No video

A Step-by-Step Guide to connect accessories to Triumph Scrambler 400x, Speed 400 | NO WIRE TAMPERING

A simple DIY way to connect electrical accessories like Maddog AUX lights, GPS Navigation, or even wireless chargers to your Triumph Scrambler 400x without tampering with existing wirings. No void warranty and no risk of wiring failure due to overload.
In this video, you will:
1. Know the importance of a powered 12-volt source that can be turned off with an ignition.
2. How to locate the power source in the OBD port and tap into the OBD port using the 6-pin connector
3. Wiring the AUX lights using the OBS-powered 12-volt source.
Tools you need:
Multimeter: amzn.to/3RT2jpI
6-pin OBD male socket: amzn.to/41AbzCq

Пікірлер: 53

  • @SRINISEN
    @SRINISEN6 ай бұрын

    Thank you brother. I used this video as reference and did the exact same wiring on Speed 400 to connect maddog scoutx light and it’s really helpful. Now I have 1. power source adapter connected to obd2 port, 2. a line from switch pro connected to obd2 adapter and 3. Positive and negative lines connected to battery terminal all under the seat. Even if I want to stop using fog light, all I need to do is just to remove seat and unplug the connectors. Just 30seconds work to unplug. Thank you 🤩

  • @criticalhit31
    @criticalhit317 ай бұрын

    excellent tutorial mate..you simplified it to the T.

  • @sudarshansudhu765sudhu7
    @sudarshansudhu765sudhu77 ай бұрын

    Thank you for the information. Appreciation is must for your efforts.

  • @suchit369
    @suchit3697 ай бұрын

    This is wonderful, and I really appreciate the tutorial you provided, but can we please have a walkthrough on fitment as well that shows how to tie the harnessing and getting the bike ride ready?

  • @nathandalleave252
    @nathandalleave2527 ай бұрын

    Thanks Som! that was an incredibly helpful bike hack! You sir, are awesome.

  • @som686

    @som686

    7 ай бұрын

    Thanks! I am glad that you found it helpful.

  • @bernardballevre9348
    @bernardballevre934813 сағат бұрын

    Thank you very much for this tutorial. Is it possible to have a link to buy the additional lights? Are the lights delivered with cable and switch? Best regards from France.

  • @udayshome1793
    @udayshome17937 ай бұрын

    Very meticulous. I love how you test at every step to eliminate points of failures. Given how neat your approach is, you can probably spend a bit more and get a Denali Powerhub to connect these accessories.

  • @som686

    @som686

    7 ай бұрын

    I actually tried the Innov Powerhub 3 for setting up a proper 5 connections options but then gave up on it because 1). I won't be adding more accessories to the bike so don't need to spend the extra 7k. 2). The scrambler internals are so densely packed, that finding a spot to fix the powerhub and all the wiring it comes with was going to be a big challenge. But in case you are wondering this is what I experimented with amzn.to/3NT06rZ much cheaper and equally good as the Denali one.

  • @udayshome1793

    @udayshome1793

    7 ай бұрын

    @@som686 I have a CB350 (eyeing the Scrambler 400x) with a similar setup as yours, though the proprietary connectors of Honda make things tricky. I did a parallel one on my friends KTM which has pretty standard 2.8mm std clips along with dedicated one for aux- connections. I was kinda hoping the smaller Triumphs to have those as well (Bajaj). Nice to know about the Innov Powerhub 3, very similar looking Rowe's PDM60.

  • @heyshreyas9
    @heyshreyas97 ай бұрын

    This applies to most of the modern bikes, Thanks for the video.

  • @guruprasadkini5548
    @guruprasadkini55482 ай бұрын

    Thanks for the tutorial. Can you please show the CarPlay installation as well?

  • @vet967
    @vet9677 ай бұрын

    Very useful video , and very well explained,,video quality is good,we hope for more useful videos ,thums up

  • @CharithDrive
    @CharithDriveАй бұрын

    Great and informative. Thanks for the video

  • @vnm_8945
    @vnm_89456 ай бұрын

    Pretty cool! Thanks for the idea!

  • @user-nl6rc8ci8d
    @user-nl6rc8ci8d7 ай бұрын

    Please share the full installation video.

  • @palani4uselvam
    @palani4uselvamАй бұрын

    Nice❤👍🏾

  • @Akash_K
    @Akash_K7 ай бұрын

    Thanks for such a informative video @Som, Also can u also possibly make a video on the installation/ final after install status of both the lights and the carplay for bike, I am sure most of the scrambler buyers would want to have some sort of addon mfd, as the stock cluster just ain't enough😅

  • @maulikjgohel
    @maulikjgohel7 ай бұрын

    can you give me link those products cae playnd light

  • @Jagjeet1707
    @Jagjeet17077 ай бұрын

    👍 very informative thx sir kya aap isi headlight open kar ke bta sakte ha? To change the color of drl led

  • @Jagjeet1707
    @Jagjeet17077 ай бұрын

    Very informative 👍👍 sir kya aap iski headlight open karke video bna sakte to change the drl led light color

  • @APACRIDER
    @APACRIDERАй бұрын

    From obd to that red wire I understood. What is that adapter on red wire which connects your light? Pl advise. In my case I have a wire which is from relay. No adapter. Is it okay to directly connect this wire to that red one from obd?

  • @som686

    @som686

    Ай бұрын

    That is an adapter required to connect to your OBD port. The relay wire can't be directly plugged into the OBD port hence you need to connect the adapter to the relay wire and then plug it into the OBD port. The amazon link is in the description of the video.

  • @APACRIDER

    @APACRIDER

    Ай бұрын

    @@som686 yes I bought the adapter from your link. So now I have to cut the adapter wire and connect the relay wire to this adapter? Which also should match the obd port point where there is supply. Correct?

  • @som686

    @som686

    Ай бұрын

    @@APACRIDER Yes

  • @neo14fix
    @neo14fix7 ай бұрын

    Good job man.

  • @anan7s294
    @anan7s2947 ай бұрын

    Hope there’s a cansmart for new Triumph 400s in future.

  • @som686

    @som686

    7 ай бұрын

    The closest we got now is the Innov Powerhub 3. amzn.to/3TIkwro Its handles upto 5 accessories. But isn’t programmable as the can smart

  • @jaspanackal
    @jaspanackal7 ай бұрын

    Where we can buy carpuride system , Please reply

  • @girishjack
    @girishjack6 ай бұрын

    Hey Som. It's super useful. Done with application of PPF for the tank? Any suggested brand for matte PPF? I'm gonna get one this March, same Khaki Green

  • @som686

    @som686

    6 ай бұрын

    No, I haven't done the PPF. Also, FYI ... if you do PPF it voids the paint warranty that your bike comes with. Yes, Triumph provides 3 years of warranty on your paint job. I heard it straight from the Service center.

  • @ninadbhande6125
    @ninadbhande61257 ай бұрын

    Thanks .. very informative

  • @som686

    @som686

    7 ай бұрын

    Glad it was helpful

  • @RishiRajKoul
    @RishiRajKoul7 ай бұрын

    Good Video

  • @parthgaidhani
    @parthgaidhani7 ай бұрын

    That solves where you can get the required voltage but what about the current? How can you know the max current draw of any of the powerd source?

  • @som686

    @som686

    7 ай бұрын

    Usually there are two parts to this. 1. How much current does your battery provide. Usually 12 volts bike batteries provide 20 amph. 2. But more importantly how much current draw can your wiring support that connects the battery to the accessories. Usually modern bike wiring support upto 10-15 amph. That is another reason why it is recommended to use a power source that is not being used by other electrical systems already. Since the one I am using is an unused port I am sure it can support upto 10 amps atleast which is more than what the AUX lights need. Now if you want to use multiple accessories here, it would be recommend to use a power hub that is connected to the battery directly and the relay if the power hub is connected to the OBD power supply. The same way I connected the harness pro in the video. Relays are safe as they draw milliamperes of current to operate, lot less than what the wires can provide. Hope this helps

  • @kd9001
    @kd90017 ай бұрын

    Brother where did you purchased carplay device, can you please share some details

  • @som686

    @som686

    7 ай бұрын

    I got it from US via there website carpuride.com

  • @steffanajayajay
    @steffanajayajay7 ай бұрын

    Do you suggest getting the scram or ktm adventure - my purpose is 70% city and 30% long rides with wife sometimes the kid too (maybe shorter ride) - do you suggest scram ?

  • @som686

    @som686

    7 ай бұрын

    I haven’t ridden the KTM but Scrambler isn’t suitable for 3 passengers. The pillion seat is small and can accommodate a petite pillion.

  • @dustydeepu
    @dustydeepu7 ай бұрын

    Where did you buy the car play system ?

  • @som686

    @som686

    7 ай бұрын

    carpuride.com/products/carpuride-w502-wireless-portable-dual-bluetooth-waterproof-ip67-motorcycle-stereo?_pos=1&_sid=bbfbe0236&_ss=r

  • @yungdaddydk
    @yungdaddydk7 ай бұрын

    please make a separate video about the bike CarPlay system

  • @balamurali4164

    @balamurali4164

    6 ай бұрын

    Yes , that would be great

  • @ajpee8841
    @ajpee88416 ай бұрын

    Nice video! This could have been very helpful if you made this video in english. or can you make the caption in english? thank you from Ph!

  • @ritu4277
    @ritu4277Ай бұрын

    Power Supply from OBD port is a worst idea

  • @som686

    @som686

    Ай бұрын

    It’s not the power supply. It’s just an active voltage signal to activate the relay. The power supply is from the battery.

  • @ritu4277

    @ritu4277

    25 күн бұрын

    That's what I am saying taking constant voltage supply for non genuine accessories from OBD is the worst decision. You could blow the fuse box or short circuit the ECM as well.

  • @ritu4277

    @ritu4277

    25 күн бұрын

    The port is for connecting diagnostic tools, not for fitment of any other voltage supply.

  • @som686

    @som686

    25 күн бұрын

    @@ritu4277 ok you are right.

  • @kumarroshan6551
    @kumarroshan65515 ай бұрын

    Can you share your whatsapp number. I have this bike also..mere ko kuch help chea the

  • @utkarshgovekar

    @utkarshgovekar

    4 ай бұрын

    kzread.infooUZit52YoNk?si=5rmxD992owfegWBT

Келесі