PLEASE READ - ADD-ON LEARNINGS BASED ON FEEDBACK: 1.) Different than stated in the video, turn FXAA "ON" in the Assetto Corsa Video Settings (time stamp 09:53). Instead, disable FXAA in the "Graphic Adjustments" Section for Custom Shaders Patch in Content Manager (screen at 05:21 - scroll further down than shown in the video). With my original procedure described in the video, some effects will not work. 2.) For users that are battling low fps despite very good graphic cards, or with micro-stutters! Check this topic how to de-activate HolographicShell: www.reddit.com/r/HPReverb/comments/xo5v2z/holographicshell_processwindows_11_performance/ Batch file to de-activate HolographicShell: forums.flightsimulator.com/t/win-11-update-causing-stutters/543631/127

@Norse1957

Жыл бұрын

One thing is looking very different on my system, having to do with anti-aliasing I believe, so I'm wondering if it's in the Nvidia Control Panel settings... Can you share yours?

@wanderschikanentv

Жыл бұрын

@@Norse1957 Hmmm, there's a whole section on the NCP settings in the video ... ;-)

@Norse1957

Жыл бұрын

@@wanderschikanentv Doh! I had skipped to the installation of Open Composite, OpenXR toolkit, and beyond, and missed the second section you covered briefly on NCP. Sorry about that. Still, I must have something else off somewhere because my lines on track, poles, fencing, etc. looks garbage, which was why I thought you had something different in NCP for AA. Nevertheless, thank you for the video because it did improve things in VR for me.

Well done! Really detailed info given and a nice balanced speed so it could be easily followed but no nonsense pausing and no music stuff to make you nervous. That´s the way I love it!

@wanderschikanentv

Жыл бұрын

Thanks for the feedback!

Thanks so much for making this video. Having applied all your suggestions, AC looking and running as well as I can remember. Navigating the OpenXR menu is a right pain though!

Fantastic, great improvement for the performance in high quality settings, thanks a lot!

Thanks a lot man, I've been battling with fps problems on steamvr, weird stutters, fps drops and so on... this actually helped me and game is running smoothly on 3080! The clarity is just insane, can't even compare with old settings I had ...

@wanderschikanentv

Жыл бұрын

Enjoy the NEW VR experience!

Thx a lot for this. I followed all your steps and AC looks and drives now amazinlgy well in VR. (g2 reverb + 3080ti).

Genau so ein Video Fehlte mir echt für AC. Vielen lieben Dank dafür 👍🏼

Thanks for this. I've looked at alot of other guides on KZread, but yours is the best. I use a Pico 4 headset and your settings really helped me to set it and enjoy the racing, rather than spend hours tweaking things, which is exactly what I wanted.

@wanderschikanentv

3 ай бұрын

Glad you like it, mate!

Danke für deine ganze Mühe mit dem Video. Ich hab jeden Schritt befolgt mit meiner G1 und muss sagen, das Ergebnis ist wirklich überzeugend. Und endlich mal ein englischsprachiges Video, das ich ganz leicht verstehen konnte 😊. Danke dir!

@wanderschikanentv

9 ай бұрын

Vielen Dank!

This works great! Thank you for the thorough explanation. I’m using an HP Reverb G2,RTX 3060, i7-10700K, 32GB RAM and getting 88 to 90 FPS consistently. Still seeing some artifacts within objects that have tight patterns at further distances. I’m guessing this is just a limitation of my GPU or some graphical settings in CM/CSP.

On a fresh PC with rtx4080 and i5-13600, AC was running with SteamVR on Reverb with 50fps and bizarre light flickering, whatever i tried. This Opencomposite thing is a whole different experience, many thanks for the video ❤

Amazing video! Sehr gut und komplett erklärt. Vielen lieben Dank!

Ahhhh the high glare settings! That finally fixed the damn artifacts I had! Thank you!

excellent video. You are a true VR black belt. thank you!!

@wanderschikanentv

Жыл бұрын

Thanks!

Man, Thank you for this... A really great, thorough video. I would love it if you could do something like this for F1 22. OpenXR was looking good for me in that game, only it keeps crashing on me.

Thank you, it's so much better now!

Your picture look really good dude

Huge performance increase for me on a i9-9900k@5ghz, 2080ti. 91 stable. Thanks so much.

internet is magical When an extraordinarily nice guy spends so much time to save time for total strangers Huge thank you

@wanderschikanentv

Жыл бұрын

Thanks for the kudos and glad you like it!

Hi Mate and a happy New Year to you!!!!. I used all your settings for AC & AC competizione, and they worked brilliantly!!, I must say out of all the youtube tutorials yours is actually perfect , great step by step guides. Just wondering being that CSP in ac is constantly being updated/changed if I should alter anything?. I would love if you could give your thoughts on the latest version of CSP to see if anything should be altered. Thanks so much for your great tutorials mate .

@wanderschikanentv

5 ай бұрын

Thanks for the nice feedback! Honestly, didn't find a lot of time recently to look at the new CSP features yet :-\

@nick61

5 ай бұрын

No problem mate. Thanks for replying Please keep up the great videos@@wanderschikanentv

Thank you so much for this video. Your settings are a game changer for me, the clarity and FPS is so much better, I can comfortably use VR now instead of getting nauseous after 10 minutes! Can you do a similar video for MFS2020 pretty please!?? 🙏🙏

Great job mate...next up ams2 tutorial!!!!

@wanderschikanentv

Жыл бұрын

THX mate!

I just got a HPG2, I followed your instructions, and the difference with WMR+SteamVR is just absolutly HUGE !!! OMG, what a difference ^^ I just can believe it ! Thank you very much my new german friend (I'm french 😄) My PC : 12700KF + 4070Ti + 32Go DDR5 5200 + SSD NVMe (7500MB/s theorical but 4500 real...) You makes me so happy, pal ! Now, I've got 90fps all along, whatever I do, and it's so beautifull and smooth ! 🙏👏👍👍👍

@wanderschikanentv

Жыл бұрын

De rien, mon ami francophone!

@cladecq

Жыл бұрын

@@wanderschikanentv Your instructions are very efficients, but I assume my recent hardware could do better, and I started to change some values. And found something absolutly amazing about the real effect of the "turbo" switch in opencomposite. This option ALONE divided by 2 my CPU AND GPU occupancy !! From ~both between 90 and 93%, simply using this feature got them down between 41 and 44% !!! And i'm sure about this because it's CSP frame counter, it's real thing ! Everything else inchanged. with latency (cumulated : CPU + GPU, so : maximum total latency) going down to 11.11ms all the time, like frozen to this exact value (floating btw 14 to 15ms without "turbo"), never more, never less than that 😳 like a "magic button" hahaha ! It's kinda suddenly double your ressources and kill all parasite latency... just amazing... But about FoV, I'm at 100% (I see too much the difference with 90%), and X4 MMSA, X8 aniso and FFSA checked, for cleaner long distance view. Even with this, on a track with 22 others cars on a race, with a quite an heavy model (RSS V8 1970 410 000 triangles !) I'm just above 80% (max recorded 83% at start of the race) occupancy on both CPU/GPU... Of course with 90fps all along. Never 89.9, always sticked at 90. With absolutely fantastic graphics (sol/pure/weather fX). just... wow ^^ I just changed my Oculus CV1 (had this from 2018) for this HP reverb G2, and you can imagine how I'm stunned by the change, now I can run it the most efficient way. So : Tx a lot for your opencomposite tuto ! It changed everything from this horrible WMR+SteamVR solution. Just nothing to compare. I'm the most happy simracer of the day, but not because I won a great race ! hahaha ! 😄

Really a great video. You use some different settings than I do so going to experiment how your settings will work for me. There are just so ridiculous many settings to mess around with ;) Edit - this helped a lot. I only had FFR on in Toolkit and set to performance but your settings give me a lot more fps. 90fps in heavy rain at Targa on my 2080S, with FSR set to 67%. Perfect!

@wanderschikanentv

Жыл бұрын

This sounds very good! And indeed, the number of settings is overwhelming at the start. The 90 fps in rain - do you get them in Hotlap or even in race?

@MrEDET

Жыл бұрын

@@wanderschikanentv This was in solo mode on Targa Florio, one of the most demanding tracks so I always use that one for fps testing. I think I won't get 90fps in a race there but for races in the rain I'll just lower the fsr setting a bit.

@MrEDET

Жыл бұрын

@@wanderschikanentv I honestly have been messing with the settings since I got my G2, 2 years ago now. I thought I finetuned it to get max results for my system but man.. with your Toolkit settings I could increase the graphic details in CM while still getting a 90fps and higher resolution. In solo mode I now get 90fps with heavy rain on on all tracks I tested, but just did some races at Fonteny which is also a very demanding track. Heavy rain, night, 19 AI - I had to drop my FSR to Balanced mode to get 90fps in that situation. But the thing is - with rain it doesn't matter too much if you drop the fsr, since the vision is already so bad you don't notice the more blurry graphics as much as with clear weather :) You should post this video on the AC reddit sub though, think you will make a lot of people happy with this one ;)

Haven’t downloaded the toolkit yet but just from those settings without fxaa and without PPF I’m seeing a mass improvement in no hesi server and I can run pure online in 13 ppl games at 75fps on rift S. Excited to tinker with toolkit now !

Thank you so much for this! How did you record the game play? Switching to OpenXR made the SteamVR plugin for OBS useless. Would also appreciate your thoughts on setting anisotropic filtering to 16 in Nvidia settings (and off in game).

@wanderschikanentv

Жыл бұрын

I use GeforceExperience and record the mirrored flatscreen. You need to change the key binding for Manual recording (default Alt+F9 overlaps with an AC function, I think Leaderboard Display), and in Windows Mixed Reality Portal setting, you have to select the manual change of input device from desktop to VR headset (Win + Y) so that you don't have the blue notification in the top of the mirrored flatscreen.

good content. I only wish you have kept FPS meter for "results demonstration" part of the video.

@wanderschikanentv

Жыл бұрын

THX for the feedback! Online fps meter is not straightforward, as the race content is recorded from the mirrored flatscreen by Nvidia Geforce Experience. The OpenXR Toolkit fps counter is not displayed there, unfortunately.

Can't thank you enough mate.Transformed AC for me. Steady 90FPS from 59.5 previous. Only thing I'm unsure about is the point in note 1) where exactly do I disable FXAA in the graphics adjustments section? I cannot see this option. Cheers.

Thanks à lot for that vidéo. You won a new subscriber😊. Are your nvidia settings différent with a AMD 6800xt (mine, obviously)? I also have a HPReverb G2.

@wanderschikanentv

9 ай бұрын

Hi, I don't have experience with AMD Cards, so I don't know what you can modify in their drivers, sorry. Try searching for items that sound similar as a starting point. THX for the subscription!

Hey thank you for the video, your settings work quite well with my rtx 3070ti even in no hesi server, only gripe is: 1. fences and dense renders do flicker quite a lot :( 2. when in servers with traffic, the lights of the cars keep popping in and out, also traffic in general renders in quite late. Any idea how to fix these? Might have to do with the render distance?

I'm also running G2 with 3080. Have to try some of these tips. A few comments: -Anisotropic filtering: X2 seems low to me. I have it off in AC settings and instead force a better quality x16 filtering from Nvidia control panel. -Having FXAA off in AC video settings you are losing some CSP functionality that rely on intercepting FXAA. There is a setting in CSP graphics options to disable FXAA without losing those features.

@wanderschikanentv

Жыл бұрын

Good point. I forget to mention that in "Graphic Adjustment", I have FXAA disabled, but I didn't realize I need to keep it on in AC Graphics Settings. THX for the heads-up! I will check the AF via Nvidia Control Panel as well!

Thank you sooo much for this guide, I've been battling for years to improve my graphics, now they're almost perfect, frame times of cpu = 2ms, gpu = 7ms, 35 - 40% gpu headroom; amazing! Trackside objects, scenery and sky all look amazing, but track itself is still blurry, and ideas? I can't do the fov render settings in openxr as I'm on AMD (7900xt)

@wanderschikanentv

3 ай бұрын

You could try to further bump up the custom resolution in OpenXR Toolkit

I love your setups 🤩. Some settings surprise me, for example, the low level of the MSAA and Anisotropic filters, however, they get great results. Why do you use such low values ​​and get such good results?

@wanderschikanentv

Жыл бұрын

Well, a 3080 is a good, but not exactly the higher performing graphics card ;-) So, I had to work a lot on balance between beauty and speed.

One thing I'm wondering about and couldn't find any concrete information for - in Nvidia you have the prerendered frames set to 3 right? For most sims I see a recommendation to set this to 1. Was there a specific reason you set this to 3? To be honest I don't notice any difference if I use 1 or 3.. just curious if you have a theory why 3 might be better :)

I was wondering if you were able to do a revised settings for Assetto Corsa with all the new Custom Shaders Patch options. I am using the new Purevr filter which seems to work well, but there seem to be a lot of new settings options that I am not sure about?

Hi! This is such a well made video I love it!! It definitely helped me gain more FPS. Though there are some issues I am having, on online servers with traffic, the FPS seems to drop to 60 quite frequently. I only seems to get 90 FPS in the pits. Do you have a discord or some other way I can contact you? I would love to show you these problems and see if you can help me propagate these issues. I tried fiddling with OpenXR toolkit and seems like the FOV changes don't make a difference for me that much. My CPU is 5800X3D, GPU is 3080, RAM is 64GB 3600MHz.

@wanderschikanentv

Жыл бұрын

Hi Anirudh, sorry, timewise, I cannot look in individual situations too deeply, but I'll share some thoughts here. Can you get 90 fps in single-player hotlapping or AI races? In general, AI vehicles will consume a lot of CPU power. How many AI vehicles are on the servers that you run? On CSP, there is the AI flood feature to mitigate this. See here: kzread.info/dash/bejne/jKqZpZqdoNDVYag.html

Great video, finally i get 90fps stable with my 2080ti, 10/10

@wanderschikanentv

4 ай бұрын

Awesome, enjoy the VR ride!

Thanks for this Video. Is it possible to deactivate the mirroring that shown on the Display?

Thank You

@wanderschikanentv

Жыл бұрын

Welcome!

Danke für das Video - ausfühlrlich und super gemacht. Hab die Settings übernommen - aber in Ferne habe ich leider so ein "flickern" das ich nicht weg bekomme :( - eventuell da einen Tip?

Great video, can I ask, would this be the same for a pico link?

@wanderschikanentv

Жыл бұрын

Unfortunately, I cannot tell, I don|t have experience with the Pico. Just give it a try and use my settings as baseline!

Hey I love your videos they’ve been very helpful for me with the reverb g2. Could you recommend me settings for iracing please?

@wanderschikanentv

Жыл бұрын

As for OpenComposite/OpenXR Toolkit, I'd carry over the AC setting as a starting point.

@joeymart1n

Жыл бұрын

@@wanderschikanentv I did carry the ac settings and I wasnt able to load into a test drive anymore. so I had to uncheck iracing from toolkit.. now idk how to enable it and load in. any suggestions? ty

Really good videos, but one thing to note is that adjusting the FOV in Toolkit isn't actually lowering the number of pixels that are being rendered. You're rendering the same number of pixels, just compressing them into a smaller area. So, not really a performance benefit. It can be useful when you can't run native resolution due to hardware limitations. In that case, reducing the FOV will compress the pixels into a smaller area creating a "free" super sampling effect. Also, the FOV settings are per-eye in Toolkit, and reducing the Left eye-right side or Right eye-left can cause eyestrain and headaches for some people, myself included, as you're essentially cutting out a 10% section in the dead center of the image, where the eyes should be overlapping. If you decide to reduce FOV, I would recommend only reducing the upper and lower limits, and then the outer of each eye. Leave the inner adjustments alone to reduce the chance of image destabilization, but again, there isn't a performance benefit to doing so because your headset is still rendering the same number of pixels.

@wanderschikanentv

Жыл бұрын

Hi Ken, interesting comment, I never saw the FOV left-and-right cutting in that way. Also good that you mention the left-eye-right-side and vice-versa thing, that's a valid point for sensitive users! Thanks for sharing your thoughts!

@KenOs1109

Жыл бұрын

@@wanderschikanentv Thanks for the great videos. My PC is a little more powerful than your PC, so I'm able to tune some settings up higher, but the base settings in all of your videos have helped a lot. Thanks for taking the time to make them.

@Superkamikazee

6 ай бұрын

Thanks for responding about this. I ended up leaving the default resolution.

Awesome! Thanks a lot for your efforts. Very helful. AC looks beautiful! I get heavy performance issues in AI races with 10 opponents. Practice 90fps.Any idea? Or just normal? Ryzen5800, rtx 3080, 32 GB, Reverb G2. Thanks again.

@Michelsen77

Жыл бұрын

Well i find myself a solution. I turned off turbo mode and turned on motioned reprojection set to 45fps... But i get flickering/tearing on the top of all trees? Can someone help?

@wanderschikanentv

Жыл бұрын

@@Michelsen77 try to avoid motion projection. I can run roughly 20 AI cars. Try some Kunos cars and tracks, maybe the low performance comes from not so well optimized mods.

@Michelsen77

Жыл бұрын

​@@wanderschikanentv i can't thank you enough mate! tried everything before. Turning off motion projection completely in openxr solved all the problems. The game even looks much sharper now but runs smoother. Wonderful!

Very nice video tutorial. When you can, could you upload and share another video with your openxr (opencomposite) configuration for Automobilista 2 (AMS2) game (HP ReverbG2 + RTX3080)? Thanks in advance.

@wanderschikanentv

Жыл бұрын

Check the channel, there's news ;-)

@fjcalderonogando

Жыл бұрын

@@wanderschikanentv Perfect. I just subscribed to your channel, I'll keep an eye out for updates :) By the way, I have a question for you, in case you can solve it in a future video. Inside steamVR, there is an option to "recenter" the position, accessible from the desktop or inside HOME or any VR game, using one of the controllers and accessing the main SteamVR menu. Some VR games also offer this "recenter" position functionality in their configuration options. When we use openxr+opencomposite we replace the SteamVR layer, because we are looking to optimise resources, as well as having more techniques and options to improve the final result, such as aspects of render upscaling and sharpening, foveated rendering, image post-processing, etc. Do you know if openxr toolkit or WMR offers, through any option or combination of keys, the possibility of "recenter" the position, if it were necessary?

@wanderschikanentv

Жыл бұрын

@@fjcalderonogando I'm not aware of such a dedicated recenter functionality. However, in all games that I use in VR (AC/ACC/AMS2/ETS2/DCS/Dirt Rally 2), it is possible to map a button in the respective control settings. In AC and ACC, while the mapped button only works on track, you can also press CTRL + Space in the pit menu, and it will recenter the view. Sometimes, you may need to Alt + Tab to the game so that it recognizes the pressing of the keys.

@fjcalderonogando

Жыл бұрын

@@wanderschikanentv I take note of your indications. Thank you very much for your reply.

Can you share your setting s using the share a link option in Content Manager?

For oculus i can test the same settings??

I was able to get all of this working, however no FFB in ACC whilst using OpenXR/composite. Any ideas?

I'm experiencing lots of flickering and aliasing on thin objects like fences. Has anyone else experienced this and have a solution? I have a i7-12700K, 3080, and a G2

@Norse1957

Жыл бұрын

Yep, same here. Mine doesn't look nearly as good as his, so it could be in the Nvidia Control panel settings (which he didn't share).

Great video. Most in depth on YT. I just cant seem to get the OpenXR control panel to show. I'm using a Pico Neo 3 though. Would that have anything to do with it?

@wanderschikanentv

Жыл бұрын

No experience with Pico on my side. Does the control panel work e.g. in ACC or AMS2?

@ViszlaBoss

Жыл бұрын

@@wanderschikanentv No, as soon as I have to use opencomposite the menu doesn’t show. Works great in iracing as you can used openxp natively without opencomposite. P.S. you openxp setting work a treat in iracing too. Thanks

@wanderschikanentv

Жыл бұрын

@@ViszlaBoss but you have installed the Openxr Toolkit? It is not part of Opencomposite.

@ViszlaBoss

Жыл бұрын

@@wanderschikanentv Installed both yes. But when I switch to opencomposite using the switcher app the game runs but I don’t get the option to open the menu settings. Totally confused!! 🫤

@wanderschikanentv

Жыл бұрын

@@ViszlaBoss can you confirm that the game really starts in OpenXR? If so, you get an animation of blue and white triangles. If it starts in SteamVR, the triangles are black and white.

HI, everything worked, great tutorial, however when I'm running OpenComposite, I lose my FFB in asseto corsa, steering wheel works normally, but without FFB. Need help.

@wanderschikanentv

11 ай бұрын

Hi, please check on the OpenCompisite Discord for support. I don't have experience with this issue.

anybody having any issues with new Nvidia app? I can't find anybody talking about it online anywhere regarding VR settings ect.. Anything change for any of you, good or bad?

So now that I have upgraded to an MSI 4070 video card, when I try to run OpenXR, I get the following error message: "OpenComposite DLLMain ERROR: Cannot init VR: unsupported apptype 6" Any idea why this would be happening? The card is a big upgrade over my old 2080 when running SteamVR, but really want to get it working in OpenXR.

@wanderschikanentv

11 ай бұрын

Could you fix it? Probably, you need an OpenComposite update.

For watever reason mines will not launch with the csp 1.80 but im using pimax. i dont think it shud make that big of a difference?

@wanderschikanentv

Жыл бұрын

I think I read that Pimax is a bit different wrt OpenXR, but I don't have experience. I suggest you consult the OpenComposite Discord.

how do you think it would perform and look with my i9 13900k 4090 and reverb g2 do you think i would need openxr tool kit and open composite?

@wanderschikanentv

Жыл бұрын

I'm sure that it performs super well as your system is mich strenger than mine. You can select mich higher custom resolution, and you probably can even leave FFR off.

@richardPalmisano

Жыл бұрын

@@wanderschikanentv ok what about opencomposite do i need that sorry what does ffr mean again

@wanderschikanentv

Жыл бұрын

FFR is the fixed foveated rendering part of OpenXR Toolkit. You can check impact of the opencomposite.ini value also. Set it to 0.8 as in the video, and compare to 1.0

What SS would I use in openXr for rift S? It’s 1280x1440 per eye, would I use that? Or 2560x1440? I’m on a 2070Super.

@wanderschikanentv

Жыл бұрын

I need to leave that question to the community, no experience on the performance on the 2070Super. I would start at default, though, and gradually increase.

Tried to do this for the vive pro 2, but it really screwed up the game and the VR performance completely, so be aware and maybe only do this if u have the Reverb G2 as it says in the title.

@wanderschikanentv

Жыл бұрын

I don't have experience with Vive 2 Pro, so hard for me to judge. Maybe try lower custom resolution values than mentioned in my video as the Vive 2 Pro has lower baseline resolution than Reverb G2.

Hi can these settings be used for the Quest 3

[EDIT] fixed with latest csp 1.80 preview 218. no more delay. thanks again also for the great settings, one thing i noticed that when i launch AC with openxr it takes alot of time like 1 minute to launch, but with steamvr its almost 5 seconds, do you know what could be the reason of this delay ? Danke schön :)

@wanderschikanentv

Жыл бұрын

No idea. I start AC out of CM. First time, it takes some time to load track and all cars, but if I finish and re-start the same event, it loads in seconds. Didn't check difference of SteamVR and OpenXR.

@rachedgt8897

Жыл бұрын

@@wanderschikanentv thnx buddy

@rachedgt8897

Жыл бұрын

​@@wanderschikanentv by readin the opencomposite log file, i found out that this setp: "Setting application name to OpenComposite_acs" takes almost 1 minute. i will investigate why and post the solution here so if someone has the same problem he would get the fix :D

I got OpenXR to work thank you but it added like a minute to my initial load time before the image of the track appears. Is that normal? Reverb G2, 3080ti and the game is on NVME

@wanderschikanentv

10 ай бұрын

For me, it stayed about the same. You can try whether it starts more quickly when you start Windows Mixed Reality manually?!?

I don't think the hidden mesh works in AC, I changed it to .1 and no difference. It does work in acc tho

@Superkamikazee

6 ай бұрын

Thanks for sharing that. I deleted the ini file.

hello! I'm here again. ... I go through the path of the game: assetto corsa>system>X64 .. and there I only have three files, two of them are .dll and the python33 folder. Where do I get the 'opencomposite.ini' files and the other 5 files? Thank you and sorry for bothering you please.

@wanderschikanentv

Жыл бұрын

Don't bother about the files, you only need to create opencomposite.ini. Make a file opencomposite.txt in Windows Editor or Notepad and change file extension from txt to ini afterwards. Worst case, you can go ahead without the file for a first start.

Hallo, habe alles genau nach Anleitung Installiert/Eingestellt und funktioniert auch so weit. Leider geht aber dann mein FFB beim Thrustmaster T150 nicht mehr. Gehe ich zurück auf SteamVR geht das FFB wieder. Vielleicht einen Tip für mich? Dank Frank Hello, I have installed/set everything exactly according to the instructions and it works so far. Unfortunately, my FFB no longer works with the Thrustmaster T150. If I go back to SteamVR, the FFB works again. Maybe a tip for me? Thx Frank

so i did what you said for the open composite and when i launch the game i get an error for opencomposite, so im not sure whats going on

@wanderschikanentv

Жыл бұрын

Best to post the specific error description in the Opencomposite Discord. I can only support in a very limited way on such errors.

How come you have upscaling enabled in both CSP (AMD FSR) and through OpenXR (CAS)?

@wanderschikanentv

Жыл бұрын

Hi Kyle, I use FSR for performance, and CAS for sharpening.

When I click the Ctrl+F2, no OpenXR window opens

Launching AC from the content manager must be very hard to do. Because none of these video ever show that being dome. How do you launch AC in VR from the content manager?

@wanderschikanentv

4 ай бұрын

If you set everything as described and launch it from Content Manager, it will run in OpenXR. No magic :-)

strange ? you are not using more tweaks VR of csp ? anyway I will try your settings...

@JoFandango

Жыл бұрын

not that good with a rtx 3060ti...

@wanderschikanentv

Жыл бұрын

To give some feedback to the community, what is not working so nicely on RTX3060ti. Is it clarity? Or fps?

@JoFandango

Жыл бұрын

@@wanderschikanentv both ! cas is working good with ams2 & rf2 but not with ac in my case ! with this gpu I have set 75% in openxr tool ! you didn't answer, you're not using "more tweaks vr" ind csp ?

@wanderschikanentv

Жыл бұрын

@@JoFandango Hi, the "Mode Tweaks: VR" section is active, but everything at default.

Can anyone go more in depth on creating the .ini file. I’m a newby and only have the option to create a text document when I click “new”

@wanderschikanentv

11 ай бұрын

Hi, look at my video on Dirt Rally 2.

Cries in 1070

disabling HolographicShell works on Windows10? Or just for W11 users

@JoFandango

Жыл бұрын

it is fixed by getting the lastest windows update

Thank you! I have 2 questions, i hop you can help me. You cant set the render protocol in AC on OPENXR, you only can start with OPENVR, when i choose OPENVR protocol also AC crashes (i did everyting like in the video) So maybe you can send me in right direction? OPENXR call failed, aborting XR ERROR FORM FactoR Unavailable.. I think it has to d with opencomposite, i cant reverse the TO STEAMVR or backwards button is greyed out... I thought i can uninstall open composite with Als wanted to downloaded the new componsite download, but i the zip file is corrupt, i ran a query: %localappdata%/openvr/openvrpaths.vrpath And found the only open composite is installed on my desktop.. Question 2: when i change the nvidia settings as mentioned in your video, my fps is massively 50% slower, what could this be? any advise, you would help me a lot, i want to run openxr with foveated function to get my 90 or perhaps 120hz! Also could you please make a better video about OPENXR foveated and that rendering resolution 50%, i dont get that part (did see video 10 times now :)

@wanderschikanentv

11 ай бұрын

It is right to set render protocol to OpenVR. When Opencomposite works properly, it will bypass other settings and use OpenXR.

@wanderschikanentv

11 ай бұрын

As for your other question, it seems that you are not using Reverb G2 (you mention 120 Hz). There I can't help, but I recommend to check on the Opencomposite Discord for assistance.

@wanderschikanentv

11 ай бұрын

Lastly, on foveated rendering, the concept is nicely explained on the OpenXR Toolkit website. Basically, you are reliefing the graphic card by rendering the perimeter of the VR picture at lower resolution while keeping the center of the VR picture at high resolution.

@ChrisdeJong-ADJ

11 ай бұрын

@@wanderschikanentv Yes Quest 2!

@ChrisdeJong-ADJ

11 ай бұрын

Thank you for your quick answers! The problem was Reshade, reshade doesnt work with OpenXR (when i was playing assetto) could you please help me explain ( i cant find it) with iracing and assetto. I hope u find some time and want to answer me (i know i am a quest 2 not G2, but still i want to know the logic perhaps you know it :) Question 1: In your video we need to adjust nvidia settings, when i do this i massively have framedrops of approx 20 fps...? Why is this? 3080 with AMD ryzen5600x / 32gb ddr4? I made it as exactly you described. Question 2: i also read people are editing ini files for example dxrenderw11.dll etc.. I didnt see you doing that to max out the GPU processor 0 -1 use? Not necessary? Question 3: Quest 2 is running now, but do you know if Oculuss debug tool is needs still to be tweaked ? (i know you are a G2 user:) Question 4: With open XR toolkit you can set rendering CAS / NIS etc, which is really the best one? I tried reading into it, but i makes no sense to me, sorry Question 5: When you launch a game, also the gamemonitor renders the visual, when i collapse the screen my framerate goes 20fps up! I am not recording yet. Why is this? I need to close the window but i need it also when i want to record video. I set the resolution of the windows af 1024x768... I am busy every evening finding solutions, but cant find it and i hope u have the answers :)

Hi, mussman Steam VR starten, oder lässtman das sein und aktiviert nur wie von dr beschrieben open composite? Ohne Steam VR zu starten, komme ich leider gar nicht erst ins Spiel. Und ich komme bei Min 10:45 leider nicht weiter. Wenn ich Strg+ F2 drücke, erscheint nicht das Menü. Was mache ich falsch? Danke euch

@wanderschikanentv

Жыл бұрын

Du kommst irgendwie nicht nach OpenXR, deshalb funktioniert Strg+F2 nicht. Geh mal nach OpenComposite.exe und schalte dort einmal zurück nach SteamVR, und dann wieder zurück nach OpenComposite. Beende auf jeden Fall SteamVR und Windows Mixed Reality, dann prüfe noch mal alle Settings in Contentmanager und starte mal AC aus CM heraus. Eigentlich sollte das Spiel dann laden und Windows Mixed Reality öffnen, ohne dass SteamVR startet.

@sebastiannestler9818

Жыл бұрын

@@wanderschikanentv Danke für Deine Antwort. Das Problem ist, sobald ich im Content Manager das Rennen starten will und das Headset aufsetze, aktiviert sich diese Windows Mixed Reality Software, aber das Rennen wird nicht in der Brille gestartet. Wenn ich Steam VR an machen und ins Rennen gehe, dann funktioniert es. Ich komme also gar nicht erst dazu STRG + F2 oder links, rechts usw im Game zu dücken. Weisst du was ich falsch mache?

You use some contradicting settings in Nvidia panel. Low Latency Mode makes sure you don't use pre-rendered frames and reduces latency this way. Virtual Reality pre-rendered frames queues pre-rendered frames for GPU, increasing the latency. Maybe I'll test how it behaves myself, but these settings seem like they alter the same thing but in opposite way, so I'm not sure which of the two is prioritized when you set it like that.

@wanderschikanentv

11 ай бұрын

Honestly, not all of my settings are scientifically supported ;-) but they are a pretty good mixture of best-guess and positive experiences :-)

I got a 3080 and a 5600x 32GB of 3600 mhz ram and all my pc wants to do is crash when i boot a game in steam VR for the most part sometimes it runs and when it does it's d support smooth but 95% of the time it just crashes orrr goes into theatere mode its so annoying

@wanderschikanentv

7 ай бұрын

What you mean with Theatre Mode? The mode from SteamVR? If so, then your game is not going to OpenXR. Check all settings carefully in OpenComposite and CM, and close SteamVR before starting the game out of CM.

hold on how do i use the editior to create it opencomposite.ini file?

@wanderschikanentv

Жыл бұрын

It is the regular Windows Editor/ Notepad. Make a txt file and rename it after racing from .txt to .ini

I’m getting error: “Unknown config option hiddenMeshVerticalScale on line one” What might I be doing wrong when I create the .ini file? Thx!

@wanderschikanentv

Жыл бұрын

But you write the full line in the file? hiddenMeshVerticalScale=0.8 ?

@henryhancock6558

Жыл бұрын

Yes I did but the error doesn’t show or include “=0.8” Just the words are in the error message.

When i use steamvr, or openxr. I got both 89.8 average fps in benchmark. Doesn't really matter for me. I don't use amd fidility, and use 100% ress scale, maximum settings. Biggest improvement for me was turning off holographicshell in windows. Big fps boost in vr. Especially for win11 users.

@wanderschikanentv

Жыл бұрын

On the top-end RTX4090, FPS-wise, usage of SteamVR or OpenXR doesn't matter. On RTX3080, OpenXR is superior. De-bottlenecking by switching oft HolographicShell in Windows is a good point that you are making.

@antoniosvigkas4705

Жыл бұрын

@@wanderschikanentv what is that setting for exactly?

@wanderschikanentv

Жыл бұрын

For users that are battling low fps despite very good graphic cards, or with micro-stutters! Check this topic how to de-activate HolographicShell: www.reddit.com/r/HPReverb/comments/xo5v2z/holographicshell_processwindows_11_performance/ Batch file to de-activate HolographicShell: forums.flightsimulator.com/t/win-11-update-causing-stutters/543631/127

@bungg1337

Жыл бұрын

@@wanderschikanentv Awesome explanation wander. Im on Nvidia 4080rtx, AMD5900x, 32gb btw. I didn't know about the hiddenMeshVerticalScale trick. It's a nice trick to boost fps also.

@antoniosvigkas4705

Жыл бұрын

@@wanderschikanentv oh I see… I still refuse to go on win 11 though. I have no issues with 10 so no need to risk the update yet. Thnx for your answer.

Ok so I can use openxr instead of steam vr right. I want to open assetto corsa with openxr and not steam vr, can I do that?

@wanderschikanentv

Жыл бұрын

Just start with the "Use SteamVR" option, it will use OpenXR and bypass SteamVR.

@richardPalmisano

Жыл бұрын

@@wanderschikanentv where is the use steam vr option located

@wanderschikanentv

Жыл бұрын

Forget my comment about SteamVR, just set everything in Content Manager as in the Video, and the game will start in OpenXR.

@sebastiannestler9818

Жыл бұрын

@@wanderschikanentv without starting steam vr, I can't run Asseto Corsa in Content Manager. I really did everything from your tutorial, but it will not start

@wanderschikanentv

Жыл бұрын

@@sebastiannestler9818 Hard to comment from remote what is the issue. If possible, maybe first try to get ACC or AMS2 running in OpenXR to see whether you can get any simulator running in OpenXR: they are more easy to set up. I still feel that your AC have never gone to OpenXR mode yet.

I have an error while starting AC - XR_ERROR_SYTEM_INVALID xr_ext->xrgetd3d11grapihicsrequirementsKHR(xr_instance, xr_system, &graphicsRequirements) Anyone help? :(

@wanderschikanentv

7 ай бұрын

Best to check OpenComposite Discord or OpenXR Toolkit Discord for assistance on technical errors.

Hi, super Video, ich hab nur das Problem, dass sich Openxr im Spiel nicht öffnen lässt. Weiss jemand Abhilfe?

@wanderschikanentv

10 ай бұрын

OpenXR ist nicht aktiv, daher kannst Du das Toolkit nicht ingame öffnen. Prüf noch mal die Schaltfläche in Opencomposite (notfalls mal nach SteamVR schalten und wieder zurück zu OpenComposite), dann noch mal die Einstellungen im Content Manager prüfen, PC neustarten . Dann vor dem Start von AC SteamVR NICHT starten. AC starten.

Hi thks, can you do the same with dcs world please

@wanderschikanentv

Жыл бұрын

It's in my to-do list, but I need to ask you for some patience.

So strange. I was getting a solid 90fps after following this video. After not having played in a few weeks. I'm only getting around 60. I check every setting and I haven't changed anything.

@wanderschikanentv

Жыл бұрын

Maybe some Windows Update that screwed things up? Google for VBS and HVCI and make sure it is deactivated.

@TheDive25

Жыл бұрын

@@wanderschikanentv last few weeks been getting solid 90fps on every track and race besides rain. When there's rain it drops to under 60fps. Got all the latest Pure and CSP updates. Game looks better than ever and I can't thank you enough for this video. I come back here every few weeks to see if there's been anymore tweaks.

I followed the directions like a map but for some reason open composite isnt wanting to load i did the ini and everything saying error code -13 openxr call failed, aborting the microsoft app isnt working either

@wanderschikanentv

2 ай бұрын

So, you are on Reverb G2? I am not sure whether it is the same issue. I couldn't get anything running in OpenXR recently. What finally helped, was doing the latest Windows update plus updating everything in Microsoft Store. Then, I was able to use OpenXR.

@ninjapug0293

2 ай бұрын

Ahh no I’m on the htc vive cosmos elite and thought I could use the same thing

@wanderschikanentv

2 ай бұрын

@@ninjapug0293 ah sorry, no experience whether there is some way to make this work

Can I delete the OpenComposite installer?

How do you launch AC in OpenXR?

@wanderschikanentv

Ай бұрын

Set everything as shown in the video and start AC through Content Manager

What csp patch are you using?

@wanderschikanentv

Жыл бұрын

It is written in the description here, please check there.

Mine doesn't have Foveated Rendering, how can I solve it? I have an RX 6600 From what I saw it supports this Foveated Rendering due to the fact that it is from the 6000 series

@wanderschikanentv

2 ай бұрын

Not all cards support FFV, see OpenXR Toolkit website. You can leave it as it is and lower the custom resolution if you need higher fps.

@thiagolorenzato

2 ай бұрын

@@wanderschikanentv The website says that the RX6600 supports FFV

@wanderschikanentv

2 ай бұрын

@@thiagolorenzato I think the limitation applies that you cannot use it in ACC as it is DirectX11. I can see here some discussion in the comments to force ACC to DX12: www.overtake.gg/threads/assetto-corsa-competizione-version-1-3-11-is-here.183258/ May be you can further check on this?

Do you have one for iracing?

@wanderschikanentv

Жыл бұрын

Sorry, I don't use iracing atm. Bot for the opencomposite and openxr Toolkit part, my settings probably give a decent baseline.

mine is 1080ti is it possible? my output is downsampled

@wanderschikanentv

Жыл бұрын

As far as I know, it is possible, but not all features of OpenXR Toolkit are available on GTX cards. Also, you have to lower values like Custom Resolution, and maybe try NIS instead of CAS.

@user-nx8ov2vl2s

Жыл бұрын

Thank you. I will try your suggestion.

und wie bekomme ich das OpenXR Kit auf ohne in VR sein zu müssen? wenn ich das in Single Screen drücke passiert nix und wenn ich in VR bin dann geht es nur wenn ich das HS auf habe??

@wanderschikanentv

4 ай бұрын

Das Toolkit siehst Du nur im Headset

@oSTARGAMINGo

4 ай бұрын

@@wanderschikanentv okay na super haha, mein SIM Rig steht weit weg von meinem pc 😂 dann mach ich vorher Screenshots 😂😂

@oSTARGAMINGo

4 ай бұрын

@@wanderschikanentv hab Fixed Foveated Rendering nicht als Einstellung… geht das nur auf NVIDIA Karten? Hab eine 6700xt :/

@wanderschikanentv

4 ай бұрын

@@oSTARGAMINGo geht nicht mit jeder Karte, Übersicht über die Funktionen gibt es auf der Homepage vom Toolkit

@oSTARGAMINGo

4 ай бұрын

@@wanderschikanentv dann hab ich wohl Pech aber Compisite läuft auch so und hilft schon mit Stutters 🤝👍🏻 hab jetzt konstant so ca 65-80 je nach map das finde ich okay, danke dir für die Hilfe 🤌🏻

Kannst du n 2023 update machen da ist viel dazu gekommen.

but SteamVR still opens after click LOS in Content manager and plaky AC in VR. opencompisite is set correct. ACC workds without SteamVR..... I also have no toolkit in AC.. the exe is not listed in the companion app

@wanderschikanentv

Жыл бұрын

"OpenVR" is selected in Graphics section for Assetto Corsa in CM?

@der60er

Жыл бұрын

@@wanderschikanentv ja. ich kann ja auch in VR fahren. aber halt nur mit geöffnetem SteamVR. trotz opencomposite

@der60er

Жыл бұрын

@@wanderschikanentv oder muss man oculus rift auswählen ?

@wanderschikanentv

Жыл бұрын

@@der60er Hast Du eine Oculus? Da kann ich nicht weiterhelfen, habe ich keine Erfahrung mit. Einfach mal probieren.

@wanderschikanentv

Жыл бұрын

Ansonsten: mach mal Mixed Reality Portal zu, und schalte in OpenComposite einmal zu Steam und wieder zurück zu oben Composite. Dann Mixed Reality Portal starten (nicht Windows Mixed Reality for SteamVR!). Dann Spiel aus CM starten (OpenVR Option in den Graphics Settings).

How do you start the game without useing steamvr?

@wanderschikanentv

Жыл бұрын

Do all settings as in the Video and start from Content Manager.

Is OpenComposite Launcher needed? The download is not working...

@wanderschikanentv

Ай бұрын

You can alternatively do the "per-game" install as described on their website. Use the 64-bit dll.

@piereligiodisante

Ай бұрын

@@wanderschikanentv yeah it's what I've done and is working nicely, thanks 😁

@wanderschikanentv opening the toolkit menu ingame didnt worked for me. Any ideas how i can fix it? Thank you

@wanderschikanentv

2 ай бұрын

Please recheck the settings of AC and OpenComposite. Your game is still starting in SteamVR. There is a bit more explanation on this in my Dirt Rally 2 video.

@1wifi_bar

2 ай бұрын

@@wanderschikanentv thank you for the quick anwser! I already switched to opencomposite to run it in OpenXR

@wanderschikanentv

2 ай бұрын

@@1wifi_bar does it work now?

@1wifi_bar

2 ай бұрын

@@wanderschikanentv i still cant open the menu in the game 🤔

@wanderschikanentv

2 ай бұрын

@@1wifi_bar Close SteamVR. Close Windows Mixed Reality. Open OpenComposite and Switch to SteamVR and back to OpenComposite. Restart PC. Open Windows Mixed Reality and make Sure that SteamVR is not started. Then start AC from Content Manager.

The new version of open XR doesn’t show fixed foveated rendering, what can i do ?

@wanderschikanentv

5 ай бұрын

What graphic card do you have? Not all graphic cards support FFR.

@GnarAspira

5 ай бұрын

RX 6600@@wanderschikanentv

@wanderschikanentv

5 ай бұрын

@@GnarAspira hmm, should support FFR, according to OpenXR Toolkit Homepage. No idea from my side :-/ I suggest you check OpenXR Toolkit Discord

@wanderschikanentv

5 ай бұрын

It seems like FFR is only supported on your graphic card in DirectX12 applications.

@wanderschikanentv

5 ай бұрын

Supported graphics cards

where do i get openCOMPOSITE INI FILE

@wanderschikanentv

Ай бұрын

1.) Make sure that you see filename extensions in Windows. 2.) Create file opencomposite.txt in Windows Editor/Notepad 3.) Paste content in this file and save 4.) Rename file from .txt to .ini 5.) Done :-)

My game don't work anymore .... I've pico 4 and followed your instruction before realising it's not handle by OpenCoposite ... my game crash evry time now even with steam VR ...

@charleshermand8951

11 ай бұрын

No game want to lunch in steam VR now, i can play anithing at all ! i so sad

@Test1ngOneTwo

10 ай бұрын

You probably have to just open the opencomposite tool again and switch back to steamvr! Hope this helps!

I dont have fixed foveated rendering, help me!

@wanderschikanentv

Жыл бұрын

What graphic card do you have? It only is available on RTX, but not on GTX series.

@HecioOliveira

Жыл бұрын

@@wanderschikanentv Thanks, i have a gtx 1080