2024 New invention for cars never made before 👇👇 kzread.info/dash/bejne/aa6GyK-thdbFdJc.htmlsi=VkNr9-a4qE7uYoXH

@kobiroar4221

Жыл бұрын

Ideas ok but what about the different clearances on other vehicles, no thanks

@wendellsnowden4902

Жыл бұрын

Yeah I just love the part where you do not show how you get the Bars Under the tires what's up with that

@jimmybare3026

Жыл бұрын

@@wendellsnowden4902 I personally would drive on it then proceed to change my fluids, starter, rear seal or whatever.

@jimmybare3026

Жыл бұрын

I would add to your design a plate on the bottom with a lip that would prevent the jack from jumping out from under it because the nature of these Jack's is to travel backyards as you're jacking the car up. Your invention is really useful for doing a ton of work underneath a car because it gets the tires out of the way yet is much safer than removing the tires in case somehow it were to fall. Thanks for posting!

@jimmybare3026

Жыл бұрын

@@kobiroar4221 I thought the same until realizing this is why the barstock is so long.

Nice welding, but maybe there's a reason why these are not commonly sold . Huge risk involved .

I would definitely say test it on different weight cars so you know it’s tension strength. This is a great build but I’d like to know it’s weight capacity.

@gedman9527

Жыл бұрын

Looks dangerous false sense of security , fixed axle stands one at a time safety first

@hannesraitolehto5138

4 ай бұрын

😄😄😁😁

@jorgemora7190

4 ай бұрын

Wow is great thakns for time you are the best 👍🏻

@paul-57

3 ай бұрын

@@gedman9527 . You are right that you should use axle stands but this is a great way to lift the car to put the axle stands in before you get under the car they make hoists that lift the whole car on four arms and they are safe. This would more than likely easily hold more than the jack could lift. If anything it is over engineered. The car probably weighs around 2,000kg which means 500kg per side on the stand, not really much for the size of the steel used.

Nice, but where was the clip of the car driving up onto the round stock? While it was balanced on the jack, the round bars weren't on the ground.

@ulrichwillems6072

18 күн бұрын

I 100% agree with you on that...that's a red flag!!

@howtodoitdude1662

Күн бұрын

The same way, as when he drove off of it.

@Spiritof_76

Күн бұрын

@@howtodoitdude1662 Please explain further. I can jump down from places I can't jump onto.

Nice first attempt. But it would be more useful for cars that can't move under own power if the 4 rods were wider, and are inserted into receivers. This way you position it under the car, insert the 4 rods front and aft of tires, and lift. Lower the car elsewhere or when done, pull out 4 rods, remove the assembly and jack.

I wouldn’t trust it with out blocks under the wheels, so if you have to use blocks why not just use ramps. It’ll be easy to weld some drop down stabilizing legs on it though , maybe some straps over the tires to fasten it down .. Pretty good idea 🤙

@dave5176

7 ай бұрын

I can't use the ramps sometimes because they get in the way when putting jacks under. And my Corvette won't clear the ramps. And there's only one place where you can put the ramps on, so lifting this way makes sense. And bricks or two by fours are blocks.

@dand3975

5 ай бұрын

That steel rig will be in the way of placing jack stands under the lower controll arms, also It looks awkward to drive car on a d off of the dowel bars.

Definitely would have to get jackstands under it for support in case the hydraulic jack failed.

@krisg822

8 ай бұрын

or the car decided to roll in any direction

Those welds at the end rods are impressive!

That's very good for vehicle's without a central jacking point, and yes you have to use jack stands.

Excellent idea for lifting a car evenly to fit the axle stands. Very nice welding.

@DIY.Invented

3 ай бұрын

Thank you 🙏

Great idea, will be making my own. Will add a couple of threaded stantions like harbour freight to lift rear axle. Maybe insert heavy wall square tubing or solid square bar inside lifting beam for more center strength, weld in with rosette welds. Thanks again!

@RGIIIBOXING

3 ай бұрын

I DON'T GET IT" IT TAKES UP WORKING SPACE...NOT TO MENTION...HE EDITED OUT THAT HE HAD TO DRIVE THE CAR ON TOP OF THE RODS...ITS VERY UNSAFE ..NOT TO MENTION THATS WHAT A 2 TON JACK" I GOT A 3 TON..I USE FOR MY TAHOE" THEN I PUSH A CAR WHEEL UNDER THE TIRE AND LET IT BACK DOWN ...THEN TO THE OTHER SIDE" THAT SET UP IS GOING NOWHERE" HIS SET UP.... THAT A DEATH TRAP.....☑️

Looks dangerous. The car could roll right off😳

@FahQMan

Жыл бұрын

Chock the wheels 😳

@jlrockafella

Жыл бұрын

😂, wheel chucks ?

@FahQMan

Жыл бұрын

@@jlrockafella yeah a wheel chock. Chock the wheels that are on the opposite side of the wheels being lifted. And if you think i misspelled chock then I suggest you get to googling that there mister. Makin sur dat I ain’t mispeled et

@richardcaruso002

Жыл бұрын

The weight of the car keeps the wheels settled between the pipes.

@isaiasmigueltube

Жыл бұрын

Totally agree. Too dangerous for my taste.

This is a simple and interesting device, but it is only suitable for cars with a huge ground clearance. Most modern cars are not compatible with it. The device will only work with the back where there is a void. In front, there is the suspension, the engine crankcase, and its protection, there is barely 130 mm clear. In addition, a square pipe for heavy cars needs to be reinforced with scarves from the bottom to ensure sufficient rigidity. Because even in the video you can see how the pipe bends. After 10 lifts, it will take the shape of a hemisphere.

Absolutely brilliant well done mate cheers

Really impressive tool, I will build one similar myself, but have ideas for modifications to where one could use it for cars as well concerning ground clearances to bottom of vehicle

thats a good idea and well built. i would change piece in middle and make it go in the hole on the jack after removing the lift disc. but over all this is awesome

Sure is robust....and an awesome tool.... Thanks

That's great! But how will that help rotate the tires? Or do a brake job? 😳

@avalos2047

Жыл бұрын

Put jack stands under the frame of the car.

@lanpartyanimal5215

Жыл бұрын

1) It will allow you get the car higher off the ground because the jack starts lifting the car at a lower point in the jack's range. 2) It keeps you from damaging the side seam on a unibody chassis trying to lift it. 3) Once you have it at the required height use jack stands or wood cribbing to support it.

@raulmolina4680

Жыл бұрын

Nope it actually makes no sense to me, you can change the oil if the jack is in the way, can't take tires off to rotate or change brakes.

Great idea. Thanks for sharing that

Definitely need to get a lower profile and a better jack with a lower profile jack the round bars will all sit on the ground and I would put a bigger round pipe in the center for the jack. Yes I would Definitely use hevy duty jack stands

Excellent time saver. Great video. Thank you!

@DIY.Invented

3 ай бұрын

Thank you i

Великолепная идея и отличное исполнение! Меня оно навело на мысль для универсализации под разные базы и не только под колеса.. Огромная благодарность и удачных идей в будущем!🤝 Теперь я знаю, что и как сделать в гараж под джип и легковушку!🤝

@user-qi8do5sp7o

Жыл бұрын

А как он этот швеллер закатил под два колеса? Только самому наезжать! У меня в Субару за ДВС по центру машины есть жесткий поддомкратник величиной с ладонь. Я 20 лет им пользуюсь. Думаю, что у некоторых а/м тоже есть.

Great idea for uniformity of lift. I also enjoy repairing my own vehicle. Vetri South Africa 🙏🇿🇦🙏

Could use a little more distance between the tire bars.

You left out the part where you had to back the car onto it to use it...

@james10739

Жыл бұрын

And what are you doing I hope not breaks or anything with the wheels

@rickyarger1169

Ай бұрын

And that would be a problem ...how?

@rickyarger1169

Ай бұрын

If you are doing something like the transmission would be great...would make extra clearance...

I’m retired welder. Love mug welding! Squirty Squirty! Sweet idea!

Really good idea and awesome creating! Nice job! :)

@SlingSlangSkrrt.

Жыл бұрын

Why tho?

I wouldn’t trust my life with that contraption! A couple of decent ramps, and couple of jack stands for redundancy are more than sufficient and you’ll get more space under the car.

Just use subframe mounts as jack points instead? What do you do when it's up in the air? You'd still want something other than a jack to hold it up while you get under the car. A pair of ramps would be even faster to use and easier to store. Nice metal work but not sure what problem it's solving!

thatsa great tool and could be modified for use on light duty trucks.

Espectacular genio muy bueno me voy hacer 👍

I love it! I want one! The sad part is I wouldn't be able to pick it up to get it on the jack. Bad back. 😢

This might be good for pick up trucks if you don't have long reach floor jack. Once up, drop on jack stand...

Awesome idea. My truck is lifted and it’s a pain in the ass to Jack it up. This is perfect. 👍👍👍👍👍👍👍👍

I can't figure out when you would use this when 2 jackstands would suffice. Of course it is cool to make things I do it all of the time.

This would make it easier to place jack-stands. Keep innovating! Nice

Very nice Welds!

A fun project and useful for certain applications. I always wondered if someone makes air-rams to mount permanently under a vehicle to lift either of the four wheels for a quick tire change like in the Indy 500 pits? Be nice if you could just hook up to a small compressor, lift either of the 4 off the ground, and it would always be there underneath for when & if you get a flat tire in the dark and/or during shitty weather.

@Michael-DeltaWolf

Жыл бұрын

No in Indy you can change tires this you can't

@repairfreak

Жыл бұрын

@@Michael-DeltaWolf I’m sure with some mechanical engineering, electrical and metal fab skills one could custom build a system for their vehicle. I have the electronics and metalwork skills, just not the mechanical or hydraulic skills needed.

@Michael-DeltaWolf

Жыл бұрын

@@repairfreak I'm not saying it's not a good product it's just is missing something . You know like a the way a real car lift works but a mini version . Like instead of picking up the whole car you could pick up one ends like the front or the back and from the side's to.

@andrewwmacfadyen6958

7 ай бұрын

Back in the day some British cars were fitted with 4 built in hydraulic jacks that were fed of an electrically driven pump. The driver could just reach down and all 4 wheels were jacked clear of the ground. Google Smiths Jackall

@NickPerry

7 ай бұрын

I think there was a taxi driver in France that actually did this on his Peugeot 406.

Clever design. Has a few practical and safety draw backs. Keep at it. Work safely. Not exactly sure what work you would use it for. Side access wheel dolleys would be more practical.

Ух ты! Классная идея!

The steel car lifting bar looks great. But your Center is not strong Enough! You will lift a couple of times then it will collapse in the center. Please do not risk your own life.

Excellent job

Bro amazing 👏

I see a business opportunity here. Do the necessaries and see what happens. Brilliant idea!

I love it! This is brilliant. Ignore the negative comments.

I need to build one of those for a 3-point hitch to move my project cars around. Great idea! Just add a ratchet strap over each tire.

Or you could just jack it up with just the jack and accomplish the same exact thing without having a giant heavy metal bar taking up all kinds of room in the shop

@patthesoundguy

Жыл бұрын

Yeah that thing is great until you need to take the wheels off. Not much you do on the front end of a car with the wheels still on.

@neoskater420

Жыл бұрын

This is true yet you still people using things to roll on to to raise there car up higher to get underneath to work on your logic is a weird one as removing the tires would be common sense to not have the bar yet here we are having to explain to you like a child why you would use it. Guess you have not worked on enough vehicles in your day yet youngster

@joe00camaross

Жыл бұрын

It actually would work great when doing suspension work and car needs to be on wheels to torque everything down.

@dirkfrazier9779

Жыл бұрын

I didn't even watch the video, saw the first question and had to reply, I do it when I need to, just put on (axle) solid jack stands and let out the clutch slow, you can go thru the gears, brake, carefully because your spinning wheels have a lot of inertia in them. Didn't want you to go thru the garage wall, greenhorn. No question is stupid when still a little wet behind the ears

@fenflyer

Жыл бұрын

🤣

Very cool idea! I believe I’ll make one

@1gerard47

Жыл бұрын

For what reason,you have the tool already to lift the car ,it's called a jack.

This is a awesome job you have done here. Just a little suggestion,maybe add a couple tabs on the round bars to front and back to put a ratchet strap on. Maybe on a slight up angle, just a thought.

One improvement I would do is add some gussets from back of wheel to about 3/4 of the way to the lift point. That would help on the deflection as you lift.

What is the brand of that blade, and can it be used on a regular chop saw such as a Rigid 14" chop saw? I like how it doesn't put off a ton of sparks and all the dust that comes from typical chop saw blades.

@josephvella3688

Жыл бұрын

Had to be a slower speed a d higher torque than a regular miter chop saw.

@mikewarpula911

Жыл бұрын

No u can't chop saws turn away to fast.watch how slow that saw turns.

@23steph13

Жыл бұрын

Mine won't cut that good

@fixitallpaul4847

Жыл бұрын

That is an evolution saw with an evolution blade. I have the saw and like it but use diablo blades. Far superior than the evolution blade.

@23steph13

Жыл бұрын

Lol I just ordered a evolution 66t

What if you have to take the tires off?

@mexicanic4976

Жыл бұрын

You set the vehicle on jack stands as you should to begin with lol I think this device is intended to lift the vehicle at one rather than using the frame 👍

Other than an oil change, what can you do with this contraption?

Lift the car to lift the car....I'll pass.

Love the idea, so why no just make it jack up both side but make it catch the shock or the axel or some other point that succure enough to lift both side. Your fab work was very impressive. Maybe just change your point of contact. Then you won't have to brive the vehicle over it and you could service everything under the vehicle without to hack up one side at a time!! Just my opinion brother!! Over all tho, great fab work!!

If you have a live axle rear end, just put the jack under the diff housing.

Not having the tools to build it i would BUY one of those jack systems….brilliant when you need to get under your whole car, just add a couple of jack stands and work in total secure comfort1👍👍👍👍

Love it where can I buy it

awesome idea !

Me gusta la idea👍👍👍

@DIY.Invented

Жыл бұрын

Thanks

It's nice, but can you just jack on the center of the subframe to lift the front up?

Nice job 😊

This is nothing new you can actually buy them.. But to see an independent man make one brilliant. Make sure you use support (jack stands)👍🏿

@marvinristo1566

Жыл бұрын

Where can you buy them?

Finally a DIY video that is actually run a bead and not do the tack-tack-tack welds.

@meatballmagoo6134

Жыл бұрын

It's heavy duty

@fixitallpaul4847

Жыл бұрын

Those tack tack tack welds are mostly editing to make it look that way. The Fabrication Series did a video about this

@meatballmagoo6134

Жыл бұрын

I are a welder 2

@thenorthernhandyman

Жыл бұрын

@@fixitallpaul4847 those tack tack tack welds are just because they cant weld.

Well done!

Great job on it like it

Good idea ... just reinforce the center part it's bending alot..

@jpgohard

Жыл бұрын

I saw that too. Wondered if I was alone in that...

This thing gives me anxiety but safety stands can help, also this contraption is for tall vehicles not low clearance ground cars, overall nice time saver!

Great job , s that wheel under pressure?

I don't know, It looks great but I would rather use the materials to make some car ramps at home...

@Rickmakes

Жыл бұрын

I was thinking this doesn't seem to have any advantage over ramps but maybe I am missing something.

Useful build to get one end of vehicle up on jack stands.

great work

Definately a nice idea

This is as safe as the old style bumper jacks.

@richardcaruso002

Жыл бұрын

Much more so

@gedman9527

Жыл бұрын

Wouldn't get me under it

Genius!

I was going to buy air powered since they use this idea to lift buses. This is s good idea of jacking it up to wood cribbing stands

Good job mate 👍👍👍

would be a lot better used with a low clearance jack to bring down the height of it, great for transverse engines where they either have no jack point at the front or its off set due to the engine, g'box layout

One question!! What good does this do. You can't change the tire. You can't service the wheels or breakers !! Very nice fab work for sure , just don't get the point!! Other than that, great job!!!

Cool idea. I like it. He made it because he could. Not everyone has killer welding skills. About the only thing I would have done differently is make it adjustable to work on multiple vehicles. Regardless, it's bitchen!

Se o carro mexer pra frente um pouco ele cai, ficou perigoso, se fizer as barras um pouco mais distantes para abracar melhor o pneu e deixar o centro de gravidade um pouco mais baixo vai ficar perfeito! Parabens pela idéia criativa!!!!

très pratique lorsque tu veux retirer les roues arrières 😄😄😄

@MAVA1686

Жыл бұрын

i was thinking what kind of job he Is going to do in the car .... Fuel tank???? i dont see to much advantage.

@MAVA1686

Жыл бұрын

estaba pensando que trabajo le va realizar al auto.... no veo mucha ventaja en levantarlo así.... tal vez trabajo con el escape o el tanque de la gasolina ( y sería incómodo) ...

I’d like to see something similar for raising large tires to install on lugs..I have a truck with 20 in wheels and 35 tires and I’m older now those things are heavy…maybe something exist for that?

brilliant video 😎 need more than 2 ton jack 🤔 I only jack up my car when I'm fixing something,so usually have to remove wheel

Great! Where can I buy one?

No metal prep prior to welding; just saying Nice idea, especially for pre-jacking vehicle prior to installing jack stands on frame so as to work on brakes etc

@Golgi-Gyges

Жыл бұрын

Quick and easy ideas to make YT money

Great. Job. Thanks for Tip I am. Going Make one at My. Welding Shop 🙏🇨🇦

Wouldn't need that often, could just use the jack by itself. That would come in handy for vans with the twin I- Beams though. You can't lift them up dead center in the front.

I see this as a great time saving idea. I've driven vehicles up those cheap stamped sheet metal ramps and i've actually seen one collapse after the vehicle was up on both ramps. This looks well built. There are some things I would do differently but it would have to be made with a few different vehicles in mind. Lifting a vehicle by the tires like this eliminates the suspension sag. For those who point out that it is useless because the tires can't be removed for brake service or it is in the way for an oil change must be working under vehicles without using jack stands. I really hope that is not the case for that is extremely absent minded.🙄 This device allows a person to drive their car onto the rods, apply the parking brake, chock the wheels that are not being lifted, raise both sides of the car at the same time to the required height, install appropriate jack stands to both sides of the car without having to reposition the jack, lower the car onto the jack stands, and then remove the jack and lifting device. You are now uninhibited by the jack and lifting device.

@peterwiremuormsby9383

Жыл бұрын

How you going to get the axle stands under the axle with that thing in the way?

@markmccoy8304

Жыл бұрын

@@peterwiremuormsby9383 Unless the vehicle has a solid axle housing on the front, the jack stands should be placed under the frame rails where they support the vehicle more securely than under a control arm. I'm sure you can find many reasons why you think it's a bad idea and maybe it is a bad idea for you, but maybe it's a great idea for others. Can you not find any possibility where this device could be helpful? Keep in mind that if you built one, you would design it to suit your application.

@peterwiremuormsby9383

Жыл бұрын

@@markmccoy8304 sorry m8, it wouldn't be any good to me, l have a 57 Chev.

Good for getting the whole front up so you know the jackstands will have the same height when you put them under.

looks impressive but if you can i would use good quality ramps, i found they work better and safer than anything else i have use except for 12 in blocks with 4x4 on top of them so the blocks dont split,

Great idea no doubt.. Have a few ideas to possibly improve upon the original design: 1. Make a sort of stay (or a small cutout) for the under side of the tool to ensure its exactly centered on the jack 2. Make the rods under the wheels roll. Meaning the Thinner pieces under the tires actually spin with the speed of the tire. Sort of like a dyna setup 3. Possibly make the lifting mechanism lift from the rear-end vs. Lifting from wheels Therfore freeing up the wheels for tire work/, doing brakes, etc

@joedogmckeel

9 ай бұрын

On #3. He stated don't crawl under the vehicle with just this lifting it, meaning, USE JACK STANDS! If you have it on the jack stands you can drop it out and roll it out of the way. On #2 I see what you mean but if they roll the car will push it as it tries to roll on.

@justinsevers329

7 ай бұрын

Cars weight is also not identical on both sides of center as well so you need a decent amount of strength from the middle centering piece to insure it doesn’t crack or break cause the right side wants to come up easier than the left

Nice build. Thank you for sharing your video.

This is a killer tool for sure. Could I make one from aluminum to save weight and have some sort of contraction for easy garage storage ???? Thanks

Have you got a sizes list please any one cheers

Can you use this to work on front brakes or suspension? Seems not

@richardcaruso002

Жыл бұрын

That's not what it's for.....

Good idea but what about a non running vehicle? Hard to get over those large round rod.

@MAVA1686

Жыл бұрын

push It ....

@MAVA1686

Жыл бұрын

joke... good point... specially a heavy one.

I hope my mechanic has one of these.

The reason I Jack the car up and put Jack stands is so I can roll around under the car without having a big long piece of tubing stopping me in my tracks. I honestly can’t think of a reason why this would make anything easier for me. Maybe I’m just slow and haven’t thought deep enough. Nice job making it,and if it works for you that’s all that matters.

Super