Bumpin some Ant Banks I hear! RESPECT💯

@sissypie8360

2 жыл бұрын

Old school here, 43 years old last great generation.

Sir I have a question those wires that you loot can you explain what what you did and what’s the reason I would really appreciate it you have a blessed day and that’s one beautiful ride

Great video! Thanks not many vids out there. Did you do anything special with the rear end? Panhard bar etc?

@buffalow64

3 жыл бұрын

Adjustable panhard bar. It sorta works. Just get a wishbone, y bone what ever you wanna call it because that's the simplest way to center it.

Did you have to drill holes in the firewall for the airline and power wire ?

What air bag system did you go with ?

Nice Ride! Where did you get that plate for your 6X9 Speaker in the front? That replaces the air vents right?

@buffalow64

3 жыл бұрын

I made them out of thin sheet metal from a old metal shelf. Traced the air vent on it and cut it out with a cut off wheel on a grinder or a metal blade on jigsaw.

Gotta ask, Is your manifold 1/2 or 3/8's going to 1/2 Lines? Taking notes. Thanks for the vid upload.

@buffalow64

3 жыл бұрын

The solenoids are 1/2 if that's what you're asking? I'm running separate solenoids not a manifold.

That’s a clean setup. I just don’t get why you tucked the compressors behind the seat. They do get hot from running. Kind of scary for me.

What brand of air ride did you use and how does it work while driving? Meaning can you activate it while moving or not

@buffalow64

3 жыл бұрын

I pieced it together myself. It works all the time as long as the key is forward.

@buffalow64

3 жыл бұрын

@@229leatherface yes, as long as the keys are in the ignition and on.

How much did the system cost you

What brand alternator is that..and where can I get one... is the pigtail factory from 64

@buffalow64

3 жыл бұрын

It was a ebay one, I can't remember how many amps but its over 100. The pigtail I bought from advanceauto its a generic gm one.

@joetrevino261

3 жыл бұрын

@@buffalow64 was the alternator for an 64 impala or did u use another year

@buffalow64

3 жыл бұрын

@@joetrevino261 I have to go back and look at my ebay purchases and I can let you know. It was awhile ago. I works great though, no dimming lights, running 2 viairs no problem at all.

@joetrevino261

3 жыл бұрын

@@buffalow64 ok let me know thanks

@buffalow64

3 жыл бұрын

So it was a chevy 105 amp high output 3 wire. Basically its a Delco 10si alternator. Grab a 10si pigtail from autozone and your good to go.

Hey brother . Is the pvc pipe necessary? I'm running my lines tomorrow

@buffalow64

3 жыл бұрын

I'm not sure if your asking about it on the line from the firewalls or down to the back? Nothing is really necessary its just trying to think ahead and prevent potential problems if that makes sense.

@PeachCoastLowrider

3 жыл бұрын

@@buffalow64 yeah man i hear ya. I got some grommets im gonna try

@PeachCoastLowrider

3 жыл бұрын

@@buffalow64 hey man i wanna drill my firewall holes exactly where you did, do you mind sending me pictures of where you did yours ? Hard to tell here! I'd really appreciate it 🤙 Adam63impala@gmail.com

@buffalow64

3 жыл бұрын

@@PeachCoastLowrider I can't remember but I think I drilled a pilot hole from the inside to see where it comes through in the engine bay.

@PeachCoastLowrider

3 жыл бұрын

@@buffalow64 hey man what exactly will drill though the fire wall ? Never done this before !

You had to drill a hole in the top of the control arm ?

@buffalow64

3 жыл бұрын

Yes, I drilled it

@PeachCoastLowrider

3 жыл бұрын

@@buffalow64 just did mine today ! Just like yours . Still need to drill thru the fire wall and wire it all up . Bot got all the bags mounted.. good grief im exhausted tho

what kit is that from or called

@buffalow64

3 жыл бұрын

I pieced it together myself

You still have shocks?

@buffalow64

3 жыл бұрын

Just the rears, fronts are not installed and rides fine.

@PeachCoastLowrider

3 жыл бұрын

@@buffalow64 yeah im hoping mine rides okay without shocks in the front ..dont wanna drill more holes

@PeachCoastLowrider

3 жыл бұрын

@@buffalow64 its not really floaty?

@buffalow64

3 жыл бұрын

@@PeachCoastLowrider no, I mean over big bumps it can be a little but try it first without and then you can always add them later if you don't like the ride.

@PeachCoastLowrider

3 жыл бұрын

@@buffalow64 yeah they came with my kit but I'm gonna try it first. Was worried about being bouncy. Of course some say its too bouncy.

Those hoses look like crap. I ran mine underneath used metal strap that are coated in rubber and ran it through the frame to a 90 elbow fitting. I also used rubber hose over the plastic line anywhere it might rub anything. Ran the 4ga power wire underneath as well with fuses on each end and a circuit breaker for tge compressors.