ABAQUS #1: A Basic Introduction
This is a basic introduction for structural FEM modelling using the popular software abaqus. In this video the basics are covered including creating and analyzing a three dimensional beam using solid elements. The viewing of results (including showing how to increase the viewport's font size) and a method to export it to excel is also shown.
Пікірлер: 171
Thank you! You explain it step by step very clearly. Will study all your uploaded videos and looking forward for the next one! Thank you so much!
This video brought everything about Abaqus to my desk.
Thank you for making this video! It was extremely helpful in getting started with Abaqus!
Awesome content, my friend. Had put down ABAQUS for a few years and needed to jump back in. This video was really clutch for me. Cheers!
Thank you so much!! I could not have started Abaqus without this vdo.. Please do some more like this.
After having used Ansys, Solidworks, and Nastran, I would say Abaqus has been the most difficult for me so far. Thank you for the tutorial!
@marambiosisimo
2 жыл бұрын
wow which one would you recommend the most in your analysis experience?
Great Explanation.....keep on uploading more videos......it was very helpful 👍👍👍
I appreciate you for creating such a good tutorial.
Loved the video, thank you so much for the clear tutorial :D
Awesome video! thanks for sharing your knowledge
Hi TM, Thank you for the excellent ABACUS tutorials! Your explanations are really clear and beginner friendly. It would be great if you could make at least one more ABACUS tutorial about setting up an acoustic modelling from scratch. I know that Abacus can simulate acoustics, and also acoustic-structure interactions. The only problem is that I could not find any useful tutorial on KZread, or elsewhere about this. Thanks
Could you do a video on analyzing moment curvature of a composite beam? It would be really helpfull to understand how to model the interface interaction between studs (shear connectors), steel and concrete.
really good explanation thanks for the lecture
very detailed vedio and almost everything was there for a starting tutorial. Thanks mate.
@speechoftheworldsgreatests4768
3 жыл бұрын
Hi this company works in the field of industrial analysis and simulation design. We offer a library of materials for Abaqus with 1700 items in various categories Visit our site: en.banumusagr.com/shop/matlib-for-abaqus/
This video was very helpful, your are absolutely awesome yourself bro 👍👍👍
Thanks! Very good details towards the end,
What a great video! Thank you, fam!
Thank you for this lesson!
THANK YOU. YOU HELPED ME LEARN SOMETHING
Excellent tutorial! Thanks for sharing!
thank you for this very informative video
Well explained video.. good for beginners!! Thank u..
thank you very much for the lecture
Thank u. This tutorial helped me very much.
It's excelent! Thank you
thank you for your contribution to society
Absolutely fantastic, thank you
@jamesjumaramba9089
2 жыл бұрын
I am a beginner. Infact it's my first time but i have learned a lot already
Very helpful, thank you. Like given!! And subscribed
Thank you very much, very interesting !!
really helpful for new students for introduction
Thank you very much! So helpful
very helpful video. could you upload videos based on impact too? thankyou
This was a nice introduction, thank you!
Dude, thank you SO MUCH!
@TMsChannels
4 жыл бұрын
Glad I could help!
Thank for the useful video
Really amazing tutorial. could you please share more videos on behalf of biomaterial.. Thank you So much
Thank you !! video is really helpful
Very helpful, thank you.
real helpful vdo... plz do upload more vdos....
Well done man!
That is a really helpful video thank u so much brooo
your video was wonderful.. thanks for that sir
That is a really helpful video. Could you upload more videos. Such detailed videos on Abaqus are rare on youtube
@gaganui5041
4 жыл бұрын
hey sis can you help me in abaqus😔
@gaganui5041
3 жыл бұрын
@@abaqusfem ok bhai 👍
@gaganui5041
3 жыл бұрын
@UCqnaiVg1YHF2NjvR-w8lBAA dekhi Bhai mene aapki videos subscribe b kiya hai aapka channel ..Mera project hai abaqus mein aur muje new abaqus krna hai download kyunki old meinbahut problem aa RHA hai...
@abaqusfem
3 жыл бұрын
@@gaganui5041 for online training and projects in ABAQUS contact bindeshchouhan@gmail.com, All problems in modelling and analysis contact me
@ashutosh4044
3 жыл бұрын
@@abaqusfem Could please help me to know total number of nodes and elements in the meshed component ?
does anyone know how to model Mr dampers in abaqus?
your video is awesome! thank you very much!
how i make reinforced concrete beam column joint in abaqus ?
Really great video ! Thank you for your help
@dhirenps
2 жыл бұрын
Hey, do you need customized tutorial just for you? If you do, please Email at learnsharewithdp [at] gmail [dot] com.
Sir please upload some tutorial related to crushable foam.
Thank you very much
I want to estimate the number of cycles/ stress intensity factors SIF and the corresponding crack extension rate to establish paris law for the given material under uniaxial loading. The sample has and edge crack (with symmetry boundary conditions) and a notch (hole) right to the crack edge. Load is 350N. Young’s modulus for PMMA (Acrylic) of 2.8 GPa (406.1 ksi), and a Poisson’s ratio of 0.34.
Hello, Thanks for this video...can you please upload a video on complex eigenvalue analysis
so much interesting for beginners as me
Thanks a lot, very interesting
can you explain how can i apply same load on five different points of a 100 mm long plate ? each load has to be applied after a gap of 30 seconds and each load has to be applied for about 15 sec
Thank you very much for this video. Is super well explained and really helped with my dissertation
@timothyoluchiri4799
24 күн бұрын
Ths video is quite educative.I have obtained vey useful information about Abacus.Can Abacus assist one to check on structural integrity of a building just before construction.
Really nice!
how to design 6 layers of soil interaction under pit foundation
I have a question, how can we get the angular displacement?
Great intro tutorial.
Awesome Tutorial
Hello there! Want more videos like this. From the beginning. Also, I couldn't find 2,3,4,5 part of Abaqus
Nice introductory video
Good video, thank you!
sir thanks ,please do a one video on dimensions making and units making
thank you very mụch
do you make video about roller bearings?
This is extremely helpful!
Good Job
Thank you, legend!
Please, does anybody know how to use abaqus on Rc slab and frp?
hiii friend can you upload more video for r.c. ssb and how apply frp plate.....
This video is really helpful. Could you please upload some videos related to composite steel and concrete column. thank you.
@speechoftheworldsgreatests4768
3 жыл бұрын
en.banumusagr.com/failure-criteria-larc05/ and en.banumusagr.com/matlib-plugin/ and en.banumusagr.com/design-and-manufacture-of-composite-parts/
I want to do a spot welding simulation can you help me
nice video it is very helpful
Really good video
Very useful.
AWESOME VIDEO
Thanks for the video and explanation. Can I use ABAQUS for dynamic load? like simulating triaxial test for the soil?
@speechoftheworldsgreatests4768
3 жыл бұрын
Hi this company works in the field of industrial analysis and simulation design. We offer a library of materials for Abaqus with 1700 items in various categories Visit our site: en.banumusagr.com/shop/matlib-for-abaqus/
how would i add rebars to it if i wanted?
Hey! Great video! But I couldn't copy paste my data. My Excel says Excel cannot paste. And I tried to paste it else where, but the copy wasn't right :/ Expecting a reply!
Hi, can you do a tutorial on RC beam/column wrapped by FRP sheets? Really glad if you do so . Thank you
@speechoftheworldsgreatests4768
3 жыл бұрын
Hi this company works in the field of industrial analysis and simulation design. We offer a library of materials for Abaqus with 1700 items in various categories Visit our site: en.banumusagr.com/shop/matlib-for-abaqus/
شكرا لك على الشرح
please having problem copy and pasting to excel
Can we get final analysis pdf report as same we get with ansys software
Can you help with pile soil interaction using abaqus?
@TMsChannels
7 жыл бұрын
Hi, to be honest I have never done interaction in abaqus. I believe you may be more successful with the abaqus documentation and published papers?
Thank you for this beautiful and well-structured lecture. This training has taken me to a level in understanding Abaqus. However, l working on composite material, please can l be trained or received something like this to train myself?
@dhirenps
2 жыл бұрын
Hey, do you need customized tutorial just for you? If you do, please Email at learnsharewithdp [at] gmail [dot] com.
can I simulate optical fiber by this program?
Thank you
i didnt have parts.. idont know way...pleas help me?
good explanation for abaqus beginners. If possible please share us any PDF materials and also many more videos on this CAE software sir....thank you.
@speechoftheworldsgreatests4768
3 жыл бұрын
Hi this company works in the field of industrial analysis and simulation design. We offer a library of materials for Abaqus with 1700 items in various categories Visit our site: en.banumusagr.com/shop/matlib-for-abaqus/
deflection values in which form
thank you for your help I want to make simulation for high performance concrete but i dont know what is the parameters that i need it to make simulation to HPC , Can you explain it to me ?
@abaqusfem
3 жыл бұрын
for online training and projects in ABAQUS contact bindeshchouhan@gmail.com, All problems in modelling and analysis contact me
thanx boss. It was really helpful
@dhirenps
2 жыл бұрын
Hey, do you need customized tutorial just for you? If you do, please Email at learnsharewithdp [at] gmail [dot] com.
Hi, does anybody know hot to adjust custom_v6 file for abaqus 2019 to apply the floating license? I have 3 port@ licenses to set and I put them under the flexnet server type with "serv1;serv2;serv3" pattern but abaqus notices only serv1
ERROR in job messaging system: Error in connection to analysis? what should i do
@newayabebaw9579
3 жыл бұрын
do you solve it by now? if you do, please tell me how? I encounter the problem like as you stated
Sir can you explain use of CSTATUS and CSTRESS
Hello I try to simulate a coated substrate, can you help me?
THANK YOUUU
thans is very helpful
bester Mann top content weiter so