did you decide yet?

I got 2x vxf 15s going to wire at 1 ohm, I’m stuck between smart 5k or bass 5k, what would you recommend

@1ohmwrecker

2 жыл бұрын

I personally have the bass version, but the regular version has a bit more power. But I love it. I have videos on KZread of it playing, floating some paper towel, ya know...

@colemclane650

2 жыл бұрын

@@1ohmwrecker hell yeah how you like them xv3s?

@1ohmwrecker

2 жыл бұрын

@@colemclane650 I like em. My box is deff too small, and they're like 75lbs each so crazy heavy! I gotta take my box out w a crane just to not kill my back lol. So they're cool, just insane heavy.

@cali8221

Жыл бұрын

@Scott Wright🔊 bro I've watched several videos and the 5k doesn't do more then the bass version..can u explain??

If you don't need .5 get the smart 5. Rated at 12.6

Hey, um i want to get one of those amp dyno's. Where did you get it and how much was it, if ya dont mind me askin? Thanks!😄👍☮

@Facekicker

2 жыл бұрын

From Tony D'Amore. They aren't regularly built, aren't cheap, and requires a healthy power supply and battery reserve as well.

@MW-sw7so

2 жыл бұрын

@@Facekicker ahh, ok. If i need one ill let you know, thanks!😄👍☮

Beside money which is better the smart 3k or the smart 3k bass need it for a x12 v3

@Facekicker

2 жыл бұрын

Most users will be best off with Bass Smart3k due to it having crossovers more appropriate for subwoofer use.

@cali8221

Жыл бұрын

@Facekicker so why the 3k bass but when sum one asked u about the 5k u said the regular 5k over the 5k bass..I wanna know which is better of the 2??smart 5k or 5k bass..

So if i have problems with this amp hows the warranty ? Seems so be mostly good with customers but im unlucky 😂😂

@Facekicker

11 ай бұрын

Taramps support is top notch my dude

Heeey what was the power setup for this run

@Facekicker

Жыл бұрын

Just ran on a CMAX with no charging

Is this good for 2subs running at total 4000rms(2000rms each) or will the new smart bass 8k benefit me more since there is more headroom for peak gains ? Subs are two: Ds18 Exl XX12 2000rms (4000 peak)

@Facekicker

Жыл бұрын

Personally I'd stick with the 5k model.

@EazyBuildz

Жыл бұрын

They are 2ohm DVC Would you run them at 2ohm or .5 ohm ?

@Facekicker

Жыл бұрын

@@EazyBuildz half ohm and gained clean

@EazyBuildz

Жыл бұрын

Thanks for your support Would the smart 8k bass be too much for them or it's just personal preference ?

@Facekicker

Жыл бұрын

@@EazyBuildz More battery needed, subs won't take any more power than the 5k imo

I jus would like to know which is better of the 2.The smart 5k or the smart 5k bass??

@Facekicker

Жыл бұрын

Generally speaking, the Bass model is better for the crossovers.. If running a DSP or HU with adjustable xover settings, there are cases the regular Smart5k will make a tad more power.

@cali8221

Жыл бұрын

@Facekicker ok thanks..yea I jus went ahead and got got the bass version figured it cost more and said bass at the end for a reason..maybe I was wrong lol..But too late now..either way its still a decent amp for the price compared to like the salt amps and jp amps

Just drives me a little crazy because I like taramps but I actually accept what they can do vs some other people that act like its a true full-blown true Brazilian amp when taramps don't even do that.. if you wanna talk about Sound quality and control and it's a true full Bridge amp go with powerus or prv

@Facekicker

2 жыл бұрын

The Smart series are Brazilian full bridge and this model was designed by Taramps from the ground up. Not sure what you are trying to suggest.

Wonder if this will do ok wired at .35 I have .7 coils

@Facekicker

2 жыл бұрын

Burps should be ok. Music at some frequencies might get attenuated.

@Facekicker

2 жыл бұрын

You'd also want to know rise at peak frequency, you would want to rise between 1.5 and 2 ohms to see the most power.

Im curious how you set the gain on this. do you set it as if it were a .5ohm load or a 2 ohm load?

@Facekicker

Жыл бұрын

Ohm load doesn't matter, it's set unloaded to max clean, same as you would do in a vehicle.

@cali8221

Жыл бұрын

Yea cuz BIG D did this amp and his results are different then your's..I have the amp and on 1 ohm I'm pulling more then what u said at 14.4v

@Facekicker

Жыл бұрын

@@cali8221 his bench and your car are different than my bench, so differences in performance are unavoidable.

@SbassLaser

Жыл бұрын

@@Facekicker i guess this is my confusion; if you have a 2 ohm load, then the amp would need to put out 100 volts to the subs to make 5000 watts of power. But if the amp puts that same 100 volts into a .5 ohm load, you would be getting 20,000 watts, obviously that's completely unreasonable. A .5 ohm load only needs 50 volts to get 5000 watts. So if I set the gain and it doesn't reach clipping until ~100 volts then how is it safe to run a .5 ohm load with that gain setting? Does the amp detect the lower ohm load and reduce the output accordingly?

@cali8221

Жыл бұрын

​@@Facekicker ok..was jus trying get an idea..I went ahead and jus bought the 5k bass and 2 skar vxf 15s D4 and had a box made 6.5 cubes tuned to 30hz

And maybe see if the Amps do more power @ 15.8v on smart 5k

@Facekicker

2 жыл бұрын

Smart amps won't do much more above 14.4v

@josephhammond2557

2 жыл бұрын

@@Facekicker they state they do up to 16v on their specs

@Facekicker

2 жыл бұрын

@@josephhammond2557 they operate up to 16v, but output won't really increase above 14.4v.

@josephhammond2557

Жыл бұрын

I've been running a smart 5k at 15.1v for a while and haven't had any problems

Is it 🤔 possible to wire to .01 ohms ?

@Facekicker

2 жыл бұрын

No, that's essentially a dead short

Which would you take a spl amp smart 5k or smart bass 5k?

@Facekicker

2 жыл бұрын

Depends on application. If it was a situation I needed to wire to .5 I'd run the Bass model, otherwise if wiring to 1 ohm I would use the regular Smart 5k.

@jimmyjam5588

2 жыл бұрын

@@Facekicker that's what I was thinking but I wanted to make sure a smart 5000 it is. Thank you for all of the good video always enjoy watching them!!!

@Facekicker

2 жыл бұрын

Thanks for watching!

@cali8221

Жыл бұрын

​@@Facekicker and why is that?the bass version says bass for a reason and cost more for a reason

@Facekicker

Жыл бұрын

@@cali8221 There are situations the regular Smart5k will make a bit more power.

Can you do a taramps bass 20k please

@darksidegarage910

2 жыл бұрын

he did a few bigger ones. look at the first few videos he did

@Facekicker

2 жыл бұрын

They're discontinued unfortunately, 30k is the next biggest amp available above 15k.

@xBLACKxOPSxSECRETSx2

2 жыл бұрын

Could you do a bass 8k and show what voltage drop to around 13.5 does?

I have 6 rockford fosgate p3 12s in my tahoe and my electrical is upgraded. HOW WILL THIS AMP BE FOR MY SUBS?????

@Facekicker

2 жыл бұрын

It would be a little stout imo, but it would work providing you can wire to 1 ohm. What impedance are your subs?

@reckingball6242

2 жыл бұрын

@@Facekicker I don't know but they are wired at 1.33

@Facekicker

2 жыл бұрын

@@reckingball6242 that's probably just right then, you'd see just over 600w each with rise.

Whats the db/oct slope on this amp friend

I have a Smart bass3k I'm trying to decide to go to a Smart bass5k or go to a Smart 5k. The question I have will the crossover sound different on the smart 5k

@Facekicker

2 жыл бұрын

Bass series if you're not running a DSP or HU with adjustable subwoofer LPF

@d.j.theman7581

2 жыл бұрын

@@Facekicker thank you

Not very often you see amps that actually do old school MAX power claims haha

Do these handle low bass very well?

@Facekicker

2 жыл бұрын

Plays down to 10hz

@lscott4402

2 жыл бұрын

@@Facekicker thanks 👍

What's the starting price on the smart 5 bass?

@Facekicker

2 жыл бұрын

$639 is MAP, we are able to offer a small discount if you contact us.

@cali8221

Жыл бұрын

​@@Facekicker right over priced..the smart 5k is at about 500 and does more RMS

I'm yet to find a bass 8k Dyno 😭 i want to see what it does compared to this smart 5k bass to wire at half ohm

@Facekicker

2 жыл бұрын

If I have one in stock I'll get it done

@GorillaKnobzUSA

2 жыл бұрын

@@Facekicker i appreciate it nobody has a Dyno on these if you do get to. Also Dyno at .5 ohms since it's half ohm stable as well

@mattfoster1077

2 жыл бұрын

That’s what I am waiting for

@mattfoster1077

2 жыл бұрын

Is the smart 5ks better amps

@GorillaKnobzUSA

2 жыл бұрын

@@mattfoster1077 I heard they come out defective.

Manufacturer ratings are 5k at 0.5ohm ~2ohms but dyno tests are 4,5k at 0.5ohm ~2ohms. This means that manufacturers lie?

What's up with no bass knob on these? That's a deal breaker.

@Facekicker

2 жыл бұрын

A knob that can be had for $10 is a deal breaker? Get an Axxess RCA bass knob and call it good. Many amps, especially some of the higher end Koreans, come without and assuming you will use an RCA knob which is better.

@joshhaimes

2 жыл бұрын

@@Facekicker I use my stock HU, so I send signal back to my amps through speaker level. If I wanted to use an RCA solution for the sub amp, I'd have to run RCA from the trunk back up to my dash, then back to the amp in the trunk again. Kind of a PITA and a lot of extra wire. They should just put a gain knob on the monitor unit that comes with the amp.

@Facekicker

2 жыл бұрын

@@joshhaimes in your situation you're right, it would be easier if it came with one. And yeah, that would be the way around it, running RCAs both directions - we've done similar in our install shop. Taramps is always innovating though so we may see them include bass knobs in the future.

@GentryMorrisIII

2 жыл бұрын

@@joshhaimes tap into speaker levels at the headunit and mount line out converter behind the dash or under your seat. Easy

@loaked3000

2 жыл бұрын

The audio control line out converters either come with or you can buy a bass knob for them. Also check out the Wavtech linkDQ, line converter with bass knob and adds a parametric bass EQ. Ive used this one with great results, I like it better than the audio control ones personally.

So I could possibly run this @ .25 and be fine? Hmmmmm

@Facekicker

2 жыл бұрын

You'll possibly see intermittent protect or attenuation

@SaltwaterBoogeyman

2 жыл бұрын

@@Facekicker thanks for your reply and info

Just look up powerus 8k vs taramps 8k and they gonna take the back plate off and you gonna be like ooh dang taramps missing a lot of parts 😆 no wonder why only $400 for a 8k

@atlfreakdaddy

2 жыл бұрын

Yeap, plus you can get 2 MD 8000.1 for the price

@luke_784lowfrequency8

2 жыл бұрын

Powerus is boss

@djkeys415s

2 жыл бұрын

Guys it don't take Alot that's why Taramps amps can make so much power for less

@drvictoria07

2 жыл бұрын

@@luke_784lowfrequency8 hell yeah.

@cali8221

Жыл бұрын

400 for a 8k??NO ..A smart 5k bass is over 500..

This is a lot less than the normal smart 5 something is definitely wrong here.

@Facekicker

2 жыл бұрын

It's a different amp, it has different benefits

@cali8221

Жыл бұрын

Right

I have seen .5 rise to 1ohm or a little more but not to 2 ohms. But the power your talking about won't happen on a taramps because they can't handle that huge current (Full-Time). I know your dynamic results where gonna be good because of the type of music they listen to in Brazil is real thumpish meaning this is why taramps (don't like) playing lows, I didn't say they won't I said they don't like to. I'm pretty sure the bass line sounds no different from the normal smart 5 or HD line they are full of crape. I'm just saying all this because the hate on these amps is real but the type of people that buy stand up for them in the wrong way. They will get all but hurt if you say taramps lake in controll or taramps don't hit lows good. When it comes down to it, it's a cheap awesome power.

@Facekicker

2 жыл бұрын

You've got a few things wrong. Please stop sharing misinformation.

@alanclark9000

2 жыл бұрын

@@Facekicker 4 ohms should not pull that much amps and put out that much watts. I'm not hating I'm just saying it how how it is. 💯 if I'm bitching why would I consider running one? Im telling the truth about these amps. Besides less power can sometimes just be better. you don't need a 5k amp doing 10k if someone wants a 10k they would have gotten a salt 4 by sundown. Now I was very impressed by the salt series by sundown. That's a amp you can fully stand behind if I was to come saying all this stuff about the taramps. Anything bad I said about the taramps you can't put on salt. BTW I don't really care for sundown

@alanclark9000

2 жыл бұрын

@@Facekicker if I gave taramps a score of how good they are out of 10 I would say 8.3

@Facekicker

2 жыл бұрын

@@alanclark9000 why shouldn't it? It's a Smart amp and it's efficiency was great. I don't understand what your criteria is. The Salt amps are a completely different technology and design - not sure why you're trying to compare the two.

@Facekicker

2 жыл бұрын

@@alanclark9000 your "score" is based on incorrect assumptions and bad info. I'd encourage you to stop commenting for a minute and research a bit more before you mislead yourself and others even further.

You guys keep testing at such high voltage 14.89 14.39 14.5 man who car really gets that type of voltage (reality check) for all you amp testing dudes.. basically lying to us (not really) but you have to go out and buy two car batteries/do the big 3 all that crap you should test on 13 volts

@lewokejames

Жыл бұрын

Without extra batteries, high output alternator and big 3'sorry bud but you won't even be seeing 13 ... You'll be dropping to 10 and start a fire. So maybe you need to look into some nice 1000 watt amps