I love buying reels that people think are broken and fix them. Abu Garcia's are so easy to fix and I love them.

@2ndChanceTackle

3 жыл бұрын

That is part of the fun of the hobby. Thanks for watching - Dennis

I spooled it with 8 LB test mono for lighter lures, gave it some practice casts and found that it did cast well kzread.infoUgkxSlytCJqozTF7EbdP4LWP-HUXf9WRDJ0e , except that the anti-backlash setting had to be turned up almost all of the way to keep the "overcasts' ' down. I disassembled it, and found that if I potted some "shim washers" behind that anti-backlash magnet assembly, it got the magnets closer to the spool without rubbing, and I could get better control with about a 6 to 7 out out 10-Max setting. I also noticed that the handle shaft had some internal end play, maybe only 2 or 3 thousands of an inch, but it's still noticeable. If the anti-backlash and shaft tolerances were "tightened up" this would be a fantastic value. I've only used it for 4 days of fishing in a month's time, but I plan on keeping it.

@2ndChanceTackle

11 ай бұрын

Yes - the Abu lineup is complete with a lot of very nice reels at a good price point

Thanks for the video. I just acquired a 5500c. It looks brand new! Found your video to get an idea of how it works and everything seems to be working great.

@joycedimaggio3816

4 жыл бұрын

What lb. Line is best for this reel? Thanks.

@2ndChanceTackle

4 жыл бұрын

I like 12-15 pound mono or 15-30 braid. Heavier lines slow down casting and the reel was designed for fish in the 5-10 pound category

one of the better online videos on ABU reels. THANKS

@2ndChanceTackle

5 жыл бұрын

Thanks for watching Jeffrey and thanks for the kind works. Please stay tuned for more. I will be doing an Ambassadeur Seven in the next few days, so watch it an learn if you want to see more - Dennis

Thanks Dennis! Great ABU 5500 maintenance. Exactly how I did it to mine, but it took me an hour :] I've done a 5000 and a 5500. I have another 5500 and a 6501 yet to do...thanks fo the great tutorial.

@2ndChanceTackle

5 жыл бұрын

You are welcome Bill. Please stay tuned. I just posted the Ambassadeur Seven Syncro. It has a unique drag system. More to come - Dennis

@billwalker4836

5 жыл бұрын

@@2ndChanceTackle The one I did was a 5500C SYNCRO. The other two I have yet to do are not Syncro's I'll take time to watch that other video you mentioned. Thanks for recording and sharing this valuable info with us. I was always hesitant to open my reels up and other than exterior cleaning I had only opened up an old Mitchell 300...not so much anymore. The cameras in the smart phone make instant photos a breeze. Thanks again for giving confidence with education. You Rock.

Thanks for this video. I finally got it back together. I lost the e clip once but finally found it and that had me worried. I was not tightening down the thumb screws with screw driver and it would not make the line screw work back and forth side to side then finally I tighten the thumb screws more with a screw driver and the line screw began to work. Come to find out the guy who sold to me said he only used the reel once or twice I didnt not need to take it apart in the first place but me trying not to be lazy I did and it didnt need anything but I did put some more grease on it anyway. wow I spent all afternoon on it sheesh. It was not even dirty at all. It needs some line on it though. Glad that's over now.

@2ndChanceTackle

2 жыл бұрын

Glad to hear you solved the problem! Best wishes for great fishing with the reel - Dennis

Great video! Very thorough,clear, and PRECISE .Thanks... very helpful!!

@2ndChanceTackle

3 жыл бұрын

Glad you enjoyed it! Thanks for the kind feedback and for watching - Dennis

Your knowledge is so helpful! Thank you!

@2ndChanceTackle

2 жыл бұрын

You are welcome! Thanks for the note and for watching - Dennis

Thanks for the info. Dennis. My 20 year old 5 star works like new. Awesome !!

My most favorite reel!

@2ndChanceTackle

6 жыл бұрын

These are great reels. As long as they are kept clean and lubricated, they will last a long time. I hope the video showed how to do that. - Dennis

@snookdock

6 жыл бұрын

2nd Chance Tackle it did help thanks, I enjoy all your videos.

muchas gracias, me fue de mucha utilidad el video, ya lo arme al abu y quedo re bien

@2ndChanceTackle

4 жыл бұрын

Gracias por mirar - mis mejores deseos para una gran pesca - Dennis

the minute you exposed those "bushings" on the spool...I would have made a comment...those are soooooooooo easy to lose !good video.

@2ndChanceTackle

6 жыл бұрын

plutoplatters Yes they are. And very hard to find too!

I like to find old reels and poles at thrift stores and yard sales. I clean them and get them in good working condition with new line. Then I give most of them away. When your old you get more joy from giving than getting.

@2ndChanceTackle

2 жыл бұрын

Well said and well done! Thanks for the note - Dennis

These are GREAT reels!

Great work

@2ndChanceTackle

3 жыл бұрын

Thanks you - I appreciate you watching - Please stay tuned Dennis

Excelente explicación desdé Barcelona Venezuela Francisco Sabino gracias señores

@2ndChanceTackle

Жыл бұрын

Gracias - Dennis

Another great and helpful video. I have another request for you if you don't mind. I have quite a few baitrunner reels, Shimano, Okuma and the Daiwa version as well, and the Shimano is getting to the point where it needs attention. I imagine they are a fairly similar break down, it would be nice to see how that second drag system works. Thanks again for another great video.

@2ndChanceTackle

6 жыл бұрын

I may have an Okuma Avenger bait feeder around. If I do, I will open it up for you, show you the operation and how to service it. - Dennis

a lot to that reel. nice job that's a great real !! to burn up a drag isn't from sitting in the garage that babby has brought a lot of fun to the owner for sir ten

@2ndChanceTackle

5 жыл бұрын

These were built to fish and it's the reason so many have been made and so many are still around. Thanks for viewing - Dennis

@victorremick9721

5 жыл бұрын

I AM GLAD TO SEE SOMEONE THAT KNOWS THE IN'S AND OUT'S OF THESE REELS.. THEY ARE WELL WORTH SAVING.. IT'S A PLEASURE TO WATCH YOU AT WORK. MOST HAVE LITTLE TRUBLE TAKING ANYTHING APART BUT FEW EVER GET PUT BACK TOGETHER.. A MASTER OF REEL REPAIR YOU ARE !!!!!!

@2ndChanceTackle

5 жыл бұрын

Thank you Victor, and thanks for watching. Please stay tuned for more - Dennis

Thanks for the video

@2ndChanceTackle

4 жыл бұрын

You are welcome. Thanks for watching - lease stay tuned - Dennis

Thank you for your videos there are very helpful and finding what's wrong with a 6000 I just purchased from eBay. I opened it up and found a lot of parts that need to be replaced drag washers pinion gear not sure if it's supposed to wobble I'm looking to replace parts that are old. There's some indication of rust on the shaft where drag washers meet . I would like to send you. For maintenance and repair .

@2ndChanceTackle

3 жыл бұрын

Joe - please send me a note to my email 2ndchancetackle@gmail.com and I will provide the repair information - Thank you Dennis

Great video. I have had my reel for over 30 years, even though it's working fine, I may need to replace the drag washer at some point . I just hope I can find the parts. Thank you...

@2ndChanceTackle

6 жыл бұрын

Sure. The hardest part is getting started! Hopefully the video gives you the encouragement needed for the project. - Dennis

@thejim3501

6 жыл бұрын

lifesyours247 Look up website hopeless. They have all the parts you need, guaranteed! + upgrades! With support, at the best prices.

@2ndChanceTackle

6 жыл бұрын

Will do - thank you for the tip. Do you have more info? My search is not showing - too many results! Dennis

@thejim3501

6 жыл бұрын

2nd Chance Tackle OOPS! Hookless! ( Dam spellchecker.)

@thejim3501

6 жыл бұрын

2nd Chance Tackle. 1/3 of the parts are interchangeable in ambassadors from the 60'S to. 2000 or so. Jerry Foran: www.hookless.com/index.html He is a great guy to deal with and knows EVERYTHING about the the Ambassador reels! Sales almost anything you want for them.

Probably the strongest round baitcast reel of all time

@2ndChanceTackle

5 жыл бұрын

It is certainly right up there with the best of the round bait casters. An enduring design outlasts all of the trends. best wishes for good fishing - Dennis

Great video. My 5500LC has been having a problem recently. The only way the clicker and line counter engages is when the drag is extremely tight. Not sure if it's worth a fix or just get a new reel!

@2ndChanceTackle

3 жыл бұрын

You may have a worn drag that needs to be replaced. I would try that first - Dennis

Keep up the good videos. I have an Abu Garcia Ambassadeur Five and the anti reverse will not stay in place. It will be nice if you can post a video on it. Thanks

@2ndChanceTackle

5 жыл бұрын

I will see if I can find one. The ratchet that is part of the anti-reverse should have an oblong center to match the configuration on the pinion gear sleeve. If it does not lock in, it will not stay in place - Dennis

@tornadof5thenature109

5 жыл бұрын

I have bot this reel to 4600 xDD@@2ndChanceTackle no idea how to use it yet

Great video. I subbed u!

@2ndChanceTackle

4 жыл бұрын

Thans for watching and thanks for the sub. Please stay tuned for more to come - Dennis

sir help me I want to upgrade my Penn 114 l2 with drag washers of carbontex washers how can I change them and want to loud the voice of my clickers

@2ndChanceTackle

6 жыл бұрын

Hasan - Please watch my video on the take apart and service of the Penn 4/0. It is on youTube at kzread.info/dash/bejne/aIyIxcqxc8qefdo.html It is not your exact reel, but the process to upgrade your drag washers is the same. Remover the old drags as shown, but replace them with the new Carbonex washers and I recommend new metal washers as well. Please send a question if you have problems. Thank you for asking - Dennis

G'day mate! Great video. Have or could you do a vid on an Abu 7000 c4 LD please? I service all my reels but I'm wary of this one. Also are there a replacement higher speed gear sets for them? Thanks in advance. 🇳🇿✝

@2ndChanceTackle

5 жыл бұрын

I think I have a 7000, so I will check and post the overhaul for you. It may be a week or so and I have a lot of end of season tune-up at the moment. I am not aware of a swap to a higher gear set on these reels. If you find they are available, please let me know - . Thanks for asking - Dennis

@williamraftery9734

5 жыл бұрын

2nd Chance Tackle thanks for your response. I'm looking forward to your posts. 😍

Dennis, have you ever worked on the 5500 2 speed? I have a question about the washer placement. No schematics were available for the 5500 2 speed versions

@2ndChanceTackle

4 жыл бұрын

You should be able to get the schematic for this reel at Abugarcia.com. go to schematics and page down under Ambassadeur. It is there. Here is a link that I hope can take you there directly s7d5.scene7.com/is/content/purefishing/Abu%20Garcia/Schematics/5500C3%202SPEED%2091-0.pdf - Dennis

I have the old gold 5000c Vantage abu. As much as I love this reel the drag never wants to tighten down. like even with locking down the star drag it still can get pulled off with ease.. I've already replaced the drag washer with carbontex. my next step is to shelf the reel.

@2ndChanceTackle

4 жыл бұрын

Sounds like something is out of sequence. If you can send me a picture of the internal drive stack, I will see if I can spot anything obvious. If you want to send the reel to me for service, I will give it a go. Send a note tor pictures to my email - 2ndchancetackle@gmail.com and I will give it a go and let you know the service particulars. I hate to see one go into retirement if there is still life left in it. Thanks for watching and for asking - Dennis

Can you install an instant anti reverse bearing in this model like on the 5500c3?

@2ndChanceTackle

4 жыл бұрын

I am not aware of that upgrade. The side plate case that supports the anti-reverse bearing is different and would need to be changed. I haven't seen it done - Dennis

I have 3 6500 C3 reels i bought at least 8 years ago. I went to do a drag upgrade and all three already had carbon fiber washers. Do you know what year they started doing this ?

Will the 6000-c have the same type of anti reverse. Great vid.

@2ndChanceTackle

5 жыл бұрын

Yes - it should have the tooth rotor under the main gear and the anti-reverse tongue, which rides on the bridge post

Wow, great help, sir where did u get that washer, how I can get washer for my Abu Garcia black max 3 low profile casting here in India. My black max too have some drag problem I want to repair it many times I did oiling and greasing but not getting smoothness. Kindly same on black max casting upgrade video.

@2ndChanceTackle

4 жыл бұрын

I don't know about a source in India. In the US we have a few distributors and these can generally be found on the Ebay auction site. You may want to try that, or search Abu for distributors in your area. - Dennis

Thanks for the video, much appreciated! I lost the C Lock and they are no longer available thru Abu Garcia or either of their online parts stores. Do you know what size it is? And where a person might find one? Thanks

@2ndChanceTackle

4 жыл бұрын

Doug - I don't know the size, but you can get an "E" clip assortment on EBAY or you can try you local hardware store. The O.D. may not be exact, but it is the Inside Diameter that matters here. If you order on EBAY, I would recommend the metric sizes. Thanks for asking - Dennis

@garthedie475

4 жыл бұрын

Abu still make these reels so the e clip would still be available.

Oh i have the abu 4600 C red bello....black reel high speed...

hey 1) i have an older 70s abu 6000 - only one drag washer..it's terrible...anyway to upgrade that to smoother / stronger? 2) any videos of disassembling/clean/grease the thumbar in abu 5600/6600? - that's where 90% of these reels screw up; and i'm nervous about taking it apart without some guidance... thanks

@2ndChanceTackle

3 жыл бұрын

You can get replacement drag washers and upgrade to Carbontex through Smoothdrag.com. That thumb bar is an issue and most of the time the frame needs to be replaced if it fails. I just pit a drop of oil on both sides. There is not much you can do to grease it or clean it. Thanks for asking - Dennis

I’m working on this reel currently, have it cleaned and am waiting on some carbontex drag washers to arrive. What are your thoughts on using Cal’s not only on the drag washers but for everything else as well?

@bartekdyszkiewicz1359

4 жыл бұрын

At least for the parts that need grease and not oil.

@2ndChanceTackle

4 жыл бұрын

Cal's can be used on both the reel and the drags. For the reel parts, it is a little thicker than the blue grease and it may slow the reel down, just not that much, so go ahead and use it. - Dennis

Hi Dennis, I have a ambassador reel but the line guide doesn’t move when reeling in. Any recommendations?

@2ndChanceTackle

5 жыл бұрын

Shane - The common failures that cause your problem are: Bent or worn pawl, broken worm drive gear (usually a plastic part inside the non-handle side plate) and a worn or damaged worm gear. There are other failure points, but I would check these first. www.abugarcia.com/AbuGarcia-reel-schematics.html All parts should be available. Get the schematic and check the model. They are available on the Abu website. Most are easily replaced. Best wishes - Dennis

@shanehoward9756

5 жыл бұрын

Thanks! I’ll check that out. I was hoping the reel was worth fixing as it’s in good condition otherwise. Thanks for helping me out

Hi Dennis, Funny you mention sticking drag. I own ten or so Okuma Convectors and Coldwaters. In almost all cases, the drags stick. By "drags stick" I mean, when you dial the star adjuster out, the drag doesn't release until some mysterious and unpredictable event occurs and then the reel responds to the star adjuster change. Other than taking the reel apart and correcting the drag discs, is there a technique a frustrated person can use to get the reel drags to perform as they should? Thanks

@2ndChanceTackle

11 ай бұрын

You need to take the reel apart. Usually as sticking drag is the result of dried grease adhering the fabric washers to the metal ones, which causes the stick. You can't try oil directly as the A/R clutch is on top of the drags and oils will affect that part

Do we need to grease a bit the drag washer with dry grease even if it's made with teflon?

@2ndChanceTackle

2 жыл бұрын

You do not need grease on teflon or plastic washers. If you want to put a light coat on the metals and then wipe it off, that will prevent those metals from rusting - Dennis

which is better internally the older or newer abu 5500 6500 c series? thank you for your help

@2ndChanceTackle

2 жыл бұрын

I like the older versions. I am not a fan of the newer models and materials

Awesome video! I just picked up an abu Garcia ambassador 5000 at a yard sale for $5.00 and this is going to help me service it. Only issue it has is it's just a little stiff so I should be able to tune her up

@2ndChanceTackle

6 жыл бұрын

Great price for a great reel. Send a question if you run into any problems and I will try to help. A little oil and reel grease goes a long way! - Dennis

@hillbillyholler516

6 жыл бұрын

2nd Chance Tackle I actually just finished getting it working like new. The only issue I had was when I reassembled it the reel was stiff cranking it. After I took it apart 3 times I realized the issue. I had the spool tension cranked all the way down and it was causing the entire reel to bind up. I loosened the tension up and presto! It's like new again. I didn't pay much attention to the rod it was on till just now. It's a shemono gl conquest. Not a cheap rod at all!

@2ndChanceTackle

6 жыл бұрын

Glad to hear of your successful overhaul - Wishing you tight lines! - Dennis

@hillbillyholler516

6 жыл бұрын

2nd Chance Tackle thank you! Couldn't have done it so easily without your video. ( Subbed) I can use the tight line wishes. With all the humidity lately the catfish have been staying deep so I have been skunking out lol.

Great reels. Add a carbontex drag and they are outstanding. One thing though, the thumb bar models can be an issue. I had a 4600 C3 with a broken thumb bar and to repair it required a complete frame. Uneconomical!

@2ndChanceTackle

4 жыл бұрын

I had one in the shop last month with the same issue. It was a broken pin in the thumb bar assembly. I wound up drilling into the thumb bar and replacing the pin with a piece of finishing nail to make it work, but you are correct, the uneconomical answer was to buy the whole frame. Thanks for watching - Dennis

@davidlove7825

4 жыл бұрын

@@2ndChanceTackle Dennis. This one had a broken thumbar. I think a 2 piece design would fix the issue. Still love my old round ABU reels.

Dennis, I have a similar issue to the other reply you made. The thumb-bar on my 6600 is acting up. Do I need to take the reel apart to apply oil? Also if it fails and I need to replace the whole frame not just the thumb-bar parts? Last - can you convert the 6600 into a push button style easily (like 6500) if you already have to replace the frame....THANKS

@2ndChanceTackle

3 жыл бұрын

You can add a drop of oil to each side where the thumb bar slides up and down. You do not need to take the reel apart. You cannot convert that reel to the push button. You would need to replace the entire side plate and gearing. I think you may want to wet the whole thumb and seams with a penetrating oil to see if that can add additional lubrication and possibly dissolve any grease or dirt buildup that may be causing it to act up. I believe the entire frame needs to be replaced - Dennis

Can you help me? I had an unusual problem with my abu 15 yr old 5500cs pro rocket. I figured it out due to your vides so THANKS. What happened while fishing big salmon the drag seized. No matter how much i turned the star drag out it made no difference on the drag pressure. Still locked. So at home I took the drag apart. I got the washers off but the brass wheel at the bottom was not moving. Normally I can pull that brass cog out and a little drag sits under there. I had to use a screw driver to pry the brass cog out carefully. Once out I noticed it had a hard time being refitted on the shaft so I took my dremel and polished the heck out of the shaft (only below the star wheel grooves) and i polished the inner hole of the brass cog as well. After that it was smooth again and i could re-assemble the drag again. In fact the brass cog actually spun very freely now.,...better then before. What do you think could have caused such a weird sort of seizure on the brass cog? Thank you

@2ndChanceTackle

Жыл бұрын

That sounds like there was a lot of torque put on the piece, possibly from a snag or twist. Sounds odd. Glad you solved the issue and that you have the reel fishing again - Dennis

@rattusrodney

Жыл бұрын

@@2ndChanceTackle Thanks again dennis. By the way...what would cause an abu baitcast reel handle to suddenly stiffen up. Making it difficult to turn the handle when retrieving but the actually casting/free spool was fine. Only when you retrieve. It's gotten supper hard to turn the crank and I had to stop fishing it. Thanks!

I have one seldom used 5000 model siitting in garage for more than twenty years, it is still very smooth and the line cast out ok but has a high noise sound when shooting out? What could be the problem? Can simply open add some grease fix the sound?

@2ndChanceTackle

5 жыл бұрын

Most likely the oils and grease have evaporated over time. Take the side plate off and spray the gear side and bearing sides of the reel with WD40. That will be a quick way to see if it is just grease that is needed. If it solves the problem, you can do the service as shown in the video. Thanks for asking - Dennis

@Abcd-cb5ty

5 жыл бұрын

2nd Chance Tack Thanks Dennis I will try.

9:18 The 'ferrel" or bushing or shim (black plastic collar part 7080 likely))? Anyways I got one of these reels at a garage sale and the ferrel/bushing is missing. Understandably the reel won't function without that space created by the ferrel. I'm a diy kind of guy and cheap as hell - I priced the ferrel part and its about $10 plus shipping. Any home made solutions - would a stack of washers do the job? or a well carved wine bottle cork lol....thanks for the vids..love them.

@2ndChanceTackle

3 жыл бұрын

The stack of washers may work, but the issue is that the shaft has flat sides that the piece grabs and a circle hole would not hold. That would affect the anti-reverse function. I think you need to find a donor reel or spend the $10 - Dennis

does this reel has a clicking sound? it seems silent all the time while casting, while reeking, while dragging?? i have just purchased one from aftermarket, and don't know if it is missing any internal parts for the clicking sound while dragging the line by a fish

@2ndChanceTackle

3 жыл бұрын

These do not have the clicking associates with a spring driven anti-reverse. These are "silent" A/R systems. Your reel should be fine - Dennis

So,my levelwind reel makes a screeching/scratching sound when i reel in.I never used it once.Actually,i didn't even spool it.Also,my reel doesn't have the "freespool" button.

@2ndChanceTackle

6 жыл бұрын

can you send me a picture of your reel. This seems odd. The screeching is probably lack of lubrication. The free spool is what seems odd. Thank you

@rollothewalker5535

6 жыл бұрын

a picture of the disassembled reel?I can't disassembled it,i'm scared i'll screew it up.This is the reel: www.decathlon.co.uk/reveal-20-lbs-id_8206219.html

Are you available to repair 2 reels? I have 2 6500 c's they look like this one. I got them used and they just seem like they could be spiffed up. Spool button sticks. Handles stick. They just dont seem right anymore. Maybe they need cleaned and some parts replaced. Idk

@2ndChanceTackle

4 жыл бұрын

Yes - I do repair reels by mail as well as for my local customers. Please send a note to my email address - 2ndchancetackle@gmail.com for the details Thanks for asking - Dennis

Thank you for taking the time to make a video on this, very helpful! Is there a good site or company to order replacement reel parts you can suggest? I have 2 Abu Garcia Torno 3003's that need worm gear and paul, and I'm having trouble finding them for this reel in particular.-Jason

@2ndChanceTackle

6 жыл бұрын

Start with Abu Garcia Customer Service 1900 18th Street Spirit Lake, IA 51360 (800) 228-4272 abugarcia@purefishing.com Thanks for asking - Dennis

I like the information and video, a question to you sir or any knowledgeable reel tech/diy, can you replace one of those Rulon drag washers with a carbontex type? Specifically on a BFS iFishband Tendershoot round reel. Any input would be greatly appreciated. Thanks much.

@2ndChanceTackle

Ай бұрын

Most drag washers can be upgraded Carbontex. Just make sure that they are the same size

@abelabner

Ай бұрын

@@2ndChanceTackle Thanks for answering my question!!!!

Hi Denis, would this reel be the same as the Ambassadeaur Six. Mine is black and I think its the 88-0 or 89-0 model.

@2ndChanceTackle

5 жыл бұрын

This reel should be very close to your Ambassadeur 6 and the process for the tune up and service would be the same. If you start and get stuck, you can send me an email at 2ndchancetackle.com and I can help you get back on track if the parts or setup is different - thanks for asking - Dennis

@nickvasile5354

5 жыл бұрын

Thanks Denis! I'll give it a try this weekend. I do have the schematics in case I run into brick wall. Happy Fourth!

I took my reel apart, and a very small copper colored washer fell out, it is round in the center. and round on the outside. would u know where it is supposed to be, thanks

@2ndChanceTackle

3 жыл бұрын

It sounds like it the one at the base of the gear shaft. You can get a schematic of this reel at this link. I am unsure what version you have www.abugarcia.com/pages/abugarcia-reel-schematics Look at part 5189 I think that is the one you are asking about - Dennis

Where can I get a rebuild kit for a 5000?

@2ndChanceTackle

5 жыл бұрын

Start with Abugarcia.com and scroll down to the bottom of the page. You will see a link for parts. Contact them for what you need. An alternate source is ereplacementparts.com. Thanks for asking

I have one 4600 c..small abu ambassador....its old...high speed. But do you know how much they cost...??

@2ndChanceTackle

5 жыл бұрын

The prices fluctuate widely. Best to check a site like EBAY to see what the current price for one in your condition is going for. My guess is anywhere between $30 and $70 for good to very good condition.

Can you tell me where to find the C clip that goes on the handle shaft? I’m finding they discontinued it.

@2ndChanceTackle

11 ай бұрын

Most are. You can generally find a size that will fit in an assortment sold through Amazon or an auto parts store

@fuddlife

11 ай бұрын

@@2ndChanceTackle Thanks for the info and thanks for the video.

where/how do you buy the parts for these older reels? I have this exact reel and I'm working on restoring it (its missing parts) so I am looking for where to buy parts.

@2ndChanceTackle

4 жыл бұрын

The best place to start is abugarcia.com. There is a listing in the Parts section for where you can find the ones you need - Dennis

@theawkwardoutdoorsman8329

4 жыл бұрын

@@2ndChanceTackle Ok thanks! And they carry parts for older models or are the parts the same?

@2ndChanceTackle

4 жыл бұрын

@@theawkwardoutdoorsman8329 You need to know the model and part numbers as all are not interchangeable. You can get the schematic for your reel at the Abugarcia.com site. The schematic will show the part and number. You can then use that to order your parts. - Dennis

@theawkwardoutdoorsman8329

4 жыл бұрын

@@2ndChanceTackle Ok thanks!

Question I have a 5500ser.ambrassordor the reel spins freely both directions wont lock as if the anti reverse is broken what should I do

@2ndChanceTackle

3 жыл бұрын

It sounds like you have a broken anti reverse issue. You need to open up the reel and check to see if those parts are functioning. If they are worn, they willed to be replaced. Dennis

@Cedricasmithsr

3 жыл бұрын

@@2ndChanceTackle ok thx I will I'll touch back

Nice video but it looks like you didn't heck underneath that gear. On many 5500Cs, there is another drag washer that sits on the bottom side of the cog. Easy to miss if you don't know it is there.

@2ndChanceTackle

6 жыл бұрын

Thanks for pointing this out. There is the backing washer. I've missed it I this video. I'm new to recording these and I was rushing to keep the video short. Haste makes waste!. - Dennis

@randy1ization

3 жыл бұрын

is it a very small copper colored washer that is slightly concave?

E clip. I have two older 5600s. They haven't been working at all and I love the feel of them. Watched your videos hoping to take them apart, clean them and maybe see what's wrong. Starting taking the first one apart and the e clip shot across the room and I can't find it. Is this a piece I will have to order from Abu Garcia, or where would you get it from? Thank you!

@2ndChanceTackle

3 жыл бұрын

You can usually get that clip from ereplacementparts.com make sure you put in you reel in the search bar or you will get too many non-matches. If you an't find it online, try a hardware store. They may have one that fits - Dennis

@ThoughtIwasFishin

3 жыл бұрын

Thank you!

@2ndChanceTackle

3 жыл бұрын

You are welcome - please stay safe and stay watching - Dennis

What contaminants are you worried about? Surely not microscopic amounts of reel lube?

@2ndChanceTackle

4 жыл бұрын

The glove is used a a precaution and protection. Many of the reels I service are loaded with grease, dirt, and dried "stuff" including salt and sea, bait and fish left overs. This is particularly true of spinning reels, but I've come to use the glove on all. This one was not, but they are not all like that - Dennis

My Abu drag doesnt work, its an Ambassador, i tighten my drag and its a free spin, is it done?

@2ndChanceTackle

4 жыл бұрын

It sounds like you don't have a drag and that it is done. Another cause could be broken line or debris inside that is keeping the drag from working properly - Dennis

@azman4749

4 жыл бұрын

Buck Nasty, an older abus reel using fiber (?) drag elements. It should not contaminated with grease or oil. Otherwise it will just slip with lighter pull. I always keep my abu c3 drag element free from oil and grease. Some people put grease for smoother drag but for me an abu original is smooth enough without grease. I even increase it drag power simply by polishing the metal pressure plate (three including the top) to mirror finish and inside the main gear that touch drag element using dremel tool and Fabulusture polishing compound.

My reel is a 5500C but the original version without the rounded left side cover. The bearings are not in the spool. How different is this process? Also, even though I've cleaned it and reassembled it per the diagram in the owner's manual the reel remains in free spool when I turn the crank. I can't see the reason for that. Do you have any tips?

@2ndChanceTackle

2 жыл бұрын

Your reel would be in constant free spool because the click ratchet and trip mechanism is probably not installed properly. You need to take the side plate apart again and make sure the click ratchet and jack are set so that the tail of the jack fits in a slot on the click ratchet, which is located under the main gear, when free spool lever is depressed and that turning the handle pushes that part up to reset the pinion gear and allow the spool to crank - Dennis

@larrymor

2 жыл бұрын

@@2ndChanceTackle thank you very much for the reply. I’ve checked the reel several times and it still maids notions. I’ve had it since the seventies and this is the first time this has happened. I’m taking it in to the tackle store tomorrow. Thanks again.

@2ndChanceTackle

2 жыл бұрын

OK. If the reel has been cranking for 50 years, then it could be that a part is finally worn to a point where it has become noisy. - Let me know what you find - Thank you Dennis

hello : best video I have found !! can you please make or have a video home to protect reel like those from saltwater fishing , before use ?? like where to put grease or oil , im just starting to use one of those , thank you from new ( SUBSCRIBER ) :)

@2ndChanceTackle

5 жыл бұрын

Thank you for subscribing. I will add your request to my lit. In the meantime, make sure you wash off the reel with fresh water after each use and use a drying agent like WD40 after each use. The reel should be serviced at the beginning of the season and again around the mid-point. At the end of the season, you should remover the line before storage. There is no reason to keep the line on, and the risk is that the water on the line will corrode the spool and gum up the reel. Thank you for asking - Dennis

@tornadof5thenature109

5 жыл бұрын

thank you , one more thing , I was about to put strike pro line 0.15 on the ambassador 4600 , but some ppls have told me not do this cus I will have tie-ins :( they told me to put 0.36 but I will not get range that I want :( then no idea why I got this reel in the first place :( I have used spinning reels all my life , but to get more range some guys told to get levelwind reel >.

@2ndChanceTackle

5 жыл бұрын

Use what you think is best for you. Try the .15 - I think it will be fine. If you have the trouble that folks say you will, then switch over. Part of the fun is learning what is best, so you need to try different things until you get the set up you want. I don't think that the tie in will be the problem that you think it will. If it is, then switch to the .36 Thanks for watching - Dennis

I have abu c4 that it won't let the line out it lock up

@2ndChanceTackle

Жыл бұрын

It is hard to say what the cause is without opening up the reel. You will need to remove the gear side plate and inspect what the cause may be. It could be as simple as broken line on the spool, or it could be a broken part. If you would like me to serve it, I can. For service and repair information, please send a note to me at 2ndchancetackle@gmail.com

can i know what is the product on the left side of penn grease

@2ndChanceTackle

Жыл бұрын

That is Cal's drag grease. Thanks for asking - Dennis

@chy6288

Жыл бұрын

@@2ndChanceTackle thanks you!

Will the 5500 and the 6000 match frame and side plates

@2ndChanceTackle

3 жыл бұрын

There were a lot of different configurations of side plates for the Ambassadeur reels and many are not interchangeable. I don't know what versions you are asking about, but the probably is that they won't match up

@kelvinmpatterson

3 жыл бұрын

@@2ndChanceTackle 6000c ambassadeur and the 5500c ambassadeur. The side plates look same jus different color. Both are the old ambassadeurs

@kelvinmpatterson

3 жыл бұрын

@@2ndChanceTackle thanks for responding 2nd chance tackle

Este carrete sirve para agua salada?

@2ndChanceTackle

4 жыл бұрын

Sí, el carrete está diseñado para un uso intensivo de agua salada y se basa en una línea trenzada para obtener la fuerza y ​​la capacidad necesarias para la pesca en el océano. - Dennis

Show!!!

@malakairiley8466

3 жыл бұрын

You probably dont give a shit but if you're bored like me during the covid times then you can stream pretty much all the latest movies and series on instaflixxer. Have been streaming with my gf these days :)

@olivernikolai3045

3 жыл бұрын

@Malakai Riley definitely, been using InstaFlixxer for years myself :)

@kharinathanael4849

3 жыл бұрын

@Malakai Riley Yup, been watching on instaflixxer for since november myself :)

@augustusadriel1032

3 жыл бұрын

@Malakai Riley definitely, I've been using InstaFlixxer for since november myself =)

@ariesclark3272

3 жыл бұрын

@Malakai Riley yup, have been using instaflixxer for since november myself =)

Hi Dennis, just curious how much you charge to do this reel? Do you take customers sending you reels?

@2ndChanceTackle

11 ай бұрын

I do service reels by mail...or drop off. Please send a note to my email 2ndchancetackle@gmail.com for service and repair information. Thanks for asking - Dennis

My clicker stopped working....any help? Its a royal express

@2ndChanceTackle

6 жыл бұрын

This will sound like a stupid question. Are you sure you have a clicker on the reel? Many of the Abu bait casters do not have a clicker. I pulled a schematic for the Royal Express and did not see a clicker on that model. If you have a clicker, please send me the model # and I will see if I can help. Most of the time, you will need to remove the non-gear side plate and replace the metal or plastic ring in order to restore the function on those reels that have a broken clicker. - Dennis

@terryyoung7808

6 жыл бұрын

2nd Chance Tackle yes sir im positive, im not sure where to find model #

@darrylvalentine98

3 жыл бұрын

2nd Chance Tackle need a part for last king spinning reel a bail spring where in the world can’t I find almost new reel

Can you add a link to where you bought the part?

@2ndChanceTackle

5 жыл бұрын

You can find the Abu part through this link. There are several sources. I used ereplacementparts.com, but there are several that Abu lists here www.abugarcia.com/AbuGarcia-parts.html

@azman4749

4 жыл бұрын

Dadsoletackle.com and mikereelrepair.com

Where did you order the washer from I have the exact same reel I’m trying to service my self awesome videos

@mattzern3659

3 жыл бұрын

I’m also missing the centrifugal break weight on the end would you happen to know when I can order two ?

@2ndChanceTackle

3 жыл бұрын

You can get these through Smoothdrag.com or Southwesternparts.com or ereplacementparts.com.. I prefer Smoothdrag.com - Dennis

I cant get my handle back on please help , it doesnt seem to want to tighten

@2ndChanceTackle

4 жыл бұрын

Please send me a picture of your problem to my Email - 2ndchancetackle@gmail.com and I will try to help. Dennis

@2ndChanceTackle

4 жыл бұрын

My first guess is that you did not remover the "E" clip on the top of the gear sleeve. I think you just need to remove it and your handle with slip back on easily. Sometime you can pop off the handle without removing the clip, but you can rarely get the handle back on with first removing that clip - Dennis

@ticesine6589

4 жыл бұрын

@@2ndChanceTackle thanks Dennis you 100% right i lost the c clip .

Where do you order the drag washer?

@BubbaNoze

5 жыл бұрын

Get Carbon Fiber (CarbonTex) from Smooth Drag, www.smoothdrag.com/price.html For my 1972 5500c, part no is 7079

@Abcd-cb5ty

5 жыл бұрын

Can I just turn the washer over and use the other side?

@2ndChanceTackle

5 жыл бұрын

That's not recommended. There should be equal wear and pressure on this from top and bottom so flipping it would do little. It should be replaced. - Dennis

My red abu..has a very different drag system....1970's..i guess...

@2ndChanceTackle

5 жыл бұрын

Rey - there are several set ups for these reels. The most significant is the change from the friction anti-reverse to the anti-reverse bearing. The best I can advise is to get the schematic for your reel in order to do the service. You can find the schematic here www.abugarcia.com/AbuGarcia-reel-schematics.html Best wishes - Dennis

@billwalker4836

5 жыл бұрын

@@2ndChanceTackle that's good info to have right there!

What did you charge for all that magic you performed you wizard you?

@2ndChanceTackle

5 жыл бұрын

The basic service with replacement drag washers is about $20. If it is done by mail, then the postage is extra - Dennis

I found one in a river and im trying to get it working.

@2ndChanceTackle

5 жыл бұрын

I will bet you can do it! These reels are tough! Best wishes - Dennis

@joshuahamberg6765

5 жыл бұрын

Thank you buddy

why don't you grease your drag washer?

@2ndChanceTackle

3 жыл бұрын

There are three types of drag washers. Felt, which get oil, fabric, which get grease and hard composite, carbonated or teflon washer, which do not need either. - Dennis

the clarity of your videos are spot on , if you don't mind sharing what camera do you use for your videos... asking for a friend (lol)

@2ndChanceTackle

4 жыл бұрын

I use a very simple Cannon PowerShot A2300 HD pocket camera with 16 mega pixel clarity.

That's a nice big scratch you put on that gear where the drag washer lays. You should use something that wont scratch the gear and make the washer want to grab onto the gear.

@2ndChanceTackle

3 жыл бұрын

Hmm - I will need to go back and see then adjust my technique. Best wishes - Dennis

Terminology is all wrong. What you call the pinion is the drive shat. The pinion is the small gear in the middle. Also you said you were going to lubricate the worm gear but you didn’t. Lastly, you left a lot of greasy junk on the reel when you reassembled it.

@2ndChanceTackle

4 жыл бұрын

Looks like I need to work on my nomenclature. I get mixed up easily calling springs screws, screws nuts and yokes and jacks collars and levers. No excuses. Hopefully folks can work the process in spite of my ability to err in naming the pieces and parts. This is one of my earlier videos. I am trying to get it right, but still proving human. Dennis

so you don't clean the reel you just add grease and oil wow hope you don't charge for this

@brunomahle1618

4 жыл бұрын

Eggzactlee! Chronic hackery!

@brunomahle1618

4 жыл бұрын

@Badass Frank Henry He's not helping anyone,...maybe a what not to do vid...

Your video are good information, but you need to center your video watching your tool tray isn't important

@2ndChanceTackle

3 жыл бұрын

Yes, you are right. The earlier videos in my series were limited by the camera. I have upgraded it and am better able to do close ups now. My hands and arms still get in the way. I am working on that - Dennis

GEEEZ ANOTHER VID OF AN EXPERT WHO DOESNT EXPLAIN EACH STEP ... knowledgeable? YES good educational vid? NO.. knows how to do it but is going through it with normal motions but doesn’t explain it well .. how much grease? Try to avoid getting your greasy hands all over the fishing line .. The springs and clips have certain ways they go and we’ll never know... but otherwise was a decent vid ..

What a hack! 20 years servicing reels? People pay for that? This must be a joke vid...had me laughing. New teflon drag washer with the dirty rust pitted top drag plate.

If this is what you call a service you should be ashamed of yourself!!!!