Just taking out the Impala for gas is a little cruise and relaxing for the soul. 😎🎉🙏🏽😇👍.

@El_Ceza

2 жыл бұрын

Thats right!

Clean setup an 62 bro. I went with bags also. Almost no maintenance for the most part.

@El_Ceza

Жыл бұрын

Thanks bro , oh yeah almost maintenance free

Nice set up

@El_Ceza

Жыл бұрын

Thank you 🙏🏼

Clean set up

Super cleanvsetup!!!! Luv It!!

@El_Ceza

4 ай бұрын

🙏🏼

Looking good thanks for sharing.

@El_Ceza

2 жыл бұрын

Sure thing, started an ig bro El_ceza uploaded some pictures of the car

@rayflores8411

2 жыл бұрын

@@El_Ceza cool I'll ad you

@rayflores8411

2 жыл бұрын

Right on

Nice job dude

@El_Ceza

8 ай бұрын

Thank you !

@rrmarbleandgranite5780

8 ай бұрын

@@El_CezaQuestion do you have stock wiring harness?

@El_Ceza

8 ай бұрын

Previous owner changed it out

Clean bro.

@El_Ceza

Жыл бұрын

Thank you brother!

Nice ride bro.i cant wait to lay the frame and install my supercharger in my 62

@El_Ceza

7 ай бұрын

🙏🏼

Nice!!

The pride is that YOU know how to do it !!! How much is a setup for air ride ¿ Corvette under that car cover ¿ Well done !!!

Bro. Please please put jacksstands under any airlifted ride before crawling underneath. Nylon lines are prone to burst unexpectedly since they're standard operating range is 280psi or 320 degrees. I've burst a fewyaelf with the car just sitting at gas stations locked up.

@El_Ceza

2 жыл бұрын

Thanks for the feedback i noticed that when i was editing video

Hey what size pump stopped did you have to put so it wouldn't hit on the wheels from the fender

@El_Ceza

Жыл бұрын

Im not running any It sits perfectly when layed out

I meant to say what size bump stop did you put did your wheels hit the fender when you were laid out

@El_Ceza

Жыл бұрын

Oem

Nice🔥❤️thanks for sharing, where did u get you 9 Gallon tank?

@El_Ceza

Жыл бұрын

Thank you 🙏🏼 Im sorry its a 8 gallon 9 port tank here is the link amzn.to/3ZzGVqB

So the Y bone eliminates the panhard bar?

@El_Ceza

Жыл бұрын

Correct it eliminates side shift on differential when going up and down on your rear suspension

What gauge wire you used to power up 2 relay for compressor and how did you route it.

@El_Ceza

2 жыл бұрын

4 gauge and i came in from the firewall ran it under carpet to the back

@osejosteveo

2 жыл бұрын

Thanks for replying back

@El_Ceza

2 жыл бұрын

No problem

Telling someone not to hit your airbags just doesn't have the same ring to it 🤔

I have a 61 impala I also live in Texas . Having trouble with heating up .. whats the part number on that radiator ..

@El_Ceza

2 ай бұрын

amzn.to/3Qdr7Yx

Did you have two blue wires on your controller I have the same controller I have one baby blue and one dark blue

@El_Ceza

Жыл бұрын

Yes i did Since i went with reverse orientation i did Light blue- all fill Blue- right front fill

Where did you get the extensions for the a arms.

@El_Ceza

Жыл бұрын

I got them off ebay

👍🏽

👍😎👍 nice work, I'm looking to do that Wishbone set up in a 59 Bel Air, can you list where I could get one...thanks 👌

@El_Ceza

Жыл бұрын

Here is the link where i purchased my wishbone the offer big variety of quality suspension products www.bcfab.com/58-64-Impala_c_645.html

@bpa3697

Жыл бұрын

@@El_Ceza 🙋‍♂️ got the link👌 They have some cool products, thanks for the help, ill reach out to you with some questions when it time to bag it...👍

@El_Ceza

Жыл бұрын

@@bpa3697 no problem! Sure thing

Why did you add balljoint spacers? For lift? How does it ride with no front shocks?

@El_Ceza

Жыл бұрын

Yes for lift A bit bouncy depending how much pressure you have in the bags I do need to add some shocks it would make it alot smoother

@adamfonzarelli8318

Жыл бұрын

Im about to do the exact same setup on.my 61 right now. I love how you rewired the avs switchbox in reverse like that

@El_Ceza

Жыл бұрын

@@adamfonzarelli8318 nice, Insta shouldn’t be so bad Yeah I didn’t like how the wire would’ve curved on top that’s why I reversed it for cleaner tuck Good luck with the install

quick question for you i just installed air ride in my car when i drain the tank everytime my car is all the way up it drops down when im draining my tank is that normal??

@El_Ceza

Жыл бұрын

Not normal sounds like you either did not set up your solenoids on the correct position on your 4 way blocks or a solenoid is stuck open or leaking by

@streetclasscc5189

Жыл бұрын

@@El_Ceza i thought it was normal that the valves need back pressure to stay closed its a 2 piece manifold type valves (block) one for front one for the back i just installed them brand new when i had the paddle switch i could drain my tank and my car would stay locked up

@El_Ceza

Жыл бұрын

@@streetclasscc5189 not normal for car to air out when you drain your tank Once you activate valves to air up bag air stays in line so there is no way for air to return to tank When you dump air should go to atmosphere I can only help you out so much without seeing your set up and how it is wired

do you have links or places to shop for the champion radiator and 2 fans with shroud kit?

@El_Ceza

Жыл бұрын

I sure do here is link www.jegs.com/i/Champion-Cooling-Systems/166/CC281K/10002/-1

@sixtreypete

Жыл бұрын

@@El_Ceza awesome dude thanks so much!!!!!

@El_Ceza

Жыл бұрын

@@sixtreypete no problem

You don’t have rear bump stops?

@El_Ceza

Жыл бұрын

I do not i need to install some poly stops

Ware did you buy the air tank?

@El_Ceza

7 ай бұрын

amzn.to/3sTWbDU

Why didnt u install the angle fittings so it rubb by the headers

@El_Ceza

7 ай бұрын

Wanted less restriction on the air flow for harder hit

@juliosandoval8244

7 ай бұрын

@@El_Ceza oh ok my buddy does full air ride at his shop he does angle fittings makes it look clean

@El_Ceza

7 ай бұрын

@juliosandoval8244 if you just want a clean look those fittings are the way to go

You’re running 1/2” lines correct?

@El_Ceza

2 жыл бұрын

Yes, correct

@carloszapien8174

2 жыл бұрын

@@El_Ceza how do you like them? How’s the rise and drop on the vehicle? Is it quick? I’m not sure whether to run 1/4” or 1/2” lines on my 64 Impala frame off. Just want to get some insight.

@El_Ceza

2 жыл бұрын

@@carloszapien8174 i love the 1/2” lines it hits hard and dumps fast you dont have to sit there and wait like you would with 1/4” lines

Are u running ss7's to the back? Or do u have ss8's?

@El_Ceza

2 жыл бұрын

Ss7 all around

@rayflores8411

2 жыл бұрын

@@El_Ceza right on

@PeachCoastLowrider

2 жыл бұрын

@@El_Ceza I'm looking at the ss7 too .I have air lift now . my 63 is a lil bouncy . I'm also looking at a 9 gallon tank . how long does it take to fill up with just the 2 comp?

@El_Ceza

2 жыл бұрын

@@PeachCoastLowrider it takes about 15 mins from empty but im running 200 psi, i left my stock rear shocks on and its not bouncy only up front a bit due to no shocks yet

@PeachCoastLowrider

2 жыл бұрын

@@El_Ceza I need your exhaust guy lol I had mine custom done and it still.hangs

You have a 9 gallon tank?

@El_Ceza

Жыл бұрын

Yes

@victornatividad

Жыл бұрын

@@El_Ceza did you piece it together or did you buy a kit ?

@victornatividad

Жыл бұрын

@@El_Ceza all I see is 8 gal

@El_Ceza

Жыл бұрын

I put the kit together myself

@El_Ceza

Жыл бұрын

Must be an 8 gallon bro Its been a while since i purchased it

Quien instalo las bolsas

@El_Ceza

Жыл бұрын

Yo hice la instalación del sistema

@djwizardpatino8240

Жыл бұрын

@@El_Ceza que bien me gustaria ponerle bolsas a mi 63 donde compraste las partes

@El_Ceza

Жыл бұрын

Se siente bien suave, compre las partes en diferentes websites no es un Kit que venden mas si los hay

What's your IG?

@El_Ceza

3 жыл бұрын

I do not have one Ray, sorry

@rayflores8411

3 жыл бұрын

@@El_Ceza ah ok cool

Nice set up

@El_Ceza

Жыл бұрын

Thank you 🙏🏼