Would it be possible to mount the rear adjusters in a more accessible location, like the rear of the wheel well?

@accutuneoffroad

2 жыл бұрын

The kit is designed a specific way for best fitment. Rerouting the reservoir is not something we would really be able to make suggestions on.

12" Coilovers in the rear as well? 5" of uptravel? Really? With 4" of lift on the EVO kit I've barely got 2" of down travel on a 10" coilover.

@accutuneoffroad

5 жыл бұрын

Our kit is designed to maximize the travel capable in a JKU. The lower mounts are lower on the axle and the upper mounts are higher on the chassis.

Will it work with the factory sway bar? Also, can it be set up with some rake? I like to keep the stance at least level ride when loaded for a 4x4 trip, which results in about an inch of rake when unloaded.

@accutuneoffroad

5 жыл бұрын

It will work with the Factory Front Sway Bar, but the not the rear factory sway bar. It can be installed with a rake, and for your use we recommend setting it up with 1" more up travel in the rear so you have similar amounts of up travel when loaded. Feel free to give us a call and we can help in more detail.

What are the spring rates you guys use for the rear 2-3/4” lift?

@accutuneoffroad

4 жыл бұрын

Spring rates will be determined by vehicle weight, so every vehicle will be different.

Do you have 3.5" lift

@accutuneoffroad

6 жыл бұрын

Hi Dumidu, this kit can be adjusted to provide 3.5" of lift.