Best Taxier 2023🤣. On a real note great video. Helped out a ton!

I swear ive been trying for 3 hours and your video helped so much thxxx

I really like the way you present your videos - better than a bunch of regular streamers in my opinion and I think you said you’re ex ATC which brings an interesting perspective - more please! :)

@gazzis

2 жыл бұрын

Thanks for your comment Tim, I've actually flown a bit too privately which I didn't mention (I think quite a few air traffickers do). Regarding more videos, I wish I had the time!

Not all heroes wear capes. What an amazing tutorial subbed!!!

Am only halfway through your video and omg I have learnt so much. I can see myself watching it over and over again. Awesome job ... I will deffo use the feature that speeds up the Adirs alignment.

Supergreat Tutorial! Hope you do more! :) Thanks, David, SWE.

Excellent video. Just what I was looking for. Thank you very much.

Hello, Wonderful tutorial. I'm long time Sim Pilot from MSFS DOS v., I was off 10 years from sim. However, FS 2020 with the realism is jut above the blue sky with the FlyByWire Experiment program to flying aircraft and SimBrief OFP is WOW. THE MCDU is was totally new to me. However, I managed the SID, STAR, CROUSING, APPROCHING, but I had problem with the LANDING. In your tutorial, you ringed the bell for me what have to do before reach the glideslope to make safe landing. Thank you for the nice job. Safe flights...👍👍 5*

Best tutorial out there, great stuff thanks.

I appreciate you, sir. This video helped me a lot! very detailed and informative. Will watch this religiously till its stuck in my head. Cheers.

I've been waiting for this tutorial for a long time sooo glad I found it.. this will transform my flying up till now I've kept to the prop aircraft now I'll hit the big boys... you got a sub from me hope for more, good man. Thanks for the effort you put into this video.

Great video, extremely helpful thank you. 41:59 "cabin oxygen comes in handy" lmao it sure does haha, great informative video cheers.

I enjoyed the vod, thanks =)

Well done.Filled in some blanks that I wasn’t sure of.Subbed.

Really enjoyable and informative! Thank You 👍🙏🏻👨‍✈️✈️

many thanks for the realy good explainations and hints of what you are doing and why 👍 One of the best Tutorials of the A32NX out there

@gazzis

2 жыл бұрын

Thanks for your comment, I really appreciate it.

Just finished the video, brilliant tutorial! Well presented and you explained everything so clearly. I've jotted some notes down from the video and will keep practicing my flights, thank you.

@gazzis

Жыл бұрын

Thanks. I know the A32NX has been updated several times since I made this but hopefully it’s still relevant.

Thanks very much for making this👍

Excellent tutorial. Thank you very much

Thanks very much. Very well presented tutorial.

Great video thanks

Nice tutorial thanks

really helpful thanks

I love you thanks

Comparable to some professionals here on yt. First vid. First Hit. To newbies more explanation would fit. All in all satisfactory vid. Good explenation at all compared to some entertainment wannebees here in yt.

Great video! You can actually use the FlyPad to calculate your decent, very useful!

@jamalhijawy215

Жыл бұрын

ALSO I THINK ITS NOT WORK PERFECTLY

Super

Great video! One thing, I don't ever have a W/B option

Hey, my navigation does not change like yours did at 1:16:01 and various times throughout. Mine remains on "BPK" - resulting in my distance actually increasing through 300 and 400 rather than decreasing as yours did in the video. Any reason why my nav stays on BPK and doesn't change as I go through waypoints?

@gazzis

Жыл бұрын

Did you resolve?

@OfficialAmazePlays

Жыл бұрын

@@gazzis No, still not sure why it does it...

Thank you 💓 you help me so much (For me: 1:16:20)

Hello, I installed the A32NX plane and there is no reaction when lowering the height, where is the problem??

Further to reply below another change is that PAX are now loaded via the flypad in GROUND>PAYLOAD, not via Weights/Balance in the MCDU MENU.

Hello, I love and I freak out your videos. They help me a lot. Suige so, only as you know. 🤩 But I have a problem. And it is that I am learning to configure the pan of flight in the MCDU, but when arriving at the parter of "Init". I don't get the option to auto fill with the "Init request" option. In fact, I get the whole screen laid out differently. I don't know what to do. I have tried with the 3 versions of fly by wire, the stable one and the other two. I assume srra because it has been updated since the tutorial. What do I have to do to avoid having to complete it by hand? Thank you very much 😊!

@gazzis

Жыл бұрын

MCDU MENU (Button)>AOC MENU>INIT/PRES>INIT DATA REQ is working for me today 8 Nov after updating the Development version. I tried it before uploading the simbrief flight plan into the flypad and tried it again after uploading it and it has worked on both occassions. However, I admit also not seeing the option recently so I can only assume it's reverted. I could go on but essentailly it's working now.

how does my weight and balance doesnt pop up in mine? and its dark not light

Thanks for the tutorial. Very helpfull. Just one thing. The route on the VFR map seems to be a big mess. And i dont get a green line route on the display. Oh an stock ATC goes completely quiet. Can't even obtain IFR clearance, even if the button is there sometimes. Any ideas? Thanks again.

@scotts6178

2 жыл бұрын

Vatsim my friend

@stjanss

2 жыл бұрын

thanks ;)

i stepped away from this game for months because of constant changes fixes and then breaking of other things. The flighplans with simbriefs weren't working well with this aircraft and it wouldn't follow the waypoints. Is this fixed now? They had done away with the internal flightplans within the msfs because those didn't work then they went to simbrief and those didn't always work either.

@gazzis

Жыл бұрын

Have to say it seems to work well for me as long as you're properly sync'd with Simbrief.

Thank you for publishing this wonderful video. Thanks to you, I learned a lot of things about the A32nx, but unfortunately there was a problem at the SID and STAR stage. I couldn't see these points on departure or arrival section. I'm using latest stable version of FlyByWire a32nx which is v0.10.1 and I am not a Navigraph subscriber. So I don't know if the problem is on the plane or on the flight plan. I've researched but I couldn't find any solution. Could you help me to find out where the problem is?

@gazzis

Жыл бұрын

Glad you liked the video. It’s around 12 months old now so it’s possible some of the navigation points have changed. Which points are you missing?

@oypkah1

Жыл бұрын

@@gazzis I saw STAR for once and it wasn't according to my flight plan. For example Simbrief planned my arrival runway to 24L runway but I could set approaching only for 24R runway. After that, I tried make flights to diffrent airports that always be busy, but it's never worked again :(

When i have done my flight plane in the flt by wire thing and when im loading in to te game in the 320nx is my flight poan a straight like can you pls help me

@gazzis

Жыл бұрын

Not quite sure what you mean I'm afraid.

I have a problem with SID and STARS: simbrief tells me the sid and the star but in the mcdu I can't find the one that it gave me in the planning. I am using the last airac from navigraph and the mcdu is confirming that.

@gazzis

Жыл бұрын

Is Simbrief picking the correct runway? SIDs are specific to runways so they would have to match what your selecting in the MCDU.

@Christian-be4lk

Жыл бұрын

@@gazzis I found a solution selecting the sid according to the transition point written on simbrief

THANK YOU FOR ALL YOUR CLERANCE BUT I FEAL THERE IS PROPLEM WITH ME TO CLCLATION THE decent, AND THE DEGREE FOR IT

@gazzis

Жыл бұрын

I’d suggest you rewatch that section of the video. It does makes sense eventually.

Great video sir! How do you get the low profile on screen panels? flaps, trim, engine, etc.....

@gazzis

Жыл бұрын

If I understand correctly, by using Ctrl-1,2,3,4 etc for pre programed views. Or Alt-1,2 etc for views programmed by you. Use Ctrl-Alt-x to program an Alt key.

@MikeInNorCal

Жыл бұрын

@@gazzis Ok i will try that but on flaps for example, on my screen it shows percentages AND a bar from 0-full. your screen just showed the percentage. so much slimmer than mine. it looks so much better than my gauges.

Hello, im from indonesia. Can u speed up using simrate when cruising using this aircraft? Me… when using default aircraft able to speed up but when using fenix cant :(

@Lengend-cu6ef

2 жыл бұрын

This aircraft is different from the Fenix, which costs money. This one is free

@billB101

Жыл бұрын

You can speed up the sim rate to 2 with the flybywire. Haven't managed to get it any faster than that.

hello, I have followed all the steps and when i press init request- The scratchpad says UPLINK INSERT IN PROG' and doesnt do anything after that. Any assistance will be appreciated.

@gazzis

2 жыл бұрын

Have you managed to upload any flight plan information into the MCDU or flypad from Simbrief?

@Fgswift21

2 жыл бұрын

@@gazzis thank you for getting back. I have fixed the problem by using the stable version of the FBW mod

I'm having trouble with the init request not showing up on the INIT page in the MCDU, any clues?

@nisse4629

Жыл бұрын

turns out that doesnt work when you select an arrival airport in the MSFS menu before loading!

@nisse4629

Жыл бұрын

Got some more issues now haha, i'm trying to copy your flight and after following all your steps im getting a "F-PLN DISCONTINUITY" between LAM and BPK in the flight plan. So essentially i have a gap on the green line on the display. What could be the cause of this?

@nisse4629

Жыл бұрын

also my flight plan stops at "TARTN" and im not seeing the final turn & the runway after entering the sids

How come FBW wont load Dev version? stuck in loading screen

@gazzis

2 жыл бұрын

Can’t help with that one I’m afraid.

@FurtherAM

2 жыл бұрын

@@gazzis I figured it out.. Dev and Ex dont load.. but the stable does? but ppl on update said the stable doesnt work you need to use dev or ex so I completely got turned around

Followed this to the letter, but still cannot get ATC to give me IFR , will not show up , just VFR, will try the stable version to see if thats the problem..

@gazzis

2 жыл бұрын

FS2020 ATC will not work with a SimBrief Flight plan to my knowledge, it has to be fully created in the FS2020 World Map editor. I've just carried out this test. I updated the 32NX today (9 Jul) developer version, opened FS2020. Opened World Map, selected the 32NX, created IFR flight plan EGLL to EGPD (so not simbrief). In Flight Conditions select Multiplayer Off, Air Traffic - Live Traffic, Wx & Time - Live. Fly now gave me the 32NX with the World Map flt plan in the MCDU. Opened ATC window, selected HTW ground, requested clearance and all worked.

@gazzis

2 жыл бұрын

Have to admit, didn't realise a World Map/FS2020 flight plan would transfer into the 32NX MCDU - must be a recently added feature(?).

@Lengend-cu6ef

2 жыл бұрын

@@gazzis I think msfs2020 automatically putting flight plans made on the world map into the mcdu has been a feature for a while. So I assume if you make it in SimBrief but not in the simulator itself, you will have to manually enter your flight plan into the mcdu and file it to be able to get an ifr clearance from the in game atc.

@gazzis

2 жыл бұрын

Mmm not sure you can get FS ATC from a purely Simbrief flight plan. Will try later.

@Lengend-cu6ef

2 жыл бұрын

@@gazzis ah you may be right. would like to hear what you come up with!

help me pls😢😥😭😪